Search Results (15)

Background: Supplemental teeth are a rare subtype of supernumerary elements that closely resemble the morphology of normal dentition. Their occurrence in the mandibular anterior region is extremely uncommon. Aim: To describe the clinical features, diagnosis, and phased orthodontic management of a rare case involving bilateral supplemental mandibular incisors in a pediatric patient. Case report: A 7-year-old female patient presented with early mixed dentition and significant lower anterior crowding due to the presence of two fully erupted supplemental mandibular incisors. Treatment phase I included extraction of the malpositioned supplemental teeth and rapid maxillary expansion to transversally coordinate the arches. By the end of phase I, spontaneous alignment of the remaining lower incisors was observed. Discussion: The presence of two supplemental mandibular incisors is extremely rare in Caucasian populations. Supernumerary teeth can cause crowding, impaction, or delayed eruption of adjacent permanent teeth. Timely extraction can prevent such complications and often allows spontaneous alignment. Conclusions: The prompt removal of supplemental mandibular incisors, when they have just erupted, might lead to the alignment of the other incisors, considering that they spontaneously occupy the extractive spaces often without the aid of fixed appliances first line. Full article

Pediatric obstructive sleep apnea (OSA) is a highly prevalent, multifactorial, and often underdiagnosed condition with significant consequences for cognitive and behavioral development. Early detection and timely multidisciplinary interventions are essential, particularly in children with craniofacial anomalies or syndromes associated with increased OSA risks, to prevent long-term complications. This narrative review explores the orthodontists’ role in the interdisciplinary management of pediatric OSA, focusing on early screening for craniofacial risk factors and implementing interceptive orthodontic interventions that support favorable airway development and growth modulation. Through early and frequent interaction with pediatric patients, orthodontists are well-positioned to identify clinical signs of airway-related abnormalities and craniofacial risk factors such as mandibular and maxillary retrognathism, maxillary constriction, and high-arched palatal vaults. Orthodontic interventions such as rapid maxillary expansion (RME), mandibular advancement, and myofunctional therapy may improve airway patency in selected cases. These approaches should be coordinated and integrated within the multidisciplinary team, including orthodontists, pediatricians, sleep specialists, ENT specialists, and speech-language pathologists. Furthermore, caregivers’ involvement and patients’ compliance are keys to success. Despite encouraging clinical observations, current evidence is limited by heterogeneity and a lack of long-term outcome data. Future research should prioritize well-designed prospective trials, explore the effectiveness of combined therapeutic strategies, and support the development of standard diagnostic protocols. Equally important is a stronger focus on early diagnosis and preventive measures to enhance patient outcomes and long-term treatment strategies. Integrating orthodontists into early OSA care is essential for optimizing outcomes and reducing long-term morbidity. Full article

Background/Objectives: Previous studies on clear aligner therapy (CAT) in mixed dentition primarily focused on the predictability of maxillary arch expansion. However, limited evidence is available regarding mandibular arch changes, particularly in relation to inter-arch coordination. This study aims to evaluate the effectiveness and predictability of dental expansion in both the upper and lower arches using Invisalign First^® aligners. Methods: A retrospective analysis was conducted with 15 participants. Dental expansions were assessed before and after treatment using iTero intraoral scans processed with 3D analysis software. Measurements were compared to the predicted movements planned in ClinCheck^®. Data normality was verified (Shapiro–Wilk test), descriptive statistics were calculated, and paired t-tests were performed to compare clinical and predicted expansions, with significance set at 0.05. Results: Clear aligners achieved effective dento-alveolar expansion in both arches. Predictability was higher at the cusp level than at the gingival level, indicating a tendency toward tipping movements rather than bodily expansion. The study also highlighted mandibular expansion outcomes and gingival-level discrepancies, providing new insights compared to the previous literature. Minor differences between predicted and achieved movements were observed, partly attributable to natural growth and deciduous tooth exfoliation. Conclusions: Clear aligners are effective in achieving maxillary and mandibular arch expansion in mixed dentition, with good predictability at the coronal level. Overengineering buccal root torque may help promote bodily expansion and reduce cuspal–gingival discrepancies. Further studies with larger sample sizes are needed to optimize treatment planning and predictability. Full article

Class III malocclusion prevalence varies significantly among racial groups, with the highest prevalence observed in southeast Asian populations at 15.80%. These malocclusions often involve maxillary retrognathism, mandibular prognathism, or both, accompanied by maxillary constriction and crossbites. Comprehensive treatment should address anteroposterior, transverse, and vertical imbalances. Microimplant-assisted rapid palatal expansion (MARPE) has shown high success rates for transverse maxillary expansion in late adolescents and adults, presenting a viable alternative to surgically-assisted rapid palatal expansion (SARPE). This case report aims to demonstrate the successful treatment of a young adult female with borderline Class III malocclusion using MARPE and mandibular backward rotation (MBR) techniques. A 21-year-old female presented with a Class III skeletal pattern, anterior/posterior crossbites, and mild dental crowding. Despite her concerns about a concave facial profile, the patient declined orthognathic surgery due to a negative experience reported by a friend. The treatment plan included MARPE to correct maxillary transverse deficiency and MBR to alleviate Class III malocclusion severity. Lower arch distalization was performed using temporary anchorage devices (TADs) on the buccal shelves, and Class II elastics were used to maintain MBR and prevent retroclination of the lower labial segment during anterior retraction. Significant transverse correction was achieved, and the severity of Class III malocclusion was reduced. The lower dentition was effectively retracted, and the application of Class II elastics helped maintain MBR. The patient’s final facial profile was harmonious, with well-aligned dentition and a stable occlusal relationship. The treatment results were well-maintained after one year. The MARPE with MBR approach presents a promising alternative for treating borderline Class III cases, particularly for patients reluctant to undergo orthognathic surgery. This case report highlights the effectiveness of combining MARPE and MBR techniques in achieving stable and satisfactory outcomes in the treatment of Class III malocclusion. Full article

Background: This systematic review aims to analyze the spontaneous dentoalveolar changes in the mandibular arch after maxillary expansion in growing patients obtained with different expansion protocols: Rapid Maxillary Expansion (RME), Slow Maxillary Expansion (SME), and Leaf Expander. Methods: The study adhered to the Preferred Reporting Items for Systematic Review and Meta-Analysis (PRISMA) guidelines. Eligibility criteria were established in the PICO format, involving patients who underwent slow, rapid, or leaf maxillary expansion during the mixed or early permanent dentitions. A comprehensive search of electronic databases and manual searches was conducted up to December 2023. The outcome measures included inter-mandibular first permanent molar width, inter-deciduous molar and canine width, arch perimeter, and arch length; both short- and long-term results were considered. The articles that met the inclusion criteria were included in this systematic review and were qualitatively evaluated using a methodological quality scoring system with a 13-point scale. To assess the inter-examiner agreement concerning the article selection and the qualitative assessment of the included studies, Kappa statistics were computed. Results: A total of 1184 articles were identified through electronic and manual searches. After the removal of duplicates and the initial examination of the titles and abstracts, 57 articles were considered for the full text analysis, and according to the eligibility and exclusion criteria, 22 studies were finally selected, composed of 8 randomized controlled trials (RCTs) and 14 retrospective/case-control studies. The qualitative assessment of the included studies showed the following scores: 6 papers have high research quality, 5 have moderate quality, and 11 have low quality. SME demonstrated negligible mandibular changes, with less than 1 mm variation on average (range 0.46–2.00 mm) in the selected parameters and relapses observed in the long term. RME induced more significant increases, particularly in intermolar width greater than 1 mm, which ranged between 0.93 and 3.3 mm, and good stability over the long term. Leaf Expander exhibited promising short-term lower intermolar width increases greater than 1 mm and ranged from 0.5 to 1.69 mm, but long-term stability was not thoroughly evaluated. Conclusions: SME results in negligible short- and long-term effects, while RME, especially with Haas-type appliances, exhibits significant intermolar width increases that remain stable over the years. Leaf Expander shows short-term lower intermolar width increases, requiring further investigation into long-term stability. Full article

Background: To investigate the accuracy of an F22 Aligner system, considering the amount of prescribed movement, tooth type, grip points, sex and age. Methods: Digital models of 120 patients (64 females and 56 males; mean age 35.2 years ± 7.4) affected by mild-to-moderate Class I malocclusion and treated via F22 Aligners, retrospectively selected from the University of Ferrara Orthodontics Clinic’s electronic database; post-treatment models were generated, and three angular values per tooth and four linear intra-arch measurements per arch were acquired. For angular measurements, planned (T1) and achieved (T2) values were obtained thorough digital model superimpositions. Linear measurements were acquired from pre-treatment, reference and post-treatment models. Statistical comparisons were performed to assess accuracy among tooth types and prescribed movements, tooth type, grip points, sex and age were investigated via chi-squared automatic interaction detection regression trees. Results: Mean accuracy for inclination and angulation were 86.76% and 88.01%, respectively, whereas rotation was less accurate (61.59%), especially for rounded teeth. All variables investigated influenced accuracy, with the exception of inclination, which was only influenced by age. Regarding linear measurements, good expansive capacity was shown, except for the distance between mandibular second premolars. Conclusions: F22 aligners are a viable solution for the treatment of Class I malocclusion of mild-to-moderate complexity, although clinicians should bear in mind the lower predictability of rotation, as well as the influence of the variables investigated. Full article

The Invisalign^® system (SmartForce^® G8) aims to guarantee aesthetics and provide good orthodontic treatment results. Dentoalveolar expansion is possible with clear aligners and can be used to correct dentoalveolar crossbite, resolve crowding or modify the arch shape. Despite the treatment’s effectiveness, there is still disagreement among professionals concerning its true clinical potential. This study aimed to analyze the effectiveness and predictability of coronal tooth expansion movement in permanent dentition in patients who had completed the first phase of treatment with Invisalign^® orthodontic aligners. Materials and Methods: The tooth movement tables of 75 previously selected cases were analyzed in terms of dental-arch width and expansion efficiency, through the Invisalign^® platform, considering the pre-treatment (T0), planned treatment (TP) and post-treatment models (T1) using ClinCheck Pro^® 6.0 software. All patients were treated by an orthodontic specialist and Invisalign^® Diamond Provider in a private practice (T.P.). Results: Difference between T1 and T0: for each maxillary and mandibular measurement, there was a statistically significant difference between pre- and post-aligner treatment values. The greatest amount of expansion occurred in both the upper and the lower premolars. Difference between TP and T1: for each maxillary measurement, statistically significant differences were verified for the molar and canine. At the mandibular level, statistically significant differences were only verified in the first molar. Conclusions: The Invisalign^® clear aligners are effective for simultaneous intra-arch expansion in both jaws. Full article

Background: Crowding is the most frequent malocclusion in orthodontics, with a strong hereditary tendency. It already occurs in pediatric age and is mainly hereditary. It is a sign of a lack of space in the arches, and is not self-correcting, but can worsen over time. The main cause of the worsening of this malocclusion is a progressive and physiological decrease in the arch perimeter. Methods: To identify relevant studies investigating the most common possible treatments for mandibular dental crowding, a comprehensive search of PubMed, Scopus and Web of Science was conducted encompassing the last 5 years (2018–2023) using the following MeSH: “mandibular crowding AND treatment” and “mandibular crowding AND therapy “. Results: A total of 12 studies were finally included. An orthodontic treatment cannot ignore the concept of “guide arch”, which concerns the lower arch, because of the objective difficulty in increasing its perimeter; the bone structure of the lower jaw is more compact than that of the upper one. Its expansion, in fact, is limited to a slight vestibularization of the incisors and lateral sectors that may be associated with a limited distalization of the molars. Conclusions: There are various therapeutic solutions available to the orthodontist, and a correct diagnosis through clinical examination, radiographs and model analysis are essential. The decision of how to deal with crowding cannot be separated from an overall assessment of the malocclusion to be treated. Full article

Aim: The upper jaw transverse deficit is certainly one of the most common clinical issues in the orthodontic field. It can be due to skeletal or dental factors, and its etiology may be both genetic and environmental. Rapid maxillary expanders (RMEs) are certainly the most effective appliance for upper transverse deficiency correction. The aim of this study was to evaluate the changes that occurred in the mandibular arch during treatment with RMEs in growing subjects by analyzing tridimensional lower digital casts. Materials and Methods: The study group (SG) consisted of 20 subjects (10 M, 10 F; mean age 9.4 ± 2.8 years old) randomly selected at the Department of Orthodontics at the University of Rome, “Tor Vergata”. The inclusion criteria were negative posterior transverse interarch discrepancy ≥ 4 mm, mixed dentition phase with first permanent molars erupted, and prepubertal skeletal maturation stage (CS1-2), evaluated on a lateral radiograph through the Cervical Vertebral Maturation method. The SG was compared to an untreated control group (CG) of 20 subjects (10 M, 10 F, mean age 8.7 ± 2.3 years old) enrolled with the same inclusion criteria. The SG was treated by using RMEs. Dental casts of the lower arch were taken at two different times (T0–T1 = 6 months). All the dental casts were scanned with an OrthoXscan (Dentaurum 6mmbh E Co., Ispringen, Germany) and twenty points on the mandibular arch were digitized using Viewbox software. A Student t-test was used to compare the means of the quantitative variables associated with the effect of the device over time T0 and T1. Results: The results show a statistically significant increase (p < 0.05) in the intercanine and the intermolar diameters between the times T0 and T1 when compared to the CG. Conclusions: Rapid maxillary orthopedic expansion may achieve an increase in mandibular intercanine and intermolar diameter. Full article

The aim of this study was to compare the crossbite correction of a group (n = 43; f/m 19/24; mean age 27.6 ± 9.5 years) with surgically assisted rapid palatal expansion (SARPE) versus a non-surgical transversal dentoalveolar compensation (DC) group (n = 38; f/m 25/13; mean age 30.4 ± 12.9 years) with completely customized lingual appliances (CCLA). Arch width was measured on digital models at the canines (C), second premolars (P2), first molars (M1) and second molars (M2). Measurements were obtained before treatment (T₀) and at the end of lingual treatment (T₁) or after orthodontic alignment prior to a second surgical intervention for three-dimensional bite correction. There was no statistically significant difference (p > 0.05) in the amount of total crossbite correction between the SARPE and DC-CCLA group at C, P2, M1 and M2. Maxillary expansion was greater in the SARPE group and mandibular compression was greater in the DC-CCLA group. Crossbite correction in the DC-CCLA group was mainly a combination of maxillary expansion and mandibular compression. Dentoalveolar compensation with CCLAs as a combination of maxillary expansion and mandibular compression seems to be a clinically effective procedure to correct a transverse maxillo-mandibular discrepancy without the need for surgical assistance. Full article

Lip bumper (LB) therapy is used as a treatment approach for mild to moderate crowding without extraction of teeth. Previous studies demonstrated that LB increases arch length through molar uprighting and lateral expansion. However, the effects of LB on mandibular incisors are inconclusive. The controversial results from different studies may be due to limitations including absence of a control group and/or use of 2D radiography. To address this issue, the current retrospective longitudinal CBCT study compared a rapid maxillary expansion (RME) group with no lower treatment [16 patients (9 females, 7 males); median age 8.86 years at T1 and 11.82 years at T2] and an RME + LB group [18 patients (13 females, 5 males); median age 9.46 years at T1 and 12.10 years at T2]. The CBCTs taken before and after phase 1 treatment were 3D superimposed based on the mandibular structure and were measured to determine the angular and linear changes of the mandibular incisors over the course of LB treatment. For comparisons between different timepoints within a group, a Wilcoxon matched-pairs signed rank test was used. For intergroup comparisons, a Mann–Whitney U test was used. Both groups showed eruption and protrusion of the mandibular incisors during the observation period, while there was no significant change in proclination of the lower incisors. When comparing the discrepancy of change between groups, there was no statistically significant difference detected. In summary, by utilizing a longitudinal 3D database, the current study demonstrated that the effect of LB on the position of the mandibular incisors is limited. Full article

Background and objectives: Dental crowding is more pronounced in the mandible than in the maxilla. When exceeding a significant amount, the creation of new space is required. The mandibular expansion devices prove to be useful even if the increase in the lower arch perimeter seems to be just ascribed to the vestibular inclination of teeth. The aim of the study was to compare two activation protocols of the Schwartz appliance in terms of effectiveness, particularly with regard to how quickly crowding is solved and how smaller is the increasing of vestibular inclination of the mandibular molars. Materials and Methods: We compared two groups of patients treated with different activation’s protocols of the lower Schwartz appliance (Group 1 protocol consisted in turning the expansion screw half a turn twice every two weeks and replacing the device every four months; Group 2 was treated by using the classic activation protocol—1/4 turn every week, never replacing the device). The measurements of parameters such as intercanine distance (IC), interpremolar distance (IPM), intermolar distance (IM), arch perimeter(AP), curve of Wilson (COW), and crowding (CR) were made on dental casts at the beginning and at the end of the treatment. Results: A significant difference between protocol groups was observed in the variation of COWL between time 0 and time 1 with protocol 1 with protocol 1 subjects showing a smaller increase in the parameter than protocol 2 subjects. The same trend was observed also for COWR, but the difference between protocol groups was slightly smaller and the interaction protocol-by-time did not reach the statistical significance. Finally, treatment duration in protocol 1 was significantly lower than in protocol 2. Conclusion: The results of our study suggest that the new activation protocol would seem more effective as it allows to achieve the objective of the therapy more quickly, and likely leading to greater bodily expansion. Full article

The aim is to evaluate the effects of slow maxillary expansion on maxillary and mandibular arch, using a slow maxillary expander (SME-Leaf Expander) banded on primary second molar. Ninety patients with transverse maxillary deficiency and posterior crossbite were selected. Sixty-nine patients (33 males/36 females; 7.6 ± 1.7 years old) who underwent SME and 21 patients (10 males/11 females; 7.4 ± 1.2 years old) who were treated with rapid maxillary expander (RME). Digital models obtained pre- and post-treatment at appliance removal (9 to 11 months) were processed by means of a 3D scanner (Trios 3, 3Shape D250 laser, Copenhagen, Denmark). Interdental width in both maxilla and mandible were measured with 3 SHAPE Ortho Analyzer. Four Maxillary and four mandibular interdental width were traced and evaluated. The adequate Student’s t-test (dependent or independent) was used to compare intra and intergroups interdental width differences (p < 0.05). The efficacy of the SME was confirmed both on maxillary and mandibular arch. All the maxillary and mandibular interdental widths increased significantly (p < 0.001). The comparison with the RME group showed significant statistical differences between the two treatments with a greater increase in primary first and second intermolar and canine width for the test group (p < 0.001). SME with Leaf Expander produced statistically significant effects for the correction of transverse maxillary deficiencies with a significant indirect effect on the mandibular arch. Full article

Aim: The treatment of patients with mixed dentition, with inferior moderate dental crowding (the so-called borderline cases, between extraction and expansion) is not yet clear. Two examples of widely used appliances for increasing lower dental arch dimensions are the Schwarz’s appliance and lip bumper. The aim of this prospective study was to compare dental crowding and arch dimensions from pre- to post-treatment with lip bumper versus Schwarz’s appliance. Subjects and Methods: Pre- and post-treatment orthodontic records of twenty subjects (10 males and 10 females) were analyzed in the present study. Inclusion criteria were: first/second molar class malocclusion; crowding of the mandibular arch, from mild to moderate (4–6 mm); mixed dentition; age ≤ 9 years at the beginning of the treatment; stage CS1 or CS2 of maturation of the cervical vertebrae analysis (CVM) at the beginning of the treatment. Ten subjects were treated with a lip bumper, and ten with the removable Schwarz appliance. The primary outcomes were the variations in dental crowding and arch dimensions from pre- to post-treatment. Results: Both the two appliances caused a statistically significant mean improvement/reduction in crowding, of 3.5 mm and 2.9 mm, for the Schwarz appliance and lip bumper, respectively. The Schwarz appliance resulted more effective in increasing arch dimension at the intercanine level, and arch perimeter, while the lip bumper achieves a higher increase in arch length. Conclusions: A lip bumper and Schwarz appliance are both useful in reducing crowding in mixed dentition. This improvement is due to the increase in dental arch dimensions, although the distribution of space resulted slightly differently between the two appliances. Full article

This tutorial outlines the details of the AOCMF image-based classification system for fractures of the mandibular arch (i.e., the non-condylar mandible) at the precision level 3. It is the logical expansion of the fracture allocation to topographic mandibular sites outlined in level 2, and is based on three-dimensional (3D) imaging techniques/computed tomography (CT)/cone beam CT). Level 3 allows an anatomical description of the individual conditions of the mandibular arch such as the preinjury dental state and the degree of alveolar atrophy. Trauma sequelae are then addressed: (1) tooth injuries and periodontal trauma, (2) fracture involvement of the alveolar process, (3) the degree of fracture fragmentation in three categories (none, minor, and major), and (4) the presence of bone loss. The grading of fragmentation needs a 3D evaluation of the fracture area, allowing visualization of the outer and inner mandibular cortices. To document these fracture features beyond topography the alphanumeric codes are supplied with distinctive appendices. This level 3 tutorial is accompanied by a brief survey of the peculiarities of the edentulous atrophic mandible. Illustrations and a few case examples serve as instruction and reference to improve the understanding and application of the presented features. Full article