Search Results (72)

Tidal seashell waste represents an abundant, underutilized marine resource that poses environmental disposal challenges but offers potential as a sustainable bio-filler in epoxy composites. This study investigates its incorporation into bio-based epoxy systems to reduce reliance on non-renewable materials and promote circular economy objectives. Processed seashell powder was blended into epoxy formulations, and response surface methodology was applied to optimize filler loading and resin composition. Comprehensive characterization included tensile strength, impact resistance, hardness, density, and thermal conductivity testing, along with microscopy analysis to evaluate filler dispersion and interfacial bonding. The optimized composites demonstrated improved hardness, density, and thermal stability while maintaining acceptable tensile and impact strength. Microscopy confirmed uniform filler distribution at optimal loadings but revealed agglomeration and void formation at higher contents, which can reduce interfacial bonding efficiency. These findings highlight the feasibility of valorizing marine waste as a reinforcing filler in sustainable composite production, supporting environmental goals and offering a scalable approach for the development of durable, lightweight materials suitable for structural, coating, and industrial applications. Full article

The composite materials industry is increasingly seeking sustainable alternatives to mitigate the environmental impact of end-of-life materials. As a result, many sectors are transitioning toward bio-based or partially bio-based matrices (e.g., epoxy resins) to preserve material properties while improving sustainability. The transportation sector, in particular, demands materials that meet stringent mechanical and fire resistance standards. In this study, various epoxy systems with bio-based and/or recyclable content were investigated, along with renewable additives designed to enhance fire resistance through their functional groups and chemical structure. The research focused on developing formulations compatible with Sheet Moulding Compound (SMC) technology, which is widely used in transportation applications. Through extensive testing, materials with high bio-based content were successfully developed, exhibiting competitive mechanical properties and compliance with key fire safety requirements of the railway sector, as per the EN 45545-2 standard. Full article

Lignin, an abundant and renewable biopolymer, has gained significant attention as a sustainable modifier and building block in polymeric materials. Recent advancements highlight its potential to tailor mechanical, thermal, and barrier properties of polymers while offering a greener alternative to petroleum-based additives. This review provides an updated perspective on the incorporation of lignin into various polymer matrices, focusing on lignin modification techniques, structure–property relationships, and emerging applications. Special emphasis is given to recent innovations in lignin functionalization and its role in developing high-performance, biodegradable, and recyclable materials such as polyurethanes, epoxy resins, phenol-formaldehyde resins, lignin-modified composites, and lignin-based films, coatings, elastomers, and adhesives. These lignin-based materials are gaining attention for potential applications in construction, automated industries, packaging, textiles, wastewater treatment, footwear, supporting goods, automobiles, printing rollers, sealants, and binders. Full article

The use of natural fibers in hydro turbine rotors promotes sustainability by offering biodegradable, renewable materials with a lower carbon footprint. This study compares the hydrodynamic performance of two rotors in a gravitational vortex turbine: Rotor 1, 3D-printed with polylactic acid (PLA), and Rotor 2, made from fique fiber and epoxy resin using manual molding. To compare the rotors, experimental tests were conducted on a laboratory-scale setup, where the behavior of both rotors was evaluated under different flow regimes. Rotor 1 achieved 61.01% efficiency at an angular velocity ($\omega$) 160 RPM, while Rotor 2 reached only 19.03% at $\omega$ of 165 RPM. The lower performance of Rotor 2 was due to dynamic imbalances and mechanical vibrations, leading to energy losses. These challenges highlight the limitations of manual molding in achieving precise rotor geometry and balance. To improve natural fiber rotor viability, optimizing manufacturing techniques is crucial to enhance dynamic balance and minimize vibrations. Advancements in fabrication could bridge the performance gap between natural and synthetic materials, making bio-based rotors more competitive. This study emphasizes the potential of natural fibers in sustainable energy and the need to refine production methods to maximize efficiency and reliability. Addressing these challenges will help integrate eco-friendly rotors into hydro turbine technologies. Full article

The increasing demand for the development of environmentally friendly alternatives to petroleum-derived materials has increased research efforts on sustainable polymer composites. This study systematically examined the effect of nano-biochar derived from agricultural wastes such as olive pulp on the mechanical and thermal properties of epoxy-resin-based composites. First, the biochar from olive pulp was produced by pyrolysis at 450 °C and turned to nano-biochar using ball milling. Composite samples containing nano-biochar at different rates between 0 and 10% were prepared. The nano-biochar and composite samples were characterized by using different techniques such as SEM-EDS, BET, FTIR, XRD, Raman, TGA, and DMA analyses. Also, the tensile strength, elastic modulus, Shore D hardness, thermal stability, and static toughness of the composite samples were evaluated. The best performance was observed in the sample containing 6% nano-biochar; the ultimate tensile strength increased from 17.37 MPa to 23.46 MPa compared to pure epoxy, and the elastic modulus and hardness increased. However, a decrease in brittleness and toughness was observed at higher additive rates. FTIR and DMA analyses indicated that the nano-biochar interacted strongly with the epoxy matrix and increased its thermal stability. The results showed that the olive-pulp-derived nano-biochar could be used to improve the structural and thermal properties of the epoxy composites as an inexpensive and environmentally friendly filler. As a result, this study contributes to the production of new polymer-based materials that will encourage the production of environmentally friendly composites with nano-scale biochar obtained from olive waste, which is an easily accessible, renewable by-product. Full article

Bamboo is a green, renewable material with high strength and low cost, but raw bamboo has limited application in residential buildings due to its irregular shape and dry cracking. In this regard, this work proposed a novel ecological sandwich panel to explore the potential combination of engineered bamboo and raw bamboo culms. Face sheets made of glued laminated bamboo panels were bonded to the bamboo culm core via epoxy resin and mortise–tenon joints. Two groups of specimens with height-to-thickness ratios of 4.63 and 5.37 were tested through edgewise compression to investigate the failure modes, strength and rigidity. The results revealed that the specimens had no overall stability problem under axial loading, but exhibited delamination and local bulging to the face sheets. When the height-to-thickness ratio increased from 4.63 to 5.37, but still belonged to the short member range, the area of the adhesive interface increased by 16.13%, and the edgewise compressive strength and rigidity increased by 17.57% and 35.04%, respectively. This indicated that the capacity and rigidity were mainly determined by the connection strength, which was obviously affected by the manufacturing and assembly errors. Accordingly, increasing the connection strength could be helpful for improving the load-carrying capacity and ductility of such panels. Full article

Sustainable bio-based epoxy technology is developed by using bio-based epoxy materials instead of conventional fossil-derived ones. Significant progress in new bio-based epoxy material development on bio-based epoxy resins, curing agents, and additives, as well as bio-based epoxy formulated products, has been achieved recently not only in fundamental academic studies but also in industrial product development. There are mainly two types of bio-based epoxy resins: conventional epoxy resins and novel epoxy resins, depending on the epoxy resin building-block type used. Bio-based conventional epoxy resins are prepared by using the bio-based epichlorohydrin to replace conventional fossil-based epichlorohydrin. Bio-based novel epoxy resins are usually prepared from epoxidation of renewable precursors such as unsaturated vegetable oils, saccharides, tannins, cardanols, terpenes, rosins, and lignin. Typical bio-based curing agents are bio-based polyamines, polyamides, amidoamines, and cardanol-based phenalkamine-type curing agents. Cardanol is a typical bio-based reactive additive available commercially. Certain types of partially bio-based formulated epoxy products have been developed and supplied for use in bonding, coating, casting, composite, and laminating applications. Full article

Polymers are essential in modern life, but their large-scale production from non-renewable sources contributes to raw material depletion and environmental pollution. The shift from a linear to a circular economy aims to address these issues by promoting sustainable practices. Recent research focuses on incorporating natural fillers and biowastes to improve flame retardancy and reduce resource depletion. This work demonstrates the suitability of humic acids, biochar derived from both spent coffee grounds and the hydrothermal liquefaction of sludge, for use as flame-retardant additives in epoxy resins. The results are discussed in relation to the composition and preparation procedure of the composite materials. Particularly, the modification of epoxy chains with a proper coupling agent guarantees the uniform distribution of the waste throughout the polymer matrix. Full article

The introduction of renewable energy sources (RESs) in the electricity grid mix is essential for a greener world. Wind offshore energy, known for its high flexibility and social acceptance, plays a significant role in this transition. However, the disposal of non-recyclable epoxy–GFRP wind blades produced and installed in the 1990s and 2000s poses environmental challenges. This study explores the development of a novel wind blade using sustainable materials, aiming to enhance eco-friendliness. A comparative life cycle assessment (LCA) highlights the environmental benefits of replacing epoxy with a thermoplastic recyclable resin in GFRP blades. The findings demonstrate a substantial reduction in environmental footprint, with a 30% decrease in climate change impact, a 97% reduction in freshwater ecotoxicity and a 95% reduction in marine eutrophication. It is evident from the LCA that the replacement of epoxy with a thermoplastic recyclable resin in a GFRP blade substantially reduces its environmental footprint and significantly contributes to the circular economy of RESs. Full article

Conventional epoxy thermosets, with irreversible crosslinking networks, cannot be reprocessed and recycled. Furthermore, the utilization of petroleum-based materials accelerates the depletion of non-renewable resources. The introduction of dynamic covalent bonds and the use of bio-based materials for thermosets can effectively address the above issues. Herein, a series of bio-based epoxy vitrimers with dynamic covalent imine bonds were synthesized via a simple solvent-free, one-pot method using vanillin-derived aldehyde monomers, 4,4-diaminodiphenylsulfone (DDS) and bisphenol F diglycidyl ether (BFDGE) as raw materials. The effect of crosslinking density, crosslinking structure and imine bond content on the resulting bio-based vitrimers was studied, demonstrating their excellent thermal properties, UV shielding and solvent resistance, as well as outstanding mechanical properties compared to those of the previously reported vitrimers. In particular, the cured neat resin of vitrimer had a maximum tensile strength of 109 MPa and Young’s modulus of 6257 MPa, which are higher than those of previously reported imine-based vitrimers. The dynamic imine bonds endow these vitrimers with good reprocessability upon heating (over 70% recovery) and degradation under acidic conditions, enabling recycling by physical routes and gentle degradation by chemical routes. This study demonstrates a simple and effective process to prepare high-performance bio-based and recycled epoxy thermosets. Full article

In accordance with German guideline ZTV-ING Part 4, full-locked coil ropes are provided with a three-layer corrosion protection coating based on epoxy resin and polyurethane, which must be renewed regularly. An alternative method is to use a coating of high-density polyethylene (HDPE), which is extruded onto the rope. In this article, the mechanical behavior of the thermoplastic material is studied, taking into account various accelerated aging processes, which are derived from the climatic boundary conditions of a real bridge structure and implemented in tests. In addition to the quasi-static material behavior, which is described using the uniaxial tensile test, the cyclic conditioning, relaxation, type of production and oxidation stability are also investigated. Finally, the results obtained are evaluated with regard to the applicability of the material as corrosion protection for full-locked coil ropes. Full article

Within the range of composite laminates for structural applications, sandwich laminates are a special category intended for applications characterized by high flexural stresses. As it is well known from the technical literature, structural sandwich laminates have a simple configuration consisting of two skins of very strong material, to which the flexural strength is delegated, between which an inner layer (core) of light material with sufficient shear strength is interposed. As an example, a sandwich configuration widely used in civil, naval, and mechanical engineering is that obtained with fiberglass skins and a core of various materials, such as polyurethane foam or another lightweight material, depending on the application. Increasingly stringent regulations aimed at protecting the environment by reducing harmful emissions of carbon dioxide and carbon monoxide have directed recent research towards the development of new composites and new sandwiches characterized by low environmental impact. Among the various green composite solutions proposed in the literature, a very promising category is that of high-performance biocomposites, which use bio-based matrices reinforced by fiber reinforcements. This approach can also be used to develop green sandwiches for structural applications, consisting of biocomposite skins and cores made by low-environmental impact or renewable materials. In order to make a contribution to this field, a structural sandwich consisting of high-performance sisal–epoxy biocomposite skins and an innovative renewable core made of balsa wood laminates with appropriate lay-ups has been developed and then properly characterized in this work. Through a systematic theoretical–experimental analysis of three distinct core configurations, the unidirectional natural core, the cross-ply type, and the angle-ply type, it has been shown how the use of natural balsa gives rise to inefficient sandwiches, whereas performance optimization is fully achieved by considering the angle-ply core type [±45/90]. Finally, the subsequent comparison with literature data of similar sandwiches has shown how the optimal configuration proposed can be advantageously used to replace synthetic glass–resin sandwiches widely used in various industrial sectors (mechanical engineering, shipbuilding, etc.) and in civil engineering. Full article

This research addresses a gap in the literature by exploring the combined use of hemp and hemp hurds in composites, presenting a novel approach to bio-composite development. We report on the mechanical properties of epoxy resin composites reinforced with hemp fibers and hemp hurds, selected for their sustainability, biodegradability, and environmental benefits. These natural fibers offer a renewable alternative to synthetic fibers, aligning with the growing demand for eco-friendly materials in various industries. The primary objective was to evaluate how different filler contents and hemp hurd-to-hemp fiber ratios affect the composite’s performance. Composites with 1:1 and 3:1 ratios were prepared at filler concentrations ranging from 1 wt.% to 10 wt.%. Tensile tests revealed that the 3:1 ratio composites exhibited better stiffness and tensile strength, with a notable UTS of 19.8 ± 0.4 MPa at 10 wt.%, which represents a 160% increase over neat epoxy. The 1:1 ratio composites showed significant reductions in mechanical properties at higher filler contents due to filler agglomeration. The study concludes that a 3:1 hemp hurd-to-hemp fiber ratio optimizes mechanical properties, offering a sustainable solution for enhancing composite materials’ performance in industrial applications. Full article

Sandwich panels are widely used in the naval and aerospace industries to withstand the normal tensile, compressive, and shear stresses associated with bending. The faces of sandwich composites are usually made of metals such as aluminum and, in some studies with composites, using a polymeric matrix, but there are no studies in the literature using a castor oil polyurethane matrix. The core of the panel must keep the faces apart and be rigid perpendicular to them. To begin the work, a study was carried out on the influence of alkaline treatment on sisal fibers to increase the fibers’ adhesion to castor oil polyurethane. There are no relevant studies worldwide on the use of this resin and the adhesion of vegetable fibers to this polyurethane. In this work, a study was carried out through a three-point bending test of sandwich panels using faces of composite material with sisal fibers subjected to an alkaline treatment of 10% by weight of sodium hydroxide and an immersion time of 4 h in the dissolution, which was the best chemical treatment obtained initially in a castor oil polyurethane matrix. The honeycomb cores were made by 3D printer and in this study two different printing filament materials, PETG and PLA, and two different core heights were compared. As a result of a traction test, it was observed that sisal fibers with chemical treatment in a castor oil polyurethane matrix can be used in composites, although the stress levels obtained are 50% lower than the stresses obtained in other matrixes such as epoxy resin. The combination of sisal faces in a castor oil polyurethane matrix and honeycomb cores made in a 3D printer showed good properties, which allows the use of renewable, sustainable and less aggressive materials for the environment. In all tests, PETG was 21% to 32% stronger than PLA. Although there was no rupture in the test specimens, the PETG cores deformed 0.5% to 3.6% less than PLA. The composites with PLA were lighter, because the core density was 13.8% lower than the PETG cores. Increasing the height of the honeycomb increased its strength. Full article

Preparation of high-performance thermosetting resins via bio-based resources is important for the development of a sustainable world. In this work, we proposed the introduction of cyanide structure groups into the molecular structure of epoxy resins to give them excellent heat resistance. A eugenol-based epoxy-phthalonitrile (EEPN) resin was synthesized by a two-step process using the bio-based renewable resource of eugenol, and a series of EEPN/Epoxide resin (E51) blend resins with different EEPN contents were prepared. The structure of the EEPN monomer was characterized and confirmed by Fourier transform infrared (FTIR), nuclear magnetic resonance (NMR), and elemental analysis. The thermal stability and dynamic mechanical properties of the cured resins were investigated by thermogravimetric analysis and dynamic mechanical thermal analysis. The experimental results showed that EEPN had excellent heat resistance; the char yield at 800 °C was 67.9 wt%, which was much higher than that of E51 at 26.3 wt%; and the heat resistance of the blended resins was significantly improved with the increase in the EEPN content. Full article