Search Results (2,166)

Machine learning (ML)-based techniques have received significant attention in various fields of industry and science. In civil and bridge engineering, they can facilitate the identification of specific patterns through the analysis of data acquired from structural health monitoring (SHM) systems. To evaluate the prediction capabilities of ML, this study examines the performance of several ML algorithms in estimating the total weight and location of vehicles on a bridge using strain sensing. A novel framework based on a combined model and data-driven approach is described, consisting of the establishment of the finite element (FE) model, its updating according to load testing results, and data augmentation to facilitate the training of selected physics-informed regression models. The article discusses the design of the Fiber Bragg Grating (FBG) sensor-based Bridge Weigh-in-Motion (BWIM) system, specifically focusing on several supervised regression models of different architectures. The current work proposes the use of the updated FE model to generate training data and evaluate the accuracy of regression models with the possible exclusion of selected input features enabled by the structural specificity of a bridge. The data were sourced from the SHM system installed on a network arch bridge in Wolin, Poland. It confirmed the possibility of establishing the BWIM system based on strain measurements, characterized by a reduced number of sensors and a satisfactory level of accuracy in the estimation of loads, achieved by exploiting the network arch bridge structural specificity. Full article

This study investigated the integration of advanced Atmospheric Water Generators (AWGs) within the design process of building energy systems, focusing on the water–energy nexus in the context of a real-life hospital building. It is based on a simulation approach, recognised as a viable means to analyse and enhance AWG potentialities. However, the current state of research does not address the issue of AWG integration within building plant systems. This study contributes to fill such a research gap by building upon an authors’ previous work and proposing an enhanced methodology. The methodology describes how to incorporate a multipurpose AWG system into the energy simulation environment of DesignBuilder (DB), version 7.0.0116, through its coupling with AWGSim, version 1.20d, a simulation tool specifically developed for atmospheric water generators. The chosen case study is a wing of the Mondino Hospital in Pavia, Italy, selected for its complex geometry and HVAC requirements. By integrating AWG outputs—covering water production, heating, and cooling—into DB, this study compared two configurations: the existing HVAC system and an enhanced version that includes the AWG as plant support. The simulation results demonstrated a 16.3% reduction in primary energy consumption (from 231.3 MWh to 193.6 MWh), with the elimination of methane consumption and additional benefits in water production (257 m³). This water can be employed for photovoltaic panel cleaning, further reducing the primary energy consumption to 101.9 MWh (55.9% less than the existing plant), and for human consumption or other technical needs. Moreover, this study highlights the potential of using AWG technology to supply purified water, which can be a pivotal solution for hospitals located in areas affected by water crises. This research contributes to the atmospheric water field by addressing the important issue of simulating AWG systems within building energy design tools, enabling informed decisions regarding water–energy integration at the project stage and supporting a more resilient and sustainable approach to building infrastructure. Full article

Light Detection and Ranging (LiDAR) provides three-dimensional information that can be used to extract tree parameter measurements such as height (H), canopy volume (CV), canopy diameter (CD), canopy area (CA), and tree stand density. LiDAR data does not directly give diameter at breast height (DBH), an important input into allometric equations to estimate biomass. The main objective of this study is to estimate tree DBH using existing allometric models. Specifically, it compares three global DBH pantropical models to calculate DBH and to estimate the aboveground biomass (AGB) of the Lake Broadwater Forest located in Southeast (SE) Queensland, Australia. LiDAR data collected in mid-2022 was used to test these models, with field validation data collected at the beginning of 2024. The three DBH estimation models—the Jucker model, Gonzalez-Benecke model 1, and Gonzalez-Benecke model 2—all used tree H, and the Jucker and Gonzalez-Benecke model 2 additionally used CD and CA, respectively. Model performance was assessed using five statistical metrics: root mean squared error (RMSE), mean absolute error (MAE), mean absolute percentage error (MAPE), percentage bias (MBias), and the coefficient of determination (R²). The Jucker model was the best-performing model, followed by Gonzalez-Benecke model 2 and Gonzalez-Benecke model 1. The Jucker model had an RMSE of 8.7 cm, an MAE of −13.54 cm, an MAPE of 7%, an MBias of 13.73 cm, and an R² of 0.9005. The Chave AGB model was used to estimate the AGB at the tree, plot, and per hectare levels using the Jucker model-calculated DBH and the field-measured DBH. AGB was used to estimate total biomass, dry weight, carbon (C), and carbon dioxide (CO₂) sequestered per hectare. The Lake Broadwater Forest was estimated to have an AGB of 161.5 Mg/ha in 2022, a Total C of 65.6 Mg/ha, and a CO₂ sequestered of 240.7 Mg/ha in 2022. These findings highlight the substantial carbon storage potential of the Lake Broadwater Forest, reinforcing the opportunity for landholders to participate in the carbon credit systems, which offer financial benefits and enable contributions to carbon mitigation programs, thereby helping to meet national and global carbon reduction targets. Full article

A system of field protective forest belts (FPFBs) was created in the middle of the 20th century in Southern Dobrudzha (Northern Bulgaria) to reduce wind erosion, improve soil moisture storage, and increase agricultural crop yields. Since 2020, prolonged climatic drought during growing seasons and the advanced age of trees have adversely impacted the health status of planted species and resulted in the decline and dieback of the FPFBs. Physiologically stressed trees have become less able to resist pests, such as insects and diseases. In this work, an original new methodology for the integrated assessment of the condition of FPFBs and their protective capacity is presented. The presented methods include the assessment of structural and functional characteristics, as well as the health status of the dominant tree species. Five indicators were identified that, to the greatest extent, present the ability of forest belts to perform their protective functions. Each indicator was evaluated separately, and then an overlay analysis was applied to generate an integrated assessment of the condition of individual forest belts. Three groups of FPFBs were differentiated according to their condition: in good condition, in moderate condition, and in bad condition. The methodology was successfully tested in Southern Dobrudzha, but it could be applied to other regions in Bulgaria where FPFBs were planted, regardless of their location, composition, origin, and age. This methodological approach could be transferred to other countries after adapting to their geo-ecological and agroforest specifics. The methodological approach is an informative and useful tool to support decision-making about FPFB management, as well as the proactive planning of necessary forestry activities for the reconstruction of degraded belts. Full article

Toponyms are fundamental geographical resources characterized by their spatial attributes, distinct from general nouns. While natural language provides rich toponymic data beyond traditional surveying methods, its qualitative ambiguity and inherent uncertainty challenge systematic extraction. Traditional toponym recognition methods based on part-of-speech tagging only focus on the surface-level features of words, failing to effectively handle complex scenarios such as alias nesting, metonymy ambiguity, and mixed punctuation. This leads to the loss of toponym semantic integrity and deviations in geographic entity recognition. This study proposes a set of Chinese toponym annotation specifications that integrate spatial semantics. By leveraging the XML markup language, it deeply combines the spatial location characteristics of toponyms with linguistic features, and designs fine-grained annotation rules to address the limitations of traditional methods in semantic integrity and geographic entity recognition. On this basis, by integrating multi-source corpora from the Encyclopedia of China: Chinese Geography and People’s Daily, a large-scale Chinese toponym annotation corpus (CHTopo) covering five major categories of toponyms has been constructed. The performance of this annotated corpus was evaluated through toponym recognition, exploring the construction methods of a large-scale, diversified, and high-coverage Chinese toponym annotated corpus from the perspectives of applicability and practicality. CHTopo is conducive to providing foundational support for geographic information extraction, spatial knowledge graphs, and geoparsing research, bridging linguistic and geospatial intelligence. Full article

In social networks like community Question-Answering (cQA) services, members interact with each other by asking and answering each other’s questions. This way they find counsel and solutions to very specific real-life situations. Thus, it is safe to say that community fellows log into this kind of social network with the goal of satisfying information needs that cannot be readily resolved via traditional web searches. And in order to expedite this process, these platforms also allow registered, and many times unregistered, internauts to browse their archives. As a means of encouraging fruitful interactions, these websites need to be efficient when displaying contextualized/personalized material and when connecting unresolved questions to people willing to help. Here, demographic factors (i.e., gender) together with frontier deep neural networks have proved to be instrumental in adequately overcoming these challenges. In fact, current approaches have demonstrated that it is perfectly plausible to achieve high gender classification rates by inspecting profile images or textual interactions. This work advances this body of knowledge by leveraging lexicalized dependency paths to control the level of abstraction across texts. Our qualitative results suggest that cost-efficient approaches exploit distilled frontier deep architectures (i.e., DistillRoBERTa) and coarse-grained semantic information embodied in the first three levels of the respective dependency tree. Our outcomes also indicate that relative/prepositional clauses conveying geographical locations, relationships, and finance yield a marginal contribution when they show up deep in dependency trees. Full article

The specific objectives of the current paper were the assessment of potential associations of weather conditions with the presence of Coxiella burnetii in the milk-tank of sheep and goat farms and the investigation for possible interactions between weather conditions and management practices on these farms. The presence of C. burnetii in milk-tank samples collected from 325 sheep flocks and 119 goat herds was assessed by means of a commercially available real-time PCR. Climatic variables present at the location of each farm were downloaded from ‘The POWER Project’. Univariable and multivariable analyses were carried out. Among the climatic variables assessed, only the average wind speed during the 15 days that preceded each visit was found to be a significant predictor for both sheep (p = 0.003) and goat (p = 0.034) farms. The current findings serve to provide information about the epidemiology of C. burnetii infections in small ruminant farms and the possibilities for contamination of the milk produced in these farms, which is important due to the zoonotic nature of the pathogen; these findings thus provide guidance to implement appropriate preventive measures. Full article

The rapid expansion of urban areas necessitates effective monitoring systems for sustainable development planning. Time-series change detection algorithms applied to satellite imagery offer promising solutions, but their comparative effectiveness specifically for urban land cover monitoring remains poorly understood. This study aims to systematically evaluate and optimize three widely used algorithms—LandTrendr, CCDC, and BFAST—selected for their proven capabilities in different land cover change contexts and distinct algorithmic approaches. Using Landsat 5/7/8 (TM/ETM+/OLI) time-series data from 2000 to 2020 and a globally distributed dataset of 200 sample locations spanning six continents, we assess these algorithms across multiple spectral bands and parameter settings for land cover change detection in urban areas. Our analysis reveals that CCDC achieves the highest accuracy (78.14% F1 score) when utilizing complete spectral information (bands B1–B7), outperforming both BFAST (74.32% F1 score with NDVI) and LandTrendr (71.29% F1 score with B1). We demonstrated that, contrary to conventional approaches that prioritize vegetation indices, visible light bands—particularly B1 and B2—achieve higher performance across multiple algorithms. For instance, in LandTrendr, B1 yielded an F1 score of 71.29%, whereas NDVI and EVI produced 56.19% and 53.16%, respectively. Similarly, in CCDC, B2 achieved an F1 score of 72.19%, while NDVI and EVI resulted in 68.57% and 65.33%, respectively. Our findings underscore that parameter optimization and band selection significantly impact detection accuracy, with variations up to 30% observed across different configurations. This comprehensive evaluation provides critical methodological guidance for satellite-based urban expansion monitoring and identifies specific optimization strategies to enhance the application of existing algorithms for urban land cover change detection. Full article

Integral field technology, as an advanced spectroscopic imaging technique, can be used to acquire the spatial and spectral information of the target area simultaneously. In this paper, we propose a method for the field reconstruction of characteristic wavelength bands of a space integral field spectrograph. The precise positioning of the image slicer is crucial to ensure that the spectrograph can accurately capture the position of each slicer in space. Firstly, the line spread function information and the characteristic location coordinates are obtained. Next, the positioning points of each group of image slicers under a specific spectral band are determined by quintic spline interpolation and a double-closed-loop optimization framework, thus establishing connection points for the responses of different image slicers. Then, the accuracy and reliability of the data are further improved by fitting the signal intensity of pixel points. Finally, the data of all image slicers are aligned to complete the field reconstruction of the characteristic wavelength bands of the space integral field spectrograph. This provides new ideas for the two-dimensional spatial reconstruction of spectrographs using image slicers as integral field units in specific spectral bands and accurately restores the two-dimensional spatial field observations of spatial integral field spectrographs. Full article

This paper proposes a general workflow for collecting and analyzing open data from Bicycle Sharing Systems (BSSs) that was developed using data from the Valenbisi system, operated in Valencia by the French company JCDecaux; however, the stages of the proposed workflow are service-independent and can be applied broadly. Cycling has become an increasingly popular mode of transportation, leading to the emergence of BSSs in modern cities. Parallel to this, Smart City solutions have been implemented using Internet of Things (IoT) technologies, such as embedded sensors and GPS-based communication systems, which have become essential to everyday life. When public transportation services or bicycle sharing systems are used, real-time information about the services is provided to customers, including vehicle tracking based on GPS technology and the availability of bikes via sensors installed at bike rental stations. The bike stations were examined from two different perspectives: first, their daily usage, and second, the types of facilities located in their surroundings. Based on these two approaches, the overlap between the clustering results was analyzed—specifically, the similarity in how stations could be grouped and the correlation between their usage and locations. To enhance the raw data retrieved from the service provider’s official API, the stations were annotated based on OpenStreetMap and Overpass API data. Data visualization was created using Tableau from Salesforce. Based on the results, an agreement of 62% was found between the results of the two different clustering approaches. Full article

Cross-document relation extraction (CodRE) aims to predict the semantic relationships between target entities located in different documents, a critical capability for comprehensive knowledge graph construction and multi-source intelligence analysis. Existing approaches primarily rely on bridge entities to capture interdependencies between target entities across documents. However, these models face two potential limitations: they employ entity-centered context filters that overlook relation-specific information, and they fail to account for varying semantic distances between document paths. To address these challenges, we propose CLEAR (Cross-document Link-Enhanced Attention for Relations), a novel framework integrating three key components: (1) the Relation-aware Context Filter that incorporates relation type descriptions to preserve critical relation-specific evidence; (2) the Path Distance-Weighted Attention mechanism that dynamically adjusts attention weights based on semantic distances between document paths; and (3) a cross-path entity matrix that leverages inner- and inter-path relations to enrich target entity representations. Experimental results on the CodRED benchmark demonstrate that CLEAR outperforms all competitive baselines, achieving state-of-the-art performance, with 68.78% AUC and 68.42% F1 scores, confirming the effectiveness of our framework. Full article

Objective: Esophageal cancer (EC) is difficult to visually identify, rendering early detection crucial to avert the advancement and decline of the patient’s health. Methodology: This work aimed to acquire spectral information from EC images via Spectrum-Aided Visual Enhancer (SAVE) technology, which improves imaging beyond the limitations of conventional White-Light Imaging (WLI). The hyperspectral data acquired using SAVE were examined utilizing sophisticated deep learning methodologies, incorporating models such as YOLOv8, YOLOv7, YOLOv6, YOLOv5, Scaled YOLOv4, and YOLOv3. The models were assessed to create a reliable detection framework for accurately identifying the stage and location of malignant lesions. Results: The comparative examination of these models demonstrated that the SAVE method regularly surpassed WLI for specificity, sensitivity, and overall diagnostic efficacy. Significantly, SAVE improved precision and F1 scores for the majority of the models, which are essential measures for enhancing patient care and customizing effective medicines. Among the evaluated models, YOLOv8 showed exceptional performance. YOLOv8 demonstrated increased sensitivity to squamous cell carcinomas (SCCs), but YOLOv5 provided reliable outcomes across many situations, underscoring its adaptability. Conclusions: These findings highlight the clinical importance of combining SAVE technology with deep learning models for esophageal cancer screening. The enhanced diagnostic accuracy provided by SAVE, especially when integrated with CAD models, offers potential for improving early detection, precise diagnosis, and tailored treatment approaches in clinically pertinent scenarios. Full article

Infrared small target detection (IRSTD) aims to locate and separate targets from complex backgrounds. The challenges in IRSTD primarily come from extremely sparse target features and strong background clutter interference. However, existing methods typically perform discrimination directly on the features extracted by deep networks, neglecting the distinct characteristics of weak and small targets in the frequency domain, thereby limiting the improvement of detection capability. In this paper, we propose a frequency-aware masked-attention network (FM-Net) that leverages multi-scale frequency clues to assist in representing global context and suppressing noise interference. Specifically, we design the wavelet residual block (WRB) to extract multi-scale spatial and frequency features, which introduces a wavelet pyramid as the intermediate layer of the residual block. Then, to perceive global information on the long-range skip connections, a frequency-modulation masked-attention module (FMM) is used to interact with multi-layer features from the encoder. FMM contains two crucial elements: (a) a mask attention (MA) mechanism for injecting broad contextual feature efficiently to promote full-level semantic correlation and focus on salient regions, and (b) a channel-wise frequency modulation module (CFM) for enhancing the most informative frequency components and suppressing useless ones. Extensive experiments on three benchmark datasets (e.g., SIRST, NUDT-SIRST, IRSTD-1k) demonstrate that FM-Net achieves superior detection performance. Full article

Assessing the seismic performance of buildings from various epochs is essential for guiding retrofitting policies and educating occupants about their homes’ conditions. However, limited resources pose challenges. Some approaches focus on detailed analyses of a limited number of buildings, while others favor broader coverage with less precision. This paper presents a seismic risk assessment method that balances and integrates the strengths of both, using a comprehensive building survey. We propose a low-cost indicator for evaluating the structural resilience of individual buildings, designed to inform both authorities and property owners, support building rankings, and raise awareness. This indicator classifies buildings by their taxonomy and uses analytical capacity curves (2D or 3D studies) obtained from consulting hundreds of studies to determine the ultimate acceleration (agu) that each building type can withstand before collapse. It also considers irregularities found during the survey (to the exterior and interior) through structural modifiers Δ, and adjusts the peak ground acceleration the building can withstand, agu, based on macroseismic data from past events and based on potential retrofitting, Δ+. Although this method may not achieve high accuracy, it provides a significant approximation for detailed analysis with limited resources and is easy to replicate for similar constructions. The final agu value, considered as resistance, is then compared to the seismic demand at the foundation of the building (accounting for hazard and soil conditions at the building location), resulting in a final R-value. This paper provides specificities to the methodology and applies it to selected areas of the City of Lisbon, clearly supporting the advancement of a more sustainable society. Full article

Geographic routing is an appealing method for wireless sensor networks, as it routes data packets solely based on nodes’ location information rather than global network topology. A fundamental requirement for geographic routing is that source nodes must know the locations of sink nodes to deliver their data. To efficiently provide sink location information, quorum-based sink location service schemes have been introduced, using crossing points between sink location announcement (SLA) and sink location query (SLQ) quorums. However, existing quorum-based schemes typically construct quorums along fixed paths, causing rapid energy depletion of particular sensor nodes and resulting in shorter network lifetimes, especially in irregular sensor fields. To overcome this limitation, we propose an energy-efficient quorum-based sink location service scheme that extends network lifetime by reducing and balancing sensor nodes’ energy consumption. Specifically, our scheme constructs a quadrilateral-shaped SLA quorum using four randomly selected points, and a line-shaped SLQ quorum defined by two randomly chosen points located inside and outside the SLA quorum, respectively. We also address key issues of the proposed scheme, including network holes, irregular boundaries, multiple sources and sinks, and Base Zone sizing, and present methods to handle them. Simulation results demonstrate that the proposed scheme outperforms existing approaches, achieving approximately 29% lower total energy consumption and 27% higher energy balancing across sensor nodes on average. Full article