Search Results (9)

The intensity fluctuation induced spectral phase-change of the laser pulse during nonlinear spectral broadening is theoretically investigated. The oscillation of the phase-change curves at the central part of the spectra is explained by the two-wave interference model, while the bending of the phase-change curves at the wings is considered to originate from the intensity dependent dispersion caused by the self-steepening (SST) effect. Both of them can degrade carrier envelop phase (CEP) stability after an intra-pulse difference frequency generation (IP-DFG) setup. We propose an effective approach to suppress the intensity dependent dispersion with intermediate compression. Verified by numerically simulations, well-phased spectral components at the wings can be obtained, which is highly beneficial for CEP stable pulse generation with noisy input. Full article

Levitated micro-resonators in vacuums have attracted widespread attention due to their application potential in precision force sensing, acceleration sensing, mass measurement and gravitational wave sensing. The optically levitated microsphere in a counter-propagating dual-beam optical trap has been of particular interest because of its large measurement range and flexible manipulation. In this system, laser intensity fluctuation directly influences the trap stability and measurement sensitivity, which makes it a crucial factor in improving trapping performance. In this paper, a time-varying optical force (TVOF) model is established to characterize the influence of laser intensity fluctuation in a dual-beam optical trap. The model describes the relationship between the laser intensity fluctuation, optical force and the dynamic motion of the micro-sized sphere. In addition, an external laser intensity control method is proposed, which achieved a 16.9 dB laser power stability control at the relaxation oscillation frequency. The long-term laser intensity fluctuation was suppressed from 3% to 0.4% in a one-hour period. Experiments showed that the particle’s position detection sensitivity and the stability of the relaxation oscillation could be improved by laser intensity fluctuation suppression. Full article

Walking error has been problematic for pulsed LiDAR based on a single threshold comparator. Traditionally, walk error must be suppressed by some time discrimination methods with extremely complex electronic circuits and high costs. In this paper, we propose a compact and flexible method for reducing walk error and achieving distance-intensity imaging. A single threshold comparator and commercial time digital converter chip are designed to measure the laser pulse’s time of flight and pulse width. In order to obtain first-class measurement accuracy, we designed a specific pulse width correction method based on the Kalman filter to correct the laser recording time, significantly reducing the ranging walk error by echo intensity fluctuation. In addition, the pulse width obtained by our method, which is a recording of the laser intensity, is conducive to target identification. The experiment results verified plane point clouds of various targets obtained by the proposed method with a plane flatness less than 0.34. The novel contribution of the study is to provide a highly integrated and cost-effective solution for the realization of high-precision ranging and multi-dimensional detection by pulsed LiDAR. It is valuable for realizing multi-dimension, outstanding performance, and low-cost LiDAR. Full article

The development of an efficient, portable, real-time, and high-precision ammonia (NH₃) remote sensor system is of great significance for environmental protection and citizens’ health. We developed a NH₃ remote sensor system based on tunable diode laser absorption spectroscopy (TDLAS) technique to measure the NH₃ leakage. In order to eliminate the interference of water vapor on NH₃ detection, the wavelength-locked wavelength modulation spectroscopy technique was adopted to stabilize the output wavelength of the laser at 6612.7 cm⁻¹, which significantly increased the sampling frequency of the sensor system. To solve the problem in that the light intensity received by the detector keeps changing, the 2f/1f signal processing technique was adopted. The practical application results proved that the 2f/1f signal processing technique had a satisfactory suppression effect on the signal fluctuation caused by distance changing. Using Allan deviation analysis, we determined the stability and limit of detection (LoD). The system could reach a LoD of 16.6 ppm·m at an average time of 2.8 s, and a LoD of 0.5 ppm·m at an optimum averaging time of 778.4 s. Finally, the measurement result of simulated ammonia leakage verified that the ammonia remote sensor system could meet the need for ammonia leakage detection in the industrial production process. Full article

A method of reference-free speckle spectroscopy based on the statistical analysis of intensity spatial fluctuations of the spectrally-selected multiple-scattered fluorescence radiation is examined in the case of the finite-band spectral selection of fluorescence light emitted by the laser-pumped random medium, and detection conditions far from the ideal case. Intensity fluctuations are recorded during point-to-point scanning of the surface of a random multiple-scattering medium, which is characterized by the dependences of the second- and third-order statistical moments of intensity on the wavelength of detected spectrally selected light. In turn, the statistical moments of intensity fluctuations are determined by the average propagation path of fluorescent radiation in the medium. This makes it possible to analyze the features of the light-medium interactions at a scale of the order of the transport mean free path of radiation propagation in the medium. Depending on the spectral selection conditions, the method is applicable for characterizing micro- or nano-structured fluorescent layers with thicknesses from tens of micrometers to several millimeters. In the examined case, the finite-band spectral selection results in the values of coherence length of the detected fluorescence radiation compared with the ensemble-averaged absolute value of the path-length difference between the stochastically interfering and spectrally selected partial contributions to the fluorescence field. In addition, non-ideal detection conditions (usage of a multimode optical fiber in the light-collecting unit) cause additional strong damping of the detected speckle intensity fluctuations. These factors lead to a remarkable suppression of spatial fluctuations of the fluorescence intensity in the course of spatially- and spectrally-resolved surface scanning of the laser-pumped probed random medium. Nevertheless, with appropriate procedures of the intrinsic noise reduction and data correction, the obtained spectral dependencies of the normalized third-order statistical moment of the band-limited fluorescence intensity clearly indicate the fluorescence propagation features in the probed multiple-scattering random media (such as a strong influence of the scattering strength and multiple self-absorption–re-emission events on the average propagation path of light in the medium).The possibilities of noise reduction and data correction in the case of applying the band-limited reference-free spectroscopic instrumentation with low spectral and spatial resolution are illustrated by the experimental results obtained using the Rhodamine-6G-doped and continuous wave (CW)-laser-pumped layers of the densely packed titania and silica particles. Full article

Laser intensity noise suppression has essential effects on preparation and characterization of the audio-frequency squeezed vacuum state of light based on a sub-threshold optical parametric oscillator (OPO). We have implemented two feedback loops by using relevant acousto-optical modulators (AOM) to stabilize the intensity of 795-nm near infrared (NIR) fundamental laser and 397.5-nm ultraviolet (UV) laser generated by cavity-enhanced frequency doubling. Typical peak-to-peak laser intensity fluctuation with a bandwidth of ~10 kHz in a half hour has been improved from ±7.45% to ±0.06% for 795-nm NIR laser beam, and from ±9.04% to ±0.05% for 397.5-nm UV laser beam, respectively. The squeezing level of the squeezed vacuum state at 795 nm prepared by the sub-threshold OPO with a PPKTP crystal has been improved from −3.3 to −4.0 dB around 3~9 kHz of analysis frequency range. Full article

An optical tweezer composed of a strongly focused single-spatial-mode Gaussian beam of a red-detuned 1064-nm laser can confine a single-cesium (Cs) atom at the strongest point of the light intensity. We can use this for coherent manipulation of single-quantum bits and single-photon sources. The trapping lifetime of the atoms in the optical tweezers is very short due to the impact of the background atoms, the parametric heating of the optical tweezer and the residual thermal motion of the atoms. In this paper, we analyzed the influence of the background pressure, the trap frequency of optical tweezers and the laser intensity fluctuation of optical tweezers on the atomic trapping lifetime. Combined with the external feedback loop based on an acousto-optical modulator (AOM), the intensity fluctuation of the 1064-nm laser in the time domain was suppressed from ±3.360% to ±0.064%, and the suppression bandwidth in the frequency domain reached approximately 33 kHz. The trapping lifetime of a single-Cs atom in the microscopic optical tweezers was extended from 4.04 s to 6.34 s. Full article

A trace acetylene (C₂H₂) detection system was demonstrated using the cavity-enhanced absorption spectroscopy (CEAS) technique and a near-infrared distributed feedback (NIR-DFB) laser. A Fabry–Perot (F–P) cavity with an effective optical path length of 49.7 m was sealed and employed as a gas absorption cell. Co-axis cavity alignment geometry was adopted to acquire a larger transmitted light intensity and a higher sensitivity compared with off-axis geometry. The laser frequency was locked to the cavity fundamental mode (TEM₀₀ mode) by using the Pound–Drever–Hall (PDH) technique continuously. By introducing a cavity length-locking loop, the drift of the cavity length was suppressed, and the stability of the system was enhanced. To demonstrate the efficacy of the system, a C₂H₂ absorption spectrum near 6534.36 cm⁻¹ was acquired by tuning the laser operation temperature. Measurements of C₂H₂ samples with different concentrations were carried out, and a good linear relationship between C₂H₂ concentration and the cavity-transmitted signal voltage was observed. The measurement results showed the system could work stably for more than 2 h without major fluctuations. The Allan variance analysis results demonstrated a detection limit of 9 parts-per-billion (ppb) with an averaging time of 11 s corresponding to a minimum detectable absorption coefficient of 1.1 × 10⁻⁸ cm⁻¹. Full article

A novel fiber-optic acoustic sensor using an erbium-doped fiber amplifier (EDFA)-based fiber ring laser and a balanced Sagnac interferometer for acoustic sensing of the partial discharge (PD) in power transformers is proposed and demonstrated. As a technical background, an experimental investigation on how the variations of the fiber birefringence affect the sensor performances was carried out, and the results are discussed. The operation principles are described, and the relevant formulas are derived. The analytical results show that an EDFA-based fiber ring laser operating in chaotic mode can provide a degree of polarization (DOP) tunable light beam for effectively suppressing polarization fading noises. The balanced Sagnac interferometer can eliminate command intensity noises and enhance the signal-to-noise ratio (SNR). Furthermore, it inherently operates at the quadrature point of the response curve without any active stabilizations. Several experiments are conducted for evaluating the performances of the sensor system, as well as for investigating the ability of the detection of high-frequency acoustic emission signals. The experimental results demonstrate that the DOP of the laser beam can be continuously tuned from 0.2% to 100%, and the power fluctuation in the whole DOP tuning range is less than 0.05 dBm. A high-frequency response up to 300 kHz is reached, and the high sensing sensitivity for detections of weak corona discharges, as well as partial discharges also is verified. Full article