Search Results (11,862)

This study evaluated the effects of dietary hydroxytyrosol (HT) addition on piglets during the nursery phase across two experiments. In the first, 72 weaned male piglets (~26 days old, 7.3 ± 0.5 kg) were assigned to one of four diets containing 0, 5, 10, or 50 mg HT/kg feed. Growth performance, serum biochemistry, histological and behavioral parameters, and meat lipid profiles were assessed. In the second study, the apparent digestibility of diets containing 0, 25, or 50 mg HT/kg feed was evaluated using 15 male piglets (21.5 ± 1.5 kg) through total excreta collection. Results revealed that HT influenced serum glucose and gamma-glutamyl transferase, histological inflammation, and active behaviors. HT modified lipid profiles, reduced capric, lauric, linolenic, arachidonic, cis-5,8,11,14,17-eicosapentaenoic fatty acid concentrations, and increased the nervonic acid profile. The digestibility of dry matter, organic matter, energy, and protein increased with HT use up to 50 mg/kg of feed. These findings demonstrate that HT positively impacts piglet efficiency, changing the fatty acid profile with increased nervonic acid, highlighting its potential as a dietary additive for improving nursery pig production. Full article

The production of bionanocomposite films based on carboxymethyl derivatives of starch and cellulose with sodium montmorillonite (MMT-Na) as a filler was described. The developed films with high absorbency can be used in the preparation of adhesive dressings for wounds oozing as a result of abrasions or tattoos. Carboxymethyl cellulose (CMC), carboxymethyl starch (CMS), and potato starch were used as the raw materials for film manufacturing. Citric acid was used as a crosslinking agent and glycerol as a plasticizer. The following parameters were evaluated for the obtained films: solubility in water, swelling behavior, moisture absorption, and mechanical durability (tensile strength, elongation at break, and Young’s modulus). This study revealed that filler concentration has a significant influence on the stability, durability, and moisture absorption parameters of films. The best nanocomposite with a high absorption capacity was a two-component film CMS/CMC containing 5 pph of sodium montmorillonite and can be used as a base material for wound dressing, among other applications. Full article

Steel is an important product in many engineering sectors; however, steelmaking remains one of the largest ${\mathrm{CO}}_2$ emitters. Therefore, new governmental policies drive the steelmaking industry toward a cleaner and more sustainable operation such as the gas-based direct reduction–electric arc furnace process. To become carbon neutral, utilizing more scrap is one of the feasible solutions to achieve this goal. Addressing knowledge gaps regarding scrap heterogeneity (size, shape, and composition) is essential to evaluate the effects of increased scrap ratios in basic oxygen furnace (BOF) operations. This review systematically examines heat and mass transfer correlations relevant to scrap melting in BOF steelmaking, with a focus on low Prandtl number fluids (thick thermal boundary layer) and dense particulate systems. Notably, a majority of these correlations are designed for fluids with high Prandtl numbers. Even for the ones tailored for low Prandtl, they lack the introduction of the porosity effect which alters the melting behavior in such high temperature systems. The review is divided into two parts. First, it surveys heat transfer correlations for single elements (rods, spheres, and prisms) under natural and forced convection, emphasizing their role in predicting melting rates and estimating maximum shell size. Second, it introduces three numerical modeling approaches, highlighting that the computational fluid dynamics–discrete element method (CFD–DEM) offers flexibility in modeling diverse scrap geometries and contact interactions while being computationally less demanding than particle-resolved direct numerical simulation (PR-DNS). Nevertheless, the review identifies a critical gap: no current CFD–DEM framework simultaneously captures shell formation (particle growth) and non-isotropic scrap melting (particle shrinkage), underscoring the need for improved multiphase models to enhance BOF operation. Full article

Root-knot nematode (Meloidogyne incognita) is a globally destructive plant-parasitic nematode that severely impedes the sustainable production of horticultural crops. Metabolic reprogramming in plant roots represents the host response to M. incognita infection that can also be exploited by the nematode to facilitate its parasitism. In this study, untargeted metabolomics was employed to analyze metabolic changes in cucumber roots following nematode inoculation, with the goal of identifying differentially accumulated metabolites that may influence M. incognita behavior. Metabolomic analysis revealed that M. incognita significantly altered the cucumber root metabolome, triggering an accumulation of lipids and organic acids and enriching biotic stress-related pathways such as alkaloid biosynthesis and linoleic acid metabolism. Among differentially accumulated metabolites, myristic acid and hexadecanal were selected for further study due to their potential roles in nematode inhibition. In vitro assays demonstrated that both metabolites suppressed egg hatching and reduced infectivity of M. incognita, while pot experiments indicated a correlation between their application and reduced root gall formation. Chemotaxis assays further revealed that both metabolites exerted repellent effects on the chemotactic migration of M. incognita J2 and suppressed the transcriptional expression of two motility-and feeding-related neuropeptides, Mi-flp-1 and Mi-flp-18. In conclusion, this study demonstrates the significant potential of differentially accumulated metabolites induced by M. incognita infection for nematode disease control, achieved by interfering with nematode chemotaxis and subsequent infection. This work also provides deeper insights into the metabolomic mechanisms underlying the cucumber-M. incognita interaction. Full article

Green manufacturing has emerged as a critical objective in the evolution of advanced production systems. Although digital twin technology is widely recognized for enhancing efficiency and promoting sustainability, the majority of existing research focuses exclusively on physical systems. They neglect the impact of soft systems, including human behavior, decision-making, and operational strategies. To address this limitation, the present study introduces an innovative hybrid digital twin model that integrates both physical and soft systems to support green manufacturing initiatives comprehensively. The primary contributions of this work are threefold. First, a novel hybrid architecture is developed by coupling real-time physical data with virtual soft system components that simulate factory operations. Second, lean production principles are systematically incorporated into the soft system, thereby facilitating reduced energy consumption and minimizing environmental impact. Third, a parameter-driven programming model is formulated to correlate critical variables with green performance metrics, and a genetic algorithm is utilized to optimize these variables, ultimately enhancing sustainability outcomes. This integrated approach not only expands the applicability of digital twin technology but also offers a data-driven decision-support tool for the advancement of green manufacturing practices. Full article

This study presents the development of Cu-doped NiMo/TiO₂ photoelectrocatalysts for simultaneous green hydrogen production and pharmaceutical pollutant removal under simulated solar irradiation. The catalysts were synthesized via wet impregnation (15 wt.% total metal loading with 0.6 wt.% Cu) and thermally treated at 400 °C and 900 °C to investigate structural transformations and catalytic performance. Comprehensive characterization (XRD, BET, SEM, XPS) revealed phase transitions, enhanced crystallinity, and redistribution of redox states upon Cu incorporation, particularly the formation of NiTiO₃ and an increase in oxygen vacancies. Crystallite sizes for anatase, rutile, and brookite ranged from 21 to 47 nm at NiMoCu400, while NiMoCu900 exhibited only the rutile phase with 55 nm crystallites. BET analysis showed a surface area of 44.4 m²·g⁻¹ for NiMoCu400, and electrochemical measurements confirmed its higher electrochemically active surface area (ECSA, 2.4 cm²), indicating enhanced surface accessibility. In contrast, NiMoCu900 exhibited a much lower BET surface area (1.4 m²·g⁻¹) and ECSA (1.4 cm²), consistent with its inferior photoelectrocatalytic performance. Compared to previously reported binary NiMo/TiO₂ systems, the ternary NiMoCu/TiO₂ catalysts demonstrated significantly improved hydrogen production activity and more efficient photoelectrochemical degradation of paracetamol. Specifically, NiMoCu400 showed an anodic peak current of 0.24 mA·cm⁻² for paracetamol oxidation, representing a 60% increase over NiMo400 and a cathodic current of –0.46 mA·cm⁻² at –0.1 V vs. RHE under illumination, nearly six times higher than the undoped counterpart (–0.08 mA·cm⁻²). Mott–Schottky analysis further revealed that NiMoCu400 retained n-type behavior, while NiMoCu900 exhibited an unusual inversion to p-type, likely due to Cu migration and rutile-phase-induced realignment of donor states. Despite its higher photosensitivity, NiMoCu900 showed negligible photocurrent, confirming that structural preservation and surface redox activity are critical for photoelectrochemical performance. This work provides mechanistic insight into Cu-mediated photoelectrocatalysis and identifies NiMoCu/TiO₂ as a promising bifunctional platform for integrated solar-driven water treatment and sustainable hydrogen production. Full article

E-commerce growth has reshaped consumer behavior and retail services, driving parcel demand and challenging last-mile logistics. Existing research predominantly relies on survey data and global regression models that overlook intra-urban spatial heterogeneity in shopping behaviors. This study bridges this gap by analyzing e-commerce demand’s spatial distribution from a retail service perspective, identifying key drivers, and evaluating implications for omnichannel strategies and logistics. Utilizing waybill big data, spatial analysis, and multiscale geographically weighted regression, we reveal: (1) High-density e-commerce demand areas are predominantly located in central districts, whereas peripheral regions exhibit statistically lower volumes. The spatial distribution pattern of e-commerce demand aligns with the urban development spatial structure. (2) Factors such as population density and education levels significantly influence e-commerce demand. (3) Convenience stores play a dual role as retail service providers and parcel collection points, reinforcing their importance in shaping consumer accessibility and service efficiency, particularly in underserved urban areas. (4) Supermarkets exert a substitution effect on online shopping by offering immediate product availability, highlighting their role in shaping consumer purchasing preferences and retail service strategies. These findings contribute to retail and consumer services research by demonstrating how spatial e-commerce demand patterns reflect consumer shopping preferences, the role of omnichannel retail strategies, and the competitive dynamics between e-commerce and physical retail formats. Full article

Thermal wick-debinding, commonly used in low-pressure injection molding, remains challenging due to complex interactions between binder transport, capillary forces, and thermal effects. This study presents a numerical simulation of binder removal kinetics by coupling Darcy’s law with the Phase Transport in Porous Media interface in COMSOL Multiphysics. The model was validated and subsequently used to study the influence of key debinding parameters. Contrary to the Level Set method, which predicts isolated binder clusters, the Multiphase Flow in Porous Media method proposed in this work more accurately reflects the physical behavior of the process, capturing a continuous binder extraction throughout the green part and a uniform binder distribution within the wicking medium. The model successfully predicted the experimentally observed decrease in binder saturation with increasing debinding temperature or time, with deviation limited 3–10 vol. % (attributed to a mandatory brushing operation, which may underestimate the residual binder mass). The model was then used to optimize the debinding process: for a temperature of 100 °C and an inter-part gap distance of 5 mm, the debinding time was minimized to 7 h. These findings highlight the model’s practical utility for process design, offering a valuable tool for determining optimal debinding parameters and improving productivity. Full article

Background: Environmental enrichment is a promising strategy to improve the welfare of dairy goats and sheep. However, studies in this field remain scattered, and its effects on productivity are unclear. Objectives: To evaluate the effects of environmental enrichment on behavioral, physiological, and productive parameters in dairy goats and sheep. Data sources: Scopus and Web of Science were searched for studies published from 2010 to 2025. Study eligibility criteria: Experimental or observational peer-reviewed studies comparing enriched vs. non-enriched housing in dairy goats or sheep, reporting on welfare or productivity outcomes. Methods: This review followed PRISMA 2020 guidelines and the PICO framework. Two independent reviewers screened and extracted data. Risk of bias was assessed with the SYRCLE tool. Results: Thirteen studies were included, mostly with goats. Physical, sensory, and social enrichments showed benefits for behavior (e.g., activity, fewer stereotypies) and stress physiology. However, results varied by social rank, enrichment type, and physiological stage. Only three studies assessed productive parameters (weight gain in kids/lambs); none evaluated milk yield or quality. Limitations: Most studies had small samples and short durations. No meta-analysis was conducted due to heterogeneity. Conclusions: Environmental enrichment can benefit the welfare of dairy goats and sheep. However, evidence on productivity is scarce. Long-term studies are needed to evaluate its cost-effectiveness and potential impacts on milk yield and reproductive performance. Full article

Rising volumes of textile waste necessitate the development of more efficient recycling systems, with a primary focus on the optimization of sorting technologies. Near-infrared (NIR) spectroscopy is a state-of-the-art method for fiber identification; however, its accuracy in quantifying textile blends, particularly common polyester/cotton blend textiles, still requires refinement. This study explores the potential and limitations of NIR spectroscopy for quantifying cotton content in post-consumer textiles. A lab-scale NIR sorter and a handheld NIR spectrometer in complementary wavelength ranges were applied to a diverse range of post-consumer textile samples to test model accuracies. Results show that the commonly assumed 10% accuracy threshold in industrial sorting can be exceeded, especially when excluding textiles with <35% cotton content. Identifying and excluding the range of non-linearity significantly improved the model’s performance. The final models achieved an RMSEP of 6.6% and bias of −0.9% for the NIR sorter and an RMSEP of 3.1% and bias of −0.6% for the handheld NIR spectrometer. This study also assessed how textile characteristics—such as color, structure, product type, and alkaline treatment—affect spectral behavior and model accuracy, highlighting their importance for refining quantification when high-purity inputs are needed. By identifying current limitations and potential sources of errors, this study provides a foundation for improving NIR-based models. Full article

Background/Objectives: Acrylamide is a probably carcinogenic to humans that naturally forms during the thermal processing of foods. An individual’s lifestyle—especially dietary habits and physical activity—may influence the severity of acrylamide’s adverse health effects. This study aimed to examine the relationship between adolescents’ dietary and exercise behaviors and their dietary acrylamide exposure and associated health risks. Methods: This descriptive and cross-sectional study was conducted with 370 high school students in Türkiye. Data were collected using the Nutrition Exercise Behavior Scale (NEBS) and a retrospective 24-h dietary recall questionnaire. Acrylamide exposure was calculated based on food intake to estimate carcinogenic (CR) and non-corcinogenic (target hazard quotient: THQ) health risks and analyzed in relation to NEBS scores. Results: Findings indicated that while adolescents are beginning to adopt healthy eating and exercise habits, these behaviors are not yet consistent. Emotional eating and unhealthy food choices still occur. Higher acrylamide exposure and risk values were observed in boys and underweight individuals. This can be explained mainly by the fact that boys consume more of certain foods—especially bread, which contains relatively higher levels of acrylamide—than girls do, and that underweight individuals have lower body weights despite consuming similar amounts of food as other groups. Bread products emerged as the primary source of daily acrylamide intake. Positive correlations were found between NEBS total and subscale scores and acrylamide exposure and health risk values. Conclusions: The study demonstrates a significant association between adolescents’ health behaviors and acrylamide exposure. These results underscore potential public health concerns regarding acrylamide intake during adolescence and emphasize the need for targeted nutritional interventions to reduce risk and promote sustainable healthy behaviors. Full article

Water is essential for ecological balance, environmental sustainability, and food security, particularly in arid regions where effective water management increasingly depends on farmer cooperation. The Samarkand region of Uzbekistan, known for its favorable climate and leading role in grape production, is facing rising drought conditions. This study explores the factors influencing grape farmers’ willingness to collaborate on water management in the districts of Ishtikhan, Payarik, and Kushrabot, which together produce 75–80% of the region’s grapes. A quantitative survey of 384 grape-producing households was conducted across 19 county citizens’ gatherings (38.7% of such gatherings), and structural equation modeling was employed to analyze a framework consisting of four dimensions: norms, environmental concerns, economic barriers, and the intention to adopt sustainable practices. The results indicate that norms and environmental concerns positively influence collaboration, suggesting a collective orientation toward sustainability. In contrast, economic barriers such as high costs and limited financial capacity significantly hinder cooperative behavior. Furthermore, a strong individual intention to adopt sustainable practices was associated with a greater likelihood of collaboration. These findings highlight the critical drivers and constraints shaping collective water use in agriculture and suggest that targeted policy measures and community-led efforts are vital for promoting sustainable water governance in drought-prone regions. Full article

The present study focuses on the attractiveness and perceived value of differentiated quality labels, such as the Protected Designation of Origin (PDO) and Protected Geographical Indication (PGI), for agri-food products from Extremadura (Spain). In doing so, it addresses a gap in the scientific literature concerning consumer behavior toward products bearing these certifications. The results show that awareness of these quality schemes is significantly higher among middle-aged and older individuals, underscoring the need for more modern and targeted communication strategies. The findings highlight the strategic role of agri-food marketing in promoting certified products and emphasize the importance of bridging the generational gap in consumer education. Overall, differentiated quality schemes are perceived as strategic tools to enhance the competitiveness of local products, strengthen cultural identity, and foster sustainable rural economies. Furthermore, this study identifies a negative relationship between the consumption of certified products and the awareness of certification and a positive relationship with the willingness to pay a premium. Consumers with greater awareness tend consume these products less, although they are more willing to pay higher prices for items bearing quality labels. Full article

Control charts (CCs) are one of the most important techniques in statistical process control (SPC) used to monitor the behavior of critical variables. SPC is based on the averages of the samples taken. In this way, not every measurement is observed, and errors in measurements or out-of-control behaviors that are not shown graphically can be hidden. This research proposes a novel segmented control chart (SCC) that considers each measurement of the samples, expressed in matrix form. The vision system technique is used to segment measurements by shading and segmenting into binary values based on the control limits of SPC. Once the matrix is segmented, the seven main features of the matrix are extracted using the translation-, scale-, and rotation-invariant Hu moments of the segmented matrices. Finally, a grouping is made to classify the samples in clear and simple language as excellent, good, or regular using the k-means algorithm. The results visually display the total pattern behavior of the samples and their interpretation when they are classified intelligently. The proposal can be replicated in any production sector and strengthen the control of the sampling process. Full article

Ceramic pastes used in additive manufacturing offer several advantages, including low production costs due to the availability of raw materials and efficient processing methods, as well as a reduced environmental footprint through minimized material waste, optimized resource use, and the inclusion of recyclable or sustainably sourced components. This study evaluates the effect of diatomite content in a ceramic paste composed of carboxymethyl cellulose, kaolinite, and feldspar on its extrusion behavior and thermal conductivity, with additional analysis of its implications for microstructure, mechanical properties, and thermal performance. Four ceramic pastes were prepared with diatomite additions of 0, 10, 30, and 60% by weight. Thermal conductivity, extrusion behavior, morphology, and distribution were examined using scanning electron microscopy (SEM), while thermal degradation was assessed through thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC). The results show that increasing diatomite content leads to a reduction in thermal conductivity, which ranged from 0.719 W/(m·°C) for the control sample to 0.515 W/(m·°C) for the 60% diatomite sample, as well as an improvement in extrusion behavior. The ceramic paste demonstrated adequate extrusion performance for 3D printing at diatomite contents above 30%. These findings lay the groundwork for future research and optimization in the development of functional ceramic pastes for advanced manufacturing applications. Full article