Search Results (390)

The burgeoning convenience food sector, particularly in China, has intensified demand for packaging that simultaneously delivers convenience, environmental sustainability, and functional performance. This study addresses this need by developing a novel self-sealing, rapidly soluble food packaging film. The film was prepared using solvent casting technology, with a konjac glucomannan (KGM) matrix as the base material and gelatin (Gel) and hydroxypropyl tapioca starch (HS) as reinforcing agents. Leveraging the thermoplastic effect of HS (its hydroxypropyl side chains disrupt the ordered hydrogen bond network of KGM and Gel, enhancing molecular chain mobility) characterization via FTIR and SEM confirmed successful heat-sealing upon HS incorporation, while dissolution testing validated enhanced dissolution kinetics. The optimal formulation (KGH₃) exhibited superior mechanical properties (tensile strength (TS): 17.54 MPa) and excellent barrier performance against both light and oxygen transmission compared to pristine KGM and KG control films. Self-sealed pouches fabricated from KGH films preserved edible oil for 65 days, maintaining peroxide values within acceptable limits and demonstrating 48.7% reduction in oxidation compared to KG films. These findings establish KGM–Gel–HS film as promising candidates for adhesive-free, biodegradable packaging of lipid-rich foods. Full article

Sustainable nanotechnologies derived from renewable resources are increasingly being positioned at the interface of green chemistry, advanced drug delivery, and translational pharmaceutics. Over the past decade, lignocellulosic nanomaterials, chitin/chitosan platforms, polysaccharide-based nanogels and nano-enabled hydrogels, lignin- and polyphenol-derived nanostructures, and bio-based lipid nanocarriers have been engineered through progressively eco-efficient routes, including solvent-minimized self-assembly, nanoprecipitation, spray drying, hot-melt extrusion, and microfluidic-assisted fabrication. This work provides a structured evidence map of nano-enabled drug delivery and therapeutic platforms derived from renewable biological resources. Specifically, we aim to (i) identify and classify nanoplatform classes and renewable feedstocks; (ii) summarize reported pharmaceutical critical quality attributes (CQAs) and performance and safety endpoints; and (iii) appraise how “renewability” and “green” claims are evidenced (feedstock origin vs. process sustainability) and how frequently translational readiness factors (scalability, quality control, regulatory alignment) are addressed. We critically compare renewable and conventional nanomaterial platforms across key translational dimensions, including carbon footprint, batch consistency, biodegradability, functional tunability, safety/persistence, and scale-up maturity. Finally, we delineate a practical translational pathway—from biomass sourcing and fractionation to nanoformulation, characterization/stability, and GMP scale-up—highlighting cross-cutting enablers such as lifecycle assessment, EHS/toxicology risk assessment, quality-by-design, and regulatory alignment. Collectively, the evidence supports renewable nanomaterials as viable, scalable candidates for next-generation therapeutics, provided that variability control, standardized characterization, and safety-by-design principles are embedded early in development. Full article

Biodegradable nanocomposite materials possessing self-healing behavior are emerging as an attractive option of being used in advanced mechatronic systems. The current study is focused on a thorough examination of the micromechanical properties of graphene–reinforced polylactic acid (PLA)/polycaprolactone (PCL) composite samples, followed by estimation of their self-healing behavior upon heating. Polymer blend–based nanocomposite materials were prepared using the green and reliable in terms of good nanofiller dispersion melt extrusion method. 3D printed nanocomposite specimens with impeccable flatness were subjected to fine microscratch testing by applying a constant force experimental mode. The surface resistance of the three-component polymer materials against the lateral movement of the stylus fulfilling the scratch and the impact of the dual-phase PLA/PCL ratio on the nanocomposite mechanical performance were estimated by calculation of the coefficient of friction (COF = F_x/F_z). COF values in the range of 0.8–1.4 indicated excellent nanocomposite resilience against scratch. Creating a heterogeneous polymer system that combines phase-separated soft and hard domains with close melt and glass transition temperatures, respectively, may facilitate the physical flow of macromolecular chains into voids or free volume areas. This aspect can be critical in the achievement of thermally–induced self-healing properties of the composite material. Scanning electron microscopy (SEM) imaging of the microscratches, made before and after Joule heating of the polymer samples, revealed a significant degree of surface recovery and a sensible reduction in the width of the adjusted scratch grooves. Full article

The 4D printing of thermo-responsive shape-memory multicomponent polymer composites, which possess the ability to change shape by exposure to heat, has attracted much attention in recent years because of their scientific and technological significance. In the present study, we investigate shape memory performance of a polylactic acid-polycaprolactone-graphene nanocomposite activated directly by increasing the environmental temperature and indirectly, by Joule heating. The incorporation of graphene within the shape-memory biopolymer blend allowed formation of a programmable conduction path, whose electric properties are intimately coupled to thermo-mechanical processes. Advanced rheological, thermal, and thermo-mechanical properties were evaluated and related to the structure of nanocomposite. The electrically and thermally stimulated shape memory and self-healing behavior of the nanocomposite based on polycaprolactone/poly(lactic) acid blend reinforced with graphene nanoplatelets (PCL/PLA/GNP) were investigated. The shape memory tests revealed a good reversibility of 76% between the temporary and permanent states of the samples bent to 180 degrees and a high healing efficiency of 96% if stimulated by Joule heating. The highly electroactive nanocomposite demonstrated a great potential for 4D-printing of objects with complex structures, shapes, and electrically-stimulated shape-memory and self-healing functions. The nanocomposite is biodegradable, recyclable, and reusable, which may reduce the carbon footprint of the rapidly developing additive technology. Full article

In this work, compatibilized poly(lactic acid)/poly(butylene adipate-co-terephthalate) (PLA/PBAT) blends were developed and characterized, to be potentially utilized as biodegradable self-healing matrices for composite laminates. Blends containing 10, 20 and 30%wt of PBAT and 0.5 phr of an epoxy-based compatibilizer were prepared by melt compounding and hot pressing. Rheological measurements showed that moduli and complex viscosity generally increased with PBAT content, while maintaining viscosity levels suitable for conventional melt-processing operations. FT-IR and FESEM analyses confirmed the formation of an immiscible but well-compatibilized morphology, characterized by a homogeneous dispersion of PBAT domains within the PLA phase. Mechanical tests revealed a decrease in tensile modulus (up to 44%), strength (up to 45%) and fracture toughness (up to 40%) with a PBAT content up to 30%wt. Self-healing was evaluated by measuring the fracture toughness (K_IC) recovery after thermal treatment at 140 °C. After healing, the blend containing 20%wt of PBAT exhibited a self-healing efficiency of 64% under impact conditions, which was attributed to the smoother fracture surface generated at an elevated strain rate that facilitated a more effective flow of the molten PBAT phase across the crack interface during healing. The formulation containing 20%wt of PBAT featured the best balance between mechanical performance and self-healing efficiency. Full article

Protein-based nanocarriers have gained considerable attention for targeted cancer theranostic applications due to their inherent biocompatibility, biodegradability, and facile functionalisation. In addition, some of their properties, such as self-assembling nature, low immunogenicity (if species matched), molecular recognition ability, and lack of persistence due to degradation into proteinogenic amino acids, make them highly suitable for oncology-related applications. Each protein-based nanocarrier exhibits unique physicochemical and biological properties. In this review, we summarise recent advances in targeted protein-based nanocarriers, including albumin, lipoproteins, ferritin, viral protein capsids, fibrin type proteins and silk proteins, emphasising receptor-specific targeting mechanisms, the integration of various imaging modalities along with their advantages and limitations, and the importance of employing advanced preclinical models for translational theranostic applications. This review also discusses the most recent and significant studies in the field, providing useful insights into future directions of protein-based nanocarriers for cancer theranostics. Full article

The environmental degradation of plastics results not only in their mechanical fragmentation into microplastics (MPs), but also in polymer main-chain scission processes, causing continuous leaching and/or volatilization of low-molecular-weight species, often characterized by a hazardous profile. In this study, we investigated the hydrophilic photooxidation products (HyPOPs) generated upon UV irradiation of polystyrene (PS) and their transformation catalyzed by the enzyme laccase from the fungus Trametes versicolor. Through a series of enzymatic tests, the enzyme was found to promote coupling and conjugation reactions of HyPOPs into poorly soluble compounds mimicking natural humic acids. The enzymatic activity of laccase was studied under different experimental conditions to simulate those found in environmental matrices. Due to their oligomeric nature, these humic acid-like products of metabolic transformation by the fungal laccase are here nicknamed “mycoplastics” (i.e., polymers from fungi). This enzymatic biodegradation and biotransformation of xenobiotic HyPOPs highlights the role of specific enzymes as biological tools for environmental self-repair of polluted ecosystems. Moreover, it opens new perspectives for remediation strategies targeting elusive micro- and nanoplastics and their continuously generated hazardous molecular degradation by-products. Humic acid-like products resulting from laccase conversion of HyPOPs could contribute to the rehabilitation of contaminated sites by promoting the removal of toxic contaminants from soil and water. Full article

Staphylococcus aureus, particularly its multidrug-resistant strains, poses a critical biological hazard throughout the global food supply chain, underscoring the need to transition from inert petroleum-based packaging to active, biodegradable alternatives. This review presents a comprehensive analysis of the structure function relationships and interfacial interaction mechanisms that govern polysaccharide-, protein-, and lipid-based films designed for the targeted inhibition of S. aureus. We critically evaluate the extent to which the intrinsic molecular features—such as the polycationic charge density of chitosan and the amphiphilic self-assembly of fatty acids—determine baseline antibacterial activity. A key contribution of this work is the elucidation of three synergistic pathways: physical barrier effects, chemical interference, and biological regulation. Furthermore, we discuss how composite systems, such as polysaccharide lipid hybrids and protein nanomaterial scaffolds, exploit charge complementarity and controlled-release kinetics to surpass the performance limitations of single-component materials. Finally, we address the critical trade-offs between mechanical integrity and antimicrobial efficacy, proposing a roadmap for intelligent, stimuli-responsive packaging that is capable of responding to microbial metabolic cues. Overall, this review provides a theoretical foundation for the rational design of high-performance biodegradable films to safeguard global food safety. Full article

In the face of rising antimicrobial resistance, food insecurity, and climate change, bacteriophages are gaining renewed attention as promising biological alternatives to antibiotics across human, animal, and plant health sectors. Their high specificity, self-replicating capacity, and biodegradability make them valuable tools for combating antimicrobial or pesticide resistance and promoting sustainable biocontrol. This review discusses commonly accepted selection criteria for therapeutic phages, such as avoiding temperate types and screening for undesirable genes, while acknowledging ongoing debates and exceptions in specific clinical or ecological contexts. An overview of phage-based applications within a One Health framework is provided, spanning human medicine, veterinary practice, aquaculture, food safety and crop protection. Particular attention is given to agricultural biocontrol, where several successful plant protection strategies are highlighted, illustrating the feasibility and diversity of phage-based approaches. Despite their potential, key challenges remain regarding phage stability, formulation, and persistence under environmental conditions. Emerging innovations such as encapsulation, carrier bacteria, and protective formulations aim to enhance field performance. Furthermore, this review emphasizes the need to assess the environmental safety of phage applications, particularly their impacts on natural ecosystems, microbial communities, and ecological functions. Finally, the regulatory and policy challenges that currently limit the large-scale deployment of phages, particularly in the European Union, where they remain evaluated under conventional chemical pesticide frameworks are discussed. The development of dedicated regulatory pathways, better adapted to the specificities of phages, is argued to be essential for supporting their integration into agroecological transition strategies and next-generation antimicrobial policies. Full article

Metal–organic frameworks (MOFs) are among the most structurally diverse classes of crystalline nanomaterials, offering exceptional tunability, porosity, and chemical modularity. These characteristics have positioned MOFs as promising platforms for nanomedicine, bioimaging, and integrated nanotheranostic applications. However, the rational design of MOFs that satisfy stringent biomedical requirements, including high drug loading capacity, controlled and stimuli responsive release, selective targeting, physiological stability, biodegradability, and multimodal imaging capability, remains challenging due to the vast combinatorial design space and the complex interplay between physicochemical properties and biological responses. The objective of this review is to critically examine recent advances in artificial intelligence approaches based on Transformer architectures for the design and optimization of MOFs aimed at next-generation nanotheranostics. In contrast to prior reviews that broadly survey machine learning methods for MOF research, this article focuses specifically on Transformer-based models and their ability to capture long-range, hierarchical, and multiscale relationships governing MOF structure, chemistry, and functional behavior. We review state-of-the-art models, including MOFormer, MOFNet, MOFTransformer, and Uni MOF, and discuss graph-based and sequence-based representations used to encode MOF topology and composition. This review highlights how Transformer-based models enable predictive assessment of properties directly relevant to nanotheranostic performance, such as adsorption energetics, framework stability, diffusion pathways, pore accessibility, and surface functionality. By explicitly linking these predictive capabilities to drug delivery efficiency, imaging performance, targeted therapeutic action, and combined diagnostic and therapeutic applications, this work delineates the specific contribution of Transformer-based artificial intelligence to biomedical translation. Finally, we discuss emerging opportunities and remaining challenges, including generative Transformer models for inverse MOF design, self-supervised learning on hybrid experimental and computational datasets, and integration with autonomous synthesis and screening workflows. By defining the scope, novelty, and contribution of Transformer-based design strategies, this review provides a focused roadmap for accelerating the development of MOF-based platforms for next-generation nanotheranostics. Full article

The growing demand for sustainable and distributed energy solutions has driven increasing interest in triboelectric nanogenerators (TENGs) as platforms for energy harvesting and self-powered sensing. Biowaste-based triboelectric nanogenerators (BW-TENGs) represent an attractive strategy by coupling renewable energy generation with waste valorization under the principles of the circular bioeconomy. This review provides a comprehensive overview of BW-TENGs, encompassing fundamental triboelectric mechanisms, material categories, processing and surface-engineering strategies, device architectures, and performance evaluation metrics. A broad spectrum of biowaste resources—including agricultural residues, food and marine waste, medical plastics, pharmaceutical waste, and plant biomass—is critically assessed in terms of physicochemical properties, triboelectric behavior, biodegradability, biocompatibility, and scalability. Recent advances demonstrate that BW-TENGs can achieve electrical outputs comparable to conventional synthetic polymer TENGs while offering additional advantages such as environmental sustainability, mechanical compliance, and multifunctionality. Key application areas, including environmental monitoring, smart agriculture, wearable and implantable bioelectronics, IoT networks, and waste management systems, are highlighted. The review also discusses major challenges limiting large-scale deployment, such as material heterogeneity, environmental stability, durability, and lack of standardization, and outlines emerging solutions involving material engineering, hybrid energy-harvesting architectures, artificial intelligence-assisted optimization, and life cycle assessment frameworks. Full article

Wildfires are increasingly frequent and intense due to climate change, resulting in degraded soils with diminished microbial activity, reduced water retention, and low nutrient availability. In many regions, previously restored areas face repeated burning events, which further exhaust soil fertility and limit the potential for natural regeneration. Traditional reforestation approaches such as seed scattering or planting seedlings often fail in these conditions due to extreme aridity, erosion, and lack of biological support. To address this multifaceted problem, this study proposes a living, biodegradable hydrogel that integrates an engineered soil-beneficial microorganism consortium, designed to deliver beneficial compounds and nutrients combined with endemic plant seeds into a single biopolymeric matrix. Acting simultaneously as a biofertilizer, soil conditioner, and reforestation aid, this 3-in-1 system provides a microenvironment that retains moisture, supports microbial diversity restoration, and facilitates plant germination even in nutrient-poor, arid soils. The concept is rooted in circular economy principles, utilizing polysaccharides from food industry by-products for biopolymer formation, thereby ensuring environmental compatibility and minimizing waste. The encapsulated microorganisms, a Bacillus subtilis strain and a Nostoc oryzae strain, are intended to enrich the soil with useful compounds. They are engineered based on synthetic biology principles to incorporate specific genetic modules. The B. subtilis strain is engineered to break down large polyphenolic compounds through laccase overexpression, thus increasing soil bioavailable organic matter. The cyanobacterium strain is modified to enhance its nitrogen-fixing capacity, supplying fixed nitrogen directly to the soil. After fulfilling its function, the matrix naturally decomposes, returning organic matter, while the incorporation of a quorum sensing-based kill-switch system is designed to prevent the environmental escape of the engineered microorganisms. This sustainable approach aims to transform post-wildfire landscapes into self-recovering ecosystems, offering a scalable and eco-friendly alternative to conventional restoration methods while advancing the integration of synthetic biology and environmental engineering for climate resilience. Full article

The growing global production of plastic, which reached 460 million tonnes in 2022 and has projections of 5.4 million tonnes of waste by 2050 without intervention, has created a severe environmental crisis that demands the development of sustainable alternatives. In this context, this study aims to characterise biodegradable films based on cassava starch and gellan gum, combining microstructural and mechanical properties with the evaluation of thermo-optical parameters. An important advance was the pioneering application of a self-normalised photoacoustic technique, used for the first time to measure thermal diffusivity (0.0013 ± 0.0002 cm²/s) and optical absorption coefficients (at 660 nm) as a function of different concentrations of aniline blue. The results validate the material, which showed high solubility (89.23 ± 1.03%) and crystallinity of 27.40 ± 1.68%. The film demonstrated remarkable biodegradability, losing almost all of its weight (98.30 ± 1.01%) in just 15 days. The measurement of the optical absorption coefficients (at 660 nm) confirmed a linear relationship with the concentration of aniline, validating Beer–Lambert’s law and providing the absorptivity of the dye within the solid matrix—something inaccessible with conventional methods. In conclusion, these films offer significant potential as a viable ecological substitute for single-use plastics, contributing significantly to mitigating the global impact of plastic waste. Full article

Hydrogels are three-dimensional hydrophilic network structures with one or more polymers cross-linked, with excellent biocompatibility, drug-carrying function, and biodegradability. Meanwhile, skin wound repair includes hemostasis and coagulation, an inflammation stage, a proliferation stage, and a remodeling stage. Therefore, hydrogels loaded with natural products are widely used in repairing skin wounds through various mechanisms such as hemostasis, antibacterial activity, anti-inflammatory activity, angiogenesis promotion, skin regeneration, and skin repair monitoring. In addition, this study provides the cross-linking mechanism (physical cross-linking and chemical cross-linking) and construction mode (self-assembly and physical parcels) of the loaded natural product hydrogel. In general, the purpose of this paper is to comprehensively understand the mechanism and preparation strategy of hydrogels loaded with natural products for skin repair and provide theoretical reference for future skin repair research. Full article

Mycelium-based composites are self-grown biodegradable materials, made using agricultural residue fibers that are inoculated with fungi mycelium. The mycelium forms an interwoven three-dimensional filamentous network, binding every fiber particle together to create a rigid, lightweight composite material. Although having potential in packaging and in the construction industry, mycelium composites encounter molding limitations due to fiber size and oxygen access which hinder design capabilities and market engagement. To cope with these limitations, this study reports an alternative way to form mycelium composite using cut precultivated mycelium composite panels, laminated to biologically fuse into a unique assembly. By controlling the growth conditions of the mycelium network, it is possible to adjust physical properties such as flexural strength and strain energy density. These mycelium composite panels were fabricated from hemp fibers and Ganoderma lucidum mushroom. Seven different growth conditions were tested to increase layer adhesion and create the strongest assembly. Three-point flexural tests were conducted on ten samples extracted from each assembled panel triplicate set. The data collected in this study suggested that cultivating an opaque layer of mycelium on the surface of the panel before stacking can enhance total strain energy density by approximately 60%, compared to a single-layer mycelium composite of identical size. In addition, this eliminates abrupt material failure by dividing failure behavior into multiple distinct stages. Finally, by layering multiple thinner layers, the resulting mycelium composite could contain even higher mycelium proportions exhibiting augmented mechanical properties and higher design precisions opening market possibilities. Full article