Search Results (12)

This study proposes a new method to improve the accuracy of car-following models in predicting the mobility of mixed traffic flow involving trucks and automated vehicles (AVs). A classification is developed to categorize car-following behaviors into eight distinct modes based on vehicle type (passenger car/truck) and autonomy level (human-driven vehicle [HDV]/AV) for parameter calibration and simulation. The car-following model parameters are calibrated based on the HighD dataset, and the models are selected through minimizing statistical error. A cellular-automaton-based simulation platform is implemented in MATLAB (R2023b), and a decision framework is developed for the simulation. Key findings demonstrate that mode-specific parameter calibration improves model accuracy, achieving an average error reduction of 80% compared to empirical methods. The simulation results reveal a positive correlation between the AV penetration rate and traffic flow stability, which consequently enhances capacity. Specifically, a full transition from 0% to 100% AV penetration increases traffic capacity by 50%. Conversely, elevated truck penetration rates degrade traffic flow stability, reducing the average speed by 75.37% under full truck penetration scenarios. Additionally, higher AV penetration helps stabilize traffic flow, leading to reduced speed fluctuations and lower emissions, while higher truck proportions contribute to higher emissions due to increased traffic instability. Full article

As autonomous vehicles (AVs) are gradually integrated into existing traffic systems, understanding their impact on freeway operations becomes essential for effective infrastructure planning and policy design. This study explores how AV penetration rates, behavior profiles, and freeway geometry interact to influence traffic performance and safety. Using microscopic simulations in VISSIM (a high-fidelity traffic simulation tool), four typical freeway segment types—basic sections, weaving zones, on-ramp merging areas, and AV-exclusive lanes—were modeled under diverse traffic demands and AV behavior settings. The findings indicate that, while AVs can improve flow stability in simple environments, their performance may deteriorate in complex merging scenarios without supportive design or behavior coordination. AV-exclusive lanes offer some mitigation when AV share is high. These results underscore that AV integration requires context-specific strategies and cannot be universally applied. Adaptive, behavior-aware traffic management is recommended to support a smooth transition toward mixed autonomy. Full article

Driven by the commercialization of intelligent ships, the increasingly complex mixed maritime traffic environment presents significant challenges for collision avoidance between multiple ships due to cognitive and behavioral differences between intelligent and traditional ships. Therefore, it is essential to develop a human-like collision avoidance strategy that incorporates traditional navigational experience and handling practices, enhancing explainability and autonomy. By addressing the actual decision-making needs for predicting other ships’ intentions and considering potential risk impacts, a hierarchical strategy is designed that first seeks course direction adjustment and then determines the magnitude of adjustment. A direction adjustment intention estimation model is proposed, accounting for risk membership and COLREGS, to predict other ships’ collision avoidance intentions. Additionally, an intention influence model and a state influence model are introduced to design decision-making objectives, forming an optimization function based on angle range and maneuvering time constraints to determine the appropriate adjustment magnitude. The results demonstrate the strategy’s effectiveness across various scenarios. Specifically, the distance between ships increased by nearly 25% during the process, significantly enhancing safety. It is worth mentioning that the model has the potential to enhance intelligent ships’ capabilities in complex situational handling and intention understanding. Full article

This study introduces a multi-objective deep reinforcement learning (DRL)-based adaptive transit signal priority control framework designed to enhance safety and efficiency in mixed-autonomy traffic environments. The framework utilizes real-time data from connected and automated vehicles (CAVs) to define states, actions, and rewards, with traffic conflicts serving as the safety reward and vehicle waiting times as the efficiency reward. Transit signal priority strategies are incorporated, assigning weights based on vehicle type and passenger capacity to balance these competing objectives. Simulation modeling, based on a real-world intersection in Changsha, China, evaluated the framework’s performance across multiple CAV penetration rates and weighting configurations. The results revealed that a 5:5 weight ratio for safety and efficiency achieved the best trade-off, minimizing delays and conflicts for all vehicle types. At a 100% CAV penetration rate, delays and conflicts were most balanced, with buses showing an average waiting time of 4.93 s and 0.4 conflicts per vehicle, and CAVs achieving 1.97 s and 0.49 conflicts per vehicle, respectively. In mixed traffic conditions, the framework performed best at a 75% CAV penetration rate, where buses, cars, and CAVs exhibited optimal efficiency and safety. Comparative analysis with fixed-time signal control and other DRL-based methods highlights the framework’s adaptability and robustness, supporting its application in managing mixed traffic and enabling intelligent transportation systems for future smart cities. Full article

The introduction of connected autonomous vehicles may bring opportunities and challenges to traditional traffic control instruments, like ramp metering. This paper starts by constructing the fundamental diagram for mixed-autonomy traffic based on the car-following behaviors of both connected autonomous vehicles and human-driven vehicles. Then, analyses are performed on the main factors that influence the critical velocity, critical density, and road capacity under mixed-autonomy traffic. Two methods named COE-HERO and TRLCRM are developed to support the implementations of coordinated ramp metering for freeways with mixed-autonomy traffic. The COE-HERO method enhances the HERO method by incorporating a critical occupancy estimation module. Both COE-HERO and TRLCRM consider dynamic traffic flow parameters of mixed-autonomy traffic. The TRLCRM method is a reinforcement learning-based approach with a two-stage training framework, enabling it to adapt to varying mixed-autonomy demand scenarios. Extensive microscopic simulations show that the learning-based TRLCRM method can effectively alleviate bottleneck congestion and is robust to deal with various traffic scenarios. The COE-HERO method performs better than the HERO method, indicating the necessity of critical occupancy estimation in the implementations of coordinated ramp metering. Full article

This paper presents the findings from an autonomous shuttle pilot program conducted at the University of North Carolina at Charlotte between June and December 2023 as part of the North Carolina Department of Transportation’s Connected Autonomous Shuttle Supporting Innovation (CASSI) initiative. The shuttle completed 825 trips, transporting 565 passengers along a 2.2-mile mixed-traffic campus route. The study evaluates the shuttle’s operational performance, reliability, and challenges using data from onboard sensors, system logs, and operator reports. Key analyses are divided into four areas: service reliability, which assesses autonomy disengagements caused by signal loss, technical issues, and environmental factors; service robustness, focusing on the shuttle’s ability to maintain operations under adverse conditions; performance metrics, including average speed, autonomy percentage, and battery usage; and service usage, which examines the number of trips and passengers to gauge efficiency. Signal loss and battery-related issues were the primary causes of service interruptions, while environmental factors like weather and vegetation also affected shuttle performance. Recommendations include enhancing vehicle-to-infrastructure communication and optimizing battery management. Full article

The transition to fully autonomous roadways will include a long period of mixed-autonomy traffic. Mixed-autonomy roadways pose a challenge for autonomous vehicles (AVs) which use conservative driving behaviours to safely negotiate complex scenarios. This can lead to congestion and collisions with human drivers who are accustomed to more confident driving styles. In this work, an explainable multi-variate time series classifier, Time Series Forest (TSF), is compared to two state-of-the-art models in a priority-taking classification task. Responses to left-turning hazards at signalized and stop-sign-controlled intersections were collected using a full-vehicle driving simulator. The dataset was comprised of a combination of AV sensor-collected and V2V (vehicle-to-vehicle) transmitted features. Each scenario forced participants to either take (“go”) or yield (“no go”) priority at the intersection. TSF performed comparably for both the signalized and sign-controlled datasets, although all classifiers performed better on the signalized dataset. The inclusion of V2V data led to a slight increase in accuracy for all models and a substantial increase in the true positive rate of the stop-sign-controlled models. Additionally, incorporating the V2V data resulted in fewer chosen features, thereby decreasing the model complexity while maintaining accuracy. Including the selected features in an AV planning model is hypothesized to reduce the need for conservative AV driving behaviour without increasing the risk of collision. Full article

Level 3 automated driving systems could introduce challenges to traffic systems as they require a specific lead time in their procedures to ensure the safe return of vehicle control to the driver. These processes, called ’transitions of control’, may particularly pose complications in accelerating traffic flows when regulations mandate control transitions due to an operational speed limitation of 60 km/h as established in recent certification processes based on UNECE regulations from 2021. To investigate these concerns, we conducted a comprehensive simulation study to examine potential safety implications arising from control transitions within mixed-autonomy traffic. The simulation results indicate adverse safety impacts due to increased safety-relevant interactions between vehicles caused by transitions of control in dynamic traffic flow conditions. Our findings also reveal that those effects could become stronger once string unstable ACC controllers are deployed as well. Full article

The proper functioning of connected and autonomous vehicles (CAVs) is crucial for the safety and efficiency of future intelligent transport systems. Meanwhile, transitioning to fully autonomous driving requires a long period of mixed autonomy traffic, including both CAVs and human-driven vehicles. Thus, collaborative decision-making technology for CAVs is essential to generate appropriate driving behaviors to enhance the safety and efficiency of mixed autonomy traffic. In recent years, deep reinforcement learning (DRL) methods have become an efficient way in solving decision-making problems. However, with the development of computing technology, graph reinforcement learning (GRL) methods have gradually demonstrated the large potential to further improve the decision-making performance of CAVs, especially in the area of accurately representing the mutual effects of vehicles and modeling dynamic traffic environments. To facilitate the development of GRL-based methods for autonomous driving, this paper proposes a review of GRL-based methods for the decision-making technologies of CAVs. Firstly, a generic GRL framework is proposed in the beginning to gain an overall understanding of the decision-making technology. Then, the GRL-based decision-making technologies are reviewed from the perspective of the construction methods of mixed autonomy traffic, methods for graph representation of the driving environment, and related works about graph neural networks (GNN) and DRL in the field of decision-making for autonomous driving. Moreover, validation methods are summarized to provide an efficient way to verify the performance of decision-making methods. Finally, challenges and future research directions of GRL-based decision-making methods are summarized. Full article

Through the continuous development of intellectualization, considering the lifecycle of ships, the future of a waterborne traffic system is bound to be a mixed scenario where intelligent ships of different autonomy levels co-exist, i.e., mixed waterborne traffic. According to the three modules of ships’ perception, decision-making, and execution, the roles of humans and machines under different autonomy levels are analyzed. This paper analyzes and summarizes the intelligent algorithms related to the three modules proposed in the last five years. Starting from the characteristics of the algorithms, the behavior characteristics of ships with different autonomous levels are analyzed. The results show that in terms of information perception, relying on the information perception techniques and risk analysis methods, the ship situation can be judged, and the collision risk is evaluated. The risk can be expressed in two forms, being graphical and numerical. The graphical images intuitively present the risk level, while the numerical results are easier to apply into the control link of ships. In the future, it could be considered to establish a risk perception system with digital and visual integration, which will be more efficient and accurate in risk identification. With respect to intelligent decision-making, currently, unmanned ships mostly use intelligent algorithms to make decisions and tend to achieve both safe and efficient collision avoidance goals in a high-complexity manner. Finally, regarding execution, the advanced power control devices could improve the ship’s maneuverability, and the motion control algorithms help to achieve the real-time control of the ship’s motion state, so as to further improve the speed and accuracy of ship motion control. With the upgrading of the autonomy level, the ship’s behavior develops in a safer, more efficient, and more environment-friendly manner. Full article

Connected and automated vehicle (CAV) technology makes it possible to track and control the movement of vehicles, thus providing enormous potential to improve intersection operations. In this paper, we study the traffic signal control problem at an isolated intersection in a CAV environment, considering mixed traffic including various types of vehicles and pedestrians. Both the vehicle delay and the pedestrian delay are incorporated into the model formulation. This introduces some additional complexity, as any benefits to pedestrians will come at the expense of higher delays for the vehicles. Thus, some valid questions we answer in this paper are as follows: Under which circumstances could we provide priority to pedestrians without over penalizing the vehicles at the intersection? How important are the connectivity and autonomy associated with CAV technology in this context? What type of signal control algorithm could be used to minimize person delay accounting for both vehicles and pedestrians? How could it be solved efficiently? To address these questions, we present a model that optimizes signal control (i.e., vehicle departure sequence), automated vehicle trajectories, and the treatment of pedestrian crossing. In each decision step, the weighted sum of the vehicle delay and the pedestrian delay (e.g., the total person delay) is minimized by the joint optimization on the basis of the predicted departure sequences of vehicles and pedestrians. Moreover, a near-optimal solution of the integrated problem is obtained with an ant colony system algorithm, which is computationally very efficient. Simulations are conducted for different demand scenarios and different CAV penetration rates. The performance of the proposed algorithm in terms of the average person delay is investigated. The simulation results show that the proposed algorithm has potential to reduce the delay compared to an actuated signal control method. Moreover, in comparison to a CAV-based signal control that does not account for the pedestrian delay, the joint optimization proposed here can achieve improvement in the low- and moderate-vehicle-demand scenarios. Full article

Advanced deep reinforcement learning shows promise as an approach to addressing continuous control tasks, especially in mixed-autonomy traffic. In this study, we present a deep reinforcement-learning-based model that considers the effectiveness of leading autonomous vehicles in mixed-autonomy traffic at a non-signalized intersection. This model integrates the Flow framework, the simulation of urban mobility simulator, and a reinforcement learning library. We also propose a set of proximal policy optimization hyperparameters to obtain reliable simulation performance. First, the leading autonomous vehicles at the non-signalized intersection are considered with varying autonomous vehicle penetration rates that range from 10% to 100% in 10% increments. Second, the proximal policy optimization hyperparameters are input into the multiple perceptron algorithm for the leading autonomous vehicle experiment. Finally, the superiority of the proposed model is evaluated using all human-driven vehicle and leading human-driven vehicle experiments. We demonstrate that full-autonomy traffic can improve the average speed and delay time by 1.38 times and 2.55 times, respectively, compared with all human-driven vehicle experiments. Our proposed method generates more positive effects when the autonomous vehicle penetration rate increases. Additionally, the leading autonomous vehicle experiment can be used to dissipate the stop-and-go waves at a non-signalized intersection. Full article