Search Results (196)

The enhanced Loran (eLoran) system, a critical terrestrial backup for the Global Satellite Navigation System (GNSS), traditionally utilizes a Reed-Solomon (RS) code for its data communication, which presents limitations in error performance, particularly due to its decoding method. This paper introduces a significant advancement by proposing the replacement of the conventional RS code with a 128-ary polar code, which is designed to maintain compatibility with the established 128-ary Pulse Position Modulation (PPM) scheme integral to eLoran’s positioning function. A Soft–Soft (SS) demodulation method, based on a correlation receiver, is developed to provide the requisite soft information for the effective Successive Cancellation List (SCL) decoding of the 128-ary polar code. Comprehensive simulations demonstrate that the proposed 128-ary polar code with SS demodulation achieves a substantial error performance improvement, yielding an approximate 9.3 dB gain at the 0.01 FER level over the RS code in eLoran data communication with EPD-MD demodulation. Additionally, the proposed scheme improves data transmission efficiency—either reducing transmission duration by 2/3 or increasing message bit number by 250% for comparable error performance—without impacting the system’s primary positioning capabilities. Full article

The updated MODIS Collection 6.1 (C6.1) Dark Target (DT) aerosol optical depth (AOD) is extensively utilized in aerosol-climate studies in China. Nevertheless, the long-term accuracy of this data remains under-evaluated, especially for the forested areas. This study was undertaken to substantiate the accuracy of MODIS Terra (MOD04) and Aqua (MYD04) at 3 km resolution AOD retrievals at six forested sites in China from 2004 to 2022. The results revealed that MODIS C6.1 DT MOD04 and MYD04 datasets display good correlation (R = 0.75), low RMSE (0.20, 0.18), but significant underestimation, with only 53.57% (Terra) and 52.20% (Aqua) of retrievals within expected error (EE). Both the Terra and Aqua struggled in complex terrain (Gongga Mt.) and high aerosol loads (AOD > 1). In northern sites, MOD04 outperformed MYD04 with better correlation and a relatively high number of retrievals percentage within EE. In contrast, MYD04 outperformed MOD04 in central region with better R (0.69 vs. 0.62), and high percentage within EE (68.70% vs. 63.62%). Since both products perform well in the central region, MODIS C6.1 DT products are recommended for this region. In southern sites, MOD04 product performs relatively better than MYD04 with a marginally higher percentage within EE. However, MYD04 shows better correlation, although a higher number of retrievals fall below EE compared to MOD04. Seasonal biases, driven by snow and dust, were pronounced at northern sites during winter and spring. Southern sites faced issues during biomass burning seasons and complex terrain further degraded accuracy. MOD04 demonstrated a marginally superior performance compared to MYD04, yet both failed to achieve the global validation benchmark (66% within). The proposed results highlight critical limitations of current aerosol retrieval algorithms in forest and mountainous landscapes, necessitating methodological refinements to improve satellite-based derived AOD accuracy in ecological sensitive areas. Full article

Current land surface temperature (LST) products, estimated by sensors on board satellites, show a trade-off between their spatial and temporal resolution. If the spatial resolution is high (i.e., around 100 m), the LST product is delivered every 2 weeks, and for those LST products estimated daily, its spatial resolution is 1 km. Current spatial and temporal resolutions are not adequate for disciplines such as high-precision agriculture, urban decision making, and planning how to mitigate the overheating of cities, for which LST maps at 50–100 m resolution every few days are desirable. This situation has led to the development of disaggregation techniques in order to enhance the spatial resolution of daily LST products. Unfortunately, disaggregation techniques are usually complex since they rely on a number of external inputs and computer resources and are difficult to apply in practice. To our knowledge, there are only two operative downscaled 10 m LST products available to the end user, which are implemented in the Google Earth Engine (GEE) tool. They are the Daily Ten-ST-GEE and LST-downscaling-GEE systems. This study provides a critical benchmark by performing the first direct intercomparison and rigorous in situ validation of these two operative GEE systems. The validation, conducted with reference temperature data from dedicated field campaigns over contrasting agricultural sites in Spain, showed a good correlation of both methods with a R² of 0.74 for Daily Ten-ST-GEE and 0.94 for LST-downscaling-GEE, but the poor results of the first method in a highly heterogeneous site (RMSE of 5.8 K) make the second method the most suitable (RMSE of 3.6 K) for obtaining high-spatiotemporal-resolution LST maps. Full article

The Moon has become the focus of renewed interest for numerous space agencies and private companies worldwide. In the coming years, various scientific and commercial missions are planned, with a particular emphasis on exploring the South Pole. These missions include orbiters, landers, as well as both static and mobile rovers. For all these operations, continuous and accurate position knowledge is essential. This paper evaluates the performance of a navigation system designed for a lunar rover using the future satellite navigation infrastructure. It highlights the critical role of integrating multiple information sources, including a Digital Elevation Model (DEM) of the lunar surface and a high-precision Inertial Measurement Unit (IMU). The results demonstrate that a comprehensive suite of instruments enables highly accurate and reliable navigation for a mobile rover. While standalone satellite navigation, due to the reduced number of available sources, offers navigation accuracy of the orders of tens of meters, the addition of the DEM lowers the error at 5 m level; the IMU further improve by roughly 40% the performance on horizontal positioning. Full article

Climate change monitoring and analysis is a critical task that involves the consideration of both spatial and temporal dimensions. Theimproved spatial distribution of the global navigation satellite system (GNSS) ground-based Continuous Operating Reference (COR) stations can lead to enhanced results when coupled with a continuous flow of data over time. In Africa, a significant number of COR stations do not operate continuously and lack collocation with meteorological sensors essential for climate studies. Consequently, Africa faces challenges related to inadequate spatial distribution and temporal data flow from GNSS ground-based stations, impacting climate change monitoring and analysis. This research delves into the pattern of GNSS radio occultation (RO) data across Africa, addressing the limitations of the GNSS ground-based data for climate change research. The spatial analysis employed Ripley’s F-, G-, K-, and L-functions, along with calculations of nearest neighbour and Kernel density. The analysis yielded a Moran’s p-value of 0.001 and a Moran’s I-value approaching 1.0. For temporal analysis, the study investigated the data availability period of selected GNSS RO missions. Additionally, it examined seasonal temperature variations from May 2001 to May 2023, showcasing alignment with findings from other researchers worldwide. Hence, this study suggests the utilisation of GNSS RO missions/campaigns like METOP and COSMIC owing to their superior spatial and temporal resolution. Full article

The escalation in the population of livestock coupled with inadequate precipitation has caused a reduction in pasture biomass, thereby resulting in diminished grassland carrying capacity (GCC) and pasture degradation. In this research, net primary productivity (NPP) data, sourced from the Global Land Surface Satellite (GLASS) and Moderate Resolution Imaging Spectroradiometer (MODIS) datasets from 1982 to 2020, were initially transformed into aboveground biomass (AGB) estimates. These estimates were subsequently utilized to evaluate and assess the long-term trends of GCC across Mongolia. The MODIS data indicated an upward trend in AGB from 2000 to 2020, whereas the GLASS data reflected a downward trend from 1982 to 2018. Between 1982 and 2020, climatic analysis uncovered robust positive correlations between AGB and precipitation (R > 0.80) and negative correlations with temperature (R < −0.60). These climatic alterations have led to a reduction in AGB, further impairing the regenerative capacity of grasslands. Concurrently, livestock numbers have generally increased since 1982, with a decrease in certain years due to dzud and summer drought, leading to the increase in the GCC. GCC assessment found that 37.5% of grasslands experienced severe overgrazing and 31.9–40.7% was within sustainable limits. Spatially, the eastern region of Mongolia could sustainably support current livestock numbers; the western and southern regions, as well as parts of northern Mongolia, have exhibited moderate to critical levels of grassland utilization. A detailed analysis of GCC dynamics and its climatic impacts would offer scientific support for policymakers in managing grasslands in the Mongolian Plateau. Full article

Copper is typically acknowledged as a critical mineral and one of the vital components of various of today’s fast-growing green technologies. Porphyry copper systems, which are an important source of copper and molybdenum, typically consist of large volumes of hydrothermally altered rocks, mainly around porphyry copper intrusions. Mapping hydrothermal alteration zones associated with porphyry copper systems is one of the most important indicators for copper exploration, especially using advanced satellite remote sensing technology. This paper presents a sophisticated remote sensing-based method that uses ASTER satellite imagery (SWIR bands 4 to 9) to identify hydrothermal alteration zones by combining the discrete wavelet transform (DWT) and the median absolute deviation (MAD) algorithms. All six SWIR bands (bands 4–9) were analyzed independently, and band 9, which showed the most consistent spatial patterns and highest validation accuracy, was selected for final visualization and interpretation. The MAD algorithm is effective in identifying spectral anomalies, and the DWT enables the extraction of features at different scales. The Urmia–Dokhtar magmatic arc in central Iran, which hosts the Zafarghand porphyry copper deposit, was selected as a case study. It is a hydrothermal porphyry copper system with complex alteration patterns that make it a challenging target for copper exploration. After applying atmospheric corrections and normalizing the data, a hybrid algorithm was implemented to classify the alteration zones. The developed classification framework achieved an accuracy of 94.96% for phyllic alteration and 89.65% for propylitic alteration. The combination of MAD and DWT reduced the number of false positives while maintaining high sensitivity. This study demonstrates the high potential of the proposed method as an accurate and generalizable tool for copper exploration, especially in complex and inaccessible geological areas. The proposed framework is also transferable to other porphyry systems worldwide. Full article

Flood hazards and their disastrous consequences disrupt economic activity and threaten human lives globally. From a remote sensing perspective, since floods are often triggered by extreme climatic events, such as heavy rainstorms or tropical cyclones, the efficacy of using optical remote sensing data for disaster and damage mapping is significantly compromised. In many flood events, obtaining cloud-free images covering the affected area remains challenging. Nonetheless, considering that floods are the most frequent type of natural disaster on Earth, optical remote sensing data should be fully exploited. In this article, firstly, we will present a critical review of remote sensing data and machine learning methods for global flood-induced damage detection and mapping. We will primarily consider two types of remote sensing data: moderate-resolution multi-spectral data and high-resolution true-color or panchromatic data. Big and semantic databases available for advanced machine learning to date will be introduced. We will develop a set of best-use case scenarios for using these two data types to conduct water-body and built-up area mapping with no to moderate cloud coverage. We will cross-verify traditional machine learning and current deep learning methods and provide both benchmark databases and algorithms for the research community. Last, with this suite of data and algorithms, we will demonstrate the development of a cloud-computing-supported computing gateway, which houses the services of both our remote-sensing-based machine learning engine and a web-based user interface. Under this gateway, optical satellite data will be retrieved based on a global flood alerting system. Near-real-time pre- and post-event flood analytics are then showcased for end-user decision-making, providing insights such as the extent of severely flooded areas, an estimated number of affected buildings, and spatial trends of damage. In summary, this paper’s novel contributions include (1) a critical synthesis of operational readiness in flood mapping, (2) a multi-sensor-aware review of optical limitations, (3) the deployment of a lightweight ML pipeline for near-real-time mapping, and (4) a proposal of the GloFIM platform for field-level disaster support. Full article

As sensor technology integrates into modern life, diverse sensing devices have become essential for collecting critical data that enables human–machine interfaces such as autonomous vehicles and healthcare monitoring systems. However, the growing number of sensor devices places significant demands on network capacity, which is constrained by the limitations of radio frequency (RF) technology. RF-based communication faces challenges such as bandwidth congestion and interference in densely populated areas. To overcome these challenges, a combination of RF with free-space optical (FSO) communication is presented. FSO is a laser-based wireless solution that offers high data rates and secure communication, similar to fiber optics but without the need for physical cables. However, FSO is highly susceptible to atmospheric turbulence and conditions such as fog and smoke, which can degrade performance. By combining the strengths of both RF and FSO, a hybrid FSO/RF system can enhance network reliability, ensuring seamless communication in dynamic urban environments. This review examines hybrid FSO/RF systems, covering both theoretical models and real-world applications. Three categories of hybrid systems, namely hard switching, soft switching, and relay-based mechanisms, are proposed, with graphical models provided to improve understanding. In addition, multi-platform applications, including autonomous, unmanned aerial vehicles (UAVs), high-altitude platforms (HAPs), and satellites, are presented. Finally, the paper identifies key challenges and outlines future research directions for hybrid communication networks. Full article

The Global Navigation Satellite System (GNSS) has emerged as a critical spatiotemporal infrastructure for ensuring the integrity of remote sensing data links. However, traditional GNSS antenna arrays, typically configured with the antenna spacing of half a wavelength, are constrained by the spatial limitations of remote sensing platforms. This limitation results in a restricted number of interference-resistant antennas, posing a risk of failure in scenarios involving distributed multi-source interference. To address this challenge, this paper focuses on the multidimensional trade-off problem in the design of compact GNSS anti-interference arrays under finite spatial constraints. For the first time, we systematically reveal the intrinsic relationships and game-theoretic mechanisms among key parameters, including the number of antennas, antenna spacing, antenna size, null width, coupling effects, and receiver availability. First, we propose a novel null width analysis method based on the steering vector correlation coefficient (SVCC), elucidating the inverse regulatory mechanism between increasing the number of antennas and reducing antenna spacing on null width. Furthermore, we demonstrate that increasing antenna size enhances the signal-to-noise ratio (SNR) while also introducing trade-offs with mutual coupling losses, which degrade SNR after compensation. Building on these insights, we innovatively propose a multi-objective optimization framework based on the non-dominated sorting genetic algorithm-II (NSGA-II) model, integrating antenna electromagnetic characteristics and signal processing constraints. Through iterative generation of the Pareto front, this framework achieves a globally optimal solution that balances spatial efficiency and anti-interference performance. Experimental results show that, under a platform constraint of 1 wavelength × 1 wavelength, the optimal number of antennas ranges from 15 to 17, corresponding to receiver availability rates of 89%, 72%, and 55%, respectively. Full article

The lithium-ion battery equalization system is a critical component in Low-Earth Orbit (LEO) satellite power supply systems, ensuring the consistency of battery cells, maximizing the utilization of battery pack capacity, and enhancing battery reliability and cycle life. In DC bus satellite power systems, passive equalization technology is widely adopted due to its simple structure and ease of control. However, passive equalization suffers from drawbacks such as complex thermal design and limited operation primarily during battery charging. These limitations can lead to inconsistent control over the depth of discharge of individual battery cells, ultimately affecting the overall lifespan of the battery pack. In contrast, active equalization technology offers higher efficiency, faster equalization speeds, and the ability to utilize digital control methods, making it the mainstream direction for the development of lithium-ion battery equalization technology. Nevertheless, active equalization often requires a large number of switches and energy storage components, involves complex control algorithms, and faces challenges such as large size and reduced reliability. Most existing active equalization techniques are not directly applicable to DC bus satellite power systems. In this study, based on the operational characteristics of LEO satellite power storage batteries, an active–passive hybrid equalization topology utilizing a switching matrix is proposed. This topology combines the advantages of a simple structure, ease of control, and high reliability. Its feasibility has been validated through experimental results. Full article

Efficient data transmission in low Earth orbit (LEO) satellite networks is critical for supporting real-time global communication, Earth observation, and numerous data-intensive space missions. A fundamental challenge in these networks involves solving the maximum flow problem, which determines the optimal data throughput across highly dynamic topologies with limited onboard energy and data processing capability. Traditional algorithms often fall short in these environments due to their high computational costs and inability to adapt to frequent topological changes or fluctuating link capacities. This paper introduces an accelerated maximum flow algorithm specifically designed for dynamic LEO networks, leveraging a prediction-enhanced approach to improve both speed and adaptability. The proposed algorithm integrates a novel energy-time expanded graph (e-TEG) framework, which jointly models satellite-specific constraints including time-varying inter-satellite visibility, limited onboard processing capacities, and dynamic link capacities. In addition, a learning-augmented warm-start strategy is introduced to enhance the Ford–Fulkerson algorithm. It generates near-optimal initial flows based on historical network states, which reduces the number of augmentation steps required and accelerates computation under dynamic conditions. Theoretical analyses confirm the correctness and time efficiency of the proposed approach. Evaluation results validate that the prediction-enhanced approach achieves up to a 32.2% reduction in computation time compared to conventional methods, particularly under varying storage capacity and network topologies. These results demonstrate the algorithm’s potential to support high-throughput, efficient data transmission in future satellite communication systems. Full article

Cloud detection is a crucial task in satellite remote sensing, influencing applications such as vegetation indices, land use analysis, and renewable energy estimation. This study evaluates the performance of cloud masks generated for KOMPSAT-3 and KOMPSAT-3A imagery using the DeepLabV3+ deep learning model with a ResNet-101 backbone. To overcome the limitations of digital number (DN) data, Top-of-Atmosphere (TOA) reflectance was computed and used for model training. Comparative analysis between the DN and TOA reflectance demonstrated significant improvements with the TOA correction applied. The TOA reflectance combined with the NDVI channel achieved the highest precision (69.33%) and F1-score (59.27%), along with a mean Intersection over Union (mIoU) of 46.5%, outperforming all the other configurations. In particular, this combination was highly effective in detecting dense clouds, achieving an mIoU of 48.12%, while the Near-Infrared, green, and red (NGR) combination performed best in identifying cloud shadows with an mIoU of 23.32%. These findings highlight the critical role of radiometric correction and optimal channel selection in enhancing deep learning-based cloud detection. This study demonstrates the crucial role of radiometric correction, optimal channel selection, and the integration of additional synthetic indices in enhancing deep learning-based cloud detection performance, providing a foundation for the development of more refined cloud masking techniques in the future. Full article

Ground-based global navigation satellite system (GNSS) and remote sensing interferometric synthetic aperture radar (InSAR) techniques have proven to be very useful for deformation monitoring. GNSS provides high-precision data but only at a limited number of points, whereas InSAR allows for a much denser distribution of measurement points, though only in areas with high and consistent signal backscattering. This study aims to integrate these two techniques to overcome their respective limitations and explore their potential for effective monitoring of critical infrastructure, ensuring the protection of people and the environment. The proposed approach was applied to monitor deformations of the shoulder structures of the MOSE (MOdulo Sperimentale Elettromeccanico) system, the civil infrastructure designed to protect Venice and its lagoon from high tides. GNSS data were collected from 36 continuous GNSS (CGNSS) stations located at the corners of the emerged shoulder structures in the Treporti, San Nicolò, Malamocco, and Chioggia barriers. Velocities from February 2021/November 2022 to June 2023 were obtained using daily RINEX data and Bernese software. Three different processing strategies were applied, utilizing networks composed of the 36 MOSE stations and eight other continuous GNSS stations from the surrounding area (Padova, Venezia, Treviso, San Donà, Rovigo, Taglio di Po, Porto Garibaldi, and Porec). InSAR data were sourced from the European ground motion service (EGMS) of the Copernicus program and the Veneto Region database. Both services provide open data related to the line of sight (LOS) velocities derived from Sentinel-1 satellite imagery using the persistent scatterers interferometric synthetic aperture radar (PS-InSAR) approach. InSAR velocities were calibrated using a reference CGNSS station (Venezia) and validated with the available CGNSS data from the external network. Subsequently, the velocities were compared along the LOS at the 36 CGNSS stations of the MOSE system. The results showed a strong agreement between the velocities, with approximately 70% of the comparisons displaying differences of less than 1.5 mm/year. These findings highlight the great potential of satellite-based monitoring and the effectiveness of combining GNSS and InSAR techniques for infrastructure deformation analysis. Full article

With the rapid increase in the number of Earth Observation Satellites (EOSs), research on autonomous mission scheduling has become increasingly critical for optimizing satellite sensor operations. While most existing studies focus on static environments or initial planning states, few address the challenge of dynamic request replanning for real-time sensor management. In this paper, we tackle the problem of multi-satellite rapid mission replanning under dynamic batch-arrival observation requests. The objective is to maximize overall observation revenue while minimizing disruptions to the original scheme. We propose a framework that integrates stochastic master-satellite mission allocation with single-satellite replanning, supported by reactive scheduling policies trained via deep reinforcement learning. Our approach leverages mission sequence modeling with attention mechanisms and time-attitude-aware rotary positional encoding to guide replanning. Additionally, scalable embeddings are employed to handle varying volumes of dynamic requests. The mission allocation phase efficiently generates assignment solutions using a pointer network, while the replanning phase introduces a hybrid action space for direct task insertion. Both phases are formulated as Markov Decision Processes (MDPs) and optimized using the PPO algorithm. Extensive simulations demonstrate that our method significantly outperforms state-of-the-art approaches, achieving a 15.27% higher request insertion revenue rate and a 3.05% improvement in overall mission revenue rate, while maintaining a 1.17% lower modification rate and achieving faster computational speeds. This demonstrates the effectiveness of our approach in real-world satellite sensor applications. Full article