Search Results (359)

The fast-maturing photonic integration technology is calling for a versatile platform that supports both active and passive functions as well as high scalability through component miniaturization. Indium phosphide (InP) has long been recognized for its ability to deliver a comprehensive suite of photonic components. InP membrane technology has emerged as a next-generation solution that could unite the functional completeness with high scalability. This paper describes recent advancements in the InP-membrane-on-Si (IMOS) platform, which supports high-performance passives, polarization and mode handling, native light sources, amplifiers, modulators and detectors, and novel material integration. Full article

In this study, the influence of annealing on the phase evolution and mechanical properties of the Fe₆₂Ni₁₈P₁₃C₇ (at.%) alloy was investigated. Ribbons produced via melt-spinning were annealed at various temperatures, and their structural transformations and hardness were evaluated. The alloy exhibited a narrow supercooled liquid region (ΔT_x ≈ 22 °C), confirming its low glass-forming ability (GFA). Primary crystallization began at approximately 380 °C with the formation of α-(Fe,Ni) and Fe₂NiP, followed by the emergence of γ-(Fe,Ni) phase at higher temperatures. A significant increase in hardness was observed after annealing up to 415 °C, primarily due to nanocrystallization and phosphide precipitation. Further heating resulted in a hardness plateau, followed by a noticeable decline. Additionally, samples were produced via selective laser melting (SLM). The microstructure of the SLM-processed material revealed extensive cracking and the coexistence of phosphorus-rich regions corresponding to Fe₂NiP and iron-rich regions associated with γ-(Fe,Ni). Full article

We report the fabrication of CoFeP-Ni(OH)₂/nickel foam (NF) composite electrodes via a two-step strategy involving the hydrothermal synthesis of Ni(OH)₂ on nickel foam followed by the electrochemical deposition of CoFeP. The integration of the Ni(OH)₂ interlayer not only provides a structurally robust interface but also facilitates synergistic redox activity, thereby significantly boosting the pseudocapacitive behavior of the electrode. Comparative analysis with bare CoFeP/NF reveals that the presence of the Ni(OH)₂ layer contributes to enhanced charge transfer efficiency and an increased electroactive surface area. Among the samples prepared under varying deposition cycles, the optimized CoFeP-Ni(OH)₂/NF electrode exhibits a high areal capacitance of 4244 mF cm⁻² at 2 mA cm⁻². Furthermore, an asymmetric supercapacitor device assembled with CoFeP-Ni(OH)₂/NF as the positive electrode and activated carbon as the negative electrode delivers a maximum energy density of 0.19 mWh cm⁻² at a power density of 0.37 mW cm⁻² and excellent cycling stability, retaining 72% of its initial capacitance after 5000 cycles at a high current density of 8 mA cm⁻². Full article

Phosphine–boranes have garnered growing interest for their potential in catalysis and as building blocks for inorganic polymers. While various synthetic methods exist, flexibility to introduce diverse substituents on the P centers remains limited. Our group reported routes to monoalkylated phosphanylboranes starting from primary phosphanylboranes or sodium phosphide. In this work, we extend these strategies to enable the synthesis of dialkylated phosphanylboranes bearing either identical or different substituents on the P atoms. This expanded methodology provides access to a broader scope of diverse P centers, a key factor influencing the reactivity and applications of phosphine–borane derivatives. Full article

Electrocatalytic urea oxidation reaction (UOR) is a promising dual-purpose approach for hydrogen production and wastewater treatment, addressing critical energy and environmental challenges. However, conventional anode materials often suffer from limited active sites and high charge transfer resistance, restricting UOR efficiency. To overcome these issues, a novel NiP@PNC/NF electrocatalyst was developed via a one-step thermal annealing process under nitrogen, integrating nickel phosphide (NiP) with phosphorus and nitrogen co-doped carbon nanotubes (PNCs) on a nickel foam (NF) substrate. This design enhances catalytic activity and charge transfer, achieving current densities of 50 mA cm⁻² at 1.34 V and 100 mA cm⁻² at 1.43 V versus the reversible hydrogen electrode (RHE). The electrode’s high electrochemical surface area (235 cm²) and double-layer capacitance (94.1 mF) reflect abundant active sites, far surpassing NiP/NF (48 cm², 15.8 mF) and PNC/NF (39.5 cm², 12.9 mF). It maintains exceptional stability, with only a 16.3% performance loss after 35 h, as confirmed by HR-TEM showing an intact nanostructure. Our single-step annealing technique provides simplicity, scalability, and efficient integration of NiP nanoparticles inside a PNC matrix on nickel foam. This method enables consistent distribution and robust substrate adhesion, which are difficult to attain with multi-step or more intricate techniques. Full article

To address mass transport limitations in carbon nanofiber membrane electrodes for overall water splitting, a self-supporting nitrogen-doped hollow carbon nanofiber membrane embedded with Co/Co₂P heterojunctions (Co/Co₂P-NCNFs-H) was fabricated via continuous coaxial electrospinning. The architecture features uniform hollow channels (200–250 nm diameter, 30–50 nm wall thickness) and a high specific surface area (254 m² g⁻¹), as confirmed by SEM, TEM, and BET analysis. The Co/Co₂P heterojunction was uniformly dispersed on nitrogen-doped hollow carbon nanofibers through electrospinning, leverages interfacial electronic synergy to accelerate charge transfer and optimize the hydrogen evolution reaction (HER) and the oxygen evolution reaction (OER). Electrochemical tests demonstrated exceptional catalytic activity, achieving current densities of 100 mA cm⁻² at ultralow overpotentials of 405.6 mV (OER) and 247.9 mV (HER) in 1.0 M KOH—surpassing most reported transition metal catalysts for both half-reactions. Moreover, the electrode exhibited robust long-term stability, maintaining performance for nearly 20 h at 0.6 V (vs. Ag/AgCl) (OER) and over 250 h at −1.5 V (vs. Ag/AgCl) (HER), attributed to the mechanical integrity of the hollow architecture and strong metal–carbon interactions. This work demonstrates that integrating hollow nanostructures (enhanced mass transport) and heterojunction engineering (optimized electronic configurations) creates a scalable strategy for designing efficient bifunctional catalysts, offering significant promise for sustainable hydrogen production via water electrolysis. Full article

Seawater electrolysis offers a sustainable route for large-scale, carbon-neutral hydrogen production, but its industrial application is limited by the poor efficiency and durability of current electrocatalysts under high current densities. Herein, we synthesized ultrasmall Pt nanoclusters uniformly anchored on FeCoNi phosphide nanosheet arrays, forming a composite catalyst with outstanding hydrogen evolution reaction (HER) performance in alkaline seawater. The catalyst achieves an ultralow overpotential of 17 mV at −10 mA cm⁻², far surpassing commercial Pt/C, and stably delivers industrial-level current densities up to 2000 A m⁻² for over 2400 h with minimal voltage degradation and low energy consumption (4.16 kWh/Nm³ H₂). X-ray photoelectron spectroscopy revealed strong interfacial electronic interactions between Pt and Fe/Co species, involving electron transfer from Pt that modulates its electronic structure, weakens hydrogen adsorption, and enhances both HER kinetics and Pt dispersion. This work presents a scalable and robust catalyst platform, bridging the gap between laboratory research and industrial seawater electrolysis for green hydrogen production. Full article

Developing efficient and durable electrocatalysts for the alkaline hydrogen evolution reaction (HER) is crucial for sustainable hydrogen production. Herein, we report a novel RuP₂/Mn₂P₂O₇ heterojunction anchored on a three-dimensional nitrogen and phosphorus co-doped porous carbon (RuP₂/Mn₂P₂O₇/NPC) framework as a high-performance HER catalyst, synthesized via a controlled pyrolysis–phosphidation strategy. The heterostructure achieves uniform dispersion of ultrafine RuP₂/Mn₂P₂O₇ heterojunctions with well-defined interfaces. Furthermore, phosphorus doping restructures the electronic configuration of Mn and Ru species at the RuP₂/Mn₂P₂O₇ heterointerface, enabling enhanced catalytic activity through the accelerated electron transfer and kinetics of the HER. This RuP₂/Mn₂P₂O₇/NPC catalyst exhibits exceptional HER activity with 1 M KOH, requiring only 69 mV of overpotential to deliver 10 mA·cm⁻² and displaying a small Tafel slope of 69 mV·dec⁻¹, rivaling commercial 20% Pt/C. Stability tests reveal negligible activity loss over 48 h, underscoring the robustness of the heterostructure. The RuP₂/Mn₂P₂O₇ heterojunction demonstrates markedly reduced overpotentials for the electrochemical HER process, highlighting its enhanced catalytic efficiency and improved cost-effectiveness compared to the conventional catalytic systems. This work establishes a strategy for designing a transition metal phosphide heterostructure through interfacial electronic modulation, offering broad implications for energy conversion technologies. Full article

Chlorpheniramine maleate (CPM) is a first-generation antihistamine that is frequently used to treat allergic reactions. However, excessive consumption presents potential health risks. Therefore, it is crucial to develop a quick and precise technique for identifying CPM levels. In this study, nickel cobalt phosphide (NiCoP), a binary metal phosphide, was successfully incorporated into carbon nanofibers. This involved creating a pore structure by adding polyvinylpyrrolidone (PVP) as a pore-forming template to a polyacrylonitrile (PAN) substrate via electrostatic spinning. An innovative electrochemiluminescent sensor for CPM detection was constructed using NiCoP/PVP/PAN carbon nanofibers (NiCoP/PVP/PAN/CNFs). Under optimal conditions, the electrochemical behavior of CPM was studied using NiCoP/PVP/PAN/CNF-modified working electrodes. These findings demonstrate that the three-dimensional porous network architecture of NiCoP/PVP/PAN/CNFs enhances the conductive properties of the material. Consequently, an electrochemical optical sensor fabricated using this structure exhibited remarkable performance. The linear detection range of the sensor was 1 × 10⁻⁸–7 × 10⁻⁵ mol/L, and the detection limit was 7.8 × 10⁻¹⁰ mol/L. When human urine and serum samples were examined, the sensor was found to have a high recovery rate (94.35–103.36%), which is promising for practical applications. Full article

In recent years, transition metal-based catalytic materials have garnered considerable attention, particularly those exhibiting high catalytic efficiency toward both the oxygen evolution reaction (OER) and hydrogen evolution reaction (HER). In this work, a self-supporting ternary transition metal phosphide (CoFeNi_0.2P) with a hierarchical structure was synthesized using the Prussian blue analogue (PBA)/zeolitic imidazolate framework-L (ZIF-L) template. Benefiting from the hierarchical structure of the PBA/ZIF-L precursor and the electronic structure modulation induced by Ni doping, the resulting CoFeNi_0.2P demonstrates impressive bifunctional electrocatalytic activity. Specifically, in 1 M KOH electrolyte, the CoFeNi_0.2P catalyst requires an overpotential of only 88 mV to deliver 10 mA cm⁻² for the HER and 248 mV to achieve 50 mA cm⁻² for the OER. Moreover, it demonstrates satisfactory stability toward both the HER and OER. When integrated into a two-electrode electrolyzer, CoFeNi_0.2P enables a current density of 10 mA cm⁻² at a cell voltage of 1.59 V, maintaining robust performance for over 25 h. This study provides a feasible strategy for the rational design of hierarchical electrocatalysts for efficient overall water splitting. Full article

Hydrogen energy holds great promise for alleviating energy and environmental issues, with alkaline electrochemical water splitting being a key approach for hydrogen production. However, the high cost and limited availability of noble-metal catalysts hinder its widespread application. This study presents a novel method to fabricate a NiFeP-CoP/CF electrode. By growing CoOOH nanosheets on Co foam at low temperatures and filling the gaps between nanosheets with Ni and Fe phosphides, the prepared electrode exhibits outstanding electrocatalytic performance. For the oxygen evolution reaction (OER) in alkaline media, it requires overpotentials of only 235 mV and 290 mV to reach current densities of 10 mA cm⁻² and 100 mA cm⁻², respectively. In the case of the hydrogen evolution reaction (HER), overpotentials of 89 mV and 172 mV are needed to achieve current densities of −10 mA cm⁻² and −100 mA cm⁻². The NiFeP-CoP/CF-based electrolytic cell requires a cell voltage of only 1.70 V to achieve a current density of 100 mA cm⁻² for overall water splitting. Moreover, during long-term continuous operation at 100 mA cm⁻², the overpotential for OER remains constant while that for HER decreases. The low-temperature growth of CoOOH nanosheets on Co foam provides a new strategy for large-scale electrode production applicable in electrochemical processes and pollutant degradation. Significantly, filling the nanosheet gaps with phosphides effectively enhances the electrocatalytic performance of the system. This work offers a facile and cost-effective technique for the large-scale production of metallic (oxyhydr)hydroxides for electrocatalytic water splitting, showing great potential for industrial applications. Full article

With the increase of CO₂ emissions caused by human activities, the development of efficient CO₂ reduction technology is crucial to help address the energy crisis and mitigate climate change. In this study, a series of Cu₃P/SnS₂ composites with varying Cu/Sn molar ratios were synthesized using a hydrothermal method to improve the activity and selectivity of the electrocatalytic reduction of CO₂ (CO₂RR). The successful synthesis and structural advantages of the composite were verified via XRD, XPS, SEM, TEM, and BET. Cu₃P/SnS₂-3 (Cu/Sn = 2:1) had the largest specific surface area (78.01 m² g⁻¹) and abundant active sites. The electrochemical performance test showed that in 0.1 M KHCO₃ electrolyte saturated with CO₂, the Faraday efficiency of Cu₃P/SnS₂-3 to CO reached 87% at −1.0 V potential, which was 29 times and 1.78 times higher than that of Cu₃P (3%) and SnS₂ (48.88%). In addition, the catalyst maintained a CO Faraday efficiency of more than 75% in a 5 h stability test. The mechanism study shows that the low Tafel slope, low charge transfer resistance, and high electrochemically active area of the composite significantly promote the CO₂RR kinetics. Full article

Heterogeneous electro-Fenton (HEF) technology utilizing iron-based cathode catalysts has emerged as an efficient advanced oxidation process for wastewater treatment, demonstrating outstanding performance in degrading emerging organic contaminants (EOCs) while maintaining environmental sustainability. The performance of this technology is governed by two critical processes: the accumulation of H₂O₂ and the electron transfer mechanisms governing the Fe(III)/Fe(II) redox cycle. This review comprehensively summarizes recent advances in understanding the electron transfer mechanisms in iron-based HEF systems and their applications for EOC degradation. Five representative catalyst categories are critically analyzed, including zero-valent iron/alloys, iron oxides, iron-carbon/nitrogen-doped carbon composites, iron sulfides/phosphides, and iron-based MOFs, with a particular focus on their structural design, catalytic performance, and electron transfer mechanisms. A particular focus is placed on strategies enhancing Fe(III)/Fe(II) cycling efficiency and the interplay between radical (^•OH) and non-radical (¹O₂) oxidation pathways, including their synergistic effects in complex wastewater systems. Major challenges, including catalyst stability, pH adaptability, and selective oxidation in complex matrices, are further discussed. Potential solutions to these limitations are also discussed. This review provides fundamental insights for designing high-efficiency iron-based HEF catalysts and outlines future research directions to advance practical applications. Full article

Developing efficient bifunctional electrocatalysts with excellent stability at high current densities for overall water splitting is a challenging yet essential objective. However, transition metal phosphides encounter issues such as poor dispersibility, low specific surface area, and limited electronic conductivity, which hinder the achievement of satisfactory performance. Therefore, this study presents the highly efficient bifunctional electrocatalyst of CeO₂-modified NiFe phosphide on nickel foam (CeO₂/Ni₂P/Fe₂P/NF). Ni₂P/Fe₂P coupled with CeO₂ was deposited on nickel foam through hydrothermal synthesis and sequential calcination processes. The electrocatalytic performance of the catalyst was evaluated in an alkaline solution, and it exhibited an HER overpotential of 87 mV at the current density of 10 mA cm⁻² and an OER overpotential of 228 mV at the current density of 150 mA cm⁻². Furthermore, the catalyst demonstrated good stability, with a retention rate of 91.2% for the HER and 97.3% for the OER after 160 h of stability tests. The excellent electrochemical performance can be attributed to the following factors: (1) The interface between Ni₂P/Fe₂P and CeO₂ facilitates electron transfer and reactant adsorption, thereby improving catalytic activity. (2) The three-dimensional porous structure of nickel foam provides an ideal substrate for the uniform distribution of Ni₂P, Fe₂P, and CeO₂ nanoparticles, while its high conductivity facilitates electron transport. (3) The incorporation of larger Ce³⁺ ions in place of smaller Fe³⁺ ions leads to lattice distortion and an increase in defects within the NiFe-layered double hydroxide structure, significantly enhancing its catalytic performance. This research finding offers an effective strategy for the design and synthesis of low-cost, high-potential catalysts for water electrolysis. Full article

Nickel phosphides (Ni_xP_y) are recognized as promising alternatives to noble-metal catalysts for the oxygen evolution reaction (OER). NiP, consisting of the equal stoichiometric ratio of Ni and P, could help quantify the catalytic effect of P and Ni. In this work, density functional theory (DFT) is employed to investigate the OER mechanism on NiP surfaces. We found that P atoms help stabilize O* at the adsorption sites. The rich electron donation from the Ni atom can alter the local charge distribution and enhance the interaction between O* and P atoms. Both oxygen intermediate adsorption energy and OER overpotential exhibit linear correlations with the charge of adsorption sites. Electron loss at the site induces the overall system to exhibit Lewis acidic characteristics, facilitating the OER and leading to a substantial overpotential reduction of up to 0.61 V compared to Lewis basic structures. Leveraging electronic structure theory and Lewis acid–base theory, we offer a new insight into the OER mechanism on the NiP surface, demonstrating that the catalytic activity of bulk metallic surface materials like NiP can be optimized by tailoring the local surface chemical environment. Full article