Search Results (21)

Soil contamination with heavy metals poses a significant risk to human health and ecological systems through multiple exposure pathways: direct ingestion of crops, dermal contact with polluted soil, and bioaccumulation within the food chain. This study analyses eleven composite soils, each collected in triplicate from different sites in Iași County, four of which are designated Natura 2000 protected areas (Mârzești Forest, Plopi Lake—Belcești, Moldova Delta, and Valea lui David). The assessment includes measurements of soil humidity by the gravimetric method, pH, and organic matter content, examined in relation to heavy metal concentrations due to their well-established interdependencies. For heavy metal determination, energy-dispersive X-ray spectroscopy (EDS) using an EDAX system (AMETEK Inc., Berwyn, PA, USA) and X-ray fluorescence spectrometry (XRFS) with a Vanta 4 analyser (Olympus, Waltham, MA, USA) were employed. Additionally, scanning electron microscopy (SEM) with a Quanta 450 microscope (FEI, Thermo Scientific, Hillsboro, OR, USA) was used primarily for informational purposes and to provide a broader perspective. In the case of chromium, 45.45% of the samples exceeded the permissible levels, with concentrations ranging from 106 mg/kg to 186 mg/kg, the highest value being nearly twice the alert threshold. Notably, not all protected areas maintain contaminant levels within safe limits. The sample from the Mârzești Forest protected site revealed considerably raised concentrations of mercury, arsenic, and lead, exceeding the alert thresholds (1 mg/kg—mercury, 15 mg/kg—arsenic, and 50 mg/kg—lead) established through Order no. 756/1997 issued by the Minister of Water, Forests, and Environmental Protection from Romania. On the other hand, the sample from Podu Iloaiei, an area with intensive agricultural activity, shows contamination with mercury and cadmium, highlighting significant anthropogenic pollution. The findings of this study are expected to raise public awareness regarding soil pollution levels, particularly in densely populated regions and protected ecological zones. Moreover, the results provide a scientific basis for policymakers and relevant authorities to implement targeted measures to manage soil contamination and ensure long-term environmental sustainability. Full article

Biochar is a stabilised, carbon-rich material created when biomass is heated to temperatures usually between 450 and 550 °C, under low-oxygen concentrations. This study evaluated the effectiveness of sawdust, cocoa pod ash and rice husk biochars in remediating metal-contaminated paddy soil in Nobewam, Ghana. Biochar was applied 21 days before cultivating the rice for 120 days, followed by soil sampling and rice harvesting for metals and physicochemical analyses. Compared to the untreated soils, biochar treatments exhibited an enhancement in soil quality, characterised by an increase in pH of 1.01–1.20 units, an increase in available phosphorus (P) concentration of 6.76–13.05 mg/kg soil and an increase in soil total nitrogen (N), and organic carbon (OC) concentration, ranging from 0.02% to 0.12%. Variabilities in electrical conductivity and effective cation exchange capacity were observed among the treated soils. Concentrations of potentially toxic metals (arsenic, cadmium, copper, mercury, lead and zinc) in paddy soils and rice analysed by atomic absorption spectroscopy showed significant differences (p < 0.05) among the sampled soils. The concentrations of arsenic and lead in all soil samples exceeded the Canadian Council of Ministers of the Environment soil quality guideline for agricultural soils, with untreated soils having the highest levels among all the soils. Cadmium had a potential ecological risk index > 2000 and a geoaccumulation index above 5, indicating pollution in all samples. In contrast, arsenic and mercury contamination were only found in the untreated soils. Among the tested treatments, rice husk and its combinations, particularly with cocoa pod ash, showed significant efficacy in reducing metal concentrations in the soils. The potential non-carcinogenic human health risks associated with the consumption of rice grown in biochar-treated soils were lower for all the metals compared to the control samples. Future research should focus on long-term field studies to validate these findings and explore the underlying mechanisms governing metal immobilization in paddy fields. Full article

A future radioactive waste management centre is under development in central Croatia. One of the activities in the centre’s development was to monitor environmental radioactivity before the disposal of radioactive materials. Part of the monitoring programme focused on soil characterisation in the municipality (total area 1308 km²) surrounding the centre, where about 40% of the soil is today used in organic farming. The study included a physico-chemical and radionuclide characterisation of the soil as well as ambient dose rate measurements. The aim of this study was to investigate how the physical and chemical composition of soil affects the concentration of radionuclides ²³⁸U, ⁴⁰K, and ¹³⁷Cs in soil, based on the measured radionuclide concentrations and values of selected soil parameters. Additionally, the ambient equivalent dose rate H*(10)/t was measured and the annual effective dose was calculated for the average person living in the area of interest. The observed ranges of radionuclide concentrations in the soil samples were: 9–72 Bq/kg for ²³⁸U, 65–823 Bq/kg for ⁴⁰K, and 4–80 Bq/kg for ¹³⁷Cs. Ambient dose equivalent rate measurements were in the range of 52–130 nSv/h. The highest measured values were in correlation with higher ²³⁸U activity concentrations in these parts of the investigated area. The results of this study showed that ²³⁸U had a significant correlation with pH; plant available P; sand, silt, and clay content; hydrolytic acidity; CaCO₃; total carbon, organic matter, and total inorganic and organic carbon; and concentrations of Al, Si, Fe, Ca, Ti, K, Rb, Zr, Nb, Y, Sr, Th, and W. ⁴⁰K showed a significant correlation with pH, sand content, hydrolytic acidity, total hydrogen, total nitrogen, CaCO₃, total carbon, total inorganic carbon, and concentrations of Al, Si, Fe, Ca, Ti, Rb, Zr, Nb, P, Y, Zn, and Th. ¹³⁷Cs showed a significant correlation with silt content, total nitrogen, and Si concentration. Full article

Polybrominated diphenyl ethers (PBDEs) have been used for many years as flame retardants. Due to their physicochemical and toxicological properties, they are considered to be persistent organic pollutants (POPs). BDE-209 is the main component of deca-BDE, the one PBDE commercial mixture currently approved for use in the European Union. The aim of this study was to analyse BDE-209 in surface soil samples from Warsaw and surrounding areas (Poland) as an indicator of environmental pollution with PBDEs, and to characterise the associated health risk. A total of 40 samples were analysed using gas chromatography with electron capture detection (GC-µECD). Concentrations of BDE-209 in soil ranged from 0.4 ng g⁻¹ d.w. (limit of quantification) to 158 ng g⁻¹ d.w. Overall, 52.5% of results were above the method’s limit of quantification. The highest levels were found at several locations with heavy traffic and in the vicinity of a CHP plant in the city. The lowest concentrations were observed in most of the samples collected from low industrialized or green areas (<0.4 to 1.68 ng g⁻¹ d.w.). Exposure to BDE-209 was estimated for one of the most sensitive populations, i.e., young children. The following exposure routes were selected: oral and dermal. No risk was found to young children’s health. Full article

Soil pollution with heavy metals is a problem for the whole geosystem. The aim of the research is to identify new solutions for extracting heavy metals from polluted soils so that they can be further exploited. To this end, investigations of the physicochemical characteristics of the soil sample under study were carried out. Following the analyses, the soil was characterised as lute-coarse sand (UG) with a strongly acidic pH (4.67), a hygroscopicity coefficient (CH = 4.8% g/g), and a good supply of nutrients: nitrogen (N_t): 0.107%; mobile phosphorus (P_AL): 6 mg kg⁻¹ and mobile potassium (K_AL): 26 mg kg⁻¹, but is low in humus (2.12%). The metal content of the soil was determined by atomic absorption spectrometry (AAS), and the analyses showed high concentrations of metals (Pb: 27,660 mg kg⁻¹; Cu: 5590 mg kg⁻¹; Zn: 2199 mg kg⁻¹; Cd: 11.68 mg kg⁻¹; Cr: 146 mg kg⁻¹). The removal of metals (Pb, Cu, Zn, Cd, and Cr) from polluted soil by different extraction agents (water, humus, malic acid, chitosan, and gluconic acid) was investigated. Metal extraction experiments were carried out in a continuous orbital rotation-oscillation stirrer at a solid/liquid/ (S/L ratio; g:mL) of 1:4, at two concentrations of extraction solution (1% and 3%), and at different stirring times (2, 4, 6, and 8 h). The yield of the extraction process is very low for all proposed extraction solutions. The maximum values of extraction efficiency are: 0.5% (Pb); 3.28% (Zn); and 5.72% (Cu). Higher values were obtained in the case of Cr (11.97%) in the variant of using humus 3% as an extraction solution at a stirring time of 6 h. In the investigated experimental conditions, the best removal efficiencies were obtained in the case of cadmium (26.71%) when using a 3% malic acid solution. In conclusion, it is considered that, from case to case, the type of extraction solution as well as the nature of the metal influence the mechanism of the depollution process, i.e., the capacity of the fine soil granules to free themselves from the pollutant metal that has adhered to them, and further research is considered necessary in the future. Full article

Salt-affected soils have detrimental effects on agriculture and ecosystems. However, these soils can still be used for halophyte (salt-tolerant plants) cultivation using brackish and/or saline water. In this study, we employed soil technologies and mutualistic microorganisms as a sustainable strategy to improve the growth and reproduction of the halophyte Limonium algarvense Erben’s growth and reproduction under saline conditions. A microcosm assay was conducted under controlled greenhouse conditions to cultivate L. algarvense using a saline Fluvisol (FLU) amended—or not—with a Technosol (TEC). Plants were inoculated with the arbuscular mycorrhizal fungus (AMF) Rhizoglomus irregulare and/or a consortium of plant growth-promoting bacteria (PGPB), and they were irrigated with estuarine water. Soil enzyme analysis and physicochemical characterisation of the soils, collected at the beginning and at the end of the assay, were carried out. The physiological status of non-inoculated and inoculated plants was monitored during the assay for 4 months, and AMF root colonisation was evaluated. In FLU, only plants inoculated with the AMF survived. These plants had lower number of leaves, and shoot and root dry biomass than the ones grown in the TEC by the end of the assay. In the TEC, PGPB inoculation led to higher NDVI and PRI values, and AMF inoculation promoted higher reproductive development but not pollen fertility. The findings show that the combined use of soil and microbial technologies can be successfully applied to cultivate L. algarvense, suggesting their generalized use for other Limonium species with economic interest, while contributing to the sustainable use of marginal lands. Full article

Biochar (BC) has been a viable resource in producing functionalised carbonaceous materials beneficial in soil fertility, environmental remediation, and energy recovery. In this study, the influence of Na₂CO₃ on the pyrolytic conversion of green pea peels to BC was examined to assess BC’s yield and physicochemical characteristics. Experiments were conducted in batch processes at a constant temperature of 500 °C by wet impregnation using 0%, 10%, 20%, and 30% (w/w) ratios of Na₂CO₃ catalyst to biomass weight. Characterisations of the produced BC materials were conducted by bomb calorimetry, SEM, BET, FTIR, and XRD. Accordingly, catalyst incorporation by pretreatment resulted in a decrease in yield while increasing the porous development. The specific surface area at a constant temperature increased from 1.006 to 17.7 m² g⁻¹, and the pore diameter decreased from 173.1 to 9.283 nm. The oxygenated functional groups negatively correlated with the increase in the amount of catalyst, whereas the calorific values of the synthesised materials increased from 20.313 kJ g⁻¹ to 25.479 k Jg⁻¹ when the catalyst impregnation ratio was enhanced from 0% to 30%, indicating that BC produced from catalysed processes demonstrates better energy recovery potential. Full article

Biochar is considered one of the most promising long-term solutions for soil quality improvement, representing an ideal environment for microorganisms’ immobilization. Hence there is a possibility to design microbial products formulated using biochar as a solid carrier. The present study was aimed at development and characterization of Bacillus-loaded biochar to be applied as a soil amendment. The producing microorganism Bacillus sp. BioSol021 was evaluated in terms of plant growth promotion traits, indicating significant potential for production of hydrolytic enzymes, indole acetic acid (IAA) and surfactin and positive tests for ammonia and 1-aminocyclopropane-1-carboxylic acid (ACC) deaminase production. Soybean biochar was characterised in terms of physicochemical properties to evaluate its suitability for agricultural applications. The experimental plan for Bacillus sp. BioSol021 immobilisation to biochar included variation of biochar concentration in cultivation broth and adhesion time, while the soil amendment effectiveness was evaluated during maize germination. The best results in terms of maize seed germination and seedling growth promotion were achieved by applying 5% of biochar during the 48 h immobilisation procedure. Germination percentage, root and shoot length and seed vigour index were significantly improved when using Bacillus-biochar soil amendment compared to separate treatments including biochar and Bacillus sp. BioSol021 cultivation broth. The results indicated the synergistic effect of producing microorganism and biochar on maize seed germination and seedling growth promotion, pointing out the promising potential of this proposed multi-beneficial solution for application in agricultural practices. Full article

Salt efflorescences from metal sulphides and their waste are important drivers of pollution both in and around mining areas. However, little is known about these supergene minerals, particularly in the mining areas of the Mediterranean. This study aims to characterise saline efflorescences and their leachates from a Mediterranean mining area located in Southeast Spain. The physicochemical characteristics were determined using stereomicroscopy and compositional analysis, with the following techniques: XRD, WDXRF and TG-MS. Additionally, to assess the risk and potential mobility of their analytes, the samples were subjected to the leaching test DIN 38414-S4. The results showed that the salt efflorescences presented a wide range of crystalline habits and colours. Sulphates were by far the largest mineral group, followed by silicates, oxides and sulphides. Their geochemistry was dominated by elements such as S or Fe, although other potentially toxic elements such as Cd, As, Zn, Pb, Ni and Cu were also present. Due to their high metal(loid) concentrations, the salt crusts studied may act as sources of environmental contaminants, demonstrating that their leachates pose a considerable risk to soil and drinking water quality. An analysis of the correlations and provenances of the components of the salt efflorescences revealed the possible presence of some rare supergene minerals of great interest, such as cuprocopiapite and Pb-As-jarosite. Full article

Soil salinity is considered to be a major impediment to the production of rice among other abiotic stresses. In this study, 16S rRNA Illumina amplicon sequencing was performed to characterise the halophilic communities entrapped in rice rhizosphere soil cultivated in different planting systems (conventional, aerobic and System of Rice Intensification (SRI)) under saline conditions. The physicochemical properties and urease, soil dehydrogenase, alkaline phosphatase and arylsulphatase activity of soil samples were evaluated to understand their influence on the bacterial communities of the soil. Electrical conductivity (EC) of soil was lower in SRI soil samples, while the available major soil nutrients (nitrogen, phosphorous and potassium) content and soil enzyme activities such as dehydrogenase, alkaline phosphatase, urease and arylsulphatase were higher. A total of 2,516,700 reads were generated by amplicon sequencing of the hypervariable V3–V4 regions of bacterial 16S rRNA gene and were clustered into 273,447 OTU operational taxonomic units. The total number of Operational Taxonomic Units (OTUs) was higher in the conventional soil samples compared to the SRI and aerobic soil samples. Metagenomic analysis revealed that Proteobacteria was the most dominant phyla in all the planting systems followed by Actinobacteria, Firmicutes and Chloroflexi. The alpha diversity index was higher in conventional soil samples compared to other samples and more species diversity was found in SRI soil samples. KEGG analysis revealed that bacterial communities in different soil samples showed varied functional properties. The bacterial diversity of saline soil in this study can be utilised to identify microbial communities with biotechnological potential that can be employed for plant growth promotion in saline environments. Full article

This study aimed to assess the physicochemical, microbiological and toxicological hazards at an illegal landfill in central Poland. The research included the analysis of airborne dust (laser photometer), the number of microorganisms in the air, soil and leachate (culture method) and the microbial diversity in the landfill environment (high-throughput sequencing on the Illumina Miseq); the cytotoxicity (PrestoBlue) and genotoxicity (alkaline comet assay) of soil and leachate were tested. Moreover, an analysis of UHPLC-Q-ToF-UHRMS (ultra-high-performance liquid chromatography-quadrupole-time-of-flight ultrahigh-resolution mass spectrometry) was performed to determine the toxic compounds and microbial metabolites. The PM₁ dust fraction constituted 99.89% and 99.99% of total dust and exceeded the threshold of 0.025 mg m⁻³ at the tested locations. In the air, the total number of bacteria was 9.33 × 10¹–1.11 × 10³ CFU m⁻³, while fungi ranged from 1.17 × 10² to 4.73 × 10² CFU m⁻³. Psychrophilic bacteria were detected in the largest number in leachates (3.3 × 10⁴ to 2.69 × 10⁶ CFU mL⁻¹) and in soil samples (8.53 × 10⁵ to 1.28 × 10⁶ CFU g⁻¹). Bacteria belonging to Proteobacteria (42–64.7%), Bacteroidetes (4.2–23.7%), Actinobacteria (3.4–19.8%) and Firmicutes (0.7–6.3%) dominated. In the case of fungi, Basidiomycota (23.3–27.7%), Ascomycota (5.6–46.3%) and Mortierellomycota (3.1%) have the highest abundance. Bacteria (Bacillus, Clostridium, Cellulosimicrobium, Escherichia, Pseudomonas) and fungi (Microascus, Chrysosporium, Candida, Malassezia, Aspergillus, Alternaria, Fusarium, Stachybotrys, Cladosporium, Didymella) that are potentially hazardous to human health were detected in samples collected from the landfill. Tested leachates and soils were characterised by varied cyto/genotoxins. Common pesticides (carbamazepine, prometryn, terbutryn, permethrin, carbanilide, pyrethrin, carbaryl and prallethrin), quaternary ammonium compounds (benzalkonium chlorides), chemicals and/or polymer degradation products (melamine, triphenylphosphate, diphenylphtalate, insect repellent diethyltoluamide, and drugs (ketoprofen)) were found in soil and leachate samples. It has been proven that the tested landfill is the source of the emission of particulate matter; microorganisms (including potential pathogens) and cyto/genotoxic compounds. Full article

In this study, we analysed the Gioia Tauro Plain (Tyrrhenian coast, southern Italy) in terms of hydrostratigraphy and the physicochemical status of groundwater. We investigated the hydrostratigraphic framework of the area identifying a deep aquifer (made by late Miocene succession), an aquitard (consisting of Pliocene clayey and silty deposits) and a shallow aquifer (including Late Pleistocene and Holocene marine and alluvial sediments) using subsoil data (boreholes and geophysics). Our reconstruction showed that the structural geology controls the spatial pattern of the aquitard top and the shallow aquifer thickness. Furthermore, we evaluated the hydraulic conductivity for the shallow aquifer using an empirical method, calibrated by slug tests, obtaining values ranging from 10⁻⁴ to 10⁻⁵ m/s with a maximum of 10⁻³ m/s located close to inland dune fields. The piezometric level of the shallow aquifer recorded a significant drop between the 1970s and 2021 (−35 m as the worst value). It is the effect of climate and soil use changes, the latter being the increased water demand for kiwi cultivation. Despite the overexploitation of the shallow aquifer, shallow groundwater is fresh (736 µS/cm as mean electrical conductivity) except for a narrow coastal area where the electrical conductivity is more than 1500 µS/cm, which can be due to the seawater intrusion. What was more complex was the physicochemical status of the deep aquifer characterised by high temperature (up to 25.8 °C) and electrical conductivity up to 10,520 µS/cm along the northern and southern plain boundaries marked by tectonic structures. This issue suggested the dominant role of the local fault system that is likely affecting the deep groundwater flow and its chemical evolution. Full article

The paper describes a method of modifying a commercial viscose nonwoven fabric and its use as a modern mulching material in agriculture. The conducted research confirmed that the proposed modification of the viscose nonwoven fabric could be successfully used as a multipurpose and, above all, completely biodegradable nonwoven crop cover, which will eliminate the problem of disposal after the harvest period. Modified cellulose nonwoven fabric was obtained by staining with NB—BT helion brown, then padding with potassium nitrate (KNO₃) solution (used as a fertilizer) and finally coating with polylactide (PLA) solution. The characterisation of the nonwoven fabric included structural analysis, physicochemical properties and mechanical tests. The modified cellulose nonwovens were used in the tunnel cultivation of tomatoes as a heat-retardant, water-absorbing, antiweed mulching material that prevents soil infestation and slowly releases fertilizers. Full article

Technosols are artificial soils generated by diverse human activities and frequently contain toxic substances resulting from industrial processes. Due to lack of nutrients and extreme physico-chemical properties, they represent environments with limited bacterial colonization. Bacterial populations of technosols are dominated usually by Actinobacteria, including streptomycetes, known as a tremendous source of biotechnologically important molecules. In this study, the biodiversity of streptomycete-like isolates from several technosols, mainly mine soils and wastes (landfills and sludge) in Slovakia, was investigated. The combination of basic morphological and biochemical characterisations, including heavy metal resistance determination, and molecular approaches based on 16S rRNA gene analysis were used for the identification of the bacterial strains. From nine isolates of Actinobacteria collected from different habitats, one was found to represent a new species within the Crossiella genus. Eight other isolates were assigned to the genus Streptomyces, of which at least one could represent a new bacterial species. Some isolates showed high resistance to Pb, Zn, Cu or Ni. The most tolerated metal was Pb. The results obtained in this study indicate that technosols are a prospective source of new actinomycete species resistant to heavy metals what underlines their bioremediation potential. Full article

Poor soil fertility caused mainly by low and declining soil organic carbon is one of the major constraints limiting crop productivity in tropical and subtropical regions of South Africa. We evaluated the effect of macadamia husk compost (MHC) on selected chemical and physical properties of a sandy loam soil in NE South Africa in two successive seasons. The treatments, laid out in randomised, complete block design and replicated four times, were: (i) zero control, (ii) inorganic fertilizer (100:60:60 NPK Kg ha⁻¹), (iii) MHC at 15 t ha⁻¹, and (iv) MHC at 30 t ha⁻¹. Soil bulk density; water holding capacity; soil pH; electrical conductivity (EC); organic carbon; total N; and available P, K, Ca, Mg, Al, Zn, and Cu were determined at 0–15 cm soil depth. Macadamia husk compost application decreased bulk density and increased water holding capacity. MHC and inorganic fertilizer increased soil pH, organic carbon, total N, C:N ratio, available P, exchangeable cations, and micronutrients but the effect was more pronounced under MHC treatments in both seasons. The positive effect of MHC on soil physicochemical properties was associated with an increase in soil organic carbon due to MHC application; hence, MHC may offer a sustainable option of increasing soil productivity, particularly in areas characterised by low SOC. Full article