Search Results (237)

Ion-imprinted polymers (IIPs) are advanced adsorbents featuring selective recognition cavities for targeted metal ion capture, offering a promising route to high-efficiency separation in extractive metallurgy. In the present work, the evolution, design principles, synthesis strategies, separation mechanisms, and practical applicability of IIPs for metal recovery from complex aqueous matrices are overviewed. Key material components, including functional monomers, crosslinkers, template ions, initiators, solvents, and support materials, are discussed in relation to adsorption capacity, selectivity, kinetics, stability, and recyclability. Major preparation routes, such as surface imprinting, bulk polymerization, in situ polymerization, and sol–gel methods, are critically compared to clarify their advantages and limitations. Recent applications for base metals, precious metals, and rare-earth elements demonstrate that IIPs can achieve high specificity and rapid equilibrium under optimized conditions. However, their translation from simulated solutions to real leachates remains constrained by interfering ions, organic contaminants, mass transfer resistance, incomplete template removal, and matrix complexity. Mitigation strategies, including sample pretreatment, improved polymer architecture, and hybrid supports, are therefore emphasized. Additionally, chemometric modelling, machine learning, or artificial intelligence-assisted design may be implemented to advance the prospects of IIPs in industry. Conclusively, IIPs represent a strong separation platform, yet industrial deployment requires robust validation with real feed streams and scalable regeneration protocols during column operation, as well as under chemically aggressive conditions at scale. Full article

Heat pumps are core equipment for efficient low-grade thermal energy utilization and low-carbon transformation of the energy structure, offering significant energy-saving potential in building heating and industrial waste heat recovery. This paper reviews the research progress and technical challenges of compression, absorption, and adsorption heat pumps as well as nanofluid-enhanced heat transfer technology and elastocaloric heat pump systems. Air source heat pumps can delay frosting through variable frequency, heat storage, and waste heat recovery. However, accurate prediction models for performance degradation under extreme cold conditions are lacking. Although ground source and water source heat pumps exhibit significant energy efficiency advantages, ground source systems may suffer from performance degradation due to underground thermal imbalance. The application of water source systems is strictly constrained by water resource conditions. Driven by low-grade waste heat, absorption heat pumps employing traditional working pairs suffer from crystallization, corrosion, or high rectification energy consumption. The COP of a single-effect cycle under 80~100 °C waste heat is only 1.2~1.9, while hybrid cycles can reach approximately 3.2 at 120~150 °C. Although adsorption heat pumps achieve significantly improved performance under continuous heat recovery cycles, the full-scale power density of novel adsorbents such as metal–organic frameworks is inferior to the power density of traditional silica gel. Moreover, under off-design conditions, the performance drops by 23~48% compared to theoretical values. Nanofluids can enhance heat transfer, but the long-term effects of particle agglomeration at high temperatures on pump power consumption and system compatibility remain to be systematically evaluated. Elastocaloric heat pump systems can achieve refrigerant-free cooling, but current prototypes still cannot compete with traditional vapor compression systems in long-cycle fatigue reliability and power density. Current heat pump technologies generally face challenges such as insufficient adaptability to extreme conditions, bottlenecks in working fluids and materials, and a lack of long-term validation. Future research must construct a multi-source coupling optimization system, address common problems in working fluids and materials, promote long-term validation and kilowatt-level prototype demonstrations, and drive the large-scale deployment and engineering application of heat pump technology toward high efficiency, intelligence, and high reliability. Full article

Given the urgent need to regulate oxidative stress microenvironments in chronic wound healing, hydrogel dressings that simultaneously integrate antioxidant, antibacterial, mechanically adaptive, and biocompatible properties are highly desirable. In this study, a natural polymer-based composite hydrogel dressing loaded with zinc-quercetin nanozyme (Zn-Q) was designed. The gel skeleton was constructed via a dual network of photocrosslinked methacrylated silk fibroin (SilMA) and mercaptolated hyaluronic acid (HA-SH) via thiol-ene click chemistry, with the catalase (CAT)-like Zn-Q nanozyme encapsulated in situ within the network, thereby achieving synergy between chemical crosslinking and dynamic metal-polyphenol coordination. Systematic characterization revealed that Zn-Q nanozyme adopted a stable octahedral coordination configuration, and its continuous porous structure exposed abundant catalytically active sites. The composite hydrogels exhibited a highly interconnected, three-dimensional (3D) porous morphology, with swelling ratios that increased significantly with Zn-Q nanozyme content (up to around 1082%). Rheological and mechanical tests demonstrated that although incorporating the nanozyme reduced the storage modulus, the reversible physical crosslinks formed via hydrogen bonding and coordination interactions endowed the material with excellent tensile toughness and energy-dissipation capacity, exhibiting typical Mullins softening behavior. Functional evaluation showed that Zn-Q nanozyme conferred superior free radical scavenging capability to the hydrogels and exerted dose-dependent inhibition against both Staphylococcus aureus and Escherichia coli. Furthermore, the hydrogels exhibited favorable adhesion to various wet organs and heterogeneous material surfaces, with hemolysis rates below 5% and cell viability exceeding 100% after 3 days of culturing with fibroblasts, confirming their excellent hemocompatibility and cytocompatibility. This study provides an experimental basis for developing a new type of wound repair materials that integrate antioxidant, anti-infective, and mechanically adaptive properties, holding significant application potential in oxidative stress-related tissue repair fields. Full article

In recent years, a novel class of highly stable multiprotein complexes, with molecular masses ranging from 1 to 2 MDa, has been identified in human milk, placenta, sea urchin eggs, and sea cucumbers. These complexes exhibit extraordinary stability, dissociating only under stringent conditions involving 8 M urea, 3 M MgCl₂, EDTA, and DTT. Previous investigations have demonstrated that complexes derived from different organs of the sea cucumber Paracaudina chilensis differ in size, molecular mass, and protein/peptide composition; however, their enzymatic activities have remained unexplored. In the present work, we performed the first systematic analysis of phosphatase activity associated with highly stable complexes isolated from five organs of P. chilensis: the body wall, gonads, respiratory trees, intestine, and coelomic fluid. Complexes were purified via gel filtration chromatography on Sepharose 4B, followed by ultracentrifugation. Phosphatase activity was determined spectrophotometrically by monitoring the hydrolysis of p-nitrophenyl phosphate. Our results indicate that all five complexes harbor phosphatases with optimal pH values spanning 7.0 to 10.0. Alkaline phosphatases (pH 9.0–10.0) displayed pronounced organ specificity: maximal activity was observed in the intestinal complex, whereas minimal activity was detected in the gonadal complex. Phosphatase activity in complexes from the body wall and respiratory trees exhibited a bell-shaped dependence on Mg²⁺ concentration, with optima at 5 mM and 1 mM, respectively; in contrast, activity in the intestinal and coelomic fluid complexes increased to a plateau at 5–10 mM Mg²⁺. Ca²⁺ ions predominantly inhibited activity, with the notable exception of the intestinal complex, where they exerted no effect on hydrolysis. EDTA treatment resulted in complete inactivation of the enzymes in most complexes; however, intestinal activity was retained at 50% even at high chelator concentrations, suggesting the presence of a metal-independent phosphatase. Collectively, these data indicate that the stable multiprotein complexes of P. chilensis contain an organ-specific repertoire of phosphatases that differ in pH optimum, metal ion dependence, and inhibitor sensitivity. These findings open new avenues for understanding the roles of such complexes in organ-specific physiological functions and regenerative mechanisms in echinoderms. Full article

In this study, taking NdCl₃ and 2-amino-1,4-benzenedicarboxylic acid (H₂ATA) as raw materials, a novel lanthanide metal–organic framework, Nd(ATA), was synthesized by the coprecipitation method. After loading antibiotic levofloxacin (LEV), Nd(ATA) was combined with GelMA hydrogel to prepare a drug-loaded composite hydrogel, LEV@Nd(ATA)-Gel, which can emit near-infrared fluorescence under excitation at 808 nm and possesses improved mechanical properties compared to pure GelMA hydrogel. LEV@Nd(ATA)-Gel exhibited high bactericidal activity and low cytotoxicity, with cell viability increased by 35% compared to the control group. The release rate of the loaded LEV was found increasing with the pH decreasing from 7 to 3, and demonstrated a potential responsiveness to wound microenvironment. Furthermore, drug delivery studies revealed a significant correlation with the fluorescence intensity of the composite hydrogel and the drug release behavior, and the extent of drug release was quantitatively captured by an in vitro imaging technology. This study successfully integrated the drug release with fluorescent signal of carrier, providing a highly sensitive and visualizable strategy for the development of internal wound adhesive. Full article

The photocatalytic conversion of carbon dioxide (CO₂) into methanol represents a promising strategy for both greenhouse gas mitigation and renewable fuel production. In this study, a niobium-based metal–organic gel (Nb-MOG) was employed as a photocatalyst for the reduction of CO₂ to methanol under UV irradiation in a batch photoreactor. A two-factor experimental design was conducted to evaluate the effects of sodium carbonate concentration and catalyst loading on methanol production. The Nb-MOG catalyst was dispersed in the reaction medium and irradiated with UV light for four hours. During the photocatalytic experiments, samples were periodically collected and analyzed by headspace gas chromatography coupled with flame ionization detection (HS-GC-FID) to quantify methanol production. The results showed that both the Na₂CO₃ concentration and catalyst loading exerted significant positive effects on methanol formation. The highest methanol yield was achieved at a Na₂CO₃ concentration of 0.10 mol·L⁻¹ and a catalyst loading of 0.50 g·L⁻¹. The experimental design results demonstrated a good fit of the statistical model to the experimental data, highlighting its predictive capability and confirming the reliability of the obtained results. Furthermore, Nb-MOG exhibited enhanced light-harvesting and charge-transfer properties, leading to measurable methanol production under the investigated conditions. These findings contribute to a better understanding of Nb-MOG’s photocatalytic behavior and demonstrate its potential for application in a sustainable CO₂ reduction system. Full article

Nanostructured Co₃O₄ was synthesized via a sol–gel approach employing the ionic liquid 1-ethyl-3-methylimidazolium trifluoromethylsulfonate ([EMIm]TfO) and subsequently evaluated as a high-performance anode material for lithium-ion batteries. Ionic liquids, distinguished by their low volatility, high thermal stability, and tunable chemical properties, represent a greener alternative to conventional organic solvents for the synthesis of functional nanomaterials. The electrochemical performance of the as-prepared material was systematically assessed through galvanostatic charge–discharge cycling, cyclic voltammetry, and rate capability tests. The Co₃O₄ electrode exhibited a high reversible capacity of approximately 1100 mAh g⁻¹ after 50 cycles at a current density of 200 mA g⁻¹, along with excellent coulombic efficiency approaching ~100% after the initial cycles. Furthermore, the material demonstrated strong rate capability, delivering about 600 mAh g⁻¹ at 1 C, and recovering its capacity upon returning to lower current densities. The improved electrochemical performance is primarily attributed to the nanoscale architecture induced by the ionic liquid-assisted synthesis, which facilitates rapid lithium-ion transport and effectively buffers volume variations during repeated cycling. Notably, the ionic liquid serves a dual function as both a green reaction medium and a structure-directing agent, enabling precise control over the material’s morphology and properties. This study demonstrates a versatile strategy for the rational design of potential transition-metal oxide anodes, paving the way for high-performance electrode materials. The findings contribute to the development of next-generation lithium-ion batteries tailored for clean and sustainable energy storage applications. Full article

Adsorption therapies in hemodialysis have emerged as an innovative approach for removing protein-bound uremic toxins (PBUTs). The present work focuses on the enhancement of the adsorption capacity of hemodialysis membranes through the incorporation of Metal–Organic Frameworks (MOFs). The removal capacity of PBUT p-cresyl sulfate by cellulose acetate (CA)/silica (SiO₂)/MOF mixed matrix membranes was investigated with two types of MOFs, UiO-66 which synthesis and characterization has been previously reported, and UiO-66-NH₂. The UiO-66-NH₂ MOFs were synthesized and characterized by infrared spectroscopy, X-ray diffraction, nitrogen adsorption–desorption equilibrium at −196 °C, and thermogravimetry analysis. Both mixed matrix membranes were synthesized by coupling the phase inversion technique with the sol–gel method and with casting solutions incorporating the MOF dispersions. The two membrane types of MOFs were characterized in terms of hydraulic permeability, molecular weight cut-off, and rejection coefficients to pCS and bovine serum albumin (BSA). The mixed matrix membranes CA/SiO₂/UiO-66-NH₂ exhibited lower permeability and molecular weight cut-off when compared to the CA/SiO₂/UiO-66 ones. In permeation tests simulating a hemodialysis session with a feed solution of 100 ppm pCS and 35 g/L BSA, it is shown the improved performance of MOFs membranes as the rejection coefficients of free pCS is 0.2% for the CA22/SiO₂/UiO-66 membrane with 1.5% of MOF and 2.6% for the CA22/SiO₂/UiO-66-NH₂ membrane with 2% of MOF. The capacity of these MOF membranes in removing pCS bound to BSA was addressed through the development of a new methodology to quantify the pCS free and bound to BSA. The CA22/SiO₂/UiO-66 membrane with 1.5% of MOF has a removal capacity of 99.8% and the CA22/SiO₂/UiO-66-NH₂ membrane with 2% of MOF 95.9%. Based on these results, it is concluded that the mixed matrix membranes CA22/SiO₂/UiO-66 and CA22/SiO₂/UiO-66-NH₂ are promising candidates for PBUTs removal in hemodialysis. Full article

The growing field of nanobiotechnology could provide an alternative platform for the development of new therapeutic agents. A potential means for achieving these goals are nanoparticles of rare-earth metals, for example, nanoceria. According to the results of numerous in vitro and in vivo studies, not only oxide forms of lanthanides can demonstrate a pharmacological effect. A promising nano-object for biomedical application is cerium phosphate, which exhibits both properties characteristic of cerium dioxide and its own unique properties, due to the diversity of morphology. However, at present, a unified methodological approach has not been formulated that would make it possible to formulate principles for obtaining a compound with specified properties. This review was conducted on using the international databases PubMed, PubChem, Scopus and Google Scholar, and included original studies and reviews. The literature describes the preparation of cerium phosphate nanoparticles by the hydrothermal, chemical precipitation, microwave, and sol–gel methods. It was established that reaction temperature, pH value of the medium, use of organic solvents, ratio of reagents, and precursors have a direct influence on the size, shape, and structure of the obtained nano-object, making it possible to synthesize nanospheres, nanorods, and nanoneedles by regulating these parameters. In addition, the strategy of obtaining nano-objects with specified properties can be implemented by using excipients of predominantly polymer nature. The use of auxiliary substances is capable both of exerting a stabilizing effect and improving adherence to the nanoscale range, and of influencing pharmacological activity. The literature describes the possibility of using cerium phosphate as a redox-active, regenerative, antibacterial, sunscreen, and antitumor agent. However, the insufficient amount of data on the toxicological profile, as well as the results of in vivo studies, remains a significant limitation for the introduction of cerium phosphate into clinical practice. Thus, the purpose of the present review is to identify patterns that make it possible to formulate recommendations for the synthesis of cerium phosphate with specified properties, to assess factors affecting its suitability for use in biomedicine, and to consider its prospects and limitations. Full article

Elemental sulfur frequently coexists with organic polysulfides in environmental samples and laboratory sulfurization experiments, complicating the accurate analysis of sulfur speciation. Reliable methods for selective sulfur removal are therefore required to avoid analytical artifacts. In this study, we systematically evaluated commonly used chemical sulfur removal approaches, including treatment with metallic copper and silver and reaction with tetrabutylammonium sulfite, and compared them with a chromatographic separation method based on C18 reversed-phase silica gel column chromatography. Model organic polysulfides, dimethyl polysulfides, diallyl polysulfides, dibenzyl disulfide, and cyclic polysulfide lenthionine were used to assess method performance under controlled conditions. The results demonstrate that chemical treatments are non-selective and lead to substantial decomposition of organic polysulfides, particularly for longer-chain compounds. In contrast, C18 reversed-phase silica gel column chromatography enables efficient and selective removal of elemental sulfur while preserving the original composition of organic polysulfides, with recoveries in the range of ~90–107%. These findings indicate that commonly applied sulfur removal procedures may introduce significant biases in sulfur speciation analyses. The chromatographic approach presented here provides a reproducible and non-destructive alternative for sample preparation, improving the reliability of studying sulfur speciation and transformation in natural and laboratory systems. Full article

Solar interfacial evaporation is promising for freshwater production, yet thermodynamic energy limits and mass transfer attenuation in high-salinity environments restrict practical applications. To address these challenges, a 3D high-efficiency evaporator is developed by cross-linking a hydrophilic composite gel onto a macroporous sponge scaffold. This spatially decoupled architecture enables fundamental water-state regulation and efficient environmental heat harvesting. Specifically, hydrophilic functional groups in the gel network reduce the equivalent enthalpy of vaporization of water to 1181.8 J g⁻¹. Simultaneously, the 3D columnar structure induces a sidewall cold sink effect to extract additional ambient thermal energy. Through this synergy, the PCPH delivers a remarkable apparent evaporation rate of 8.59 kg m⁻² h⁻¹ under one standard sun. Furthermore, interconnected macropores within the sponge establish excellent convective pathways for rapid ion diffusion. Consequently, the device operated continuously for 8 h in a 10 wt% NaCl solution without significant blockage and decreased key metal ion concentrations in 3.5 wt% simulated seawater by 4 to 5 orders of magnitude. The purified water fully satisfies World Health Organization standards. This study offers an innovative strategy to surpass conventional photothermal bottlenecks and design highly durable water treatment materials. Full article

The world’s growing need for energy, fueled by industrial expansion and a rising population, continues to be a challenge for the scientific community. The heavy reliance on fossil fuels that contribute to environmental degradation and public health concerns, is shifting toward sustainable alternatives, with hydrogen production via advanced catalysts as an energy source emerging as a promising solution. This transition addresses the challenges posed by harmful combustion emissions. In this study, we developed an innovative PANI@Cu-NA-MOF nanocomposite catalyst through a sol–gel synthesis approach that strategically integrates conducting polymers with metal–organic frameworks. The catalyst was characterized using different sets of techniques. Surface morphology and elemental composition were investigated using SEM-EDX, while structural analysis was carried out with FTIR that helped to identify the chemical bonds and functional groups, and UV-Vis spectroscopy provided information on its light absorption properties. In addition, TGA was used to evaluate thermal behavior, and XPS offered detailed surface chemical analysis. It was observed by morphology that PANI@Cu-NA-MOF is a noncapsular-like structure. It is thermally highly stable; a TGA study showed that up to 550 °C, almost 2.5% of weight was lost. The single peak in UV-Vis is the preparation of a successful composite. XPS and FTIR reveal the required peaks of functional groups and elements. The PANI@Cu-NA-MOF composite turned out to be quite effective for water electrolysis, requiring an overpotential of just 0.47 V to drive the reaction. When tested against the reversible hydrogen electrode, we observed onset potentials of 1.6 V/RHE for the oxygen evolution reaction and 0.2 V/RHE for the hydrogen evolution reaction. What makes this particularly interesting is that such performance significantly cuts down on the energy needed for electrolysis, which could make hydrogen production much more practical. Since hydrogen burns cleanly and offers a real alternative to fossil fuels, having an efficient catalyst like this brings us one step closer to sustainable energy. Full article

The demand for high-energy-density and fast-charging solid-state lithium metal batteries (SSLMBs) often subjects practical devices to internal thermal loads, making high-temperature operation a common operational condition rather than an isolated scenario. To address the interfacial degradation and dendrite growth accelerated by such thermomechanical stresses, we developed a composite gel electrolyte (CGE) by incorporating an optimal concentration of active Li_6.4La₃Zr_1.4Ta_0.6O₁₂ (LLZTO) into a fluoropolymer network. The abundant Lewis acidic sites on the LLZTO surfaces promote competitive solvation decoupling by interacting with anions, thereby modulating the primary solvation sheath of Li⁺. This localized modulation lowers the lithium-ion migration activation energy to 0.248 eV and facilitates a dual-interfacial passivation mechanism. Specifically, a rigid, inorganic-rich solid electrolyte interphase (SEI) forms to suppress morphological instability at the lithium anode, while an organic-dominated cathode electrolyte interphase (CEI) enhances the oxidative stability up to 4.3 V. As a result, symmetric cells demonstrate stable electrodeposition for over 450 h at 80 °C and 0.5 mA cm⁻². Furthermore, NCM811/Li full cells utilizing this CGEs exhibit significantly improved thermal resilience and cycling stability. Full article

Benzothiophene polymers, as a class of novel organic semiconductor materials, exhibit significant potential in the field of photocatalysis due to their broad light-responsive range and tunable energy level structures. In this study, a benzothiophene-based polymer organic semiconductor (denoted as P42) was integrated with titanium dioxide (TiO₂) via a simple sol–gel method, yielding an organic–inorganic hybrid material. This composite facilitates the modulation of energy level potentials and promotes the effective separation of photogenerated charges, thereby demonstrating remarkable synergistic catalytic performance in the photocatalytic oxidative coupling of benzylamines. By optimizing the ratio of organic to inorganic components and various photocatalytic reaction conditions, the hybrid material 1.7%P42-TiO₂, containing 1.7 wt% of the dithiophene polymer without any metal cocatalysts, exhibited outstanding performance under an air atmosphere and visible light irradiation after 12 h. It achieved a yield of over 88.7% and a selectivity exceeding 89.8% in the synthesis of N-benzoylaniline, significantly surpassing the performance of pure TiO₂ (52.9% yield, 54.9% selectivity) and P42 (54.4% yield, 54.9% selectivity). Structural and photophysical characterizations, including UV–Vis DRS, XRD, SEM, TEM, and EPR, reveal that the enhanced photocatalytic activity originates from broad visible-light absorption, improved charge separation, and well-matched energy levels. Mechanistic investigations suggest a synergistic pathway involving photoinduced hole oxidation and radical-mediated coupling. This work provides valuable insights and a reference for the solar-driven photocatalytic synthesis of nitrogen-containing platform molecules under mild conditions. Full article

Magnetic nanomaterials (MNMs) have been adopted as effective platforms for water remediation owing to their excellent surface-area-to-volume ratios, tunable surface chemistry, and magnetic separability. This review highlights the recent progress made in the synthesis, properties, and environmental applications in the removal of organic and inorganic contaminants using magnetic nanoparticles (MNPs) and one-dimensional magnetic nanofibers. Demonstrated removal rates of organic contaminants such as dyes, pharmaceuticals, and pesticides are often up to 85–100% under laboratory conditions, with adsorption capacities of 580 mg·g⁻¹ for melanoidin, 397.43 mg·g⁻¹ for Congo Red, and 392.64 mg·g⁻¹ for tetracycline. For heavy metals such as As(V), Cd(II), Cr(VI) and Pb(II), efficiencies are generally between 90–99% with maximum adsorption capacities of 909.1 mg·g⁻¹ for Pb(II). In particular, the review compares major synthesis routes such as coprecipitation, hydrothermal, solvothermal, thermal decomposition, sol–gel, microwave, and green methods by evaluating their effect on particle size (6–50 nm), magnetic properties (saturation magnetization up to ~101 emu·g⁻¹), and removal performance. The four principal mechanisms are described in this paper—adsorption, filtration, transformation, and photocatalysis—giving special emphasis to the advantages of magnetic recovery and advanced oxidation processes. Although most studies remain at the laboratory scale, MNMs demonstrate strong potential for scalable wastewater treatment, provided that toxicity, life-cycle impacts, and matrix effects are carefully evaluated. Full article