Search Results (74)

Amphiphilic block copolymers are essential for developing advanced polymer nanomaterials with applications in bioimaging, drug delivery, and nanoreactors. In this study, we successfully synthesized functional block copolymer assemblies at high concentrations through redox-initiated reversible addition–fragmentation chain transfer (RAFT) emulsion polymerization of 2-(acetoacetoxy)ethyl methacrylate (AEMA), a β-ketoester functional monomer. Utilizing a redox initiation system at 50 °C, we produced poly(poly(ethylene glycol) methyl ether methacrylate)-b-PAEMA (PPEGMA_n-PAEMA_m). Kinetic studies demonstrated rapid monomer conversion exceeding 95% within 30 min, with distinct polymerization phases driven by micelle formation and monomer depletion. Transmission Electron Microscopy (TEM) and Dynamic Light Scattering (DLS) revealed the formation of diverse morphologies, including worm-like, vesicular structures, and spherical micelles, depending on the macro-CTA molecular weight and monomer concentration. Additionally, post-polymerization modification with aggregation-induced emission (AIE) luminogens, such as 1-(4-aminophenyl)-1,2,2-tristyrene (TPE-NH₂), resulted in AIE-active polymer assemblies exhibiting strong fluorescence in aqueous dispersions. These AIE-active polymer assemblies also exhibited good biocompatibility. These findings demonstrate the efficacy of redox-initiated RAFT emulsion polymerization in fabricating functional, scalable block copolymer assemblies with potential applications in the field of life sciences. Full article

Microfluidic devices are greatly affected by the materials used. The materials used in previous studies had problems in various aspects, such as processing, adsorption, and price. This study will investigate the materials needed to overcome such problems. Various microfluidic devices based on the perfluorinated compound perfluoropolyether (PFPE) were fabricated and mixed with hydrophilic and amphiphilic monomers, including poly(ethylene glycol) diacrylate, polyethylene glycol monomethacrylate, poly(ethylene glycol) methyl ether methacrylate, acrylic acid, and 2-hydroxyethyl methacrylate. A PFPE-based sheet with a repeating structure of hydrophobic and hydrophilic groups was fabricated. Thus, the hydrophilicity of highly hydrophobic PFPE was enhanced. The fluidic channel was engraved on a PFPE-based sheet using laser cutting and a fabricated microfluidic device. The channels of microfluidic devices are micro-scale (100 µm~300 µm). The lipid nanoparticles and droplets generated through the microfluidic device demonstrated uniform particles continuously. Full article

Polydimethylsiloxane (PDMS) is a polymer material characterized by its flexibility, biocompatibility, non-toxicity, excellent stability, and high transparency. It is also easy to process and allows for control over its physical properties. However, its inherent hydrophobicity limits its application in certain fields. To address this limitation, research is being conducted to modify the surface properties of PDMS through polymer grafting. In this work, poly(ethylene glycol) methyl ether methacrylate (mPEG-MA) was grafted onto the PDMS surface to convert its hydrophobic characteristics to hydrophilicity. The tribological properties of the modified PDMS were then evaluated under conditions of hydrophilicity and water lubrication. Polymer grafting was performed by generating radicals on the surface of PDMS through ultraviolet (UV) irradiation using a photoinitiator, followed by grafting with mPEG-MA. The water contact angle, which serves as an indicator of hydrophilicity, was measured and revealed a decrease in the contact angle as the conditions for mPEG-MA grafting were intensified, signifying an increase in hydrophilicity. Additionally, the tribological properties under water lubrication improved with a higher degree of mPEG-MA grafting. Notably, PDMS grafted with a 20 wt.% mPEG-MA aqueous solution via UV irradiation for 12 h consistently maintained a coefficient of friction (COF) of less than 0.02 under water lubrication. Surface damage was observed locally in the dimples only under a load of 3 N. Full article

A series of copolymers containing a thermo-responsive biocompatible first block of poly[di(ethylene glycol) methyl ether methacrylate)-co-(oligo(ethylene glycol) methyl ether methacrylate], P(DEGMA-co-OEGMA) were chain-extended to incorporate either poly(N-isopropylacrylamide), PNIPAAm or poly(N-isopropylacrylamide-co-butyl acrylate), P(NIPAAm-co-BA) as second thermo-responsive block using reversible addition–fragmentation chain transfer (RAFT) polymerization. P(DEGMA-co-OEGMA)-b-PNIPAAm copolymers showed two response temperatures at 33 and 43 °C in an aqueous solution forming stable aggregates at 37 °C. In contrast, P(DEGMA-co-OEGMA)-b-P(NIPAAm-co-BA) copolymers showed aggregation below room temperature due to the shift in response temperature provoked by the presence of hydrophobic butyl acrylate (BA) units, and shrinkage upon heating up to body temperature, while maintaining the second response temperature above 40 °C. The terminal trithiocarbonate group of the block copolymers was modified to a thiol functionality and used to stabilize gold nanorods (GNRDs) via the “grafting to” approach. The Localized Surface Plasmon Resonance (LSPR) absorption band of GNRDs with an aspect ratio of 3.9 (length/diameter) was located at 820 nm after surface grafting with block copolymers showing a hydrodynamic diameter of 160 nm at 37 °C. On the other hand, the stability of the P(DEGMA-co-OEGMA)-b-PNIPAAm@GNRDs and P(DEGMA-co-OEGMA)-b-P(NIPAAm-co-BA)@GNRDs nanohybrids was monitored for 8 days; where the LSPR absorption band did not shift or show any broadening. Aqueous dispersed nanohybrids were irradiated with a near-infrared laser (300 mW), where the temperature of the surroundings increased 16 °C after 16 min, where conditions for no precipitation were determined. These tailored temperature-responsive nanohybrids represent interesting candidates to develop drug nanocarriers for photo-thermal therapies. Full article

Aggregation-induced emission dyes (AIEs) have gained significant interest due to their unique optical properties. Upon aggregation, AIEs can exhibit remarkable fluorescence enhancement. These systems are ideal candidates for applications in bioimaging, such as image-guided drug delivery or surgery. Encapsulation of AIEs in polymeric nanocarriers can result in biocompatible and efficient nanosystems. Herein, we report the fabrication of novel nanoaggregates formulated by amino terpolymer and tetraphenylethylene (TPE) AIE in aqueous media. Poly(di(ethylene glycol) methyl ether methacrylate-co-2-(dimethylamino)ethylmethacrylate-co-oligoethylene glycol methyl ether methacrylate), P(DEGMA-co-DMAEMA-co-OEGMA) hydrophilic terpolymer was utilized for the complexation of the sodium tetraphenylethylene 4,4′,4″,4‴-tetrasulfonate AIE dye. Fluorescence spectroscopy, physicochemical studies, and self-assembly in aqueous and fetal bovine serum media were carried out. The finely dispersed nanoparticles exhibited enhanced fluorescence compared to the pure dye. To investigate the role of tertiary amino groups in the aggregation phenomenon, the polymer was quaternized, and quaternized polymer nanocarriers were fabricated. The increase in fluorescence intensity indicated stronger interaction between the cationic polymer analog and the dye. A stronger interaction between the nanoparticles and fetal bovine serum was observed in the case of the quaternized polymer. Thus, P(DEGMA-co-DMAEMA-co-OEGMA) formulations are better candidates for bioimaging applications than the quaternized ones, presenting both aggregation-induced emission and less interaction with fetal bovine serum. Full article

In this study, poly(HEMA-PEGxMEM-IA) hydrogels were prepared by radical copolymerization of poly(ethylene glycol) methyl ether methacrylate (PEGxMEM), 2-hydroxyethyl methacrylate (HEMA), and itaconic acid (IA). The reaction was carried out in ethanolic solution using N,N′-methylenebisacrylamide (MBA) as a crosslinking agent and 1-hydroxycyclohexyl phenyl ketone (HCPK) as a photo-initiator. The poly(HEMA-PEGxMEM-IA) hydrogels (HGx) were evaluated as a delivery system for ursolic acid (UA), a phytochemical extracted from the plant Clinopodium revolutum, “flor de arena”. The hydrogels were characterized by Fourier-transform infrared spectroscopy (FTIR-ATR), Raman spectroscopy, X-Ray diffraction (XRD), thermogravimetric analysis (TGA), and scanning electron microscopy (SEM). The swelling behavior was studied in buffer solutions from pH 2 to 10, specifically at pH 2.2 (gastric environment) and 7.4 (intestinal environment). It was found that the hydrogels studied showed sensitivity to pH. At pH 2.2, the degree of swelling for HG₅ and HG₉ hydrogels was 0.45 and 0.93 (g water/g hydrogel), respectively. At pH 7.4, the degree of swelling for HG₅ and HG₉ hydrogels was 1.97 and 2.64 (g water/g hydrogel), respectively. The SEM images show the variation in pore size as a function of pH, and the UA crystals in the pores of the hydrogels can also be observed. The in vitro UA release data best fit the Korsmeyer–Peppas kinetic model and the diffusion exponent indicates that the release mechanism is governed by Fickian diffusion. Full article

A series of poly(alkyl methacrylate)s and poly(oligo(ethylene glycol) methyl ether methacrylate)s labeled with 1-pyrenebutanol were referred to as the PyC₄-PC_nMA samples with n = 1, 4, 6, 8, 12, and 18 and the PyC₄-PEG_nMA samples with n = 0–5, 9, 16, and 19, respectively. Pyrene excimer formation (PEF) upon the encounter between an excited and a ground-state pyrenyl labels was employed to determine their persistence length (l_p) in o-xylene. The fluorescence decays of the PyC₄-PC_nMA and PyC₄-PEG_nMA samples were acquired and analyzed with the fluorescence blob model to yield the number (N_blob) of structural units in the volume probed by an excited pyrenyl label. N_blob was found to decrease with an increasing number (N_S) of non-hydrogen atoms in the side chain, reaching a plateau for the PyC₄-PEG_nMA samples with a longer side chain (n = 16 and 19). The N_blob values were used to determine l_p. The l_p values for the PyC₄-PC_nMA and PyC₄-PEG_nMA samples increased linearly with increasing N_S² as predicted theoretically, which agreed with the l_p values obtained by viscometry for a series of PC_nMA samples. The good agreement between the l_p values retrieved by PEF and viscometry served to validate the PEF-based methodology for determining l_p for linear polymers. Full article

Aqueous solutions of a thermoresponsive diblock copolymer poly(di-[ethylene glycol] methyl ether methacrylate)-b-poly(2-[diisopropylamino] ethyl methacrylate) (PDEGMA-b-PDIPAEMA) were studied by static, dynamic and electrophoretic light scattering, small-angle X-ray scattering and differential scanning calorimetry. Thermoresponsive behavior of PDEGMA-b-PDIPAEMA was investigated at two pH values, pH = 2, at which the terminal carboxylic group of the PDEGMA chain and the PDIPAEMA block are protonated, and pH = 7, where the carboxyl terminal group is ionized while the PDIPAEMA block is partially deprotonated and more hydrophobic. Both at pH = 2 and 7, PDEGMA-b-PDIPAEMA copolymer underwent extensive association (the size of the aggregates was between 100 and 300 nm), indicating strong interchain interactions. While the measurements confirmed thermoresponsive behavior of PDEGMA-b-PDIPAEMA at pH = 7, no changes in the association with temperature were observed at pH 2 as the thermoresponsivity of PDEGMA was suppressed by hydrogen bonding between carboxylic groups and PDEGMA segments, as well as due to the increased hydrophilicity of the PDIPAEMA block. Fluorescence measurements with pyrene as a fluorescent probe showed that both at pH = 2 and pH = 7 the associates were able to solubilize hydrophobic substances. Full article

Poly(dimethylsiloxane) (PDMS) coatings are considered to be environmentally friendly antifouling coatings. However, the presence of hydrophobic surfaces can enhance the adhesion rate of proteins, bacteria and microalgae, posing a challenge for biofouling removal. In this study, hydrophilic polymer chains were synthesised from methyl methacrylate (MMA), Poly(ethylene glycol) methyl ether methacrylate (PEG-MA) and 3-(trimethoxysilyl) propyl methacrylate (TPMA). The crosslinking reaction between TPMA and PDMS results in the formation of a silicone-based amphiphilic co-network with surface reconstruction properties. The hydrophilic and hydrophobic domains are covalently bonded by condensation reactions, while the hydrophilic polymers migrate under water to induce surface reconstruction and form hydrogen bonds with water molecules to form a dense hydrated layer. This design effectively mitigates the adhesion of proteins, bacteria, algae and other marine organisms to the coating. The antifouling performance of the coatings was evaluated by assessing their adhesion rates to proteins (BSA-FITC), bacteria (B. subtilis and P. ruthenica) and algae (P. tricornutum). The results show that the amphiphilic co-network coating (e.g., P-AM-15) exhibits excellent antifouling properties against protein, bacterial and microalgal fouling. Furthermore, an overall assessment of its antifouling performance and stability was conducted in the East China Sea from 16 May to 12 September 2023, which showed that this silicon-based amphiphilic co-network coating remained intact with almost no marine organisms adhering to it. This study provides a novel approach for the development of high-performance silicone-based antifouling coatings. Full article

The present study concerns the preparation of hybrid nanostructures composed of carbon dots (CDs) synthesized in our lab and a double-hydrophilic poly(2-dimethylaminoethyl methacrylate-co-oligo(ethylene glycol) methyl ether methacrylate) (P(DMAEMA-co-OEGMA)) random copolymer through electrostatic interactions between the negatively charged CDs and the positively charged DMAEMA segments of the copolymer. The synthesis of P(DMAEMA-co-OEGMA) copolymer was conducted through RAFT polymerization. Furthermore, the copolymer was converted into a strong cationic random polyelectrolyte through quaternization of the amine groups of DMAEMA segments with methyl iodide (CH₃I), and it was subsequently utilized for the complexation with the carbon dots. The molecular, physicochemical, and photophysical characterization of the aqueous solution of the copolymers and their hybrid nanoparticles was conducted using dynamic and electrophoretic light scattering (DLS, ELS) and spectroscopic techniques, such as UV-Vis, fluorescence (FS), and FT-IR spectroscopy. In addition, studies of their aqueous solution using DLS and ELS showed their responsiveness to external stimuli (pH, temperature, ionic strength). Finally, the interaction of selected hybrid nanoparticles with iron (III) ions was confirmed through FS spectroscopy, demonstrating their potential application for heavy metal ions sensing. Full article

The development of convective technologies for antibody purification is of interest to the bioprocessing industries. This study developed a Protein A membrane using a combination of graft polymerization and copper(I)-catalyzed alkyne–azide click chemistry. Regenerated cellulose supports were functionalized via surface-initiated copolymerization of propargyl methacrylate (PgMA) and poly(ethylene glycol) methyl ether methacrylate (PEGMEMA₃₀₀), followed by a reaction with azide-functionalized Protein A ligand. The polymer-modified membranes were characterized using attenuated total reflectance Fourier-transform infrared spectroscopy (ATR-FTIR), gravimetric analysis, and permeability measurements. Copolymer composition was determined using the Mayo–Lewis equation. Membranes clicked with azide-conjugated Protein A were evaluated by measuring static and dynamic binding (DBC₁₀) capacities for human immunoglobulin G (hIgG). Copolymer composition and degree of grafting were found to affect maximum static binding capacities, with values ranging from 5 to 16 mg/mL. DBC₁₀ values did not vary with flow rate, as expected of membrane adsorbers. Full article

Here, we present the synthesis of a series of chemical homopolymeric and copolymeric injectable hydrogels based on polyethylene glycol methyl ether methacrylate (PEGMEM) alone or with 2-dimethylamino ethyl methacrylate (DMAEM). The objective of this study was to investigate how the modification of hydrogel components influences the swelling, rheological attributes, and in vitro biocompatibility of the hydrogels. The hydrogels’ networks were formed via free radical polymerization, as assured by ¹H nuclear magnetic resonance spectroscopy (¹H NMR). The swelling of the hydrogels directly correlated with the monomer and the catalyst amounts, in addition to the molecular weight of the monomer. Rheological analysis revealed that most of the synthesized hydrogels had viscoelastic and shear-thinning properties. The storage modulus and the viscosity increased by increasing the monomer and the crosslinker fraction but decreased by increasing the catalyst. MTT analysis showed no potential toxicity of the homopolymeric hydrogels, whereas the copolymeric hydrogels were toxic only at high DMEAM concentrations. The crosslinker polyethylene glycol dimethacrylate (PEGDMA) induced inflammation in ATDC5 cells, as detected by the significant increase in nitric oxide synthase type II activity. The results suggest a range of highly tunable homopolymeric and copolymeric hydrogels as candidates for cartilage regeneration. Full article

Seven pyrene-labeled poly(oligo(ethylene glycol) methyl ether methacrylate)s (PyEG₅-PEG_nMAs) were prepared with n = 0, 3, 4, 5, 7, 9, and 19 ethylene glycol units by copolymerizing a small amount of penta(ethylene glycol) 1-pyrenemethyl ether methacrylate with an EG_nMA monomer. The conformation of the PyEG₅-PEG_nMA polymers evolved from a random coil for PyEG₅-PEG₀MA or poly(methyl methacrylate) to a polymeric bottle brush (PBB) architecture with increasing side chain length. The fluorescence decays of the PyEG₅-PEG_nMA samples were fitted according to the fluorescence blob model (FBM) whose parameters were used, in combination with the Kratky–Porod equation, to calculate the persistence length of these polymers. The persistence lengths obtained from the PEF experiments were found to increase with the square of the number (N_S) of non-hydrogen atoms in the side chain as expected theoretically. The persistence lengths found with the PyEG₅-PEG_nMA samples in DMF also matched those found earlier for another series of PEG_nMA samples labeled with 1-pyrenebutanol. The good agreement found between the persistence lengths obtained with the PEG_nMA samples labeled with two different pyrene derivatives illustrates the robustness of the method and its applicability for measuring the unknown persistence length of polydisperse polymer samples. Full article

The thermal behavior and aggregation process of the poly(N-isopropyl acrylamide), poly[oligo(ethylene glycol) methyl ether methacrylate], and poly[(2-hydroxyethyl methacrylate)-co-oligo(ethylene glycol) methyl ether methacrylate] thermoresponsive polymers were studied in a commonly used Dulbecco’s Modified Eagle Medium (DMEM) cell culture medium and solutions of its individual components in the same concentration as found in DMEM. All studied copolymers exhibited an unexpected transmittance profile in the DMEM. During heating above the cloud point temperature (T_CP), the polymers additionally aggregated, which led to the formation of their precipitates. The behavior of the polymers was further studied to evaluate how individual salts affected the transition temperature, size (D_h), and stability of the polymer particles. Organic additives, such as amino acids and glucose, had a significantly lesser impact on the thermoresponsive aggregation of the polymers than inorganic ones. Changes to the T_CP were small and the formation of precipitates was not observed. The presence of small amounts of amino acids caused a decrease in the polymer aggregate sizes. Obtained results are of utmost importance in thermoresponsive drug nanocarrier studies. Full article

Molecular conformational changes in the collapsing and reswelling processes occurring during the phase transition at the lower critical solution temperature (LCST) of the polymer are not well understood. In this study, we characterized the conformational change of Poly(oligo(Ethylene Glycol) Methyl Ether Methacrylate)-144 (POEGMA-144) synthesized on silica nanoparticles using Raman spectroscopy and zeta potential measurements. Changes in distinct Raman peaks associated with the oligo(Ethylene Glycol) (OEG) side chains (1023, 1320, and 1499 cm⁻¹) with respect to the methyl methacrylate (MMA) backbone (1608 cm⁻¹) were observed and investigated under increasing and decreasing temperature profiles (34 °C to 50 °C) to evaluate the polymer collapse and reswelling around its LCST (42 °C). In contrast to the zeta potential measurements that monitor the change in surface charges as a whole during the phase transition, Raman spectroscopy provided more detailed information on vibrational modes of individual molecular moieties of the polymer in responding to the conformational change. Full article