Search Results (2,481)

Cataloging task resource scheduling is a key technology for the efficient utilization of ground-based radar networks and for supporting space situational awareness. This problem is highly challenging due to the large scale of tasks, strict time window constraints, and complex resource-task mapping relationships. It requires algorithms to effectively balance multiple conflicting optimization objectives within a huge and sparse solution space, placing extremely high demands on the convergence, diversity maintenance, and computational efficiency of the algorithms. This paper presents a systematic review of the latest research progress in cataloging resource scheduling methods. First, commonly used optimization objectives and constraint conditions in this field are outlined, and two key subproblems—priority modeling and conflict resolution—are analyzed in depth. Subsequently, following the trajectory of technological evolution, the application paradigms, performance characteristics, and limitations of mainstream algorithms are reviewed. Given the inherent multi-objective optimization nature of the problem, the advantages and challenges of multi-objective optimization algorithms are discussed. Finally, based on a unified problem context, the performance and operational boundaries of existing algorithms are compared and analyzed, and future research directions and core challenges in the field are presented. Full article

Time-series interferometric synthetic aperture radar (TS-InSAR) has become a widely used technique for monitoring surface deformation with high spatial and temporal resolution. The recent rise in cloud-based InSAR platforms has significantly accelerated the production of interferograms. However, the accuracy of deformation inversion remains limited by fundamental issues affecting interferogram quality, including temporal and spatial decorrelation and phase unwrapping errors. These degrading effects are most pronounced in vegetated, desert, and snow-covered terrains, which are common in active tectonic zones and thereby exert a major impact on the quality of the unwrapped phase. Traditional quality control methods are inefficient or inadequate for large-scale analysis, and discarding low-quality data reduces the inversion accuracy. To address these limitations, we developed a deep learning-based approach to automatically assess interferogram quality and integrate it into the time-series InSAR inversion workflow. We utilized Sentinel-1 interferograms generated by the COMET-LiCSAR system as the primary data source. Based on this dataset, we developed a multi-stage selection strategy for interferogram quality control, integrating loop phase closure analysis, statistical indicators (including coherence and phase standard deviation), and manual verification. As a result, we constructed a high-quality labeled dataset comprising approximately 20,000 samples. An improved ConvNeXt-InSAR model was designed and trained to automatically quantify the quality of each pixel in individual interferograms. The model generates pixel-wise quality maps, which are then incorporated as weight constraints in the time-series InSAR network inversion. The proposed method was applied to the interseismic deformation reconstruction in the central-southern Tibetan Plateau region. This study highlights the potential of deep learning-based interferogram quality assessment in facilitating large-scale, automated time-series InSAR processing. Full article

This study proposes a feature-level fusion method that integrates Differential Interferometric Synthetic Aperture Radar (D-InSAR) and Unmanned Aerial Vehicle photogrammetry (UAV-P) for monitoring mining-induced subsidence basin (MSB). The method begins by extracting key subsidence characteristics based on the patterns of coal-mining-related surface displacement; the centimeter-level subsidence boundary is determined from D-InSAR data, while the meter-scale deformation at the subsidence center is derived from UAV-P. These extracted features are then used to invert the parameters of the probability integral method (PIM). The subsidence basin predicted by the inverted parameters serves as a criterion to select the superior dataset between the D-InSAR and UAV-derived results. Finally, the selected subsidence data are fused to generate a composite subsidence map. The proposed method was applied to the 2S201 panel in the Wangjiata Coal Mine using eight Sentinel-1A images and two UAV surveys. The fusion results were evaluated for their regional and overall accuracy against 30 ground control points measured by total station and GPS. The results demonstrate that the fusion method not only accurately extracts large-scale deformations in the mining area, with a maximum subsidence of 2.5 m and a root mean square error (RMSE) of 0.277 m in the subsidence center area, but also precisely identifies the subsidence boundary region with an accuracy of 0.039 m. The fused subsidence basin exhibits an overall accuracy of 0.182 m, which represents a significant improvement of 83.6% and 27.8% over the results obtained using D-InSAR and UAV alone, respectively. This method effectively reconstructs the complete morphology of the mining-induced subsidence basin, confirming its feasibility for practical applications. Full article

This paper presents a comprehensive real-time forecasting and mapping cycle of a regional flood event, encompassing quantitative precipitation forecasting, runoff production and routing, and inundation mapping. The objective of this study is to highlight the significant uncertainties inherent in each step of the fully automated cycle, despite the utilization of state-of-the-art models and remote sensing technologies. The case study focuses on a significant flood event that occurred in the Turkey River and Upper Iowa River, in rural Iowa, United States, resulting in localized damage and disruption to several small communities. The novelty of this study is that it demonstrates the limited utility of satellite-based remote sensing in the absence of other forecasting and mapping system elements, emphasizing the need for the timely integration of information from diverse sources to accurately forecast and map floods. To achieve this, we assembled and analyzed precipitation data from weather radars, streamflow estimates derived from river stages and rating curves, and cross-sectional data from river channels to characterize the movement of the flood wave. These data were integrated into hydrologic and hydraulic models to generate flood inundation estimates for the more severely affected areas. Remote sensing imagery was obtained and used as reference to assess the accuracy of the modeled inundated areas. Our findings illustrate that, despite the increasing availability of satellite data sources, there are still significant limitations to tracking inundation using satellite remote sensing, particularly for medium-sized basins. Flood modeling processes are not merely complementary to satellite-based flood estimation, but essential for comprehensive flood risk assessment. Full article

Optical and synthetic aperture radar (SAR) image registration faces challenges from nonlinear radiometric distortions and geometric deformations caused by different imaging mechanisms. This paper proposes a coarse-to-fine registration algorithm integrating geographic information constraints with cross-modal feature consistency mapping. The coarse stage employs imaging geometry-based coordinate transformation with airborne navigation data to eliminate scale and rotation differences. The fine stage constructs a multi-scale phase congruency-based feature response aggregation model combined with rotation-invariant descriptors and global-to-local search for sub-pixel alignment. Experiments on integrated airborne optical/SAR datasets demonstrate superior performance with an average RMSE of 2.00 pixels, outperforming both traditional handcrafted methods (3MRS, OS-SIFT, POS-GIFT, GLS-MIFT) and state-of-the-art deep learning approaches (SuperGlue, LoFTR, ReDFeat, SAROptNet) while reducing execution time by 37.0% compared with the best-performing baseline. The proposed coarse registration also serves as an effective preprocessing module that improves SuperGlue’s matching rate by 167% and LoFTR’s by 109%, with a hybrid refinement strategy achieving 1.95 pixels RMSE. The method demonstrates robust performance under challenging conditions, enabling real-time UAV-based multi-sensor fusion applications. Full article

Preventive conservation of historic buildings is crucial to avoid extensive damage, yet assessments are often reactive. Following mortar detachment at the Basilica of Santa María del Pi, this paper presents a diagnosis using Non-Destructive Testing (NDT). The study employed Horizontal-to-Vertical Spectral Ratio (HVSR) for subsoil analysis and Ground Penetrating Radar (GPR) for superstructure inspection. HVSR analysis differentiated fill material from compacted ground, revealing that most of the basilica rests on infilled soil, except the northern corner, suggesting differential settlement risks. Concurrently, GPR survey of vaults and roofs identified internal structures, specifically zones lightened with hollow ceramics, and mapped high-moisture anomalies via wave amplitude and velocity analysis. The study concludes that these methods are complementary, addressing distinct spatial domains. Integrating subsoil characterization with superstructure analysis provided a comprehensive diagnosis essential for long-term maintenance and preservation. Full article

Land degradation (LD) is an emerging threat of the decade that is not only deteriorating arable lands globally but also threatening global ecosystem sustainability. Therefore, the intensification of LD has stimulated global governing bodies and researchers to undertake initiatives against this dilemma through sustainable and eco-friendly approaches. Geographical mapping is critical in analysing land formation, soil composition and land use patterns, subsequently facilitating data-driven planning for soil conservation. In this review, Geographic Information System (GIS) technology, combined with Shuttle Radar Topography Mission (SRTM) data, is used to explore soil properties and land use patterns across Saudi Arabia, with a focus on soil types, soil thickness, and soil uses. Spatial analyses indicate that the most predominant soil type in the country is sandy, followed by loam and sandy loam. The soil depth distribution exhibits a notably bimodal pattern, with large areas characterized by shallow soils (0–4 m) and deep soils (43–50 m). These spatial visualizations provide valuable insights into soil heterogeneity, supporting evidence-based, site-specific strategies for sustainable land management. This study also outlines the major land degradation pathways affecting arable lands in Saudi Arabia and describes how these pathways can be used to assess the extent of land loss. Besides land loss pathways, the current study also explains the most suitable mitigation strategies, including mulching, cover cropping, and agroforestry, as well as how international governing bodies like the UNDP, UNEP, FAO, and World Bank can contribute to the mitigation of LD in Saudi Arabia. However, further studies are required to assess the intensity of these solutions for each soil type and thickness under different climatic conditions. Full article

Monitoring small water body coverage spatiotemporal evolution in karst areas of complex hydrogeology is pivotal for water resource management and disaster assessment. With recent infrastructure expansion, intensive tunnel excavation has occurred in Chongqing’s Geleshan, a typical karst region with fragile aquifers. It has disrupted hydrogeological systems, triggering ground subsidence, groundwater leakage, and subsequent reservoir desiccation, as well as threatening regional water security and ecology. Thus, monitoring reservoir coverage evolution is critical to clarify dynamics and driving mechanisms. Synthetic Aperture Radar (SAR) is ideal for water body mapping, enabling data acquisition independent of illumination and weather. However, traditional SAR-based water extraction methods are hampered by low-scatter noise and poor adaptability to hydrological fluctuations. To address this, a two-stage dual-polarization SAR clustering algorithm (TSDPS-Clus) was developed using 452 time-series Sentinel-1 images (7 February 2017–24 August 2025). Specifically, the Kolmogorov–Smirnov test via pixel-wise time-series statistics screened core water areas, built candidate regions, and mitigated noise. Subsequently, dual-polarization and positional features were fused via singular value decomposition (SVD) to generate a high-discrimination low-dimensional feature set, followed by the Iterative Self-Organizing Data Analysis Techniques Algorithm (ISODATA) clustering for high-precision extraction. Results demonstrate that the algorithm suits reservoir storage-desiccation dynamics; dual-polarization complementarity boosts accuracy and clarifies six reservoirs’ spatiotemporal evolution. Notably, post-2023, tunnel excavation-induced land subsidence increased drying frequency and duration, with a 24-month maximum cumulative desiccation period. Full article

Accurate estimation of topsoil moisture (TSM) is essential for optimizing agricultural practices, particularly in the context of precision farming. This study evaluates the use of high-resolution synthetic aperture radar (SAR) imagery from TerraSAR-X (X-band) and Radarsat-2 (C-band) for estimating TSM over bare agricultural soils, at both plot and intra-plot spatial scales. The experiment was conducted over a 420 km² area in southwest France, comprising 29 agricultural plots with varying topography, soil texture, and land management practices. Extensive in situ measurements of TSM, soil texture, and surface roughness were collected over multiple dates. A random forest regression model was developed to estimate soil moisture, using radar backscatter coefficients, incidence angles, soil texture components (clay, silt, sand), and roughness parameters (Hrms, correlation length) as input features. The modeling approach was applied at multiple spatial scales by extracting satellite signals within circular buffers of varying radius (5 to 30 m), as well as at the plot scale. Results indicate that estimation performance improves with increasing buffer size, with the best results achieved at the 30 m intra-plot scale (R² > 0.8, RMSE < 4 m³·m⁻³), outperforming plot-scale estimates. Both C-band and X-band data provided reliable results, with a slight advantage when combining data from multiple incidence angles. The inclusion of surface roughness and soil texture significantly improved model accuracy, underlining the importance of accounting for local soil properties in radar-based moisture retrieval. The intra-plot variability of TSM was found to be substantial, often exceeding inter-plot differences, highlighting the necessity for high spatial resolution in moisture monitoring. This study demonstrates the value of combining ground observations with multi-frequency SAR data and machine learning for high-resolution soil moisture mapping. The approach supports more precise water management strategies and contributes to sustainable agricultural development through informed decision-making. Full article

In communication-centric integrated sensing and communication (ISAC) systems, passive radars exploit existing communication signals of opportunity for sensing. To compute delay-Doppler or range–velocity maps (DDMs and RVMs, respectively), modern orthogonal frequency division multiplexing (OFDM)-based sensing systems use the channel frequency response (CFR) originally estimated in communication receivers for equalization. In OFDM-based passive radars utilizing 4G LTE or 5G NR waveforms, CFR estimation typically relies only on reference signals. However, simulation-based studies that assume a priori knowledge of user data symbols indicate potential performance gains when incorporating user data and other downlink channels. In this work, we present an experimental evaluation of an OFDM-based passive radar that jointly utilizes all commonly present components of the 5G NR downlink waveform: synchronization signals (PSS and SSS), broadcast and control channels (PBCHs and PDCCHs, respectively), data channels (PDSCHs), and reference signals (PBCH DM-RSs, PDCCH DM-RSs, PDSCH DM-RSs, and CSI-RSs). Our results show that utilizing user data from fully occupied 5G downlink signals, under the assumption of full knowledge of PDSCH locations, significantly improves both the probability of detection (POD) and the peak height, measured by the peak-to-noise-floor ratio (PNFR), compared with pilot-only sensing. Since perfect knowledge of the user data payload is not assumed, we estimate the transmission bit error rate (BER) and analyze its impact on sensing performance. Finally, we investigate more realistic scenarios in which only a subset of PDSCH resource element locations is known, as in practical 5G deployments, and evaluate how partial data location knowledge affects the POD and PNFR under different BER conditions. Full article

Road target detection is a crucial aspect of current research in automotive advanced driver assistance systems and intelligent transportation systems, where accuracy, speed, and lightweight design are key considerations. Compared to various sensors employed in driving assistance systems, millimeter-wave radar offers advantages such as all-weather operation, low hardware cost, strong penetration capability, and the ability to extract rich spatial information about targets. This paper tackles the challenges posed by the characteristics of Range-Angle map data from 77 GHz Frequency-Modulated Continuous Wave radar—namely, non-visible light imagery, abstract representation, rich fine details, and overlapping features. To this end, this paper proposes MMPFNet, a lightweight model based on the hypergraph mechanism with attention enhancement, as an extension of YOLOv13. First, an M-DSC3k2 module is proposed based on the hypergraph mechanism to enhance attention toward small targets. Second, a detection head with a double-bottleneck inverted MBConv-block structure is designed to improve the model’s accuracy and generalization capability. Third, a lightweight PPLConv module is customized to transform the backbone network, enhancing the model’s lightweight design while slightly reducing its accuracy. Considering the differences from traditional visible light datasets, the Focus Expansion-IoU loss function is introduced into the model to focus attention on different regression samples. The MMPFNet model achieves significant improvements in detecting common road targets such as pedestrians, bicycles, cars, and trucks on the Frequency-Modulated Continuous Wave radar Range-Angle dataset compared to the baseline YOLOv13n model: mAP50-95 increases by 16%, precision improves by 6%, and recall rises by 8.7%. MMPFNet is also evaluated on other non-visible light datasets such as CRUW-ONRD and soundprint datasets. Compared to commonly used detection models like FCOS and RetinaNet, MMPFNet achieves significant performance gains, attaining state-of-the-art results. Full article

With the widespread deployment of automotive millimeter-wave radars, mutual interference and broadband noise severely degrade the signal-to-noise ratio (SNR) of range–Doppler (RD) maps, leading to the loss of weak targets. Existing deep learning methods rely on difficult-to-obtain paired training samples and often cause excessive target smoothing due to a lack of physical constraints. To address these challenges, this paper proposes RIME-Net, a physics-guided unpaired learning framework designed to jointly achieve radar interference mitigation and weak target enhancement. First, based on a cycle-consistent adversarial architecture, we designed the Interference Mitigation Network (IM-Net). IM-Net integrates spectral consistency loss and identity mapping constraints, learning a robust mapping from the interference domain to the clean domain without paired supervision, effectively suppressing low-rank interference and preserving signal integrity. Second, to recover target details attenuated during denoising, we propose the saliency-aware Target Enhancement Network (TE-Net). TE-Net combines multi-scale residual blocks and channel-spatial attention mechanisms, selectively enhancing weak target features based on saliency priors. Extensive experiments on diverse datasets show that RIME-Net significantly outperforms existing supervised and model-driven methods in terms of SINR, recall, and structural similarity, providing a robust solution for reliable radar perception in complex electromagnetic environments. Full article

The latest advances in remote sensing play a central role in providing Earth observation (EO) data for numerous applications in the scope of reaching environmentally sustainable goals. However, over tropical rainforests, optical imaging is often hindered by extensive cloud coverage, which means that analysis-ready images are mostly restricted to the dry season. In this study, we propose combining radar features extracted from short time series of Sentinel-1 Interferometric Wide Swath (IW) data with a deep learning-based classification scheme to continuously monitor the state of forests. The proposed methodology is based on the joint use of SAR backscatter and interferometric coherences at different temporal baselines to perform pixel-wise classification of land cover classes of interest. However, we show that for a sequence of Sentinel-1 time series, different land cover classes exhibit particular seasonal-dependent variations. Another challenge in performing short-term predictions stems from the fact that ground truths are usually available only on a yearly basis. To address these challenges, we propose a seasonal sampling of the training data, masked by potential deforestation, along with a classification based on a modified U-Net model. The classification results show that overall accuracies above 90% can be achieved throughout the whole year with the proposed method, emerging as a potential tool for mapping rainforests with unprecedented temporal resolution. Full article

This study addresses a critical knowledge gap in quantifying strategic mineral resources within hyper-arid, tectonically complex terrains by establishing a recursive framework that reconciles deterministic resource estimation with the nonlinear dynamics of tectonically mediated metamorphic systems. Using Libya’s Wadi El Shati as a case study, legacy lithological misclassifications are rectified through the fusion of Sentinel-1 Synthetic Aperture Radar, Sentinel-2 multispectral imagery, and Digital Elevation Model analytics within a unified geospatial workflow. The methodology synergizes atmospherically corrected optical data, processed via supervised Maximum Likelihood Classification, with calibrated radar-derived structural lineaments. Classified marble-bearing zones within the Al Mahruqah Formation are integrated with DEM data and field-validated thickness measurements using Triangulated Irregular Network models to resolve surface–subsurface dependencies and compute volumes. The results demonstrate a 91% lithological classification accuracy, rectifying a 22% error in legacy maps. Structural analysis of 1213 lineaments confirms a dominant NE–SW extensional regime (σ₃) that facilitated fluid conduits. The quantified marble-bearing horizon spans ~334 km² with a volume of 6.0 km³ (±9%). Spatial analysis reveals a causal link between high-grade marble clusters, basaltic intrusions, and NE–SW fault systems, refining models of contact metamorphism in rift-related settings. Full article

Target decomposition is an essential method for the interpretation of polarimetric Synthetic Aperture Radar (SAR). Most current polarimetric target decomposition methods are designed for quad-pol SAR data, while there is a scarcity of methods tailored for dual-pol SAR data, and these methods often struggle to accurately capture the complete scattering components of targets. Compared to quad-pol SAR, space-borne SAR systems more frequently acquire dual-pol SAR data, which offers a wider observation swath and higher resolution. The fast generalized polarimetric target decomposition (FGPTD) method has exhibited excellent target decomposition performance for quad-pol SAR data by searching for the optimal scattering models through nonlinear optimization. To address the core problem of inaccurate scattering component extraction in dual-pol SAR, deep learning is adopted to simulate the nonlinear optimization process of the FGPTD method. Its powerful nonlinear mapping capability enables the model to learn the intrinsic correlation between dual-pol SAR data and the complete scattering components obtained by FGPTD. Therefore, this paper proposes a model and learning-aided target decomposition method for dual-pol SAR. Firstly, FGPTD is performed on existing quad-pol SAR data. Subsequently, a mapping set between dual-pol SAR data and scattering components is constructed. Then, a neural network that integrates residual connections and dilated convolutional kernels is trained using the constructed mapping set. Finally, the well-trained neural network is tested on dual-pol SAR data from other regions and other sensors. Experimental results demonstrate that the proposed method’s target decomposition results are close to those of quad-pol target decomposition and superior to current state-of-the-art dual-pol target decomposition methods. Full article