Search Results (471)

Continuous-flow microwave (MW) pasteurization is a relatively new and still poorly understood preservation method with great potential for industrial applications. The raw material for the research was blue honeysuckle berries (Lonicera caerulea var. kamtschatica Sevast.), which are considered a rich source of bioactive compounds. This study investigated the effects of various MW power (2100 W, 2400 W, 2700 W, 3000 W), traditional pasteurization parameters (90 °C/10 min), and blue honeysuckle berry varieties (Aurora and Indigo) on the quality of nectars after the preservation process and during 16 weeks of cold storage (4 °C). Physicochemical measurements were performed (pH, titratable acidity, total soluble solids, nephelometric turbidity), together with spectrophotometric (total polyphenol content, antioxidant activity, color parameters) and chromatographic (L-ascorbic acid, anthocyanins, phenolic acids, iridoids) analyses. A slight effect of MW power on pH, total soluble solids, total titratable acidity, turbidity, and color parameters was demonstrated. Immediately after preservation, the ∆E* values of the samples subjected to MW ranged from 0.48 to 1.06, while after PT they ranged from 1.90 to 5.83. Considering the content of bioactive components, it has been proven that the MW method is more beneficial than traditional pasteurization due to a higher retention of anthocyanins (1–6% reduction or 1–5% increase after MW or 5–16% reduction after PT—values for the individual anthocyanins) and partially higher antioxidant activity. After 16 weeks of storage, MW-treated samples contained more anthocyanins and total polyphenols than untreated samples. The study showed the negligible effect of MW processing on iridoid content; these compounds were the most stable bioactive compounds present in the preserved nectars during storage (changes of up to 5%). Full article

This study presents a novel, rapidly synthesized geopolymer foam fabricated from granite industrial waste using microwave sintering, reducing the demolding time from 7 days to 3 min and the overall processing time to 24 h, while enhancing mechanical performance. Five sample compositions (G1–G5) were prepared with varying granite powder and alkaline solution ratios, cured in a microwave for 3 min, and sintered for an additional 3 min. X-ray fluorescence (XRF), compressive strength tests, water absorption, thermogravimetric analysis (TGA), differential thermal analysis (DTA), and Fourier transform infrared spectroscopy (FTIR) were used for thorough characterization. The compressive strength increased progressively from 13 MPa (G1) to 20 MPa (G5), the total porosity decreased from 33.33% to 18.58%, the water absorption reached a minimum of 2.02% (G5), and the bulk density rose from 1.143 to 1.49 g/cm³. XRF analysis confirmed Si/Al molar ratios of 6.5–11.4, indicating enhanced aluminosilicate network development. FTIR confirmed progressive geopolymerization, with integrated Si-O-T band areas increasing from 41,900 a.u. (G1) to 44,680 a.u. (G5). The microwave sintering approach consumed over 90% less active energy than conventional thermal curing, significantly reducing associated CO₂ emissions and thereby supporting SDG 7, SDG 12, and SDG 13. These results position granite-waste-derived geopolymer foam as a high-performance, energy-efficient alternative to conventional fired bricks and cement-based construction materials. Full article

The aim of this study was to use lemon balm extract (Melissa officinalis L.), prepared via microwave-assisted extraction, for the development of novel formulations of functional edible films based on chitosan, gum arabic, and gelatine (simple and blended formulations). This study focused on changes in the antioxidant properties of enriched films, in addition to their physicochemical and barrier performance for potential applications. Thickness, colour, transparency, water solubility, gas and water vapour permeability, total polyphenol content, and antioxidant capacity were evaluated. The addition of lemon balm extract resulted in an increased polyphenol content (of about 30%) and enhanced antioxidant properties (approximately three-fold), without influencing hydration-related properties (solubility, moisture content and water absorption). These parameters were significantly influenced by the matrix structure (neat chitosan vs. blends with gelatine and gum arabic). Significant increases in the oxygen (three-fold for neat chitosan and five-fold for blends) and carbon dioxide (21-fold for blends) permeability coefficients were also observed in all films with extracts. However, all values remained below 30 × 10⁻⁵ cm³ m⁻¹ d⁻¹ bar⁻¹, indicating that all films retained good gas barrier properties. The results indicate the potential of the developed material for applications in active food packaging as a sustainable alternative to traditional packaging materials, which should be further validated through studies on real food systems and shelf-life evaluation. Full article

Due to the widespread use of microwave electromagnetic radiation, this study examines the microwave electromagnetic properties and compressive strength of composites made from inexpensive components such as Mg_0.5Zn_0.5Fe₂O₄, polystyrene, and activated carbon. Experimental samples were fabricated using thermopressing. The formation of the dielectric core/shell structure for Mg-Zn/polystyrene composites (1:1) and composites with activated carbon additives at weight concentrations of 3, 6.6, and 9.0% was determined using SEM image analysis. Microwave properties were investigated by analyzing the frequency dependences of complex permittivity and magnetic permeability in the frequency range of 100 MHz–5 GHz. As shown by the simulation and experimental measurements of scattering parameters obtained, the compost shows improved microwave absorption properties in the frequency range of 1–5 GHz. Reflection loss spectra showed peaks with values of −17.8 and −18 dB in the frequency range of 2.5–5 GHz for samples with 4.8 wt. % and 6.6 wt. % carbon loading, respectively. The absorption bandwidths of −10 dB in the range of 1.7–2.13 GHz were observed in the best samples. Studies have shown that samples containing 9.0 wt. % of carbon material with thicknesses of 6–10 mm can be considered as an electromagnetic shielding material in the microwave range 1–5 GHz. It was shown that, despite a decrease in porosity from 15.59 to 7.17%, with an increase in the concentration of carbon material in the composites, the compressive strength also decreases from 62.05 to 36.45 MPa. The developed composites are potentially suitable as microwave absorbers for civil applications. Full article

The large-scale generation of waste graphite not only poses environmental challenges but also provides an opportunity for resource recovery. This study proposes a sustainable strategy that utilizes the graphite cutting waste produced during the production of large graphite electrodes through chemical intercalation, microwave-assisted expansion, and in situ urea nitrogen doping techniques to prepare nitrogen-containing micro-expanded graphite (NMG) composite materials. Structural analysis reveals that the nitrogen-doped amorphous carbon layer formed on the expanded graphite (EG) matrix effectively suppresses excessive expansion while preserving its typical worm-like interlayer morphology and porous structure. XPS confirms successful nitrogen doping with predominant pyridinic-N configuration, introducing abundant defect sites and enhancing lithiophilicity. As an anode for LIBs, NMG delivers an exceptional initial discharge capacity of 1907.5 mAh g⁻¹ at 20 mA g⁻¹ and maintains 798.2 mAh g⁻¹ after 50 cycles, nearly twice that of purified waste graphite (G). Remarkably, after 1000 cycles at 1 A g⁻¹, it retains 650.4 mAh g⁻¹ with 89.9% capacity retention, indicating an electrochemical activation process. Kinetic analysis reveals that the superior performance originates from synergistic diffusion-controlled intercalation and surface-dominated pseudocapacitance, with nitrogen-doped defect sites and hierarchical pore architecture promoting rapid ion/electron transport and surface faradaic reactions. This work demonstrates a viable pathway for value-added upcycling of waste graphite while providing insights into designing high-performance anodes through integrated defect engineering and heteroatom doping. Full article

Scandate cathodes have garnered significant attention for their exceptional low-temperature, high-current-density emission characteristics. However, their widespread deployment in vacuum electronic devices is currently hindered by stringent vacuum requirements and susceptibility to ion bombardment. To enhance the engineering applicability of scandate cathodes, this study employs first-principles density functional theory (DFT) to model the surface microstructures of strontium (Sr)–scandium (Sc) co-doped systems. Guided by simulation predictions regarding surface elemental ratios, corresponding emission active materials and cathode samples were fabricated. A systematic comparison between theoretical calculations and experimental measurements reveals a critical trade-off: while increasing Sr content enhances structural stability (indicated by lower formation energies), it concurrently increases the work function. Consequently, an optimal Sr doping level of approximately 2 wt% is identified, which significantly improves emission current density without compromising stability. Cathodes fabricated with this optimized composition were tested in a practical electron gun configuration. Results demonstrate that under low-temperature conditions (1000 °C) and wide-pulse operation (2 ms), the cathode achieves an emission current density of 21.57 A/cm². These findings validate the efficacy of simulation-guided material design and highlight the potential of Sr-doped scandate cathodes for high-power microwave applications. Full article

In this study, we compared the effects of microwave-assisted extraction (MAE) and ultrasound-assisted extraction (UAE) on the total phenolic content, antioxidant activity, morphological characteristics, and tentative identification of bioactive compounds by LC-ESI-MS/MS in pomegranate seeds. We conducted a phytochemical characterization of the extracts by determining the total phenolic content and total flavonoids. Antioxidant activity was evaluated using ferric-reducing antioxidant power (FRAP) and free radical inhibition methods (DPPH and ABTS). Morphological characteristics were analyzed via scanning electron microscopy, UV-Vis and FTIR of the extracts were recorded. Additionally, the main bioactive compounds were identified using HPLC-MS. Our results demonstrated that MAE was the most efficient technique, yielding a higher content of total phenols (35.47 mg GAE/g), total flavonoids (14.44 mg CAE/g) and antioxidant activity (0.19 and 0.41 mmol TEAC/g, as determined by FRAP and ABTS, respectively). In terms of morphological characteristics, UAE induced more changes in the structure of the plant material compared to MAE. According to HPLC-MS analysis, the extract obtained using MAE notably contained coumaric acid, cyanidin, and quercetin, whereas the UAE extract included coumaric acid, cyanidin, kaempferol, and epicatechin. In conclusion, this study demonstrated that MAE is a more efficient method than UAE for extracting bioactive compounds. Pomegranate seeds may represent a potential source of these compounds for application in various industrial areas. Full article

Background/Objectives: Carbon dots (CDs) are promising antimicrobial nanomaterials owing to their biocompatibility, environmental friendliness, and tunable surface chemistry. This study aimed to synthesize nitrogen-doped CDs (AS-CDs) and develop a light-responsive antibacterial system through conjugation with chlorin e6 (Ce6). Methods: AS-CDs were synthesized by a microwave-assisted method using L-ascorbic acid and spermidine, followed by conjugation with Ce6. The materials were characterized by transmission electron microscopy, zeta potential analysis, and spectroscopic methods, and their antibacterial activity was evaluated against Escherichia coli, Staphylococcus aureus, and methicillin-resistant S. aureus (MRSA) under both dark and visible-light conditions. Cytotoxicity was assessed using HaCaT cells. Results: The AS-CDs exhibited a uniform nanoscale morphology with an average diameter of 6.3 nm and a positive surface charge of +15.6 mV, together with intrinsic broad-spectrum antibacterial activity. Ce6 conjugation further enhanced antibacterial efficacy under light irradiation, with the CDs-Ce6 conjugate achieving complete eradication of S. aureus and MRSA and marked inhibition of E. coli at 2.5 μg/mL. Cytotoxicity studies demonstrated low toxicity in HaCaT cells within the effective antibacterial concentration range. Conclusions: These findings highlight the potential of microwave-synthesized, photosensitizer-conjugated CDs as next-generation antimicrobial agents. This platform offers a cost-effective, sustainable, eco-friendly, and efficient platform for combating bacterial infections, with broader potential in pharmaceutical and biomedical applications. Full article

Polyphenols are structurally diverse plant secondary metabolites with broad biological activities and growing applications across the food, health, and materials sectors. Conventional extraction based on organic solvents (e.g., methanol, ethanol) is often energy-intensive, inefficient, and environmentally burdensome. Ionic liquids (ILs) and deep eutectic solvents (DESs) have therefore emerged as greener alternatives for polyphenol extraction. This review evaluates recent advances in solvent design, extraction performance, and process sustainability. Imidazolium-based ILs frequently achieve high yields and selectivity, particularly when coupled with ultrasound or microwave-assisted extraction, but high cost, synthetic complexity, viscosity-related constraints, and potential toxicity hinder scaleup. By contrast, DESs—especially those derived from choline chloride or lactic acid—are easier to prepare, less costly, and more compatible with industrial implementation, with efficiency enhanced by tailoring hydrogen bond networks, water content, and process intensification. Critical downstream challenges persist for both solvent classes, notably in extract purification and solvent recovery due to low volatility; approaches such as resin adsorption, antisolvent precipitation, and direct formulation have been explored. Overall, ILs and DESs represent compelling alternatives to conventional solvents, and future progress will depend on integrated extraction–recovery strategies, systematic solvent selection, and validation under scalable, sustainable processing conditions. Full article

Activated carbons are usually prepared from natural precursors (e.g., fruit stones or nutshells) by carbonization and activation processes carried out at 400–1000 °C. They exhibit well-developed porosity, and chemical activation introduces hydrophilic functional groups on their surface, providing excellent sorption properties. However, the high temperatures required during thermal treatment increase production costs. In this work, cost-reducing methods for preparing carbon sorbents are proposed. Carbonization of H₃PO₄ activated waste pistachio nutshells was performed using classical pyrolysis (500 or 550 °C, 30 min, N₂ atmosphere) and microwave treatment (power 1000 W, 20 min). The properties of the synthesized carbons were characterized using thermogravimetry and spectroscopic techniques including infrared (ATR), Raman, photoelectron (XPS) spectroscopies, and scanning electron microscopy with energy-dispersive X-ray spectroscopy (SEM-EDS). Porous structure parameters were determined using nitrogen adsorption experiments. The efficiency of Pb²⁺ removal from spiked ultrapure, tap and river water was evaluated by batch sorption experiments and inductively coupled plasma–mass spectrometry. The most porous carbons were those prepared at 500 and 550 °C, with specific surface areas of 910 and 256 m²/g, respectively. Surface phosphates increased the Pb²⁺ sorption efficiency to 99% from ultrapure water, at an initial concentration of 300 µg Pb²⁺/L. The material obtained with the microwave method was not fully carbonized and remained nonporous, but it also exhibited 99% Pb²⁺ uptake from ultrapure water due to the presence of oxygen-containing surface groups. The Pb²⁺ removal from spiked tap and river water reached up to 84% and 94%, respectively, at the spiking level of 300 µg Pb²⁺/L. Full article

This study presents a comparative evaluation of four drying methods for carrot, red beet, and pumpkin pomace to produce natural functional food ingredients. The work addresses the valorization of 35–45% vegetable processing waste—a rich source of bioactive compounds—aligning with circular bioeconomy principles and Kazakhstan’s goals for deep processing of agricultural raw materials. The compared methods were convective drying (CD), ultrasound pretreatment + convective drying (US + CD), vacuum-microwave drying (VMD), and ultrasound pretreatment + vacuum-microwave drying (US + VMD). Drying kinetics, water activity, physicochemical and functional properties of powders, retention of bioactive compounds, color characteristics, thermal stability, and sensory attributes were assessed. Kinetics were fitted using Midilli et al., Page, and Weibull models. US + VMD provided the highest drying acceleration (6–11 times faster than CD), reaching final moisture of 5.1–5.9%, water activity a_w 0.27–0.31 in 80–170 min, and bioactive compound retention of 90–95% (carotenoids 92–95%, betalains 90–94%). It also delivered superior flowability (Carr’s index 22.5–30.4%), dispersibility (80–88% in 30 s), and thermal stability (75–85% at 200 °C). Acceleration varied by raw material: maximum for beet (up to 11×) due to soluble sugars and nitrates, minimum for pumpkin (5.5–8×) due to dietary fibers and pectins, and intermediate for carrot (6–9×) influenced by carotenoids’ dielectric properties. The results highlight US + VMD’s strong potential for producing functional powders to replace synthetic additives in food systems. Effective method selection and parameter optimization require consideration of raw material type and rheological characteristics. Full article

To mitigate the interlayer defects and weak interfacial adhesion inherent in FFF-printed parts, thereby facilitating subsequent supercritical foaming applications, a microwave-assisted interlayer healing strategy is developed for FFF-printed, supercritical CO₂-foamed thermoplastic polyurethane (TPU) by incorporating aminated helical multi-walled carbon nanotubes (AS-MWCNTs). Owing to their unique helical morphology, AS-MWCNTs exhibit enhanced microwave absorption and localized heating capability, enabling selective thermal activation at interlayer regions within the foamed architecture. Microwave irradiation induces localized softening of the TPU matrix and promotes polymer chain mobility and interdiffusion across layer interfaces, while preserving the cellular morphology and bulk foamed structure. By optimizing AS-MWCNT loading, substantial improvements in interlayer bonding strength, energy absorption, and overall mechanical performance are achieved. This work provides an effective strategy to restore interlayer integrity in supercritical CO₂-foamed, additive manufactured elastomers and offers insights into the design of microwave-responsive, self-healing cellular materials. Full article

(1) Research Highlights: This study provides the first integrated assessment of Scots pine (Pinus sylvestris L.) growing in the urban forests of Karaganda, Kazakhstan, a city consistently ranked among the most air-polluted cities globally. We examined the adaptive phyto-chemical response of needles to extreme technogenic stress and evaluated their dual potential as biological filters and renewable sources of bioactive compounds. (2) Background and Objectives: Urban forests are critical for mitigating air pollution; however, the biochemical responses of trees in heavily industrialized environments remain poorly understood. Karaganda faces severe atmospheric pollution from mining, metallurgy, and energy sectors, with particulate matter (PM) levels exceeding permissible limits by up to 20-fold. This study aimed to evaluate the state of Pinus sylvestris, a key component of local protective plantations, by studying heavy metal accumulation, anatomical localization of secondary metabolites, and the phytochemical profile and biological activity of needle extracts obtained using different extraction techniques. (3) Materials and Methods: Needles were collected from 15 trees across three sites in Karaganda’s industrial green zones. Heavy metal content (Pb, Cd, As, and Hg) was determined using atomic absorption spectroscopy and voltammetry. Anatomical–histochemical analysis localizes major metabolite classes. Liquid extracts were prepared using four methods, percolation (PER), vortex-assisted (VAE), microwave-assisted (MAE), and ultrasound-assisted (UAE) extraction, and analyzed by GC-MS. Antimicrobial activity was tested against S. aureus, B. subtilis, E. coli, and C. albicans using the disk diffusion method. The antioxidant capacity (water- and fat-soluble) was measured amperometrically. Statistical analysis was performed using one-way ANOVA with Tukey’s HSD test (p < 0.05). Results: Despite extreme ambient pollution, heavy metal concentrations remained below pharmacopoeial limits (Pb < 0.1, Cd < 0.05, As < 0.01, Hg < 0.001 mg/kg), indicating effective biofiltration without toxic accumulation. Histochemistry confirmed the active synthesis of protective phenolics, flavonoids, and essential oils in the mesophyll, epidermis, and schizogenic cavities. GC-MS identified 72 compounds in the PER extract, 70 (the VAE), 72 in (MAE), and 46 in (UAE). The PER extract exhibited the highest relative abundance of bioactive terpenoids: α-cadinol (5.24%), α-muurolene (4.32%), and caryo-phyllene (2.20%). UAE extracts exhibited elevated 5-hydroxymethylfurfural (6.90%), indicating degradation. Antimicrobial testing revealed that PER produced the largest inhibition zone against S. aureus (15.0 ± 1.0 mm), significantly exceeding that of the other methods (p < 0.001). PER extract also demonstrated the highest water-soluble antioxidant capacity (3600 ± 0.40 mg quercetin equiv./dm³) and substantial fat-soluble activity (1633 ± 0.23 mg gallic acid equiv./dm³). (4) Conclusions: Pinus sylvestris in Karaganda exhibits remarkable adaptive resilience, maintaining safe heavy metal levels while accumulating a rich repertoire of stress-induced secondary metabolites. Classical percolation optimally preserves this native phytocomplex, yielding extracts with superior antimicrobial and antioxidant properties. These findings support a dual-use model wherein urban pine plantations simultaneously serve as living biofilters and renewable sources of standardized bioactive extracts, a concept with direct implications for circular bioeconomy strategies in industrial regions worldwide. This supports the strategic importance of coniferous plantations for bioremediation and sustainable resource use in industrial regions. Full article

Nanoparticle-catalysed microwave-aided multicomponent reactions (MCRs) have been demonstrated to be competent and environmentally benign tools for the quick synthesis of a wide spectrum of fused heterocyclic systems. The distinctive physicochemical properties of nanoparticles, including a substantial surface area, readily modifiable surface functionality, and heightened catalytic activities, when coupled with microwave irradiation, have enabled a marked improvement in reaction rates, product yields, and selectivity compared to conventional heating methods. This review highlights recent advancements in microwave-assisted MCRs facilitated by diverse nanomaterials, such as magnetic nanocatalysts, metal and metal oxide nanoparticles, mesoporous silica systems, and nanohybrids. It emphasises catalyst design, catalytic efficacy, scope, recyclability, and alignment with green chemistry principles in both solvent-free and aqueous environments, as well as the utilisation of recyclable catalysts. In summary, microwave-assisted multi-component reactions catalysed by nanoparticles are ecofriendly and versatile methods for the sustainable synthesis of such fused heterocycles containing bioactive pyridine, pyrazole, phenazine, pyrimidine, pyran, imidazole, and relevant pyridine derivatives, possessing potential in medicinal and material chemistry. Full article

To promote the high-value utilization of fly ash (FA) and address the prolonged setting time and limited strength associated with conventional single-alkali activation, this study proposes a synergistic dual-alkali activation strategy using Ca(OH)₂ and Na₂SiO₃ in combination with microwave-assisted curing for low-calcium fly ash. Samples containing varying amounts of Ca(OH)₂ were systematically characterized by X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), compressive strength testing, and pore structure analysis. The results show that Ca(OH)₂ facilitates the formation of calcium aluminosilicate hydrate (C-A-S-H) gel, while Na₂SiO₃ sustains the alkaline environment and enhances the dissolution of SiO₂ and Al₂O₃ from FA. The dual-alkali synergistic system, when coupled with microwave treatment, markedly refines the pore structure, increases the degree of polymerization, and improves compressive strength from 0.5 MPa to 1.7 MPa with increasing Ca(OH)₂ content. In addition, the prepared fly ash-based geopolymer (FABG) demonstrates pronounced pH-buffering capacity in acidic environments and exhibits antibacterial activity, primarily attributable to its sustained release of alkalinity. This work highlights that integrating dual-alkali activation with microwave curing can simultaneously enhance microstructural development, chemical stability, and functional performance in low-calcium FA systems, thereby offering a viable route for the development of sustainable and multifunctional green building materials derived from industrial solid waste. Full article