Search Results (83)

Australia has the highest per capita penetration of rooftop solar PV systems in the world. Integration of these systems has led to reverse power flow and associated voltage rise problems in residential low-voltage (LV) distribution networks. Furthermore, random, uncontrolled connection of single-phase solar systems can exacerbate voltage unbalance in these networks. This paper investigates the application of a Static Synchronous Compensator (STATCOM) for the improvement of voltage regulation in four-wire LV distribution feeders through reactive power management as a means of mitigating voltage regulation and unbalance challenges. To demonstrate the performance of the STATCOM with varying loads and PV output, a Q-V droop curve is applied to specify the level of reactive power injection/absorption required to maintain appropriate voltage regulation. A practical four-wire feeder from New South Wales, Australia, has been used as a case study network to analyse improvements in system performance through the use of the STATCOM. The outcomes indicate that the STATCOM has a high degree of efficacy in mitigating voltage regulation and unbalance excursions. In addition, compared to other solutions identified in the existing literature, the STATCOM-based solution requires no sophisticated communication infrastructure. Full article

The rapid growth of electric vehicle (EV) adoption necessitates advanced energy management strategies to ensure sustainable, reliable, and efficient operation of charging infrastructure. This study proposes a hybrid AI-based framework for optimizing residential EV charging systems through the integration of Reinforcement Learning (RL), Linear Programming (LP), and real-time grid-aware scheduling. The system architecture includes smart wall-mounted chargers, a 120 kWp rooftop solar photovoltaic (PV) array, and a 60 kWh lithium-ion battery energy storage system (BESS), simulated under realistic load conditions for 800 residential units and 50 charging points rated at 7.4 kW each. Simulation results, validated through SCADA-based performance monitoring using MATLAB/Simulink and OpenDSS, reveal substantial technical improvements: a 31.5% reduction in peak transformer load, voltage deviation minimized from ±5.8% to ±2.3%, and solar utilization increased from 48% to 66%. The AI framework dynamically predicts user demand using a non-homogeneous Poisson process and optimizes charging schedules based on a cost-voltage-user satisfaction reward function. The study underscores the critical role of intelligent optimization in improving grid reliability, minimizing operational costs, and enhancing renewable energy self-consumption. The proposed system demonstrates scalability, resilience, and cost-effectiveness, offering a practical solution for next-generation urban EV charging networks. Full article

Facing rapid urbanization, rising temperatures, and a residential sector that accounted for 38% of Egypt’s electricity use in 2022, middle-income housing presents a critical yet underexplored opportunity for energy efficiency improvements. This study investigates how the integration of passive design strategies and rooftop photovoltaic (PV) systems can enhance energy performance in this segment, using the Sakan Masr housing project in New Cairo as a case study. Addressing a research gap—namely the limited analysis of combined strategies in Egypt’s middle-income housing—the study follows a four-phase methodology: identifying dominant building orientations; simulating electricity demand and thermal comfort using DesignBuilder; optimizing the building envelope with passive measures; and evaluating PV system performance across south-facing and east–west configurations using PV-SOL. Results reveal that passive strategies such as improved glazing and shading can enhance thermal comfort by up to 10% and reduce cooling loads. Also, east–west PV arrays outperform south-facing ones, producing over 14% more electricity, reducing costs by up to 50%, and avoiding up to 168 tons of CO₂ emissions annually. The findings highlight that passive improvements with smart PV integration—offer a cost-effective pathway toward Net Zero Energy goals, with significant implications for national housing policy and Egypt’s renewable energy transition. Full article

With the rapid development of science and technology, the global demand for renewable energy is increasing. In the urban context, solar energy has become one of the key ways to increase urban energy self-sufficiency and reduce carbon emissions due to its flexibility in installation and ease of expansion of applications. Therefore, based on Geographic Information System (GIS) and deep learning modeling, this paper proposes a method to efficiently assess the potential of urban rooftop solar photovoltaic (PV), which is analyzed in a typical area of Lanzhou New District, which is divided into 8774 units with an area of 87.74 km². The results show that the method has a high accuracy for the identification of the roof area, with a maximum maxF_β of 0.889. The annual solar PV potential of industrial and residential buildings reached 293.602 GWh and 223.198 GWh, respectively, by using the PV panel simulation filling method for the calculation of the area of roofs where the PV panels can be installed. Furthermore, the rooftop PV potential of the industrial buildings in the research area provided can cover 75.17% of the industrial electricity consumption. This approach can provide scientific guidance and data support for regional solar PV planning, which should prioritize the development of solar potential of industrial buildings in the actual consideration of rooftop PV deployment planning. Full article

South Africa’s persistent energy shortages and high utility costs have led to increased interest in rooftop solar photovoltaic (PV) systems. However, understanding their economic and environmental viability in urban residential contexts remains limited. This study investigates the feasibility of integrating rooftop solar PV systems with local energy storage and grid electricity in residential housing complexes in Benoni, Gauteng Province. A hybrid energy system was proposed and modeled using detailed consumption data from a typical community in Benoni. The system includes rooftop PV installations, lithium-ion storage, and connection to the national grid. A techno-economic analysis was conducted over a 25-year project lifespan to evaluate energy cost, payback period, net present cost, and carbon dioxide emissions. The optimal system configuration—Solar PV + Storage + Grid—achieved average annual utility bill savings of USD 30,207, with a payback period of 1.0 year, a net present cost (NPC) of USD 40,782, and an internal rate of return (IRR) of 101.7%. Annual utility costs were reduced from USD 30,472 to USD 267, and the system resulted in a net reduction of 130 metric tons of CO₂ emissions per year. The levelized cost of energy (LCOE) was USD 0.0071/kWh. The integration of rooftop solar PV and energy storage with grid electricity presents a highly cost-effective and environmentally sustainable solution for residential communities in urban South Africa. The findings support policy initiatives aligned with Sustainable Development Goal (SDG) 7: “Affordable and Clean Energy”. Full article

This article attempts to estimate the potential of supplying a residential building in Europe with energy exclusively from RESs during a whole year, including the heating period. The aim of the tests carried out was to minimize the purchase of energy required to achieve the thermal comfort (HVACR + DHW) of a residential building powered solely by electricity. During the tests carried out, the EVs were used by the residents as their daily means of transport, topped up during working hours, and the excess energy remaining in their batteries was discharged into the building when they returned home. Energy for the EVs/PHEVs was sourced from RESs (mostly for free) while they were parked at the workplace, and also on the way home. Two one-month tests in the spring and autumn resulted in a state where, instead of purchasing a significant volume of black energy from the grid, the building was mostly powered by green energy from roof-top PVs and RES energy brought in by the PHEVs/EVs. This study identified days when the building became a real nZEB, which was not possible in previous years. The results of economic gains and carbon footprint reduction were calculated. After a period of testing, the degree of degradation of traction batteries used to carry the energy of EVs/PHEVs was checked. A high potential for such an operation was identified, especially in areas where there are periodic shutdowns (due to a call from the grid operator) of local RESs situated near the residential areas. The proposed solution may be of interest to all countries where the use of grid energy is associated not only with a doubling of costs (grid charges), but also with significant emissions, particularly in the heating period (e.g., Poland). Full article

Despite the abundance of solar resources and significant electrical demand during the daytime, residential PV installations are rarely found in Saudi Arabia due to unfavorable economics, resulting from low electricity tariffs by global standards. This work reports on opportunities and challenges of residential PV installation in Saudi Arabia based on the deployment process and analyses of the performance of two 15 kWp PV systems installed on the rooftops of two similar villas in Jeddah, Saudi Arabia. For each villa, 18 months of electrical consumption and ambient temperature were available pre-installation, followed by 24 months of post-installation PV system monitoring, including incident radiation, generation, and import from the grid. A linear model of the consumption of the villas fitted between 0.016 and 0.019 kWh/m² per cooling degree day, with varying levels of interception. No significant change was observed post-installation of the PV system. On average, the reduction in overall electrical import from the grid was 20–30%. A financial analysis based on the real costs and performance of the installed systems found that the net billing feed-in tariff should be increased to SAR 1.0–1.5 (USD 0.27–0.40), depending on a range of other possible measures, in order to stimulate the growth in residential rooftop PVs. Full article

To address the growing integration of renewable energy sources and storage systems into distribution networks, there is a need for effective tools that can assess the impact of these technologies on grid performance. This paper investigates the impact of integrating residential rooftop photovoltaic (PV) systems and battery energy storage systems (BESSs) into low-voltage (LV) distribution networks. A stochastic approach, using the Monte Carlo method, is applied to randomly place PV systems across the network, generating multiple scenarios for power flow simulations in MATLAB Simulink R2024b. The method incorporates real-world consumer load data and grid topology, representing a novel approach in simulating distribution network behaviour accurately. The novelty of this paper lies in its ability to combine stochastic PV placement with real-world load data, providing a more realistic representation of network conditions. The simulation results revealed that widespread PV deployment can lead to overvoltage issues, but the integration of BESSs alongside PV systems mitigates these problems significantly. The findings of this paper offer valuable insights for Distribution Network Operators, aiding in the development of strategies for optimal PV and BESS integration to enhance grid performance. Full article

The Baltic countries are exploring diverse ways to achieve renewable energy objectives, with a particular emphasis on utilizing photovoltaic (PV) technologies in urban areas. Despite the northerly geographical location, PV energy has proven effective, particularly in individual households under the net metering scheme. Energy communities (EC) in urban areas have the potential to support sustainable energy transition by promoting local generation and increasing resilience. However, the broader adoption of rooftop PV systems faces numerous challenges, including technical limitations and legislative gaps. This study examines challenges encountered by community energy projects in residential apartments through a case study in the Latvian context. The paper provides a comparative analysis of PV community implementation scenarios across the three types of typical apartment buildings. The study demonstrates a number of fundamental obstacles that hamper the development of ECs in apartment buildings. The results indicate that the economic benefits of ECs largely depend on electricity market price, and that selection of optimal community design is the key aspect for minimizing investment risks amid market and legislative uncertainty. Results indicate that individual households may have limited motivation to form ECs under current policies. Finally, the insights provided help shape suggestions for future research. Full article

The integration of photovoltaic (PV) systems in buildings is crucial for reducing reliance on conventional energy sources while promoting sustainability. This study evaluates and compares three energy generation systems: rooftop PV, building-integrated photovoltaics (BIPV), and a hybrid combination of both. The analysis covers energy production, economic feasibility through the levelized cost of electricity (LCOE), and environmental impact by assessing unreleased carbon dioxide (UCD). A residential building in Kerman, Iran, serves as the case study. The results indicate that rooftop PV exhibits the lowest LCOE at USD 0.023/kWh, while BIPV has a higher LCOE of USD 0.077/kWh due to installation complexities. The hybrid system, combining both technologies, achieves a balance with an LCOE of USD 0.05/kWh while maximizing energy generation at 16.2 MWh annually. Additionally, the hybrid system reduces CO₂ emissions by 9.7 tons per year, surpassing the standalone rooftop PV (5.0 tons) and BIPV (4.7 tons). The findings highlight the synergistic benefits of integrating both PV systems, ensuring higher self-sufficiency and enhanced environmental impact. This research underscores the necessity of comprehensive urban energy planning to optimize renewable energy utilization and accelerate the transition toward zero-energy buildings. Full article

The adoption of residential photovoltaic (PV) systems to mitigate the effects of climate change has been incentivized in recent years by government policies. Due to the impacts of these systems on the energy mix and the electrical grid, it is essential to understand how these technologies will expand in urban areas. To fulfill that need, this article presents an innovative method for modeling the diffusion of residential PV systems in urban environments that employs spatial analysis and urban characteristics to identify residences at the subarea level with the potential for installing PV systems, along with temporal analysis to project the adoption growth of these systems over time. This approach integrates urban characteristics such as population density, socioeconomic data, public environmental awareness, rooftop space availability, and population interest in new technologies. Results for the diffusion of PV systems in a Brazilian city are compared with real adoption data. The results are presented in thematic maps showing the spatiotemporal distribution of potential adopters of PV systems. This information is essential for creating efficient decarbonization plans because, while many households can afford these systems, interest in new technologies and knowledge of the benefits of clean energy are also necessary for their adoption. Full article

Rooftop PV-BESS installations often lose profitability despite policy support to accelerate capacity growth. This paper performs techno-economic analysis to assess the effect of heterogeneity in real-world conditions on the economic viability of residential rooftop PV-BESSs. The stochastic nature of generation and consumption is modeled as multiple deterministic scenarios that vary in the capacity rating of the PV system, climatic conditions (insolation and temperature), self-consumption ratio (SCR), generation–demand concurrence, and the presence/absence of capacity and storage subsidies. The results indicate that PV-BESSs are mostly profitable when operating at a capacity factor ≥ 18%. Furthermore, higher daytime electricity consumption enables greater savings with smaller storage capacities, thereby facilitating cost-effective installations at capacity factors ≥ 8%. However, low-yielding PV-BESSs and prosumers exhibiting low generation–demand concurrence require suitable subsidy allocations to become profitable. Full article

In this paper, an optimization-based analysis approach is presented to cost-effectively improve the energy efficiency of residential buildings in Morocco. This study introduces a unique focus on the Moroccan context, where a comprehensive application of energy efficiency optimization has not yet been undertaken. This analysis considers the interactive effects among various energy efficiency measures to determine optimal combinations for designing high-energy performance, as well as net-zero energy, residential buildings for six climate zones in Morocco. In particular, the design analysis approach combines a whole-building simulation with the sequential search technique, providing a novel, integrated cost–benefit analysis that minimizes lifecycle costs (LCC) while maximizing energy savings for each climate zone. This study also includes an unprecedented comparison of optimized designs, reference designs, and current Moroccan building regulations (RTCM), highlighting potential improvements to the existing regulatory framework. While the sequential search method has been applied elsewhere, its specific application to achieve net-zero energy homes in the Moroccan context with comparable LCC is a new contribution. The analysis results show that houses in Morocco can be cost-effectively designed to achieve annual energy savings of 51% for Zone 1, 53% for Zone 2, 60% for Zone 3, 67% for Zone 4, 54% for Zone 5, and 56% for Zone 6 compared to the current construction practices considered as reference designs. Moreover, the results indicate that houses can reach net-zero energy building designs with almost the same LCC as the reference design cases for all the climate zones in Morocco. Full article

As the world increasingly embraces renewable energy as a sustainable power source, accurately assessing of solar energy potential becomes paramount. Photovoltaic (PV) systems, especially those integrated into urban rooftops, offer a promising solution to address the challenges posed by aging energy grids and rising fossil fuel prices. However, optimizing the placement of PV panels on rooftops remains a complex task due to factors like building shape, location, and the surrounding environment. This study introduces the Roof-Solar-Max methodology, which aims to maximize the placement of PV panels on urban rooftops while avoiding shading and panel overlap. Leveraging geographic information systems technology and 3D models, this methodology provides precise estimates of PV generation potential. Key contributions of this research include a roof categorization model, identification of PV-ready rooftops, optimal spatial distribution of PV panels, and innovative evaluation technology. Practical implementation in a real urban setting demonstrates the methodology’s utility for decision making in the planning and development of solar energy systems in urban areas. The main findings highlight substantial potential for PV energy generation in the studied urban area, with capacities reaching up to 444.44 kW. Furthermore, implementing PV systems on residential rooftops has proven to be an effective strategy for reducing CO₂ emissions and addressing climate change, contributing to a cleaner and more sustainable energy mix in urban environments. Full article

In the context of power system decarbonization, the demand-side strategy for increasing the share of renewable energy is studied for two constrained energy systems. This strategy, which is currently widely suggested in policies on the energy transition, would impact consumer behavior. Despite the importance of studying the latter, the focus here is on decisions regarding the type, location, and timeframe of implementing the related measures. As such, solutions must be assessed in terms of cost and feasibility, technological learning, and by considering geographical and environmental constraints. Based on techno-economic optimization, in this paper we analyze the evolution of the power system and elaborate plausible long-term trajectories in the energy systems of two European islands. The case studies, Procida in Italy and Hinnøya in Norway, are both electrically connected to the mainland by submarine cables and present issues in their power systems, which are here understood as relatively isolated power systems. Renewable energy integration is encouraged by legislative measures in Italy. Although not modeled here, they serve as a backbone for the assumptions of increasing these investments. For Procida, rooftop photovoltaics (PV) coupled with energy storage are integrated in the residential, public, and tertiary sectors. A price-based strategy is also applied reflecting the Italian electricity tariff structure. At a certain price difference between peak and off-peak, the electricity supply mix changes, favoring storage technologies and hence decreasing imports by up to 10% during peak times in the year 2050. In Norway, renewable energy resources are abundant. The analysis for Hinnøya showcases possible cross-sectoral flexibilities through electrification, leading to decarbonization. By fine-tuning electric vehicle charging tactics and leveraging Norway’s electricity pricing model, excess electricity demand peaks can be averted. The conclusions of this double-prospective study provide a comparative analysis that presents the lessons learnt and makes replicability recommendations for other territories. Full article