Search Results (9)

The cyber–physical integrated power distribution system is poised to become the predominant trend in the development of future power systems. Although the highly intelligent panoramic link information system in substations facilitates the efficient, cost-effective, and secure operation of the power system, it is also exposed to dual threats from both internal and external factors. Under intentional cyber information attacks, the operational data and equipment response capabilities of the panoramic link information system within smart substations can be illicitly manipulated, thereby disrupting dispatcher response decision-making and resulting in substantial losses. To tackle this challenge, this paper delves into the research on automatic verification and active defense mechanisms for the cyber–physical power distribution system under panoramic link attacks in smart substations. Initially, to mitigate internal risks stemming from the uncertainty of new energy output information, this paper utilizes a CGAN-IK-means model to generate representative scenarios. For scenarios involving external intentional cyber information attacks, this paper devises a fixed–flexible adjustment resource response strategy, making up for the shortfall in equipment response capabilities under information attacks through flexibility resource regulation. The proposed strategy is assessed based on two metrics, voltage level and load shedding volume, and computational efficiency is optimized through an enhanced firefly algorithm. Ultimately, the efficacy and viability of the proposed method are verified and demonstrated using a modified IEEE standard test system. Full article

Leveraging mid-resolution satellite images such as Landsat 8 for accurate farmland segmentation and land change monitoring is crucial for agricultural management, yet is hindered by the scarcity of labelled data for the training of supervised deep learning pipelines. The particular focus of this study is on addressing the scarcity of labelled images. This paper introduces several contributions, including a systematic satellite image data augmentation approach that aims to maintain data population consistency during model training, thus mitigating performance degradation. To alleviate the labour-intensive task of pixel-wise image labelling, we present a novel application of a modified conditional generative adversarial network (CGAN) to generate artificial satellite images and corresponding farm labels. Additionally, we scrutinize the role of spectral bands in satellite image segmentation and compare two prominent semantic segmentation models, U-Net and DeepLabV3+, with diverse backbone structures. Our empirical findings demonstrate that augmenting the dataset with up to 22.85% artificial samples significantly enhances the model performance. Notably, the U-Net model, employing standard convolution, outperforms the DeepLabV3+ models with atrous convolution, achieving a segmentation accuracy of 86.92% on the test data. Full article

This study investigates the effectiveness of using conditional generative adversarial networks (CGAN) to synthesize Optical Coherence Tomography (OCT) images for medical diagnosis. Specifically, the CGAN model is trained to generate images representing various eye conditions, including normal retina, vitreous warts (DRUSEN), choroidal neovascularization (CNV), and diabetic macular edema (DME), creating a dataset of 102,400 synthetic images per condition. The quality of these images is evaluated using two methods. First, 18 transfer-learning neural networks (including AlexNet, VGGNet16, GoogleNet) assess image quality through model-scoring metrics, resulting in an accuracy rate of 97.4% to 99.9% and an F1 Score of 95.3% to 100% across conditions. Second, interpretative analysis techniques (GRAD-CAM, occlusion sensitivity, LIME) compare the decision score distribution of real and synthetic images, further validating the CGAN network’s performance. The results indicate that CGAN-generated OCT images closely resemble real images and could significantly contribute to medical datasets. Full article

In recent years, disease attacks have posed continuous threats to agriculture and caused substantial losses in the economy. Thus, early detection and classification could minimize the spread of disease and help to improve yield. Meanwhile, deep learning has emerged as the significant approach to detecting and classifying images. The classification performed using the deep learning approach mainly relies on large datasets to prevent overfitting problems. The Automatic Segmentation and Hyper Parameter Optimization Artificial Rabbits Algorithm (AS-HPOARA) is developed to overcome the above-stated issues. It aims to improve plant leaf disease classification. The Plant Village dataset is used to assess the proposed AS-HPOARA approach. Z-score normalization is performed to normalize the images using the dataset’s mean and standard deviation. Three augmentation techniques are used in this work to balance the training images: rotation, scaling, and translation. Before classification, image augmentation reduces overfitting problems and improves the classification accuracy. Modified UNet employs a more significant number of fully connected layers to better represent deeply buried characteristics; it is considered for segmentation. To convert the images from one domain to another in a paired manner, the classification is performed by HPO-based ARA, where the training data get increased and the statistical bias is eliminated to improve the classification accuracy. The model complexity is minimized by tuning the hyperparameters that reduce the overfitting issue. Accuracy, precision, recall, and F1 score are utilized to analyze AS-HPOARA’s performance. Compared to the existing CGAN-DenseNet121 and RAHC_GAN, the reported results show that the accuracy of AS-HPOARA for ten classes is high at 99.7%. Full article

A new image reconstruction (IR) algorithm from multiscale interest points in the discrete wavelet transform (DWT) domain was proposed based on a modified conditional generative adversarial network (CGAN). The proposed IR-DWT-CGAN model generally integrated a DWT module, an interest point extraction module, an inverse DWT module, and a CGAN. First, the image was transformed using the DWT to provide multi-resolution wavelet analysis. Then, the multiscale maxima points were treated as interest points and extracted in the DWT domain. The generator was a U-net structure to reconstruct the original image from a very coarse version of the image obtained from the inverse DWT of the interest points. The discriminator network was a fully convolutional network, which was used to distinguish the restored image from the real one. The experimental results on three public datasets showed that the proposed IR-DWT-CGAN model had an average increase of 2.9% in the mean structural similarity, an average decrease of 39.6% in the relative dimensionless global error in synthesis, and an average decrease of 48% in the root-mean-square error compared with several other state-of-the-art methods. Therefore, the proposed IR-DWT-CGAN model is feasible and effective for image reconstruction with multiscale interest points. Full article

Bearings are vital components of rotating machines that are prone to unexpected faults. Therefore, bearing fault diagnosis and condition monitoring are essential for reducing operational costs and downtime in numerous industries. In various production conditions, bearings can be operated under a range of loads and speeds, which causes different vibration patterns associated with each fault type. Normal data are ample as systems usually work in desired conditions. On the other hand, fault data are rare, and in many conditions, there are no data recorded for the fault classes. Accessing fault data is crucial for developing data-driven fault diagnosis tools that can improve both the performance and safety of operations. To this end, a novel algorithm based on conditional generative adversarial networks (CGANs) was introduced. Trained on the normal and fault data on actual fault conditions, this algorithm generates fault data from normal data of target conditions. The proposed method was validated on a real-world bearing dataset, and fault data were generated for different conditions. Several state-of-the-art classifiers and visualization models were implemented to evaluate the quality of the synthesized data. The results demonstrate the efficacy of the proposed algorithm. Full article

Target recognition in synthetic aperture radar (SAR) imagery suffers from speckle noise and geometric distortion brought by the range-based coherent imaging mechanism. A new SAR target recognition system is proposed, using a SAR-to-optical translation network as pre-processing to enhance both automatic and manual target recognition. In the system, SAR images of targets are translated into optical by a modified conditional generative adversarial network (cGAN) whose generator with a symmetric architecture and inhomogeneous convolution kernels is designed to reduce the background clutter and edge blur of the output. After the translation, a typical convolutional neural network (CNN) classifier is exploited to recognize the target types in translated optical images automatically. For training and testing the system, a new multi-view SAR-optical dataset of aircraft targets is created. Evaluations of the translation results based on human vision and image quality assessment (IQA) methods verify the improvement of image interpretability and quality, and translated images obtain higher average accuracy than original SAR data in manual and CNN classification experiments. The good expansibility and robustness of the system shown in extending experiments indicate the promising potential for practical applications of SAR target recognition. Full article

In recent years, the interpretation of SAR images has been significantly improved with the development of deep learning technology, and using conditional generative adversarial nets (CGANs) for SAR-to-optical transformation, also known as image translation, has become popular. Most of the existing image translation methods based on conditional generative adversarial nets are modified based on CycleGAN and pix2pix, focusing on style transformation in practice. In addition, SAR images and optical images are characterized by heterogeneous features and large spectral differences, leading to problems such as incomplete image details and spectral distortion in the heterogeneous transformation of SAR images in urban or semiurban areas and with complex terrain. Aiming to solve the problems of SAR-to-optical transformation, Serial GANs, a feature-preserving heterogeneous remote sensing image transformation model, is proposed in this paper for the first time. This model uses the Serial Despeckling GAN and Colorization GAN to complete the SAR-to-optical transformation. Despeckling GAN transforms the SAR images into optical gray images, retaining the texture details and semantic information. Colorization GAN transforms the optical gray images obtained in the first step into optical color images and keeps the structural features unchanged. The model proposed in this paper provides a new idea for heterogeneous image transformation. Through decoupling network design, structural detail information and spectral information are relatively independent in the process of heterogeneous transformation, thereby enhancing the detail information of the generated optical images and reducing its spectral distortion. Using SEN-2 satellite images as the reference, this paper compares the degree of similarity between the images generated by different models and the reference, and the results revealed that the proposed model has obvious advantages in feature reconstruction and the economical volume of the parameters. It also showed that Serial GANs have great potential in decoupling image transformation. Full article

In this paper, we demonstrate the direct epitaxial growth of c-plane GaN on a preheated (−2 0 1) β-Ga₂O₃ single-crystal substrate with no interlayer or pre-patterning processes by using the atmospheric pressure metalorganic chemical vapor deposition method. The results show that high-temperature preheating (>500 °C) can modify the surface morphology of the substrate so that the crystalline quality of the grown GaN layer can be improved. With higher preheated temperatures, the grown GaN layer reveals smaller FWHM (full width at half-maximum) of the X-ray rocking curve. In addition, we find that the photoluminescence spectra of the GaN layers reveal their narrowest linewidth at a preheated temperature of 800 °C. These results support improvements of crystalline quality and provide optimization of a c-GaN grown epitaxially on the preheated (−2 0 1) β-Ga₂O₃ substrates for further device fabrication. Full article