Search Results (12)

Vibration-based fault diagnosis of chain conveyor gearboxes is challenging under high load and strong shock conditions. This paper applies motor current characteristic analysis technology to scraper conveyor gearbox fault diagnosis and proposes a fault feature extraction method. Firstly, a variational mode decomposition algorithm combined with a genetic algorithm is used to divide the original current signal into several sub-bands with different frequency modulation information, and irrelevant information is preliminarily eliminated. Secondly, an intrinsic mode function (IMF) sub-band fault information extraction method based on lifting wavelet transform is proposed. The minimum entropy value is used to set the sensitive parameters involved in lifting wavelet transform, and the power supply current frequency and noise interference information of a scraper conveyor are removed from the current signal. Finally, it is proved that variational mode decomposition combined with lifting wavelet transform can effectively diagnose the fault of a scraper conveyor by comparative experiments. Full article

An inertial guidance system based on a fiber optic gyroscope (FOG) is an effective way to guide long-distance curved pipe jacking. However, environmental disturbances such as vibration, electromagnetism, and temperature will cause the FOG signal to generate significant random noise. The random noise will overwhelm the effective signal. Therefore, it is necessary to eliminate the random noise. This study proposes a hybrid de-noising method, namely complete ensemble empirical mode decomposition with adaptive noise (CEEMDAN)—lifting wavelet transform (LWT). Firstly, the FOG signal is extracted using a sliding window and decomposed by CEEMDAN to obtain the intrinsic modal function (IMF) with N different scales and one residual. Subsequently, the effective IMF components are selected according to the correlation coefficient between the IMF components and the FOG signal. Due to the low resolution of the CEEMDAN method for high-frequency components, the selected high-frequency IMF components are decomposed with lifting wavelet transform to increase the resolution of the signal. The detailed signals of the LWT decomposition are de-noised using the soft threshold de-noising method, and then the signal is reconstructed. Finally, pipe-jacking dynamic and environmental interference experiments were conducted to verify the effectiveness of the CEEMDAN-LWT de-noising method. The de-noising effect of the proposed method was evaluated by SNR, RMSE, and Deviation and compared with the CEEMDAN and LWT de-noising methods. The results show that the CEEMDAN-LWT de-noising method has the best de-noising effect with good adaptivity and high accuracy. The navigation results of the pipe-jacking attitude before and after de-noising were compared and analyzed in the environmental interference experiment. The results show that the absolute error of the pipe-jacking pitch, roll, and heading angles is reduced by 39.86%, 59.45%, and 14.29% after de-noising. The maximum relative error of the pitch angle is improved from −0.74% to −0.44%, the roll angle is improved from 2.07% to 0.79%, and the heading angle is improved from −0.07% to −0.06%. Therefore, the CEEMDAN-LWT method can effectively suppress the random errors of the FOG signal caused by the environment and improve the measurement accuracy of the pipe-jacking attitude. Full article

Digital imaging is a technology that is extensively employed in diverse diagnostic examinations such as magnetic resonance imaging (MRI), computed tomography (CT), and ultrasound imaging, among other modalities. Transferring a patient’s diagnostic images and medical data to a specialist physician in a distinct geographical location is conducted to facilitate an accurate diagnosis. The safeguarding of patient data privacy and confidentiality is ensured through the utilisation of smart hospital applications for medical data security. The current research presents the effective utilisation of lifting wavelet transform (LWT) and Hessenberg-based particle swarm optimization in order to generate resilient and safeguarded watermarks on ultrasound images. The empirical evidence suggests that our innovative approach outperforms our prior methodology, established through extensive testing. The watermark’s imperceptibility and accuracy are exemplified by its capacity to sustain a superior structural similarity index measure (SSIM) and peak signal-to-noise ratio (PSNR), even amidst diverse image processing assaults. Full article

Advances in digital neuroimaging technologies, i.e., MRI and CT scan technology, have radically changed illness diagnosis in the global healthcare system. Digital imaging technologies produce NIfTI images after scanning the patient’s body. COVID-19 spared on a worldwide effort to detect the lung infection. CT scans have been performed on billions of COVID-19 patients in recent years, resulting in a massive amount of NIfTI images being produced and communicated over the internet for diagnosis. The dissemination of these medical photographs over the internet has resulted in a significant problem for the healthcare system to maintain its integrity, protect its intellectual property rights, and address other ethical considerations. Another significant issue is how radiologists recognize tempered medical images, sometimes leading to the wrong diagnosis. Thus, the healthcare system requires a robust and reliable watermarking method for these images. Several image watermarking approaches for .jpg, .dcm, .png, .bmp, and other image formats have been developed, but no substantial contribution to NIfTI images (.nii format) has been made. This research suggests a hybrid watermarking method for NIfTI images that employs Slantlet Transform (SLT), Lifting Wavelet Transform (LWT), and Arnold Cat Map. The suggested technique performed well against various attacks. Compared to earlier approaches, the results show that this method is more robust and invisible. Full article

Historical documents such as newspapers, invoices, contract papers are often difficult to read due to degraded text quality. These documents may be damaged or degraded due to a variety of factors such as aging, distortion, stamps, watermarks, ink stains, and so on. Text image enhancement is essential for several document recognition and analysis tasks. In this era of technology, it is important to enhance these degraded text documents for proper use. To address these issues, a new bi-cubic interpolation of Lifting Wavelet Transform (LWT) and Stationary Wavelet Transform (SWT) is proposed to enhance image resolution. Then a generative adversarial network (GAN) is used to extract the spectral and spatial features in historical text images. The proposed method consists of two parts. In the first part, the transformation method is used to de-noise and de-blur the images, and to increase the resolution effects, whereas in the second part, the GAN architecture is used to fuse the original and the resulting image obtained from part one in order to improve the spectral and spatial features of a historical text image. Experiment results show that the proposed model outperforms the current deep learning methods. Full article

This research article explores a hybrid strategy that combines an adaptive iterative filtering (IF) method and the fast discrete lifting-based wavelet transform (LWT) to eliminate power-line noise (PLI) and baseline wander from an electrocardiogram (ECG) signal. Due to its correct mathematical basis and its guaranteed a priori convergence, the iterative filtering approach was preferred over empirical mode decomposition (EMD). The noisy modes generated from the IF are fed to an LWT system so as to be disintegrated into the detail and the approximation coefficients. These coefficients are then scaled using a threshold method to generate a noise-free signal. The proposed strategy improves the quality and allows us to precisely preserve the vital components of the signal. The method’s potency has been established empirically by calculating the improvement in signal-to-noise ratio, cross-correlation coefficient and percent root-mean-square difference for different recordings available on the MIT-BIH arrhythmia database and then compared to numerous existing methods. Full article

Wood density is a key indicator for tree functionality and end utilization. Appropriate chemometric methods play an important role in the successful prediction of wood density by visible and near infrared (Vis-NIR) spectroscopy. The objective of this study was to select appropriate pre-processing, variable selection and multivariate calibration techniques to improve the prediction accuracy of density in Chinese white poplar (Populus tomentosa carriere) wood. The Vis-NIR spectra were de-noised using four methods (lifting wavelet transform, LWT; wavelet transform, WT; multiplicative scatter correction, MSC; and standard normal variate, SNV), and four variable selection techniques, including successive projections algorithm (SPA), uninformative variables elimination (UVE), competitive adaptive reweighted sampling (CARS) and iteratively retains informative variables (IRIV), were compared to simplify the dimension of the high-dimensional spectral matrix. The non-linear models of generalized regression neural network (GRNN) and support vector machine (SVM) were performed using these selected variables. The results showed that the best prediction was obtained by GRNN models combined with the LWT and CARS method for Chinese white poplar wood density ($R_p^2$ = 0.870; RMSEP = 13 Kg/m³; ${\mathrm{RPD}}_p$ = 2.774). Full article

In this paper, a new WHT-LWT-GFDM waveform obtained by combining Walsh–Hadamard Transform (WHT), Lifting Wavelet Transform (LWT), and Generalized Frequency Division Multiplexing (GFDM) is presented for use in next-generation wireless communication systems. The proposed approach meets the requirement of 5th-generation (5G) and beyond communication schemes in terms of low latency, low peak-to-average-power ratio (PAPR), and low bit-error rate (BER). To verify the performance of the presented waveform, PAPR and BER simulation results were obtained in additive white Gaussian noise (AWGN) and flat Rayleigh fading channels, and the performance of the proposed system was compared with conventional Orthogonal Frequency Division Multiplexing (OFDM), GFDM, and Walsh–Hadamard transform-based GFDM (WHT-GFDM). Simulation results show that the proposed waveform achieves the best BER and PAPR performances and it provides considerable performance gains over the conventional waveforms. Full article

This paper reports on an efficient lossless compression method for periodic signals based on adaptive dictionary predictive coding. Some previous methods for data compression, such as difference pulse coding (DPCM), discrete cosine transform (DCT), lifting wavelet transform (LWT) and KL transform (KLT), lack a suitable transformation method to make these data less redundant and better compressed. A new predictive coding approach, basing on the adaptive dictionary, is proposed to improve the compression ratio of the periodic signal. The main criterion of lossless compression is the compression ratio (CR). In order to verify the effectiveness of the adaptive dictionary predictive coding for periodic signal compression, different transform coding technologies, including DPCM, 2-D DCT, and 2-D LWT, are compared. The results obtained prove that the adaptive dictionary predictive coding can effectively improve data compression efficiency compared with traditional transform coding technology. Full article

This study aimed to rapidly and accurately identify geographical origin, tree species, and model wood density using visible and near infrared (Vis-NIR) spectroscopy coupled with chemometric methods. A total of 280 samples with two origins (Jilin and Heilongjiang province, China), and three species, Dahurian larch (Larix gmelinii (Rupr.) Rupr.), Japanese elm (Ulmus davidiana Planch. var. japonica Nakai), and Chinese white poplar (Populus tomentosa carriere), were collected for classification and prediction analysis. The spectral data were de-noised using lifting wavelet transform (LWT) and linear and nonlinear models were built from the de-noised spectra using partial least squares (PLS) and particle swarm optimization (PSO)-support vector machine (SVM) methods, respectively. The response surface methodology (RSM) was applied to analyze the best combined parameters of PSO-SVM. The PSO-SVM model was employed for discrimination of origin and species. The identification accuracy for tree species using wavelet coefficients were better than models developed using raw spectra, and the accuracy of geographical origin and species was greater than 98% for the prediction dataset. The prediction accuracy of density using wavelet coefficients was better than that of constructed spectra. The PSO-SVM models optimized by RSM obtained the best results with coefficients of determination of the calibration set of 0.953, 0.974, 0.959, and 0.837 for Dahurian larch, Japanese elm, Chinese white poplar (Jilin), and Chinese white poplar (Heilongjiang), respectively. The results showed the feasibility of Vis-NIR spectroscopy coupled with chemometric methods for determining wood property and geographical origin with simple, rapid, and non-destructive advantages. Full article

The data analysis of visible-near infrared (Vis-NIR) spectroscopy is critical for precise information extraction and prediction of fiber morphology. The objectives of this study were to discuss the de-noising of Vis-NIR spectra, taken from wood, to improve the prediction accuracy of tracheid length in Dahurian larch wood. Methods based on lifting wavelet transform (LWT) and local correlation maximization (LCM) algorithms were developed for optimal de-noising parameters and partial least squares (PLS) was employed as the prediction method. The results showed that: (1) The values of tracheid length in the study were generally high and had a great positive linear correlation with annual rings (R = 0.881), (2) the optimal de-noising parameters for larch wood based Vis-NIR spectra were Daubechies-2 (db2) mother wavelet with 4 decomposition levels while using a global fixed hard threshold based on LWT, and (3) the Vis-NIR model based on the optimal LWT de-noising parameters ( ${\mathrm{R}}_{\mathrm{c}}^2$ = 0.834, $\mathrm{RMSEC}$ = 0.262, ${\mathrm{RPD}}_{\mathrm{c}}$ = 2.454) outperformed those based on the LWT coupled with LCM algorithm (LWT-LCM) ( ${\mathrm{R}}_{\mathrm{c}}^2$ = 0.816, $\mathrm{RMSEC}$ = 0.276, ${\mathrm{RPD}}_{\mathrm{c}}$ = 2.331) and raw spectra ( ${\mathrm{R}}_{\mathrm{c}}^2$ = 0.822, $\mathrm{RMSEC}$ = 0.271, ${\mathrm{RPD}}_{\mathrm{c}}$ = 2.370). Thus, the selection of appropriate LWT de-noising parameters could aid in extracting a useful signal for better prediction accuracy of tracheid length. Full article

Atmospheric CO₂ plays an important role in controlling climate change and its effect on the carbon cycle. However, detailed information on the dynamics of CO₂ vertical mixing remains lacking, which hinders the accurate understanding of certain key features of the carbon cycle. Differential absorption lidar (DIAL) is a promising technology for CO₂ detection due to its characteristics of high precision, high time resolution, and high spatial resolution. Ground-based CO₂-DIAL can provide the continuous observations of the vertical profile of CO₂ concentration, which can be highly significant to gaining deeper insights into the rectification effect of CO₂, the ratio of respiration photosynthesis, and the CO₂ dome in urban areas. A set of ground-based CO₂-DIAL systems were developed by our team and highly accurate long-term laboratory experiments were conducted. Nonetheless, the performance suffered from low signal-to-noise ratio (SNR) in field explorations because of decreasing aerosol concentrations with increasing altitude and surrounding interference according to the results of our experiments in Wuhan and Huainan. The concentration of atmospheric CO₂ is derived from the difference of signals between on-line and off-line wavelengths; thus, low SNR will cause the superimposition of the final inversion error. In such a situation, an efficient and accurate denoising algorithm is critical for a ground-based CO₂-DIAL system, particularly in field experiments. In this study, a method based on lifting wavelet transform (LWT) for CO₂-DIAL signal denoising was proposed. This method, which is an improvement of the traditional wavelet transform, can select different predictive and update functions according to the characteristics of lidar signals, thereby making it suitable for the signal denoising of CO₂-DIAL. Experiment analyses were conducted to evaluate the denoising effect of LWT. For comparison, ensemble empirical mode decomposition denoising was also performed on the same lidar signal. In addition, this study calculated the coefficient of variation (CV) at the same altitude among multiple original signals within 10 min and then performed the same calculation on the denoised signal. Finally, high-quality signal of ground-based CO₂-DIAL was obtained using the LWT denoising method. The differential absorption optical depths of the denoised signals obtained via LWT were calculated, and the profile distribution information of CO₂ concentration was acquired during field detection by using our developed CO₂-DIAL systems. Full article