Search Results (122)

Background and Clinical Significance: Juvenile ossifying fibroma (JOF) is a rare, benign, but locally aggressive fibro-osseous neoplasm that primarily affects the craniofacial skeleton of children and adolescents. Early surgical intervention is often required due to the lesion’s rapid growth and potential for significant facial deformity. Long-term functional and esthetic rehabilitation following maxillary resection in early childhood remains a clinical challenge. Case Presentation: This case reports a unique long-term follow-up of a 22-year-old female patient who underwent partial maxillary resection at the age of five due to JOF. Initial reconstructive efforts failed, necessitating a removable prosthesis to restore function and appearance. The patient experienced persistent self-consciousness and social withdrawal during adolescence, attributed to altered facial esthetics and repeated surgical disappointment. Nevertheless, prosthetic rehabilitation significantly improved mastication, phonetics, facial symmetry, and psychological well-being. Conclusions: The enduring psychosocial and functional impact of early maxillary resection for JOF and the pivotal role of prosthodontic management in long term rehabilitation are highlighted. A multidisciplinary approach that includes psychological support is suggested. This case report is among the few reports documenting long-term prosthetic outcomes for pediatric JOF patients extending into adulthood. Full article

Background/Objectives: Hypohidrotic ectodermal dysplasia (HED) is a rare hereditary disorder affecting ectoderm-derived tissues including teeth, hair, and sweat glands. The dental abnormalities associated with HED, such as oligodontia and conical teeth, often result in significant functional, esthetic, and psychosocial challenges, particularly during childhood. Methods: A 10-year-old child presented with psychosocial concerns related to missing and malformed teeth. Clinical examination revealed oligodontia, conical anterior teeth, and a resorbed mandibular ridge. Based on clinical findings and a positive family history, a diagnosis of HED with significant dental involvement was confirmed. Results: A conservative prosthodontic approach was selected. A maxillary overdenture was fabricated over the retained primary teeth to enhance retention and preserve the alveolar bone, and a resin-bonded bridge was placed in the mandible due to poor ridge anatomy. The treatment restored oral function and esthetics and improved the child’s self-esteem. A recall visit after three months confirmed good prosthesis adaptation and a positive response from the patient and parents. Conclusions: This case highlights the importance of early, conservative, and developmentally appropriate prosthetic rehabilitation in pediatric patients with HED. Interim prostheses can significantly improve oral function, appearance, and psychosocial well-being while preserving future treatment options as the child matures. Full article

Background: Patient satisfaction is a critical outcome in the rehabilitation of edentulous patients. While conventional fabrication methods are widely used, digital workflows are emerging as viable alternatives. However, direct comparative evidence from the patient’s perspective remains limited. Objective: To compare patient satisfaction between conventional complete dentures (C-CD) and digital complete dentures (D-CD) in maxillary edentulous patients, including changes in perceptions over time and final prosthesis preference. Methods: A prospective, randomized crossover clinical trial was conducted in 2023–2024 involving 40 completely maxillary edentulous patients meeting specific inclusion criteria. Participants were randomly allocated into two sequence groups: Group 1 (n = 20) received C-CD first, and Group 2 (n = 20) received D-CD first, each for 6 months (T1), followed by crossover to the alternate denture for another 6 months (T2). Patient satisfaction was measured using a 10-item questionnaire at 6 and 12 months. Statistical analysis: Wilcoxon signed-rank tests were used for within-subject comparisons of denture types, and Mann–Whitney U tests for between-group comparisons, with significance set at p ≤ 0.05. Results: Using the paired crossover analysis, D-CD showed significantly better comfort than C-CD (p < 0.05). D-CD scored significantly higher than C-CD in most satisfaction domains, including comfort, retention, speech, esthetics, and need for adjustments (p ≤ 0.05). Median scores for retention, speech, esthetics, and other domains were slightly higher with D-CD but did not reach statistical significance (p > 0.05). Additionally, the D-CD required fewer post-insertion adjustment visits than the C-CD (p < 0.05). By the end of the trial, 28 patients (70%) preferred the digital denture as their final prosthesis, whereas 12 patients (30%) preferred the conventional denture. Conclusions: Incorporating digital technology in the fabrication of complete dentures significantly enhances patient satisfaction compared to conventional methods. This study highlights the clinical relevance of modern dental prosthesis technology and supports the wider integration of digital workflows. Within the limitations of this pilot study, digitally fabricated complete dentures provided overall patient satisfaction comparable to conventional dentures, with the D-CD offering a notable improvement in comfort. The majority of patients ultimately favored the digital denture, supporting the clinical viability of CAD/CAM workflows. Full article

Background/Objectives: This retrospective study assessed the accuracy of implant positioning with dynamic computer-aided implant surgery (dCAIS) for Toronto Bridge fabrication, using a conometric prosthetic concept and a new intraoral splinting technique (CLIKSS). It compared discrepancies across various anatomical regions, bone qualities, and implant sites. Methods: This study involved 52 patients undergoing full-arch rehabilitation (17 in the mandible, 30 in the maxilla, and 5 in both), with 366 implants placed (125 in the mandible, 241 in the maxilla; 128 in post-extraction sites, and the remainder in healed sites). All implants were immediately loaded. Precision was assessed by measuring linear and three-dimensional (3D) angular deviations between planned and actual implant positions. Results: Measurement errors for apical linear and 3D deviations at the apex and entry point ranged from 0.24 ± 0.10 to 0.55 ± 0.57 mm, and angular deviations varied from 0.32 ± 0.65° to 0.35 ± 0.71°. Maxillary measurements were significantly higher at the entry, apical, and vertical levels, even when comparing anterior and posterior regions with the corresponding mandibular areas, while no differences were found in the angular deviation. Significant discrepancies were observed among different mandibular bone types. Maxillary post-extraction sites exhibited significantly greater deviations than mandibular sites in all parameters except angular deviation. No significant differences were found between healed and post-extraction sites within the same jaw. Conclusions: dCAIS improved implant placement accuracy, leading to predictable prosthetic outcomes, especially during parallel multi-implant insertions. This report introduced dCAIS for conometric/biconometric implant placement combined with the innovative CLIKSS technique as an effective intraoral split method for this prosthesis connection. Full article

Background: In recent years, thanks to the improvement of adhesive techniques, patients affected by tooth wear, related to erosion and/or parafunctional habits, can undergo restoration by adding only what has been lost of their dentition (additive approach). However, since not all clinicians are convinced that dental rehabilitation should be proposed in the early stages of exposed dentin, several treatments are often postponed. It is important to emphasize that, in the early stages, the clinical approach should remain conservative, focusing on dietary counseling, the modification of harmful habits, fluoride application, and risk factor management. Only when these preventive and non-invasive strategies prove insufficient, and the condition continues to progress, should invasive restorative treatments be considered. Unfortunately, epidemiological studies are reporting an increase in the number of young patients affected by erosive tooth wear, and not intercepting these cases earlier could lead to a severe degradation of the affected dentition. In addition, parafunctional habits are also becoming more frequent among patients. The combination of erosion and attrition can be very destructive, and may progress rapidly once dentin is exposed and the risk factors remain unaddressed. The aim of this report was to present a conservative full-mouth rehabilitation approach for severe erosive lesions and to provide a 10-year follow-up assessing the biological, functional, and esthetic outcomes. Methods: In this article, the postponed restorative treatment of a patient, suffering from severe tooth wear, is illustrated. The patient had sought dental treatment in the past; however, due to the already very compromised dentition, a conventional but very aggressive treatment was proposed and refused. Four years later, when the patient finally accepted an alternative conservative therapy, the tooth degradation was very severe, especially at the level of the maxillary anterior teeth. The combination of three different approaches, Speed-Up Therapy, BOPT (Biologically-Oriented Preparation Technique), and the 3 Step Technique, however, improved the capacity to successfully complete the difficult therapeutic task. Results: The biological goals (maintenance of the pulp vitality of all of the teeth and the minimal removal of healthy tooth structure) were accomplished, relying only on adhesive techniques. Conclusions: The overall treatment was very comfortable for the patient and less complicated for the clinician. At 10-year follow-up, biological, functional, and esthetic success was still confirmed. Full article

Background: The rehabilitation of complex bone defects in the anterior maxilla presents significant challenges in restoring both function and esthetics. A multidisciplinary approach integrating guided bone regeneration (GBR) and connective tissue grafting (CTG) has proven effective in addressing such cases. Methods: This report describes the case of a 60-year-old female patient who presented with severe alveolar ridge resorption and peri-implant bone loss, necessitating an advanced regenerative strategy. The treatment protocol involved the use of autologous and xenogeneic bone grafts in combination with hyaluronic acid and polynucleotides to enhance osteogenesis and tissue integration. A six-month healing period was observed before histological and clinical evaluations were conducted. Results: The results demonstrated a significant increase in lamellar bone formation and vascularization in sites treated with biomodulators compared to conventional GBR techniques. Subsequently, CTG was employed to optimize peri-implant soft tissue volume and stability, leading to improved keratinized tissue thickness and enhanced esthetic outcomes. This case underscores the importance of a comprehensive surgical and prosthetic plan that integrates bone regeneration with mucogingival management for optimal results in implant rehabilitation. Additionally, histological analysis revealed that the incorporation of hyaluronic acid and polynucleotides resulted in improved cellular activity, reduced inflammatory responses, and enhanced overall bone quality. Conclusions: These results highlight the potential role of biomodulators in regenerative procedures. While the findings suggest promising clinical applications, further long-term studies are necessary to validate the outcomes and establish standardized protocols for the integration of advanced biomaterials in implantology. Full article

Background and Clinical Significance: To describe the effectiveness of alveolar ridge preservation under the radiological and histological analysis of a customized resorbable scaffold three-dimensionally printed with polycaprolactone (PCL) reinforced with a coating of a copolymer of polycaprolactone-block-polyethylene glycol (PCL–PEG) by electrospray. Case Presentation: A 62-year-old male with vertical root fractures of teeth #14 and #15. From the cone beam CT (CBCT) image, the scaffold root replicas were designed with the shape of the roots and printed with PCL coated with PCL–PEG by electrospray. The scaffold was inserted into the alveolar bone and maintained with a tension-free flap closure. After six months, a CBCT of the surgical site and histological analysis of a bone sample at the dental implant installation site were performed. After 6 months, the wound in tooth #14 was closed, clinically proving no adverse reaction or complications. The histological analysis of the bone sample showed new bone formation with lamellar structure, Haversian canal structure, and osteocyte spaces. However, the scaffold in tooth #15 was exposed and not osseointegrated, and it was covered with membranous tissue. Histologically, the sample showed tissue compatible with lax connective tissue with mixed inflammatory infiltrate. In tooth #14, the dental implant presented an insertion torque >35 Ncm and was rehabilitated three months after its installation. Conclusions: Three-dimensional printed PCL scaffolds showed the ability to regenerate vital and functional bone with osseointegration capability for maxillary bone regeneration and oral rehabilitation based on dental implants. A case of inadequate scaffold osseointegration accompanied by lax connective tissue formation is shown. Full article

Background and Objectives: This study aimed to evaluate marginal bone level (MBL) changes in implant-supported rehabilitation based on patient demographics, implant location, transmucosal abutment height, and crown emergence profile. Materials and Methods: A total of 50 patients (28 females and 22 males), with 111 implant–abutment (IA) sets, were analyzed. The mean age was 65.2 ± 10.9 years (range: 33–81). Implants were placed in the maxilla (68.5%) and mandible (31.5%), with an average evaluation period of 12.7 ± 4.1 months. MBL changes at mesial (MBLm) and distal (MBLd) sites were recorded and analyzed based on sex, age, implant location, abutment transmucosal height, and crown emergence profile. Statistical comparisons were performed using Bonferroni’s multiple comparison test and one-way ANOVA with Tukey’s post hoc test. Results: MBL changes did not show significant differences based on sex (p > 0.05) or age group (p > 0.05). However, maxillary implants exhibited greater bone loss than mandibular implants, though this difference was not statistically significant. Transmucosal abutment height (TMh) significantly influenced MBL, with taller abutments (TMh3: −1.07 ± 0.93 mm) showing less bone loss than shorter abutments (TMh1: −2.11 ± 1.82 mm) (p < 0.05). Crown emergence profile also affected MBL, particularly in the distal emergence profile, where design 1 exhibited the least bone loss compared to designs 2 and 3 (p = 0.0176). Conclusions: The study findings suggest that transmucosal abutment height and crown emergence profile significantly influence peri-implant bone stability. Transmucosal abutment height (> 2.5 mm) was associated with reduced bone loss. Further research is recommended to evaluate the long-term effects on peri-implant bone maintenance. Full article

Background: Orbital floor blowout fractures (OFBF) can have serious consequences for the patient. Selecting the right treatment method and materials is essential. Krenkel’s maxillary sinus implant has been used successfully for more than 40 years in clinical practice. The aim of this study was to evaluate the long-term outcome of this implant compared to polydioxanone (PDS) sheets. Material and methods: This retrospective study examined a cohort of 82 OFBF patients over a seven-year period. Clinical and geometric data were collected. Defect size, location, and the volume of the herniated tissue were measured from conventional computer tomography (CT) or cone beam computer tomography (CBCT) scans. The relationship between ophthalmologic rehabilitation and treatment modality was analyzed using logistic regression. Results: The study included 82 patients, 28% female and 72% male, with a median age of 45.2 years. Defect size and hernia volume correlated with preoperative ophthalmological symptoms. At follow-up, 14.8% in the implant group and 28.6% in the PDS group showed mild visual impairment, with no severe diplopia. Conclusions: Our results suggest this method is a reliable and effective solution for repairing OFBFs and ophthalmologic rehabilitation. However, further research in a clinical controlled trial is needed. Full article

Background/Objectives: Guided bone regeneration (GBR) is a regenerative technique used to treat maxillary osseous defects to enable implant placement for prosthetic rehabilitation. It is generally performed with the use of barrier membranes and bone substitute materials of human or animal origin. Here, we report the clinical and histological outcomes of a horizontal GBR, treated using only synthetic biomaterials. Methods: A graft of nanocrystalline hydroxyapatite (NH) embedded in a silica gel matrix was used to fill a horizontal bone defect. The graft was covered with a titanium-reinforced dense polytetrafluoroethylene (TR-dPTFE) membrane, and primary closure was completed and maintained for 10 months. Then, the site was re-opened for membrane removal and implant insertion. During implant bed preparation, a bone biopsy was obtained for histological evaluation. A metal–ceramic crown was fitted, and the 5-year follow-up after prosthetic loading showed clinical and radiographically healthy tissues. Results: Histological examination revealed good integration of the biomaterial into the surrounding tissues, which were composed of lamellar bone trabeculae and connective tissue. New bone formation occurred not only around the NH granules but even inside the porous amorphous particles. Conclusions: The combination of NH and the TR-dPTFE membrane produced good clinical and histological results, which remained stable for 5 years. Full article

Background: As the rehabilitation of the upper anterior maxilla primarily requires high predictability of successful aesthetic outcomes, procedures of immediate implant placement are frequently employed. The aim of this pilot study was to retrospectively evaluate the short-term outcomes of a protocol of immediate implant placement in fresh extraction sockets, followed by immediate non-functional provisional restorations. Methods: Patients were treated for the replacement of maxillary central or lateral incisors, or cuspid teeth with a single-crown locking-taper implant. Clinical and photographic records were retrospectively compared between the teeth prior to extraction (T0) and restorations one year after prosthetic loading (T1). Outcomes were analyzed using the Pink Esthetic Score (PES), according to the patient’s phenotype (thin/thick), with or without the use of connective tissue graft (CTG). Results: The overall mean PES of 25 implants treated was 9.24 ± 2.36 at T0 and 9.60 ± 1.70 at T1. Comparison of groups between T0 and T1 revealed significant PES variations (p = 0.04), with the best and the worst scores, respectively, registered for thin + CTG group (from 7.50 ± 1.91 to 9.75 ± 2.87) and thin group (from 11.33 ± 2.33 to 10 ± 0.89); moderate increases were assessed for thick group (from 8.44 ± 2.40 to 9.44 ± 2.12) and thick + CTG group (from 9.50 ± 1.04 to 9.33 ± 0.81). Conclusions: Within the limits of a short-term analysis of a small number of patients, immediate implant rehabilitation for aesthetic areas of the upper maxilla can be assumed as a safe and predictable protocol. Concomitant use of CTG seems to provide beneficial effects in thin phenotypes, not any additional value in thick phenotypes. Full article

Background/Objectives: The satisfaction of patients following maxillary full-arch rehabilitation is crucial in assessing treatment effectiveness. This one-year study evaluated patients’ satisfaction, quality of life, and aesthetic perception after receiving the Maxilla-for-All^®/All-On-X treatments, which combine standard, pterygoid, trans-sinus, and zygomatic implants to support a fixed prosthesis and offer a graftless solution that reduces morbidity and treatment time. Methods: A prospective cohort study using convenience sampling of subjects treated for severe maxillary atrophies was conducted on patients receiving immediate implant-supported full-arch fixed prostheses. The Oral Health Impact Profile (OHIP-14) and Psychosocial Impact of Dental Aesthetics Questionnaire (PIDAQ-23) were administered preoperatively and one year post-treatment. Patients were grouped based on the presence or absence of complications (surgical, technical, and mechanical) and Wilcoxon tests were used for comparison (significance level = 0.05). Results: A total of 56 patients (29 female, 27 male) participated, with no implant or prosthesis failures. Eleven patients reported unilateral sinus membrane perforation, and seven had technical or mechanical complications. Preoperatively, 69% of patients rated their oral condition as unfavorable according to the OHIP-14; this dropped significantly to 21.8% post-treatment (p-value < 0.0001). After one year, the average PIDAQ-23 score improved significantly from 44.7 ± 16.6 to 6.8 ± 5.3 (p-value < 0.0001). No significant differences were observed between patients with or without complications (p-values ranging from 0.5270 to 0.8920). Conclusions: Full-arch rehabilitation using Maxilla-for-All^®/All-On-X treatments significantly improved both aesthetic perception and chewing function in patients with severe maxillary atrophies. They reported a substantial reduction in oral health-related discomfort, as shown by a significant decrease in OHIP-14 scores one year post-treatment. Clinical or technical complications did not significantly impact patients’ quality-of-life outcomes or satisfaction, supporting the reliability of this treatment protocol. Full article

Implant–prosthetic rehabilitation of the posterior edentulous maxilla is challenging due to inadequate bone volume resulting from alveolar ridge resorption and maxillary sinus pneumatization. This study explores the use of hyaluronic acid (HA) as a biomaterial in maxillary sinus elevation, particularly in combination with a fluid dynamic approach, as an alternative to traditional lateral approaches and granular biomaterials. Methods: A prospective study was conducted on 58 patients with posterior maxillary edentulism. Preoperative CBCT scans assessed residual bone height and sinus width. A minimally invasive surgical protocol utilizing a device for fluid-dynamic membrane elevation and injection of 2% cross-linked hyaluronic acid was employed, followed by simultaneous implant placement. Postoperative follow-up included a CBCT scan at 12 months to evaluate new bone height, measured mesially and distally. Implant stability was assessed using resonance frequency analysis at second-stage surgery. Results: A significant increase in bone height was observed at 12 months post-surgery, with an average bone gain of 7.5 mm. All 58 implants achieved primary stability, and no implant failures or signs of peri-implantitis were noted during the follow-up period. Higher bone gain was observed in wider sinuses. Conclusions: The fluid-dynamic transcrestal sinus floor elevation technique combined with hyaluronic acid appears to be a minimally invasive and effective method for achieving significant bone regeneration in the posterior maxilla, facilitating implant–prosthetic rehabilitation with potentially low risks and morbidity. Further large-scale studies are warranted to validate these findings across diverse clinical scenarios. Full article

Background/Objectives: This systematic review and meta-analysis evaluates the surgical, functional, and aesthetic outcomes of scapular free flaps in maxillary reconstruction. The primary objective is to assess early surgical complications, fistula formation, donor site morbidity, dental restoration, normal dietary intake, aesthetic compromise, and eye-related issues. Secondary objectives include total free flap necrosis, the need for revision procedures, and functional performance of the upper limb. Methods: A systematic review was conducted following the PRISMA guidelines. Eligible studies were identified by searching PubMed/MEDLINE, Cochrane Library, Scopus, and Google Scholar, with the last search conducted on 10th February 2025. Inclusion criteria were studies reporting on patients undergoing maxillary reconstruction with scapular free flaps, and which provided data on at least one of the primary or secondary outcomes. A single-arm meta-analysis was performed to assess the outcomes of scapular free flap reconstruction. The risk of bias was assessed using the Newcastle–Ottawa Quality Assessment Scale, with two independent reviewers performing the assessment. Results: From an initial search of 310 articles, 6 studies were included in the qualitative and quantitative synthesis, encompassing 231 patients with a mean age of 52.9 years (95% CI 44.9–60.8). Early general surgical complications occurred in 24% (95% CI 13–40) of patients, while 12% (95% CI 4–31) experienced fistula formation. Donor site morbidity was reported in 10% (95% CI 6–17) of cases, with a mean DASH score of 10.49, indicating low upper limb impairment. Dental rehabilitation was achieved in 56% (95% CI 42–70), and 52% (95% CI 31–72) of patients resumed a normal diet. Aesthetic compromise was observed in 27% (95% CI 9–58), and 36% (95% CI 28–44) reported eye-related issues. Conclusions: Scapular free flap is a reliable option for maxillary reconstruction with favourable outcomes, particularly in complex composite defects requiring both bone and soft tissue reconstruction. However, the evidence is limited by risk of bias, significant heterogeneity, and imprecision due to the small number of studies and participants. Larger, more robust trials are needed to confirm these findings. Full article

Background/Objective: Diagnostic trial restorations play a crucial role in restorative dentistry by allowing clinicians to evaluate aesthetics, function, and phonetics before finalizing definitive restorations. These restorations facilitate communication between patients, clinicians, and dental technicians, ensuring treatment alignment and predictable outcomes. The accuracy of transferring diagnostic trial restorations to the oral cavity is essential to maintain the integrity of the planned design. Various fabrication techniques, including conventional silicone matrices and computer-aided design/computer-aided manufacturing (CAD-CAM)-based methods, have been developed to improve transfer precision. However, there is limited evidence directly comparing their dimensional accuracy. This randomized in vivo study aimed to evaluate and compare the accuracy of four commonly used techniques—condensation silicone, addition PVS silicone, transparent PVS silicone, and CAD-CAM combination matrices—by assessing their linear and volumetric discrepancies. Methods: Twenty patients requiring aesthetic rehabilitation of their anterior maxillary teeth participated. The sequence of matrix usage was determined through randomization. Four techniques for transferring diagnostic trial restorations were evaluated: (1) condensation silicone matrix, (2) addition polyvinyl siloxane (PVS) silicone matrix, (3) transparent PVS silicone matrix, and (4) CAD-CAM combination matrix. Dimensional accuracy was assessed by comparing intraoral scans (IOSs) of the transferred restorations to the original diagnostic wax-up. Linear discrepancies were measured at four buccal landmarks (cervical, medial, lower medial, and incisal), and volumetric deviation was evaluated using reverse engineering alignment software. Results: Significant differences were observed among the groups in both linear and volumetric discrepancies (p < 0.05). The CAD-CAM combination matrix showed superior volumetric accuracy, with minimal deviations from the diagnostic wax-up. The addition PVS silicone matrix demonstrated consistent linear accuracy, particularly at the cervical and medial landmarks. The condensation silicone matrix exhibited moderate performance across both linear and volumetric accuracy. The transparent PVS silicone matrix showed the highest variability, with greater volumetric deviations. Conclusions: The study highlights that the choice of matrix material and technique significantly impacts the dimensional accuracy of diagnostic trial restoration transfers. The CAD-CAM combination matrix and the addition PVS silicone matrix demonstrated superior advantages compared to the other techniques. Clinicians should consider the specific requirements of each case, including accuracy and ease of use, when selecting a transfer technique for aesthetic rehabilitations. Full article