Search Results (19)

Rosacea is a chronic inflammatory skin disease characterized by erythematous, papular, and pustular lesions. Treatment for rosacea is tailored to the type and severity of lesions and the individual needs of the patient. The primary therapy involves topical and systemic treatments. Laser therapy is also an effective method. This review summarizes current knowledge on the application of pulsed dye lasers (PDLs), potassium titanyl phosphate (KTP) lasers, intense pulsed light (IPL), neodymium-doped yttrium aluminum garnet (Nd:YAG) lasers, carbon dioxide (CO₂) lasers, and erbium-doped yttrium aluminum garnet (Er:YAG) lasers in the treatment of rosacea. Research confirms that the PDL remains the gold standard, demonstrating excellent clinical efficacy. The KTP and IPL lasers provide comparable outcomes, with relatively fewer adverse effects. Due to its greater depth of penetration, the Nd:YAG laser is used to treat lesions in the deeper layers of the skin. In advanced forms of rosacea, such as rhinophyma, ablative lasers, including CO₂ and Er:YAG, are employed. This review summarizes the mechanisms of action, therapeutic applications, and adverse effects associated with the use of various laser types in the management of rosacea. Full article

Batteries based on heavier alkali ions are considered promising candidates to substitute for current Li-based technologies. In this theoretical study, we characterize the structural properties of a novel material, i.e., F-doped RbTiOPO${}_4$ (RbTiPO${}_4$F, RTP:F), and discuss aspects of its electrochemical performance in Rb-ion batteries (RIBs) using density functional theory (DFT). According to our calculations, RTP:F is expected to retain the so-called KTiOPO${}_4$ (KTP)-type structure, with lattice parameters of $13.236$ Å, $6.616$ Å, and $10.945$ Å. Due to the doping with F, the crystal features eight extra electrons per unit cell, whereby each of these electrons is trapped by one of the surrounding Ti atoms in the cell. Notably, the ground state of the system corresponds to a ferromagnetic spin configuration (i.e., $S=4$). The deintercalation of Rb leads to the oxidation of the Ti atoms in the cell (i.e., from Ti${}^{3+}$ to Ti${}^{4+}$) and to reduced magnetic moments. The material promises interesting electrochemical properties for the cathode: rather high average voltages above $2.8$ V and modest volume shrinkages below 13% even in the fully deintercalated case are predicted. Full article

The crystal family of potassium titanyl phosphate (KTiOPO${}_4$) is a promising material group for applications in quantum and nonlinear optics. The fabrication of low-loss optical waveguides, as well as high-grade periodically poled ferroelectric domain structures, requires a profound understanding of the material properties and crystal structure. In this regard, Raman spectroscopy offers the possibility to study and visualize domain structures, strain, defects, and the local stoichiometry, which are all factors impacting device performance. However, the accurate interpretation of Raman spectra and their changes with respect to extrinsic and intrinsic defects requires a thorough assignment of the Raman modes to their respective crystal features, which to date is only partly conducted based on phenomenological modelling. To address this issue, we calculated the phonon spectra of potassium titanyl phosphate and the related compounds rubidium titanyl phosphate (RbTiOPO${}_4$) and potassium titanyl arsenate (KTiOAsO${}_4$) based on density functional theory and compared them with experimental data. Overall, this allows us to assign various spectral features to eigenmodes of lattice substructures with improved detail compared to previous assignments. Nevertheless, the analysis also shows that not all features of the spectra can unambigiously be explained yet. A possible explanation might be that defects or long range fields not included in the modeling play a crucial rule for the resulting Raman spectrum. In conclusion, this work provides an improved foundation into the vibrational properties in the KTiOPO${}_4$ material family. Full article

The aim of the study is to review the literature to observe studies that evaluate the extent of the thermal effect of different laser wavelengths on the histological evaluation of oral soft tissue biopsies. An electronic search for published studies was performed on the PubMed and Scopus databases between July 2020 and November 2022. After the selection process, all the included studies were subjected to quality assessment and data extraction processes. A total of 28 studies met the eligibility criteria. The most studied laser was the carbon dioxide (CO₂) laser, followed by the diode laser 940 nm–980 nm. Six studies were focused on each of the Erbium-doped Yttrium Aluminium Garnet (Er:YAG), Neodymium-doped Yttrium Aluminum Garnet (Nd:YAG) lasers, and diode lasers of 808 nm and 445 nm. Three studies were for the Potassium Titanyl Phosphate (KTP) laser, and four studies were for the Erbium, Chromium-doped Yttrium, Scandium, Gallium, and Garnet (Er,Cr:YSGG) laser. The quality and bias assessment revealed that almost all the animal studies were at a low risk of bias (RoB) in the considered domains of the used assessment tool except the allocation concealment domain in the selection bias and the blinding domain in the performance bias, where these domains were awarded an unclear or high score in almost all the included animal studies. For clinical studies, the range of the total RoB score in the comparative studies was 14 to 23, while in the non-comparative studies, it was 11 to 15. Almost all the studies concluded that the thermal effect of different laser wavelengths did not hinder the histological diagnosis. This literature review showed some observations. The thermal effect occurred with different wavelengths and parameters and what should be done is to minimize it by better adjusting the laser parameters. The extension of margins during the collection of laser oral biopsies and the use of laser only in non-suspicious lesions are recommended because of the difficulty of the histopathologist to assess the extension and grade of dysplasia at the surgical margins. The comparison of the thermal effect between different studies was impossible due to the presence of methodological heterogeneity. Full article

The surface acoustic wave (SAW) properties of potassium titanyl phosphate (KTiOPO₄, KTP) single crystal were evaluated by numerical methods. The phase velocity, electromechanical coupling coefficient, power flow deflection angle, and temperature coefficient of delay (TCD) were determined for different crystal cuts of KTP. It was shown that SAW has the electromechanical coupling coefficient of 0.59% and the TCD of 62 ppm/°C on the Z-cut and wave propagation direction along the crystal X + 70°-axis. For the Z-cut and wave propagation direction along the X-axis, the pseudo-surface wave (PSAW) is characterized by the coupling coefficient of 0.46% and the TCD value of 57 ppm/°C. The Bleustein–Gulyaev (BG) wave has the TCD value of 35 ppm/°C and 41 ppm/°C on the Y- and X-cuts of KTP, respectively. Full article

We study the DC conductivity in potassium titanyl phosphate (KTiOPO₄, KTP) and its isomorphs KTiOAsO₄ (KTA) and Rb_1%K_99%TiOPO₄ (RKTP) and introduce a method by which to reduce the overall ionic conductivity in KTP by a potassium nitrate treatment. Furthermore, we create so-called gray tracking in KTP and investigate the ionic conductivity in theses areas. A local unintended reduction of the ionic conductivity is observed in the gray-tracked regions, which also induce additional optical absorption in the material. We show that a thermal treatment in an oxygen-rich atmosphere removes the gray tracking and brings the ionic conductivity as well as the optical transmission back to the original level. These studies can help to choose the best material and treatment for specific applications. Full article

Potassium titanyl phosphate (KTP) is a nonlinear optical material with applications in high-power frequency conversion or quasi-phase matching in submicron period domain grids. A prerequisite for these applications is a precise control and understanding of the poling mechanisms to enable the fabrication of high-grade domain grids. In contrast to the widely used material lithium niobate, the domain growth in KTP is less studied, because many standard methods, such as selective etching or polarization microscopy, provides less insight or are not applicable on non-polar surfaces, respectively. In this work, we present results of confocal Raman-spectroscopy of the ferroelectric domain structure in KTP. This analytical method allows for the visualization of domain grids of the non-polar KTP y-face and therefore more insight into the domain-growth and -structure in KTP, which can be used for improved domain fabrication. Full article

This paper presents the results of an experimental study of the optical properties of highly resistive monocrystals of potassium titanyl phosphate (KTiOPO4, KTP) in the frequency range of 0.2–1 THz and the temperature range of (−192)–150 °C. The dispersion of the refractive indices is approximated in the form of Sellmeier equations. The results show that the temperature dependence of the Sellmeier coefficients for all three principal optical axes is close to linear and, most likely, does not experience an extremum in the vicinity of the activation temperatures of the cationic conductivity of the KTP crystal at (−73)–(−23) °C. Weak frequency dependence of an optical axis direction angle V_Z in the range of 0.2–1 THz is confirmed. However, the change in V_Z with temperature is three times higher than reported before. Full article

In this work, the formation of periodic nanostructures on the surface of potassium titanyl phosphate (KTP) has been demonstrated. The surface of KTP single crystals after the processing of argon cluster ions with different energy per cluster atom E/N_mean = 12.5 and 110 eV/atom has been studied using atomic force microscopy (AFM). To characterize the nanostructures, the power spectral density (PSD) functions have been used. The features of the formation of periodic nanostructures are revealed depending on the incident angle of clusters and different energy per atom in clusters. Full article

We investigated the high-purity entangled photon-pair generation in five kinds of “non-poled” potassium titanyl phosphate (KTP) isomorphs (i.e., KTiOPO₄, RbTiOPO₄, KTiOAsO₄, RbTiOAsO₄, and CsTiOAsO₄). The technique is based on the spontaneous parametric down-conversion (SPDC) under Type II extended phase matching (EPM), where the phase matching and the group velocity matching are simultaneously achieved between the interacting photons in non-poled crystals rather than periodically poled (PP) KTPs that are widely used for quantum experiments. We discussed both theoretically and numerically all aspects required to generate photon pairs in non-poled KTP isomorphs, in terms of the range of the beam propagation direction (or the spectral range of photons) and the corresponding effective nonlinearities and beam walk-offs. We showed that the SPDC efficiency can be increased in non-poled KTP isomorphs by 29% to 77% compared to PPKTP cases. The joint spectral analyses showed that photon pairs can be generated with high purities of 0.995–0.997 with proper pump filtering. In contrast to the PPKTP case, where the EPM is achieved only at one specific wavelength, the spectral position of photon pairs in the non-poled KTP isomorphs can be chosen over the wide range of 1883.8–2068.1 nm. Full article

Up-conversion sensing based on optical heterodyning of an IR (infrared) image with a local oscillator laser wave in a nonlinear optical sum-frequency mixing (SFM) process is a practical solution to circumvent some limitations of IR image sensors in terms of signal-to-noise ratio, speed, resolution, or cooling needs in some demanding applications. In this way, the spectral content of an IR image can become spectrally shifted to the visible/near infrared (VIS/NWIR) and then detected with silicon focal plane arrayed sensors (Si-FPA), such as CCD/CMOS (charge-coupled and complementary metal-oxide-semiconductor devices). This work is an extension of a previous study where we recently introduced this technique in the context of optical communications, in particular in FSOC (free-space optical communications). Herein, we present an image up-conversion system based on a 1064 nm Nd³⁺: YVO₄ solid-state laser with a KTP (potassium titanyl phosphate) nonlinear crystal located intra-cavity where a laser beam at 1550 nm 2D spatially-modulated with a binary Quick Response (QR) code is mixed, giving an up-converted code image at 631 nm that is detected with an Si-based camera. The underlying technology allows for the extension of other IR spectral allocations, construction of compact receivers at low cost, and provides a natural way for increased protection against eavesdropping. Full article

The aim of the study is to test the application of different laser wavelengths, with and without different photosensitizing dyes on different types of cultures. Laser irradiation was realized on Streptococcus mutans in both solid and liquid culture media in continuous mode at three different fluences (10, 20, and 30 J/cm²) with a red diode (650 nm) with toluidine blue dye, a blue-violet diode (405 nm) with curcumin dye, and a green diode (532 nm) with erythrosine dye. Without a photosensitizer, no growth inhibition was obtained with the red diode at any fluence value. Inhibition rates of 40.7% and 40.2% were obtained with the blue diode and green diode. The blue diode laser used with curcumin obtained results in terms of growth inhibition up to 99.26% at a fluence of 30 J/cm². The red diode laser used with toluidine blue obtained results in terms of growth inhibition up to 100% at fluences of 20 and 30 J/cm². The KTP (potassium-titanyl-phosphate) laser used with erythrosine was able to determine a complete growth inhibition (100%) at the different fluence values. The combination of a laser and its proper color may dramatically change the results in terms of bactericidal effect. It will be interesting to confirm these data by further in vivo studies. Full article

We demonstrate and analyze a series of experiments in traditional and soft condensed matter using coherent optical spectroscopy and microscopy with ultrafast time resolution. We show the capabilities of resolving both real and imaginary parts of the third-order nonlinearity in the vicinity of Raman resonances from a medium probed within microscopic volumes with an equivalent spectral resolution of better than 0.1 cm⁻¹. We can differentiate between vibrations of various types within unit cells of crystals, as well as perform targeted probes of areas within biological tissue. Vibrations within the TiO₆ octahedron and the ones for the Ti-O-P intergroup were studied in potassium titanyl phosphate crystal to reveal a multiline structure within targeted phonon modes with closely spaced vibrations having distinctly different damping rates (~0.5 ps⁻¹ versus ~1.1 ps⁻¹). We also detected a 1.7–2.6 ps⁻¹ decay of C-C stretching vibrations in fat tissue and compared that with the corresponding vibration in oil. Full article

Studies of polarization reversal processes in potassium titanyl phosphate (KTiOPO₄, KTP) single crystals with surface dielectric layer are important due to their potential applications as the basis of bottom-up technology for creation of periodically poled nonlinear-optical crystals. We present the results of switching currents analysis accompanied by in situ visualization of domain kinetics during polarization reversal in KTP with 3 m-thick photoresist dielectric layer. Qualitative change of the switching current shape has been revealed as compared to the polarization reversal without surface dielectric layer. Two stages of domain structure evolution have been distinguished by in situ visualization of domain kinetics. The formation of submicron domain streamers in front of the moving domain walls has been revealed. The broadening of the domain streamers (1D domain growth) was observed at the second stage. The switching currents were approximated by the modified Kolmogorov-Avrami formula taking into account the change of the growth dimensionality (“geometrical catastrophe”). The sufficient input of the 1D growth to the switching process decreased with increase of the switching field. The obtained results were attributed to the domain wall shape instability induced by retardation of the depolarization field screening in ferroelectric with surface dielectric layer. Full article

High nonlinearity, wide transparency range and optical quality allowed potassium titanyl phosphate (KTiOPO₄, KTP) crystals to be used in a wide range of nonlinear applications. The success of KTP usage in the visible and infrared (IR) ranges drives interest in applying it at longer wavelengths, that is, in the terahertz (THz) range. We use THz optical properties of KTP crystals measured by terahertz time-domain spectrometer (THz-TDS) and refractive index approximated in the form of Sellmeier equations to investigate KTP application possibilities for IR-to-THz and THz-to-THz wave conversion. As a result, phase matching for s − f → f and s − f → s types of difference frequency generation (DFG) of Ti:Sapphire laser (at the wavelengths of 0.65, 0.8 and 1.1 µm) is found possible, as well as second harmonic generation (SHG) of THz waves by f + s→f type of interaction in the XZ principle plane of the crystal. Terahertz wave generation by phase-matched parametric processes in KTP demonstrates evident advantages in comparison with that of widely used MgO-doped LiNbO₃ crystals. Full article