Search Results (566)

Because artificially cemented granular (ACG) materials employ diverse combinations of aggregates and binders—including cemented soil, low-cement-content cemented sand and gravel (LCSG), and concrete—their stress–strain responses vary widely. In LCSG, the binder dosage is typically limited to 40–80 kg/m³ and the sand–gravel skeleton is often obtained directly from on-site or nearby excavation spoil, endowing the material with a markedly lower embodied carbon footprint and strong alignment with current low-carbon, green-construction objectives. Yet, such heterogeneity makes a single material-specific constitutive model inadequate for predicting the mechanical behavior of other ACG variants, thereby constraining broader applications in dam construction and foundation reinforcement. This study systematically summarizes and analyzes the stress–strain and volumetric strain–axial strain characteristics of ACG materials under conventional triaxial conditions. Generalized hyperbolic and parabolic equations are employed to describe these two families of curves, and closed-form expressions are proposed for key mechanical indices—peak strength, elastic modulus, and shear dilation behavior. Building on generalized plasticity theory, we derive the plastic flow direction vector, loading direction vector, and plastic modulus, and develop a concise, transferable elastoplastic model suitable for the full spectrum of ACG materials. Validation against triaxial data for rock-fill materials, LCSG, and cemented coal–gangue backfill shows that the model reproduces the stress and deformation paths of each material class with high accuracy. Quantitative evaluation of the peak values indicates that the proposed constitutive model predicts peak deviatoric stress with an error of 1.36% and peak volumetric strain with an error of 3.78%. The corresponding coefficients of determination R² between the predicted and measured values are 0.997 for peak stress and 0.987 for peak volumetric strain, demonstrating the excellent engineering accuracy of the proposed model. The results provide a unified theoretical basis for deploying ACG—particularly its low-cement, locally sourced variants—in low-carbon dam construction, foundation rehabilitation, and other sustainable civil engineering projects. Full article

Continuous monitoring of environmental and physiological parameters is essential for early diagnostics, real-time decision making, and intelligent system adaptation. Recent advancements in bio-microelectromechanical systems (BioMEMS) sensors have significantly enhanced our ability to track key metrics in real time. However, continuous monitoring demands sustainable energy supply solutions, especially for on-site energy replenishment in areas with limited resources. Artificial intelligence (AI), particularly large language models, offers new avenues for interpreting the vast amounts of data generated by these sensors. Despite this potential, fully integrated systems that combine self-powered BioMEMS sensing with AI-based analytics remain in the early stages of development. This review first examines the evolution of BioMEMS sensors, focusing on advances in sensing materials, micro/nano-scale architectures, and fabrication techniques that enable high sensitivity, flexibility, and biocompatibility for continuous monitoring applications. We then examine recent advances in energy harvesting technologies, such as piezoelectric nanogenerators, triboelectric nanogenerators and moisture electricity generators, which enable self-powered BioMEMS sensors to operate continuously and reducereliance on traditional batteries. Finally, we discuss the role of AI in BioMEMS sensing, particularly in predictive analytics, to analyze continuous monitoring data, identify patterns, trends, and anomalies, and transform this data into actionable insights. This comprehensive analysis aims to provide a roadmap for future continuous BioMEMS sensing, revealing the potential unlocked by combining materials science, energy harvesting, and artificial intelligence. Full article

Construction and demolition waste (C&D waste) contains various types of substances, which require different processing methods to maximize benefits and minimize harm to realize the goal of the circular economy. Therefore, it is urgent to promote the on-site sorting of C&D waste and explore the determinants of managers’ waste sorting intention. Based on a comprehensive literature review of C&D waste management, seven determinants are identified to explore how antecedent factors influence waste sorting intention by symmetric and asymmetric techniques. Firstly, the partial least squares structural equation modeling (PLS-SEM) was adopted to analyze the data collected from 489 managers to assess the net impact of each determinant on their intentions. Then, the fuzzy-set qualitative comparative analysis (fsQCA) provided another perspective by determining the configurations of the causal conditions that lead to higher or lower levels of intention. The PLS-SEM results reveal that all determinants show a significant positive relationship with the intention except for the perceived risks, which are negatively correlated with managers’ attitudes and intentions regarding C&D waste sorting. Moreover, top management support and subjective norms from other project participants and the public exhibit a huge impact, while the influence of perceived behavioral control (PBC) and policies is moderate. Meanwhile, fsQCA provides a complementary analysis of the complex causality that PLS-SEM fails to capture. That is, fsQCA identified six and five configurations resulting in high and low levels of intention to sort the C&D waste, respectively, and highlighted the crucial role of core conditions. The results provide theoretical and practical insights regarding proper C&D waste management and enhancing sustainable development. Full article

This study examines how a visitor-centered approach enhances engagement, participation, and intangible heritage transmission to support cultural sustainability in ethnographic museums. We conducted online and on-site behavioral observations, questionnaire surveys, and in-depth interviews at the She Ethnic Minority Museum to identify gaps in current visitor experience design. We combined the Analytic Hierarchy Process (AHP) with the Contextual Model of Learning (POE) and Emotional Experience Theory (EET) to develop a hierarchical evaluation model. The model comprises one goal layer, three criterion layers (Experience, Participation, Transmission), and twelve sub-criteria, each evaluated across People, Object, and Environment dimensions. Quantitative weighting revealed that participation exerts the greatest influence, followed by transmission and experience. Findings indicate that targeted interventions promoting active participation most effectively foster emotional resonance and heritage transmission, while strategies supporting intergenerational engagement and immersive experiences also play a significant role. We recommend prioritizing small-scale, low-cost participatory initiatives and integrating online and offline community engagement to establish a participatory chain where engagement leads to meaningful experiences and sustained cultural transmission. These insights offer practical guidance for museum practitioners and policymakers seeking to enhance visitor experiences and ensure the long-term preservation and vibrancy of ethnic minority cultural heritage. Full article

Foodborne pathogenic bacteria critically threaten public health and food industry sustainability, serving as a predominant trigger of food contamination incidents. To mitigate these risks, the development of rapid, sensitive, and highly specific detection technologies is essential for early warning and effective control of foodborne diseases. In recent years, biosensors have gained prominence as a cutting-edge tool for detecting foodborne pathogens, owing to their operational simplicity, rapid response, high sensitivity, and suitability for on-site applications. This review provides a comprehensive evaluation of critical biorecognition elements, such as antibodies, aptamers, nucleic acids, enzymes, cell receptors, molecularly imprinted polymers (MIPs), and bacteriophages. We highlight their design strategies, recent advancements, and pivotal contributions to improving detection specificity and sensitivity. Additionally, we systematically examine mainstream biosensor-based detection technologies, with a focus on three dominant types: electrochemical biosensors, optical biosensors, and piezoelectric biosensors. For each category, we analyze its fundamental principles, structural features, and practical applications in food safety monitoring. Finally, this review identifies future research priorities, including multiplex target detection, enhanced processing of complex samples, commercialization, and scalable deployment of biosensors. These advancements are expected to bridge the gap between laboratory research and real-world food safety surveillance, fostering more robust and practical solutions. Full article

The role of on-site wastewater treatment (OSWT) is increasingly important for water reuse and local sustainability, but treatment efficiency is highly dependent on hydraulic behavior and mixing. This study used validated CFD simulations and tracer experiments to analyze flow patterns and mixing performance in a six-zone OSWT unit under different operational scenarios, including inflow, aeration, recirculation, combined mechanisms, and closed-loop operation without inflow. The results show that influent flow is essential for maintaining convective transport and system-wide momentum, while aeration and recirculation enhance local mixing, but cannot fully overcome geometric dead zones. The combined use of inflow, aeration, and recirculation achieved the highest mixing efficiency and minimized the dead volume, whereas scenarios lacking inflow exhibited severe stagnation and expanded dead zones. These findings highlight the need to integrate hydraulic interventions with thoughtful reactor design to ensure effective and resilient small-scale wastewater treatment systems. Full article

Currently, exploring digital immersive experiences is a new trend in the innovation and development of cultural tourism. This study addresses the growing demand for digital immersion in cultural tourism by examining the integration of spatial narrative and digitally gamified architectural scenarios. This study synthesizes an optimized framework for narrative design in digitally gamified architectural scenarios, integrating spatial narrative theory and feedback-informed design. The proposed model comprises four key components: (1) developing spatial narrative design methods for such scenarios; (2) constructing a spatial language system for spatial narratives using linguistic principles to organize narrative expression; (3) building a preliminary digitally gamified scenario based on the “Wuhu Jiaoji Temple Renovation Project” after architectural and environmental enhancements; and (4) optimization through thermal feedback experiments—collecting visitor trajectory heatmaps, eye-tracking heatmaps, and oculometric data. The results show that the optimized design, validated in the original game Dreams of Jiaoji, effectively enhanced spatial narrative execution by refining both on-site and in-game architectural scenarios. Post-optimization visitor feedback confirmed the validity of the proposed optimization strategies and principles, providing theoretical and practical references for innovative digital cultural tourism models and architectural design advancements. In the context of site-specific architectural conservation, this approach achieves two key objectives: the generalized interpretation of architectural cultural resources and their visual representation through gamified interactions. This paradigm not only enhances public engagement through enabling a multidimensional understanding of historical building cultures but also accelerates the protective reuse of heritage sites, allowing heritage value to be maximized through contemporary reinterpretation. The interdisciplinary methodology promotes sustainable development in the digital transformation of cultural tourism, fostering user-centered experiences and contributing to rural revitalization. Ultimately, this study highlights the potential use of digitally gamified architectural scenarios as transformative tools for heritage preservation, cultural dissemination, and rural community revitalization. Full article

The widespread and persistent occurrence of micropollutants—such as pesticides, pharmaceuticals, heavy metals, personal care products, microplastics, and per- and polyfluoroalkyl substances (PFAS)—has emerged as a critical environmental and public health concern, necessitating the development of highly sensitive, selective, and field-deployable detection technologies. Microfluidic sensors, including biosensors, have gained prominence as versatile and transformative tools for real-time environmental monitoring, enabling precise and rapid detection of trace-level contaminants in complex environmental matrices. Their miniaturized design, low reagent consumption, and compatibility with portable and smartphone-assisted platforms make them particularly suited for on-site applications. Recent breakthroughs in nanomaterials, synthetic recognition elements (e.g., aptamers and molecularly imprinted polymers), and enzyme-free detection strategies have significantly enhanced the performance of these biosensors in terms of sensitivity, specificity, and multiplexing capabilities. Moreover, the integration of artificial intelligence (AI) and machine learning algorithms into microfluidic platforms has opened new frontiers in data analysis, enabling automated signal processing, anomaly detection, and adaptive calibration for improved diagnostic accuracy and reliability. This review presents a comprehensive overview of cutting-edge microfluidic sensor technologies for micropollutant detection, emphasizing fabrication strategies, sensing mechanisms, and their application across diverse pollutant categories. We also address current challenges, such as device robustness, scalability, and potential signal interference, while highlighting emerging solutions including biodegradable substrates, modular integration, and AI-driven interpretive frameworks. Collectively, these innovations underscore the potential of microfluidic sensors to redefine environmental diagnostics and advance sustainable pollution monitoring and management strategies. Full article

Since the early 21st century, urban shrinkage has become a significant global phenomenon. Dongguan, in Guangdong Province, China, is known as a “world factory”. It experienced notable urban shrinkage following the 2008 financial crisis. However, the city demonstrated remarkable recovery and ongoing development in subsequent years. On that basis, this study focuses on the following three points: (1) identifying the spatiotemporal factors contributing to the growth and shrinkage of manufacturing cities, taking Dongguan as an example; (2) explaining the influencing factors of the growth and shrinkage of Dongguan City during three critical periods, 2008–2014 (post-crisis), 2015–2019 (as machinery replaced human work), and 2020–2023 (the COVID-19 pandemic and recovery); and (3) selecting representative towns and streets for on-site observation and investigation, analyzing the measures they have taken to cope with growth and shrinkage during different periods. The key findings include the following: (1) The spatial dynamics of growth and shrinkage in Dongguan show significant temporal patterns, with traditional manufacturing areas shrinking from 2008 to 2014, central urban areas recovering from 2015 to 2019, and renewed shrinkage from 2020 to 2023. However, some regions maintained stability through strategic innovations. (2) Various factors, particularly industrial upgrading and technological innovation, drove the urban dynamics, enhancing economic resilience. (3) The case study of Houjie Town revealed successful adaptive mechanisms supported by policy while facing challenges like labor mismatches and inadequate R&D investment. This research offers insights for improving urban resilience and promoting sustainable development in Dongguan. Full article

Over the past few decades, pesticide application has increased significantly, driven by population growth and associated urbanization. To date, pesticide use remains crucial for sustaining global food security by enhancing crop yields and preserving quality. However, extensive pesticide application raises serious environmental and health concerns worldwide due to its chemical persistence and high toxicity to organisms, including humans. Therefore, there is an urgent need to develop rapid and reliable analytical procedures for the quantification of trace pesticide residues to support public health management. Traditional methods, such as chromatography-based detection techniques, cannot simultaneously achieve high sensitivity, selectivity, cost-effectiveness, and portability, which limits their practical application. Nanomaterial-based sensing techniques are increasingly being adopted due to their rapid, efficient, user-friendly, and on-site detection capabilities. In this review, we summarize recent advances and emerging trends in commonly used nanosensing technologies, such as optical and electrochemical sensing, with a focus on recognition elements including enzymes, antibodies, aptamers, and molecularly imprinted polymers (MIPs). We discuss the types of nanomaterials used, preparation methods, performance, characteristics, advantages and limitations, and applications of these nanosensors in detecting pesticide residues in agricultural products. Furthermore, we highlight current challenges, ongoing efforts, and future directions in the development of pesticide detection nanosensors. Full article

Amid structural changes driven by the greening and digital transformation of the maritime industry, the demand for career transitions of seafarers with onboard experience to shore-based positions—particularly ship superintendents—is steadily increasing. However, the current lack of a systematic education and career development framework to support such transitions poses a critical challenge for shipping companies seeking to secure sustainable human resources. The aim of this study was to develop a competency-based training program that facilitates the effective transition of seafarers to shore-based ship superintendent roles. We integrated a developing a curriculum (DACUM) analysis with competency-based job analysis to achieve this aim. The core competencies required for ship superintendent duties were identified through three expert consultations. In addition, social network analysis (SNA) was used to quantitatively assess the structure and priority of the training content. The analysis revealed that convergent competencies, such as digital technology literacy, responsiveness to environmental regulations, multicultural organizational management, and interpretation of global maritime regulations, are essential for a successful career shift. Based on these findings, a modular training curriculum comprising both common foundational courses and specialized advanced modules tailored to job categories was designed. The proposed curriculum integrated theoretical instruction, practical training, and reflective learning to enhance both applied understanding and onsite implementation capabilities. Furthermore, the concept of a Seafarer Success Support Platform was proposed to support a lifecycle-based career development pathway that enables rotational mobility between sea and shore positions. This digital learning platform was designed to offer personalized success pathways aligned with the career stages and competency needs of maritime personnel. Its cyclical structure, comprising career transition, competency development, field application, and performance evaluation, enables seamless career integration between shipboard- and shore-based roles. Therefore, the platform has the potential to evolve into a practical educational model that integrates training, career development, and policies. This study contributes to maritime human resource development by integrating the DACUM method with a competency-based framework and applying social network analysis (SNA) to quantitatively prioritize training content. It further proposes the Seafarer Success Support Platform as an innovative model to support structured career transitions from shipboard roles to shore-based supervisory positions. Full article

In alignment with the United Nations’ Sustainable Development Goals (SDGs) 12 (Responsible Consumption and Production) and 13 (Climate Action), this research explores the sustainable valorization of mangosteen peels into mangosteen peel powder (MPP), a value-added product with pharmaceutical properties. Mangosteen peels are an abundant agricultural waste in Thailand. This study evaluates six MPP production schemes, each employing different drying methods. Life Cycle Assessment (LCA) is utilized to assess the global warming potential (GWP) of these schemes, and the quality of the MPP produced is also compared. The results show that a combination of frozen storage and freeze-drying (scheme 4) has the highest GWP (1091.897 kgCO₂eq) due to substantial electricity usage, whereas a combination of frozen storage and sun-drying (scheme 5) has the lowest GWP (0.031 kgCO₂eq) but is prone to microbial contamination. Frozen storage without coarse grinding, combined with hot-air drying (scheme 6), is identified as the optimal scheme in terms of GWP (11.236 kgCO₂eq) and product quality. Due to the lack of an onsite hot-air-drying facility, two transportation strategies are integrated into scheme 6 for scenarios A and B. These transportation strategies include transporting mangosteen peels from orchards to a facility in another province or transporting a mobile hot-air-drying unit to the orchards. The analysis indicates that scenario B is more favorable both operationally and environmentally, due to its lower emissions. This research is the first to comparatively assess the GWP of different MPP production schemes using LCA. Furthermore, it aligns with the growing trend in international trade which places greater emphasis on environmentally friendly production processes. Full article

Agricultural greenhouse gas (GHG) emissions contribute significantly to climate change and underline the importance of reliable measurements and mitigation strategies. This life cycle assessment (LCA)-based study evaluates the environmental impacts of four key Mediterranean agricultural products, namely olives, sweet potatoes, corn, and grapes using GHG measurements at four pilot fields located in different regions of Greece. With the use of a cradle-to-gate approach six environmental impact categories, more specifically acidification potential (AP), eutrophication potential (EP), global warming potential (GWP), ozone depletion potential (ODP), photochemical ozone creation potential (POCP), and cumulative energy demand (CED) as energy-based indicator are assessed. The functional unit used is 1 ha of cultivated land. Any potential carbon offsets from mitigation practices are assessed through an integrated low-carbon certification framework and the use of innovative, site-specific technologies. In this context, the present study evaluates three life cycle inventory (LCI)-based scenarios: Baseline (BS), which represents a 3-year crop production period; Field-based (FS), which includes on-site CO₂ and CH₄ measurements to assess the effects of mitigation practices; and Inventoried (IS), which relies on comprehensive datasets. The adoption of carbon mitigation practices under the FS scenario resulted in considerable reductions in environmental impacts for all pilot fields assessed, with average improvements of 8% for olive, 5.7% for sweet potato, 4.5% for corn, and 6.5% for grape production compared to the BS scenario. The uncertainty analysis indicates that among the LCI-based scenarios evaluated, the IS scenario exhibits the lowest variability, with coefficient of variation (CV) values ranging from 0.5% to 7.3%. In contrast, the FS scenario shows slightly higher uncertainty, with CVs reaching up to 15.7% for AP and 14.7% for EP impact categories in corn production. The incorporation of on-site GHG measurements improves the precision of environmental performance and supports the development of site-specific LCI data. This benchmark study has a noticeable transferability potential and contributes to the adoption of sustainable practices in other regions with similar characteristics. Full article

Aflatoxins, toxic secondary metabolites produced primarily by Aspergillus flavus and Aspergillus parasiticus, pose a significant global health concern due to their frequent presence in crops, food, and feed—especially under climate change conditions. This review addresses the growing threat of aflatoxins by analyzing recent advances in detection and mitigation. A comprehensive literature review was conducted, focusing on bioremediation, physical and chemical detoxification, and fungal growth inhibition strategies. The occurrence of aflatoxins in water systems was also examined, along with current detection techniques, removal processes, and regulatory frameworks. Emerging technologies such as molecular diagnostics, immunoassays, biosensors, and chromatographic methods are discussed for their potential to improve monitoring and control. Key findings highlight the increasing efficacy of integrative approaches combining biological and technological solutions and the potential of AI-based tools and portable devices for on-site detection. Intelligent packaging and transgenic crops are also explored for their role in minimizing contamination at the source. Overall, this review emphasizes the importance of continued interdisciplinary research and the development of sustainable, adaptive strategies to mitigate aflatoxin risks, thereby supporting food safety and public health in the face of environmental challenges. Full article

Visitor motivation and experience are essential concepts for both tourism researchers and practitioners. However, there is a structural difference between motivation and experience. How visitor motivation and experience interact and influence visitor satisfaction remains unknown. This study addressed these topics by investigating visitors to Kobe Chinatown, an imitation tourist spot in East Japan. The study collected the answers from 210 online and onsite participants via a structured questionnaire (April–November 2024). The outcomes showed that one motivation factor (interpersonal seeking) was significantly associated with two experience factors (cognitive: β = 0.279, p = 0.003 and affective: β = 0.660, p = 0.000); however, the prior literature review of research on imitation destinations suggested that two other motivation factors (personal escaping and personal seeking) would also be present in the association. In addition, this study also identified that both experience factors significantly predicted visitor satisfaction (cognitive: β = 0.482, p = 0.000 and affective: β = 0.340, p = 0.005) while motivation did not. The issue with the conceptualization of motivation and the essentiality of experience was discussed based on these observations. Implications for sustaining and promoting imitation destinations were also generated. Full article