Search Results (17)

The molybdenum-catalyzed enantioselective ring-closing metathesis/kinetic resolution of a series of racemic planar-chiral 1,1′-diallylferrocene derivatives was reinvestigated utilizing the method of generating catalytically active chiral molybdenum-alkylidene species in situ, which allowed us to examine a variety of chiral molybdenum-alkylidene metathesis precatalysts in the present asymmetric reaction. With the catalyst screening experiments conducted in this study, the more practical reaction conditions, including a choice of a proper chiral molybdenum precatalyst, giving planar-chiral ferrocenes of higher enantiomeric purity and better chemoselectivity could be optimized. Full article

Recently discovered cis-dichloro benzylidene phosphite complexes are latent catalysts at room temperature and exhibit exceptional thermal and photochemical activation behavior in olefin metathesis reactions. Most importantly, the study of these catalysts has allowed their introduction in efficient 3-D printing applications of ring-opening metathesis derived polymers and the control of chromatically orthogonal chemical processes. Moreover, their combination with plasmonic Au-nanoparticles has given rise to novel smart materials that are responsive to light. Given the importance of the ligand shell in the initiation and reactivity behavior of this family of complexes, we set out to investigate the effect of anionic ligand exchange. Thus, we report herein two new ruthenium benzylidene benzylphosphite complexes where the chloride anionic ligands have been replaced by bromide and iodide anions (cis-Ru-Phos-Br₂ & cis-Ru-Phos-I₂). The thermal and photochemical activations of these dormant catalysts in a variety of ring-closing and ring-opening metathesis polymerization (RCM and ROMP) reactions were thoroughly studied and compared with the previously known chloride precatalyst. Photochemical RCM studies provided similar results, especially in non-hindered reactions, with the UV-A wavelength being the best in all cases. On the other hand, the thermal activation profile exposed that the anionic ligand significantly affects reactivity. Notably, cis-Ru-Phos-I₂ disclosed particularly impressive initiation efficiency compared to the other members of the family. Full article

One of the most effective synthetic pathways to produce unsaturated compounds and polymers, meant for both industrial and pharmaceutical applications, is olefin metathesis. These useful reactions are commonly promoted by ruthenium-based precatalysts, namely the second-generation Grubbs’ catalyst (GII) and complexes bearing a styrenyl ether ligand, referred to as the second-generation Hoveyda–Grubbs’ catalyst (HGII). By altering the steric and electronic characteristics of substituents on the backbone and/or on the nitrogen atoms of the NHC ligand, it is possible to increase the reactivity and stability of second-generation ruthenium catalysts. The synthesis of an HG type II complex bearing two anti-phenyl backbone substituents (anti-HGII_Ph-Mes) with mesityl N-substituents is reported. The catalytic performances of the new complex were investigated in standard ring-closing metathesis (RCM) and ring-opening metathesis polymerization (ROMP) and compared to those of the analogue complex syn-HGII_Ph-Mes and to the classic HGII complex. A thorough analysis of the temperature dependence of the performances, along with a detailed comparison with the commercially available HGII, is conducted. The HGII_Ph-Mes complexes are more thermally stable than their parent HGII, as shown by the fact that their activity in the ROMP of 5-ethylidene-2-norbornene does not alter when the polymerization is carried out at room temperature after the complexes have been held at 180 °C for two hours, making them particularly interesting for materials applications. Full article

An efficient approach to the synthesis of olefin metathesis HG-type catalysts containing an N→Ru bond in a six-membered chelate ring was proposed. For the most part, these ruthenium chelates can be prepared easily and in high yields based on the interaction between 2-vinylbenzylamines and Ind II (the common precursor for Ru-complex synthesis). It was demonstrated that the increase of the steric volume of substituents attached to the nitrogen atom and in the α-position of the benzylidene fragment leads to a dramatic decrease in the stability of the target ruthenium complexes. The bulkiest ⁱPr substituent bonded to the nitrogen atom or to the α-position does not allow the closing of the chelate cycle. N,N-Diethyl-1-(2-vinylphenyl)propan-1-amine is a limiting case; its interaction with Ind II makes it possible to isolate the corresponding ruthenium chelate in a low yield (5%). Catalytic activity of the synthesized complexes was tested in RCM reactions and compared with α-unsubstituted catalysts obtained previously. The structural peculiarities of the final ruthenium complexes were thoroughly investigated using XRD and NMR analysis, which allowed making a reliable correlation between the structure of the complexes and their catalytic properties. Full article

Here, we demonstrate a short synthetic route to pyrano cage systems containing pentacycloundecane units by employing ring-closing metathesis (RCM) as a key step. These cage systems were constructed starting with readily available starting materials by adopting atomic economic processes such as cycloadditions (Diels-Alder reaction and [2+2] cycloaddition), Grignard addition, and olefin metathesis. The key building block, such as hexacyclic cage dione, was prepared from 1,4-naphthoquinone derivative and freshly cracked 1,3-cyclopentadiene. Some of these heterocyclic motifs are useful in biological chemistry and valuable as key synthons for high-energy-density materials. Full article

A tremendous number of solvents, either as liquids or vapors, contaminate the environment on a daily basis worldwide. Olefin metathesis, which has been widely used as high-yielding protocols for ring-opening metathesis polymerization (ROMP), ring-closing metathesis (RCM), and isomerization reactions, is typically performed in toxic and volatile solvents such as dichloromethane. In this study, the results of our systematic experiments with the Grubbs G1, G2, and Hoveyda-Grubbs HG2 catalysts proved that benzotrifluoride (BTF) can replace dichloromethane (DCM) in these reactions, providing high yields and similar or even higher reaction rates in certain cases. The ROMP of norbornene resulted not only in high yields but also in polynorbornenes with a high molecular weight at low catalyst loadings. Ring-closing metathesis (RCM) experiments proved that, with the exception of the G1 catalyst, RCM occurs with similar high efficiencies in BTF as in DCM. It was found that isomerization of (Z)-but-2-ene-1,4-diyl diacetate with the G2 and HG2 catalysts proceeds at significantly higher initial rates in BTF than in DCM, leading to rapid isomerization with high yields in a short time. Overall, BTF is a suitable solvent for olefin metathesis, such as polymer syntheses by ROMP and the ring-closing and isomerization reactions. Full article

New ruthenium olefin metathesis catalysts containing N-heterocyclic carbene (NHC) connected by a linker tether to a benzylidene ligand were studied. Such obtained self-chelated Hoveyda–Grubbs type complexes existed in the form of an organometallic polymer but could still catalyze olefin metathesis after being dissolved in an organic solvent. Although these polymeric catalysts exhibited a slightly lower activity compared to structurally related nonpolymeric catalysts, they were successfully used in a number of ring-closing metathesis reactions leading to a variety of heterocyclic compounds, including biologically and pharmacologically related analogues of cathepsin K inhibitor and sildenafil (Viagra™). In the last case, a good solubility of a polymeric catalyst in toluene allowed the separation of the product from the catalyst via simple filtration. Full article

Two new ruthenium complexes with chelating-ether benzylidene ligands bearing a furan moiety were synthesized and characterized, including X-ray crystallography. They initiated fast, also at 0 °C, and were found to be highly active in a variety of ring-closing, ene-yne, and cross-metathesis reactions, including an active pharmaceutical ingredient (API) model, which makes them good candidates for the transformation of complex polyfunctional compounds that require mild reaction conditions. Full article

EWG-activated and polar quaternary ammonium salt-tagged ruthenium metathesis catalysts have been applied in a two-step one-pot metathesis-oxidation process leading to functionalized α-hydroxyketones (acyloins). In this assisted tandem process, the metathesis catalyst is used first to promote ring-closing metathesis (RCM) and cross-metathesis (CM) steps, then upon the action of Oxone™ converts into an oxidation catalyst able to transform the newly formed olefinic product into acyloin under mild conditions. Full article

Hydrocarbon stapling is a useful tool for stabilizing the secondary structure of peptides. Among several methods, hydrocarbon stapling at i,i + 1 positions was not extensively studied, and their secondary structures are not clarified. In this study, we investigate i,i + 1 hydrocarbon stapling between cis-4-allyloxy-l-proline and various olefin-tethered amino acids. Depending on the ring size of the stapled side chains and structure of the olefin-tethered amino acids, E- or Z-selectivities were observed during the ring-closing metathesis reaction (E/Z was up to 8.5:1 for 17–14-membered rings and up to 1:20 for 13-membered rings). We performed X-ray crystallographic analysis of hydrocarbon stapled peptide at i,i + 1 positions. The X-ray crystallographic structure suggested that the i,i + 1 staple stabilizes the peptide secondary structure to the right-handed α-helix. These findings are especially important for short oligopeptides because the employed stapling method uses two minimal amino acid residues adjacent to each other. Full article

We designed and synthesized helical short oligopeptides with an l-proline on the N-terminus and hydrocarbon stapling on the side chain. Side-chain stapling is a frequently used method for the development of biologically active peptides. Side-chain stapling can stabilize the secondary structures of peptides, and, therefore, stapled peptides may be applicable to peptide-based organocatalysts. Olefin-tethered cis-4-hydroxy-l-proline 1 and l-serine 2 and 8, and (R)-α-allyl-proline 18 were used as cross-linking motifs and incorporated into helical peptide sequences. The Z- and E-selectivities were observed for the ring-closing metathesis reactions of peptides 3 and 11 (i,i+1 series), respectively, while no E/Z-selectivity was observed for that of 19 (i,i+3 series). The stapled peptide B’ catalyzed the Michael addition reaction of 1-methylindole to α,β-unsaturated aldehyde, which was seven times faster than that of unstapled peptide B. Furthermore, the high catalytic activity was retained even at lower catalyst loadings (5 mol %) and lower temperatures (0 °C). The circular dichroism spectra of stapled peptide B’ showed a right-handed helix with a higher intensity than that of unstapled peptide B. These results indicate that the introduction of side-chain stapling is beneficial for enhancing the catalytic activity of short oligopeptide catalysts. Full article

Efforts are described towards the total synthesis of the bacterial macrolide rhizoxin F, which is a potent tubulin assembly and cancer cell growth inhibitor. A significant amount of work was expanded on the construction of the rhizoxin core macrocycle by ring-closing olefin metathesis (RCM) between C(9) and C(10), either directly or by using relay substrates, but in no case was ring-closure achieved. Macrocycle formation was possible by ring-closing alkyne metathesis (RCAM) at the C(9)/C(10) site. The requisite diyne was obtained from advanced intermediates that had been prepared as part of the synthesis of the RCM substrates. While the direct conversion of the triple bond formed in the ring-closing step into the C(9)-C(10) E double bond of the rhizoxin macrocycle proved to be elusive, the corresponding Z isomer was accessible with high selectivity by reductive decomplexation of the biscobalt hexacarbonyl complex of the triple bond with ethylpiperidinium hypophosphite. Radical-induced double bond isomerization, full elaboration of the C(15) side chain, and directed epoxidation of the C(11)-C(12) double bond completed the total synthesis of rhizoxin F. Full article

Deaza-epothilone C, which incorporates a thiophene moiety in place of the thiazole heterocycle in the natural epothilone side chain, has been prepared by semisynthesis from epothilone A, in order to assess the contribution of the thiazole nitrogen to microtubule binding. The synthesis was based on the esterification of a known epothilone A-derived carboxylic acid fragment and a fully synthetic alcohol building block incorporating the modified side chain segment and subsequent ring-closure by ring-closing olefin metathesis. The latter proceeded with unfavorable selectivity and in low yield. Distinct differences in chemical behavior were unveiled between the thiophene-derived advanced intermediates and what has been reported for the corresponding thiazole-based congeners. Compared to natural epothilone C, the free energy of binding of deaza-epothilone C to microtubules was reduced by ca. 1 kcal/mol or less, thus indicating a distinct but non-decisive role of the thiazole nitrogen in the interaction of epothilones with the tubulin/microtubule system. In contrast to natural epothilone C, deaza-epothilone C was devoid of antiproliferative activity in vitro up to a concentration of 10 μM, presumably due to an insufficient stability in the cell culture medium. Full article

A range of water-immiscible commercially available Grubbs-type precatalysts can be used in ring-closing olefin metathesis reaction in high yields. The synthetic transformation is possible in pure water under ambient conditions. Sulfocalixarenes can help to boost the reactivity of the metathesis reaction by catalyst activation, improved mass transfer, and solubility of reactants in the aqueous reaction media. Additionally, the use of supramolecular additives allows lower catalyst loadings, but still high activity in pure water under aerobic conditions. Full article

The reactions between several derivatives of 1-(3,5-dimethoxyphenyl)-prop-2-yn-1-ol and different ruthenium starting materials [i.e., RuCl₂(PPh₃)₃ and RuCl₂(p-cymene)(L), where L is tricyclohexylphosphine di-t-butylmethylphosphine, dicyclohexylphenylphosphine, triisobutylphosphine, triisopropylphosphine, or tri-n-propylphosphine] are described. Several of these reactions allow for the easy, in-situ and atom-economic preparation of olefin metathesis catalysts. Organic precursor 1-(3,5-dimethoxyphenyl)-1-phenyl-prop-2-yn-1-ol led to the formation of active ruthenium indenylidene-ether complexes, while 1-(3,5-dimethoxyphenyl)-prop-2-yn-1-ol and 1-(3,5-dimethoxyphenyl)-1-methyl-prop-2-yn-1-ol did not. It was also found that a bulky and strong σ-donor phosphine ligand was required to impart good catalytic activity to the new ruthenium complexes. Full article