Search Results (507)

Cellulose acetate (CA), commercially produced from natural cellulose, is one of the promising candidates to solve the microplastic issue. In this study, attempts were made to prepare CA microparticles by means of melt extrusion of incompatible polymer blends comprising CA with plasticizer (triacetin (TA)) and polyvinyl alcohol (PVA) followed by selective removable of TA and PVA. As implied by semi-theoretical equation previously established by Wu (Wu’s equation), particle size decreased with increasing shear rate or decreasing viscosity ratio of polymers. CA microparticles with a controlled size of 2–8 μm, narrow particle size distribution, and smooth surface were successfully obtained. Efforts were made to determine the numerical solution of Wu’s equation to compare them with observed particle size. To this end, interfacial tension between dispersed and matrix phases to be incorporated in the equation was determined by group contribution methods. The root mean squared error (RMSE) between the observed and calculated particle size was unsatisfactorily large, 4.46 μm. It was found that one of the possible reasons for the limited prediction accuracy was migration of TA from the dispersed to matrix phase affecting the viscosity ratio. Further efforts will be required to achieve a better prediction. Full article

The rapid growth of plant-based biodegradable tableware, driven by plastic restrictions, necessitates rigorous safety assessments of potential chemical contaminants like per- and polyfluoroalkyl substances (PFASs). This study comprehensively evaluated PFAS contamination risks in commercial sugarcane pulp tableware, focusing on the residues of five target PFASs (PFOA, PFOS, PFNA, PFHxA, PFPeA) and their migration behavior under simulated use and takeout conditions. An analysis of 22 samples revealed elevated levels of total fluorine (TF: 33.7–163.6 mg/kg) exceeding the EU limit (50 mg/kg) in 31% of products. While sporadic PFOA residues surpassed the EU single compound limit (0.025 mg/kg) in 9% of samples (16.1–25.5 μg/kg), the levels of extractable organic fluorine (EOF: 4.9–17.4 mg/kg) and the low EOF/TF ratio (3.19–10.4%) indicated inorganic fluorides as the primary TF source. Critically, the migration of all target PFASs into food simulants (water, 4% acetic acid, 50% ethanol, 95% ethanol) under standardized use conditions was minimal (PFOA: 0.52–0.70 μg/kg; PFPeA: 0.54–0.63 μg/kg; others < LOQ). Even under aggressive simulated takeout scenarios (50 °C oscillation for 12 h + 12 h storage at 25 °C), PFOA migration reached only 0.99 ± 0.01 μg/kg in 95% ethanol. All migrated levels were substantially (>15-fold) below typical safety thresholds (e.g., 0.01 mg/kg). These findings demonstrate that, despite concerning residue levels in some products pointing to manufacturing contamination sources, migration during typical and even extended use scenarios poses negligible immediate consumer risk. This study underscores the need for stricter quality control targeting PFOA and inorganic fluoride inputs in sugarcane pulp tableware production. Full article

Background/Objectives: Pancreatic fluid collections (PFCs) in acute pancreatitis require drainage when symptomatic or infected. Walled-off necrosis (WON) is difficult to drain with plastic stents alone. A lumen-apposing metal stent (LAMS) offers larger calibre drainage, lower migration risk than conventional methods, and the option of direct endoscopic necrosectomy through the stent. However, the paediatric literature on LAMSs is sparse. We report our institutional experience, and summarise current evidence on the feasibility, efficacy and safety of LAMSs for PFC drainage in children. Methods: We performed a retrospective study at the National University Hospital (NUH) and a full review of the literature on LAMS use in children for endoscopic trans-gastric drainage of PFCs from April 2012 to September 2024. Results: There were, respectively, 2 (males, 10 and 17 years) and 18 children who underwent endoscopic trans-gastric LAMS insertion for drainage of PFCs in acute pancreatitis in the NUH and across the nine included studies, which were published between 2015 and 2024. The technical and clinical success was 100%. There were no complications during insertion or indwell time (28 and 50 days in the NUH and 40 days, range of 7–100 days in the systematic review, respectively). Endoscopic removal of LAMSs was uneventful. There were no recurrent PFCs over a 4-month (1,7 months) and 12-month (range, 2–44 months) follow-up, respectively. Migration of LAMSs to colon following the collapse of the WON was reported in one case. Conclusions: An transgastric LAMS (with trans-stent necrosectomy) is a technically feasible method of drainage of WON following acute pancreatitis in children with minimal complications. Full article

Background/Objectives: Benign choledochojejunal anastomotic stricture (CJS) is a major late adverse event (AE) after choledochojejunostomy. An endoscopic method using balloon-assisted enteroscopy endoscopic retrograde cholangiopancreatography (BAE-ERCP) was recently developed for CJS. Methods: We retrospectively reviewed 45 patients (98 cases) who underwent BAE-ERCP for benign CJS. The primary endpoint was the success rate of ERCP. The secondary endpoints were AEs and the recurrence rate of benign CJS. Results: ERCP was successful in 36 patients (80%). Balloon dilation of the anastomosis was performed in all 36 patients in whom ERCP was successful, and temporary plastic stent (PS) placement was performed in 20 of these patients (55.6%). Three cases of PS migration and one case of portal vein thrombosis occurred as mild AEs. However, one case of intestinal perforation required emergency surgery for repair. In univariate analysis, proficiency in ERCP procedures (p = 0.019) and surgery at our hospital (p = 0.010) emerged as major factors affecting the procedural success. In univariate analysis, only the early onset of CJS within 400 days after choledochojejunostomy was extracted as a significant factor for the early recurrence of CJS after ERCP (p = 0.036). Conclusions: To ensure successful BAE-ERCP for CJS, it is essential to have proficiency in the ERCP and collect as much detailed information about prior surgery as possible before the procedure. Additionally, the risk of CJS recurrence might be high in patients in whom CJS develops early after surgery. Full article

Beyond its immunological role, colostrum has emerged as a promising, non-invasive source of bioactive factors, including mesenchymal stem/stromal cells (MSCs). This study represents the first attempt to isolate and characterize MSCs from equine colostrum (C-MSCs) to assess their potential use in veterinary regenerative medicine. Colostrum (n = 6) was collected from mares immediately after their delivery and centrifuged, and the recovered cells were cultured under standard conditions. The C-MSCs displayed plastic adherence and a heterogeneous morphology, including spindle-shaped and epithelial-like cells. The population doubling time (PDT) values varied among the samples, and four out of six showed rapid proliferation (<2 days). Colony-forming unit (CFU) assays confirmed their clonogenic potential, though significant inter-sample variability was observed (p < 0.05). Spheroid formation assays revealed differences in cell–cell adhesion: four out of six samples formed stable spheroids within four days. A migration assay showed significant variability (p < 0.05): one out of six achieved complete wound closure within 72 h, whereas five out of six reached ~30% at 96 h. All samples were positive for adipogenic, chondrogenic, and osteogenic differentiation as shown via staining. RT-PCR confirmed MSC marker expression, while hematopoietic markers were absent. MHC-I expression was weak in five out of six samples, whereas MHC-II was consistently negative. These findings support equine colostrum as a viable MSC source, though its variability requires further validation with larger samples. Additional research is needed to investigate C-MSCs’ immunomodulatory properties and therapeutic potential. Full article

Pharmaceutical packaging materials play a crucial role in ensuring the safety and efficacy of medications. This mini-review examines the properties of common packaging materials (glass, plastics, metals, and rubber) and their implications for drug safety. By analyzing 127 research articles from PubMed, Web of Science, and CNKI databases (2000–2025), we also discuss recent regulatory updates in China and highlight emerging technologies, including nanomaterials, sustainable packaging solutions, and intelligent packaging systems that present new opportunities for the pharmaceutical industry. Key findings include the following: (1) The physicochemical properties of packaging materials and potential microbial contamination risks during production significantly impact drug quality and safety, underscoring the need for enhanced research and regulatory oversight. (2) Each material exhibits distinct advantages and limitations: glass demonstrates superior chemical stability but may leach ions; plastics offer versatility but risk plasticizer migration; metals provide exceptional strength yet have limited applications; rubber ensures effective sealing but may release additives compromising drug quality. (3) The pharmaceutical packaging sector is evolving toward intelligent systems and sustainable solutions to address contemporary healthcare challenges. This review can aid pharmaceutical companies in selecting drug packaging and guide manufacturers in developing innovative packaging solutions. Full article

In order to recycle plastic waste back to food contact materials (FCMs), it is necessary to identify hazardous substances in plastic packaging that pose a toxicological risk. Printing inks on plastics are not yet designed to withstand the high heat stress of mechanical recycling processes and therefore require hazard identification. In this study, virgin polypropylene (PP) foils were printed with different types of inks (UV-cured, water-based) and colour shades. Thermal analysis of printed foils and pigments was performed using differential scanning calorimetry (DSC). Samples were then thermally treated below and above measured thermal events at 120 °C, 160 °C, 200 °C or 240 °C for 30 min. Subsequently, migration tests and miniaturised Ames tests were performed. Four out of thirteen printed foils and all three pigments showed positive results for mutagenicity in miniaturised Ames tests after thermal treatment at 240 °C. Additionally, pre-incubation Plate Ames tests (according to OECD 471) were performed on three pigments and one printed foil, yielding two positive results after thermal treatment at 240 °C. These results indicate that certain ink components form hazardous decomposition products when heated up to a temperature of 240 °C. However, further research is needed to gain a better understanding of the chemical processes that occur during high thermal treatment. Full article

Pancreatic cancer is one of the most lethal malignancies, in part due to its profound metabolic adaptability, which underlies drug resistance and therapeutic failure. This study explores the metabolic rewiring associated with resistance to treatment using a systems metabolomics approach. Exposure to the redox-disrupting agent erastin revealed key metabolic vulnerabilities but failed to produce lasting growth suppression. Combinatorial treatments with methotrexate or alpelisib significantly impaired proliferation and triggered marked metabolic shifts. Systems-level analyses identified serine metabolism as a central adaptive pathway in resilient cells. Metabolic tracing and gene expression profiling showed increased de novo serine biosynthesis and uptake, supporting redox homeostasis, biosynthetic activity, and epigenetic regulation. Notably, cells that resumed growth after drug withdrawal exhibited transcriptional reprogramming involving serine-driven pathways, along with elevated expression of genes linked to survival, proliferation, and migration. These findings establish serine metabolism as a functional biomarker of metabolic plasticity and adaptive resilience in pancreatic cancer, suggesting that targeting this adaptive axis may enhance therapeutic efficacy. Full article

Hypoxia is a hallmark of aggressive prostate cancer, but how it disrupts lineage-specific transcriptional programs to drive progression remains unclear. Here, we identify the HIF1α-PHD1-FOXA1 axis as a critical mediator of hypoxic adaptation and androgen signaling suppression. Using genome-wide profiling, we demonstrate that hypoxia reprograms HIF1α chromatin occupancy, shifting its cooperation from AR to FOXA1. Mechanistically, HIF1α physically interacts with FOXA1, destabilizing it via PHD1-mediated hydroxylation—a previously unrecognized post-translational regulatory node. Under hypoxia, loss of FOXA1 attenuates androgen-responsive transcription while activating hypoxia-inducible genes, demonstrating a dual role for this axis in hypoxia adaptation and prostate cancer progression. Genetic or pharmacological disruption of HIF1α-PHD1-FOXA1 impairs prostate cancer proliferation and migration, underscoring its translational relevance. Our findings establish oxygen-dependent FOXA1 degradation as a linchpin connecting microenvironmental stress to transcriptional plasticity in advanced prostate cancer, offering new therapeutic avenues. Full article

The recycling of post-consumer plastics for food-contact applications is subject to stringent regulatory requirements, particularly with regard to the removal of potentially harmful non-intentionally added substances (NIAS). While polyethylene terephthalate (PET) recycling processes are already approved by the European Food Safety Authority (EFSA), there is a lack of guidance for other polymers like polystyrene (PS). This study aims to provide a scientific basis for assessing the decontamination efficiency required for recycled post-consumer PS in food-contact applications. As one of the first studies to propose a framework for PS decontamination assessment based on EFSA food-consumption data and conservative diffusion modeling, it contributes to filling this regulatory gap. First, European food-consumption data were analyzed to identify critical scenarios of the age-group-dependent intake of PS-packaged food. Based on this, a conservative migration model was applied using a one-dimensional diffusion simulation to determine the maximum allowable initial concentrations of NIAS in PS. The calculated values were then compared with published reference contamination levels to calculate the required cleaning efficiency. The combination of food-consumption values and the migration process showed that trays for fruits and vegetables are the most critical food-contact application for post-consumer PS recycling. The most stringent assumptions resulted in necessary decontamination efficiencies ranging from 92% for the smallest molecule, toluene (92.14 g/mol), to 42% for the largest molecule, methyl stearate (298.50 g/mol). The results provide a methodological basis for regulatory assessments and offer practical guidance for designing safe recycling processes, thereby supporting the circular use of PS in food packaging and building the basis for future regulatory assessments of other polymers, in line with the European Union Plastics Strategy and circular economy objectives. Full article

Non-intentionally added substances (NIAS) in plastic food contact materials represent a critical undercharacterized chemical safety concern, caused by their inherent diversity, potential toxicity, and regulatory challenges. This review synthesizes recent advances and persistent gaps in NIAS analysis, with a primary focus on analytical workflows for non-targeted analysis, alongside a consideration of risk assessment and toxicological prioritization frameworks. Conventional plastics (e.g., polyethylene, polypropylene, or polyethylene terephthalate) as well as emerging materials (e.g., bioplastics and recycled polymers) exhibit different NIAS profiles, including oligomers, degradation products, additives, and contaminants, requiring specific approaches for migration testing, extraction, and detection. Advanced techniques, such as ultra-high-performance liquid chromatography or two-dimensional gas chromatography coupled with high-resolution mass spectrometry, have enabled non-targeted analysis approaches. However, the field remains constrained by spectral library gaps, limited reference standards, and inconsistent data processing protocols, resulting in heavy reliance on tentative identifications. Risk assessment procedures mainly employ the Threshold of Toxicological Concern and classification by Cramer’s rules. Nevertheless, addressing genotoxicity, mixture effects, and novel hazards from recycled or bio-based polymers remains challenging with these approaches. Future priorities and efforts may include expanding spectral databases, harmonizing analytical protocols, and integrating in vitro bioassays with computational toxicology to refine hazard characterization. Full article

Infectious wounds pose formidable clinical challenges due to hypoxia, exacerbated inflammation, and persistent microbial colonization. To address this, we developed a bioinspired multifunctional hydrogel (PTDPs) through the in situ freeze-thaw co-assembly of polyvinyl alcohol (PVA), tea polyphenols (TP), polydopamine (PDA), and marine-derived self-assembling peptides (AAPs). The resultant PTDP hydrogel formed an intricate hydrogen-bonded network that enhanced mechanical robustness and substrate adhesion. TP and PDA synergistically confer potent antioxidant properties: TP scavenges radicals via phenolic hydroxyl groups while PDA enhances responsiveness to diverse radicals in hypoxic environments. Integrated with AAPs’ pro-regenerative functions and PDA’s broad-spectrum antimicrobial efficacy, this system generates therapeutic synergy. Characterization revealed outstanding physicochemical properties including tunable plasticity, high swelling ratios, and sustained hydration retention. In vitro studies demonstrated potent antioxidant activity, efficient inhibition of Staphylococcus aureus and Escherichia coli proliferation, and cytocompatibility facilitating endothelial cell migration/proliferation. In murine full-thickness infected wound models, the PTDP hydrogel significantly accelerated wound closure, enhanced neovascularization, and improved collagen deposition, underscoring its potential as an innovative therapeutic platform for infected and chronic wounds with strong translational prospects. Full article

Bio-based and/or biodegradable food contact materials are being developed as alternatives to conventional petroleum-based materials. Like other food contact materials, these are subject to regulatory requirements. The characterization of these biomaterials enables the identification of chemical substances that could potentially migrate from these materials into food and may pose a risk to consumer health. In this work, commercial samples of food contact materials labeled as bio-based and/or biodegradable were analyzed. To tentatively identify compounds, two analytical methods were optimized: purge and trap (P&T) for volatile compounds and methanolic extract injection for the determination of semi-volatile compounds, both using gas chromatography coupled with mass spectrometry (GC-MS). Compound toxicity was estimated using an in silico methodology, namely Cramer’s rules. More than 200 compounds of different natures were tentatively identified, but only 29 are included in Regulation (EU) 10/2011 on plastic materials intended to come into contact with food, and 38 of them were classified as high-toxicity compounds. Full article

Background: Subcutaneous pocket infection is a common morbidity associated with the integration of cardiac implantable electronic devices (CIEDs). A new antibiotic-eluting CIED bioenvelope has been developed as a prophylactic measure to mitigate infection and skin erosion caused by device migration. This study investigated the envelope’s regulatory properties in scar formation and vascularization. Methods: Fibroblasts were seeded on either plastic (n = 6) or small intestine submucosal extracellular matrix (SIS-ECM) (n = 6) for 24 h. The culture media were analyzed for proangiogenic and proinflammatory proteins with multiplex. Sham (n = 8) or SIS-ECM (n = 8) was randomly implanted into the dorsal subcutaneous pocket of mice. The implants were excised on day 7, cultured for 24 h, and the media analyzed. Rabbit models were implanted with either synthetic polymer HDPE (n = 12) or SIS-ECM (n = 11). The treatments were excised at weeks 2, 10, and 26 and then stained for analysis. Results: SIS-ECM significantly increased the fibroblasts’ paracrine release of proangiogenic and proinflammatory factors like VEGF-A (p < 0.05) and IL-6 (p < 0.05) compared with plastic. The murine tissue interacting with SIS-ECM released significantly more angiogenic proteins like VEGF-A (p < 0.05) than the sham. The histology analysis of rabbit subcutaneous tissue revealed a decreasing level of inflammation and fibrosis over time with SIS-ECM. Conclusions: The CIED bioenvelope elicited proangiogenic paracrine signaling and reduced fibrotic response in fibroblasts and animal models. Clinical translation of the CIED bioenvelope as an adjunct to regular prophylactic practice may be warranted in the future. Full article

This study investigates the potential of rapeseed meal (RM), a protein-rich by-product of the rapeseed oil industry, as a raw material for the development of renewable materials. Due to the presence of antinutritional compounds, rapeseed meal is underutilized, primarily in low-value applications such as animal feed. In this work, rapeseed meal protein hydrolysates were enzymatically obtained and incorporated as plasticizers into rapeseed meal-based materials to improve their mechanical properties, water permeability, and thermal stability. Collagen hydrolysate has also been utilized as a low-cost additive to further enhance the material performance. The glycerol content was reduced to address permeability and migration issues associated with hydrophilic plasticizers. The results demonstrated that the incorporation of hydrolysates into rapeseed meal-based materials modulated thermal stability, water permeability, and mechanical properties—particularly elongation at break and flexibility. The latter increased proportionally with the hydrolysate content of RM-based materials. Additionally, aerobic biodegradation behavior, thermogravimetric analysis (TGA), and differential scanning calorimetry (DSC) supported the material’s favorable performance characteristics, highlighting the potential of rapeseed meal as a viable, biodegradable alternative for sustainable materials in industrial applications. Full article