Search Results (34)

Metal–organic frameworks (MOFs), particularly ZIF-8, have emerged as promising materials due to their high porosity, tunability, and chemical stability. In this study, we report the synthesis of ZnFe₂O₃-doped ZIF-8 composites with 10 wt% loading via a solvothermal method to enhance their optical and photocatalytic performance. Structural analyses confirmed the successful incorporation of ZnFe₂O₃ without disrupting the ZIF-8 framework. Optical studies revealed enhanced absorption in the visible range, a narrowed bandgap (4.26 eV vs. 4.37 eV for pristine ZIF-8), and an increased extinction coefficient, indicating superior light-harvesting potential. The photocatalytic activity was evaluated by methylene blue (MB) degradation under visible light, where the 10 wt% ZnFe₂O₃-ZIF-8 composite achieved 90% degradation efficiency, outperforming pristine ZIF-8 (67.8%). The catalyst also demonstrated excellent recyclability over five cycles and a proposed degradation mechanism involving ·OH and ·O₂⁻ radical formation. These findings demonstrate the potential of highly doped ZnFe₂O₃@ZIF-8 composites for environmental remediation and photonic applications. Full article

The exponential growth of plastic production in the healthcare sector and the limited capacity of conventional recycling systems have created a global environmental challenge. Latest 3D printing technologies have the potential to solve this problem by enabling on-demand, localized manufacturing. This study aimed to investigate the mechanical properties of 3D-printed ABS composites with Bi₂O₃ fillers after multiple recycling and irradiation cycles to assess their suitability for creating robust, reusable supporting devices for radiotherapy. Filaments of PLA, ABS, and ABS composites enriched with 5 wt% and 10 wt% Bi₂O₃ were extruded, repeatedly recycled through shredding and re-extrusion up to ten times and irradiated to 70 Gy using a 6 MeV photon beam to simulate clinical radiotherapy conditions. In contrast to PLA, ABS demonstrated better recyclability; however, after ten recycling cycles, its tensile strength declined from 25.1 MPa to 20.9 MPa, and its Young’s modulus decreased from 2503.5 MPa to 1410.4 MPa. Incorporation of 5 wt% Bi₂O₃ into ABS significantly improved recyclability and mechanical retention. After ten recycling rounds, an ABS composite containing 5 wt% Bi₂O₃ retained tensile strength of 22.2 MPa, modulus of 1553.9 MPa, and strain at break of 14.4%. In contrast, the composite enforced with 10 wt% Bi₂O₃ showed slightly lower performance, likely due to filler agglomeration. Under irradiation, the ABS–5 wt% Bi₂O₃ composite exhibited minimal additional degradation, maintaining mechanical integrity superior to other materials. These results indicate that ABS–5 wt% Bi₂O₃ is a promising, recyclable material for durable, patient-specific devices in radiotherapy, supporting sustainability in medical manufacturing. Full article

Plastic waste and pollution is growing rapidly worldwide and most plastics end up in landfill or are incinerated because high-quality recycling is not possible. Plastic-type identification with a low-cost, handheld spectral approach could help in parts of the world where high-end spectral imaging systems on conveyor belts cannot be implemented. Here, we investigate how two fundamentally different handheld infrared spectral devices can identify plastic types by benchmarking the same analysis against a high-resolution bench-top spectral approach. We used the handheld Plastic Scanner, which measures a discrete infrared spectrum using LED illumination at different wavelengths, and the SpectraPod, which has an integrated photonics chip which has varying responsivity in different channels in the near-infrared. We employ machine learning using SVM, XGBoost, Random Forest and Gaussian Naïve Bayes models on a full dataset of plastic samples of PET, HDPE, PVC, LDPE, PP and PS, with samples of varying shape, color and opacity, as measured with three different experimental approaches. The high-resolution spectral approach can obtain an accuracy (mean ± standard deviation) of (0.97 ± 0.01), whereas we obtain (0.93 ± 0.01) for the SpectraPod and (0.70 ± 0.03) for the Plastic Scanner. Differences of reflectance at subsequent wavelengths prove to be the most important features in the plastic-type classification model when using high-resolution spectroscopy, which is not possible with the other two devices. Lower accuracy for the handheld devices is caused by their limitations, as the spectral range of both devices is limited—up to 1600 nm for the SpectraPod, while the Plastic Scanner has limited sensitivity to reflectance at wavelengths of 1100 and 1350 nm, where certain plastic types show characteristic absorbance bands. We suggest that combining selective sensitivity channels (as in the SpectraPod) and illuminating the sample with varying LEDs (as with the Plastic Scanner) could increase the accuracy in plastic-type identification with a handheld device. Full article

Photosynthetic bacteria exhibit significant bioremediation potential and resource recycling characteristics, rendering them valuable candidates for sustainable wastewater treatment applications. Sea cucumber boiling broth (SCBB) contains high concentrations of organic compounds and nutrient salts, whose indiscriminate discharge poses serious environmental risks. This study aimed to evaluate a photosynthetic bacterium capable of effectively treating SCBB, which was isolated from the intertidal sediment samples. The bacterial strain was identified using 16S rDNA sequencing, and optimal growth conditions, including light, pH, and temperature, were determined. Finally, a small-scale trial was conducted in a fed-batch fermenter. The results showed that 16S rDNA analysis placed this strain in the Chromatiaceae family, forming a distinct lineage from the closest related species Marichromatium purpuratum and M. gracile, and was tentatively named Marichromatium sp. DYYC01. The strain exhibited optimal growth under anaerobic conditions at 30 °C, light intensity of 100 μmol photons/m²/s, and pH 7.0. Batch culture experiments demonstrated maximum biomass accumulation (OD₆₆₀ = 0.831) in SCBB medium with an initial COD loading of 3913 mg L⁻¹, concomitant with significant nutrient removal efficiencies: 76.45% COD, 55.82% total nitrogen (TN), and 56.67% total phosphorus (TP). Scaling up to fed-batch fermentation enhanced bioremediation performance, achieving removal rates of 83.13% COD, 72.17% TN, and 73.07% TP with enhanced growth (OD₆₆₀ = 1.2). This study reveals Marichromatium sp. DYYC01’s exceptional halotolerance in high-salinity organic wastewater treatment. The strain’s capacity for simultaneous biomass production and efficient nutrient recovery from hypersaline processing effluent positions it as a promising candidate for developing circular bioeconomy strategies. Full article

This study addresses the global issue of recycling used vehicle tires, typically burned out or trimmed to be reused in playground floors or road banks. In this study, we explore a novel environmentally responsive approach to decomposing and recovering the carbon black particles contained in tires (25–30 wt.%) by vacuum pyrolysis. Given that carbon black is well known for its UV protection in plastics, the objective of this research is to provide an ecological alternative to commercial carbon black of fossil origin by recycling the carbon black (rCB) from used tires. In our research, we create a composite material using rCB and high-density polyethylene (HDPE). In this article, we present the environmental aging studies carried out on this composite material. The topographic evolution of the samples with aging and the oxidation kinetics of the surface and through the thickness were studied. The Beer–Lambert law is used to relate the oxidative index to the characteristic depth of the samples. The UV photons are observed to penetrate up to 54% less with the addition of 6 wt.% of rCB compared to virgin HDPE. In this work, the addition of rCB as filler for HDPE used for outdoor applications has demonstrated to be an antioxidant for UV protection and a good substitute for commercial carbon black for industrial goods. Full article

Encapsulating Cs₄PbBr₆ quantum dots in silicon nano-sheets not only stabilizes the halide perovskite, but also takes advantage of the nano-sheet for a compatible integration with the traditional silicon semiconductor. Here, we report the preparation of un-passivated Cs₄PbBr₆ ellipsoidal nanocrystals and pseudo-spherical quantum dots in silicon nano-sheets and their enhanced photoluminescence (PL). For a sample with low concentrations of quantum dots in silicon nano-sheets, the emission from Cs₄PbBr₆ pseudo-spherical quantum dots is quenched and is dominated with Pb²⁺ ion/silicene emission, which is very stable during the whole measurement period. For a high concentration of Cs₄PbBr₆ ellipsoidal nanocrystals in silicon nano-sheets, we have observed Förster resonance energy transfer with up to 87% efficiency through the oscillation of two PL peaks when UV excitation switches between on and off, using recorded video and PL lifetime measurements. In an area of a non-uniform sample containing both ellipsoidal nanocrystals and pseudo-spherical quantum dots, where Pb²⁺ ion/silicene emissions, broadband emissions from quantum dots, and bandgap edge emissions (515 nm) appear, the 515 nm peak intensity increases five times over 30 min of UV excitation, probably due to a photon recycling effect. This irradiated sample has been stable for one year of ambient storage. Cs₄PbBr₆ quantum dots encapsulated in silicon nano-sheets can lead to applications of halide perovskite light emitting diodes (PeLEDs) and integration with traditional semiconductor materials. Full article

An idealized design of a silicon betavoltaic battery with a tritium source is considered, in which a thin layer of tritiated silicon is sandwiched between two intrinsic silicon slabs of equal width, and the excess charge carriers are collected by thin interdigitated n⁺ and p⁺ electrodes. The opposite sides of the device are covered with a reflecting coating to trap the photons produced in radiative recombination events. Due to photon recycling, radiative recombination is almost ineffective, so the Auger mechanism dominates. An analytical expression for the current–voltage curve is obtained, from which the main characteristics of the cell, namely, the open-circuit voltage, the fill factor, and the betaconversion efficiency, are found. The analytical results are shown to agree with the numerical ones with better than 0.1% accuracy. The optimal half-thickness of this device is found to be around 1.5 μm. The maximal efficiency increases logarithmically with the surface activity of the beta-source and has the representative value of 12.07% at 0.1 mCi/cm² and 14.13% at 10 mCi/cm². Full article

Robust hybrid g-C₃N₄/ZnO-W/Co_x heterojunction composites were synthesized using graphitic carbon nitride (g-C₃N₄) and ZnO-W nanoparticles (NPs) and different concentrations of Co dopant. The hybrid heterojunction composites were prepared by simple and low-cost coprecipitation methods. The fabricated catalyst was explored and investigated using various characterization techniques such as FTIR, XRD, FESEM and EDX. The surface morphology of the as-prepared hybrid nanocomposites with particle sizes in the range of 15–16 nm was validated by SEM analysis. The elemental composition of the synthesized composites was confirmed by EDS analysis. Photocatalysis using a photon as the sole energy source is considered a challenging approach for organic transformations under ambient conditions. The photocatalytic activity of the heterojunctions was tested by photodegrading methylene blue (MB) dye in the presence of sunlight. The reduced band gap of the heterojunction composite of 3.22–2.28 eV revealed that the incorporation of metal ions played an imperative role in modulating the light absorption range for photocatalytic applications. The as-synthesized g-C₃N₄/ZnO-W/Co_0.010 composite suppressed the charge recombination ability during the photocatalytic degradation of methylene blue (MB) dye. The ternary heterojunction C₃N₄/ZnO-W/Co_0.010 composite showed an impressive photocatalytic performance with 90% degradation of MB under visible light within 90 min of irradiation, compared to the outcomes achieved with the other compositions. Lastly, the synthesized composites showed good recyclability and mechanical stability over five cycles, confirming them as promising photocatalyst options in the future. Full article

This study aimed to develop a mortar composite with improved gamma ray shielding properties using WO₃ and Bi₂O₃ nanoparticles, as well as granite residue as a partial replacement of sand. The physical properties and effects of sand substitution and nanoparticle addition on the mortar composite were analyzed. TEM analysis confirmed the size of Bi₂O₃ and WO₃ NPs to be 40 ± 5 nm and 35 ± 2 nm, respectively. SEM images showed that increasing the percentage of granite residues and nanoparticles improved the homogeneity of the mixture and decreased the percentage of voids. TGA analysis indicated that the thermal properties of the material improved with the increase in nanoparticles, without decreasing the material weight at higher temperatures. The linear attenuation coefficients were reported and we found that the LAC value at 0.06 MeV increases by a factor of 2.47 when adding Bi₂O₃, while it is enhanced by a factor of 1.12 at 0.662 MeV. From the LAC data, the incorporation of Bi₂O₃ nanoparticles can greatly affect the LAC at low energies, and still have a small but noticeable effect at higher energies. The addition of Bi₂O₃ nanoparticles into the mortars led to a decrease in the half value layer, resulting in excellent shielding properties against gamma rays. The mean free path of the mortars was found to increase with increasing photon energy, but the addition of Bi₂O₃ led to a decrease in MFP and better attenuation, making the CGN-20 mortar the most ideal in terms of shielding ability among the prepared mortars. Our findings on the improved gamma ray shielding properties of the developed mortar composite have promising implications for radiation shielding applications and granite waste recycling. Full article

Improving mortar shielding properties to preserve environmental and human safety in radiation facilities is essential. Conventional cement mortars, composed of cement, water, and lime aggregate, are crucial for radiation shielding. Using recycled aggregates to produce new mortar and concrete compositions has attracted the attention of several researchers. In the current study, waste marble and iron slag as aggregates are used to create novel cement mortar compositions to study the aggregate’s impact on the radiation attenuation capability of the mortar. Three mortar groups, including a control mortar (CM-Ctrl), were prepared based on cement and waste marble. The other two groups (CM-MIS, CM-NIS), contained 25% iron slag at different particle sizes as a replacement for a waste marble. The study aims to compare iron slag in their micro and nano sizes to discuss the effect of particle size on the mortar radiation capability. For this purpose, the NaI scintillation detector and radioactive point sources (²⁴¹Am, ¹³³Ba, ¹³⁷Cs, ⁶⁰Co, and ¹⁵²Eu) were utilized to measure several shielding parameters, such as the linear attenuation coefficient (LAC), mass attenuation coefficient (MAC), half-value layer (HVL), tenth-value layer (TVL), and mean free path (MFP), for the produced mortars at different photon energies. Furthermore, the transmission electron microscope (TEM) is used to measure the particle size of the aggregates. In addition, a scanning electron microscope (SEM) is utilized to acquire the cross-section morphologies of the prepared mortars. According to our findings, mortars prepared with nano-iron slag and waste marble offered superior shielding capabilities than mortars containing natural sand or fine crushed stone. The nano iron slag mortar can be utilized in place of typical sand mortar for applications as rendering or plastering materials for building medical diagnostic and CT scanner rooms, due to its improved shielding abilities. Full article

Radiation detectors based on Cadmium Zinc Telluride (CZT) compounds are becoming popular solutions thanks to their high detection efficiency, room temperature operation, and to their reliability in compact detection systems for medical, astrophysical, or industrial applications. However, despite a huge effort to improve the technological process, CZT detectors’ full potential has not been completely exploited when both high spatial and energy resolution are required by the application, especially at low energies (<10 keV), limiting their application in energy-resolved photon counting (ERPC) systems. This gap can also be attributed to the lack of dedicated front-end electronics which can bring out the best in terms of detector spectroscopic performances. In this work, we present the latest results achieved in terms of energy resolution using SIRIO, a fast low-noise charge sensitive amplifier, and a linear-array pixel detector, based on boron oxide encapsulated vertical Bridgman-grown B-VB CZT crystals. The detector features a 0.25-mm pitch, a 1-mm thickness and is operated at a −700-V bias voltage. An equivalent noise charge of 39.2 el. r.m.s. (corresponding to 412 eV FWHM) was measured on the test pulser at 32 ns peaking time, leading to a raw resolution of 1.3% (782 eV FWHM) on the 59 keV line at room temperature (+20 °C) using an uncollimated ²⁴¹Am, largely improving the current state of the art for CZT-based detection systems at such short peaking times, and achieving an optimum resolution of 0.97% (576 eV FWHM) at 1 µs peaking time. The measured energy resolution at the 122 keV line and with 1 µs peaking time of a ⁵⁷Co raw uncollimated spectrum is 0.96% (1.17 keV). These activities are in the framework of an Italian collaboration on the development of energy-resolved X-ray scanners for material recycling, medical applications, and non-destructive testing in the food industry. Full article

Nd³⁺-doped LaNbO phosphor thin films were prepared by radio-frequency magnetron sputtering on Si substrates. The effects of a 1% Nd-doping concentration, after annealing at 1200 °C for 12 h, on the light-emitting properties of the sputtered thin films were characterized via several experimental techniques and deeply discussed. Photoluminescence characterization showed strong emission peaks typical of Nd³⁺ centers at 880 nm and 1060 nm when a 325 nm wavelength laser source was applied. Similar responses were detected in Nd3⁺-doped La₃NbO₇ powder samples fabricated by the solid-state reaction method. The coexistence of two phases (LaNbO₄ and La₃NbO₇) in the thin films with higher nominal thickness was clearly identified based on different structural analyses. The promising results open the possibility for developing phosphor substrates as a preliminary step for the improvement of solar cells based on photon recycling mechanisms. Full article

Magnesium silicate nanosheets (MgSiNS) and graphitic carbon nitride (g-C₃N₄) nanocomposites were produced by varying different weight percentages of g-C₃N₄. The obtained nanocomposites were characterized by various techniques such as X-Ray diffraction (XRD), Fourier transformed infrared spectroscopy (FT-IR), diffuse reflectance UV–vis spectroscopy (DR UV–vis), N₂-physisorption, transmission electron microscopy (TEM), and X-ray photon spectroscopy (XPS). The photocatalytic activities of the nanocomposites were measured using visible light irradiation to degrade methylene blue (MB) and Pb²⁺ adsorption in aqueous solution. The ideal physicochemical properties such as porosity, band gap energy, and functional groups in the MgSiNS-GN20 composite (80% MgSiNS and 20 wt % of g-C₃N₄) offered high Pb²⁺ adsorption (0.005 mol/g) and excellent MB degradation efficiency (approximately 93%) at pH 7 within 200 min compared to other composites. In addition, the influences of different reaction parameters such as the effect of pH, the load catalyst, and the concentration of MB and Pb⁺² ions were examined. The obtained results indicate that inexpensive and eco-friendly MgSiNS and g-C₃N₄ composites could be recycled several times, hence representing a promising material to purify water from both organic and inorganic contaminants. Full article

Worldwide, concerns about heavy metal contamination from manmade and natural sources have increased in recent decades. Metals released into the environment threaten human health, mostly due to their integration into the food chain and persistence. Nature offers a large range of materials with different functionalities, providing also a source of inspiration for scientists working in the field of material synthesis. In the current study, a new type of copolymer is introduced, which was synthesized for the first time by combining chitosan and poly(benzofurane-co-arylacetic acid), for use in the adsorption of toxic heavy metals. Such naturally derived materials can be easily and inexpensively synthesized and separated by simple filtration, thus becoming an attractive alternative solution for wastewater treatment. The new copolymer was investigated by solid-state nuclear magnetic resonance, thermogravimetric analysis, scanning electron microscopy, Fourier transform infrared spectroscopy, and X-ray photon electron microscopy. Flame atomic absorption spectrometry was utilized to measure heavy metal concentrations in the investigated samples. Equilibrium isotherms, kinetic 3D models, and artificial neural networks were applied to the experimental data to characterize the adsorption process. Additional adsorption experiments were performed using metal-contaminated water samples collected in two seasons (summer and winter) from two former mining areas in Romania (Roșia Montană and Novăț-Borșa). The results demonstrated high (51–97%) adsorption efficiency for Pb and excellent (95–100%) for Cd, after testing on stock solutions and contaminated water samples. The recyclability study of the copolymer indicated that the removal efficiency decreased to 89% for Pb and 58% for Cd after seven adsorption–desorption cycles. Full article

Reuse, refurbishing, and recycling are the most sustainable options for handling waste materials. However, for municipal solid waste (MSW) that is highly heterogenic, crude, contaminated, and decrepit, thermal conversion in waste-to-energy (WtE) plants is an option. In such plants, the fuel quality of MSW is difficult to predict and the substantial changes expected are challenging for incineration stability. Development of new online sensor technologies for monitoring waste properties prior to incineration is therefore needed. Sensors may contribute to increase WtE process stability, as well as reducing the probability of incineration stops or emissions exceeding legal limits. In this work, the operating principles of potential sensor systems for waste monitoring are categorized and assessed to be implemented for providing parameters for process control or indicators for process alarms in the waste incineration process. For transmissive settings, the use of inductance and hard X-ray sensors are most promising, whereas for reflective settings, utilization of photonic, inductive, soft and hard X-ray, as well as low-frequency radiowave sensors, are most promising. The analytic capacity of single-point measurements with inductance, radiowave, photonic, or X-ray sensors are limited to providing indicators for process alarms, whereas spectral imaging with X-ray or photonic techniques are feasible for providing parameters for both process control and indicators for process alarms. The results obtained in this sensor assessment will be important as a first step in guiding the evolution of monitoring waste properties in the WtE industry to increase repeatability, performance of energy production, and manual labor safety in controlling the waste incineration. Full article