Search Results (1,877)

Yellow and pink calcite samples from the Huanggangliang and Xilingol mining areas in Inner Mongolia were investigated to elucidate the relationships among chemical composition, unit-cell parameters, coloration, and luminescence. Electron probe micro-analysis, laser ablation inductively coupled plasma mass spectrometry, X-ray diffraction, infrared spectroscopy, Raman spectroscopy, UV-Vis absorption spectroscopy, and photoluminescence measurements show that samples of yellow and pink calcite differ significantly in impurity incorporation and optical behavior. Yellow calcite is relatively enriched in Mg and rare earth elements, especially Y and Ce, whereas pink calcite contains markedly higher Mn and Fe contents. The pink calcite has smaller lattice parameters and unit-cell volume, consistent with greater substitution of Ca²⁺ by smaller-radius cations. Spectra reveal that the pink coloration is mainly related to Mn-associated absorption bands at 402 and 527 nm, whereas the yellow color is attributed to weak impurity- and defect-related absorption. Under ultraviolet excitation, yellow calcite exhibits a broad blue–white emission centered at ~470 nm, whereas pink calcite shows an intense orange–red emission near 625 nm characteristic of Mn²⁺. Variable-temperature photoluminescence further demonstrates that the pink calcite has higher thermal stability, with a thermal-quenching activation energy of 0.218 eV, compared with 0.074 eV for the yellow calcite. These results demonstrate that trace element incorporation plays a key role in regulating the coloration and luminescence of calcite and provide useful insight into the optical behavior of carbonate minerals. Full article

The development of reproducible and stable plasmon-free substrates for surface-enhanced Raman scattering (SERS) is critical for practical applications in analytical chemistry. Transition metal dichalcogenides (TMDCs) have emerged as promising candidates due to their unique electronic properties, yet their performance is often constrained by the chemical inertness of their pristine basal planes. This work presents a systematic comparison of crystalline flakes and nanoparticles of tungsten diselenide (WSe₂) and tungsten ditelluride (WTe₂), prepared via liquid-phase ultrasonic exfoliation and non-equilibrium femtosecond pulsed laser ablation in liquid (PLAL), respectively. The results demonstrate that nanoparticle-based substrates consistently outperform their flake-based counterparts, achieving enhancement factors in the range of ${10}^4$. The superior performance of the nanoparticles is hypothesized to originate from the synthesis-induced defects and high-curvature regions in the nanoparticles shell which facilitates efficient, defect-mediated charge transfer between the substrate and the analyte. At the same time, the inner polycrystalline volume conserves the important characteristics of the bulk counterparts like excitons in semiconducting WSe₂ and broadband absorption in semimetallic WTe₂, which unblocks the tunable photothermal colloidal response. The study establishes morphology engineering through non-equilibrium synthesis as a powerful and generalizable strategy for designing high-performance, dual-function colloidal platforms, offering a pathway toward robust and reproducible analytical systems. Full article

Gem-quality garnets exhibit significant potential for U-Pb geochronological applications due to their advantageous characteristics, including high closure temperatures (750–850 °C), optical transparency, chemical homogeneity, and low inclusion content. This study focuses on the gem-quality yellow-green grossular garnet variety (commonly termed Mali garnet), a unique gemstone exclusively occurring in contact metamorphic deposits of Western Africa’s Republic of Mali. Despite its mineralogical significance, fundamental aspects, including precise age determination and chromophore mechanisms of Mali garnet, remain poorly constrained. Here, we conducted standard gemological characterization, spectroscopic analyses (UV–Vis, FTIR, and Raman), electron probe microanalysis (EPMA), micro-X-ray fluorescence (μ-XRF) elemental mapping, and in situ trace element and laser ablation U-Pb geochronological analysis on Mali garnets. The spectral data and chemical composition studies reveal that the coloration of Malian garnets is primarily attributed to the presence of iron and chromium. Our U-Pb geochronological results yield a crystallization age of 197 ± 3 Ma for the Mali garnet samples. The robustness of garnet U-Pb systems in preserving crystallization ages through multiple thermal events supports their application to Precambrian polymetamorphic terranes, where zircon systems are frequently reset. Full article

The laser-induced lift-off of functional surface layers is a key process in micro- and nano-fabrication; however, optimization criteria for maximizing the lifted-off area remain insufficiently defined. In analogy to the well-established theory of efficient laser ablation, where the maximum ablated volume per pulse is achieved at a peak fluence of $F_0^{\mathrm{o}\mathrm{p}\mathrm{t}}=e^2{F}_{\mathrm{t}\mathrm{h}}$, we develop a theoretical framework for efficient laser lift-off driven by Gaussian beams. The main highlight of this work is the derivation of a new analytical equation for the maximum delaminated area, enabling the straightforward determination of optimal processing conditions. By analytically describing the lift-off area as a function of peak fluence, beam radius, and focus position, we demonstrate that the maximum lifted-off area is achieved at a substantially lower optimal fluence, namely $F_0^{\mathrm{o}\mathrm{p}\mathrm{t}}=e^1{F}_{\mathrm{t}\mathrm{h}}$. Closed-form expressions for the optimal beam radius, maximal lift-off area, and optimal focus position are derived and validated by numerical modeling. The theory is applied to the picosecond laser lift-off of copper oxide from copper, showing excellent agreement between experimental observations and model predictions. The results reveal fundamental differences between ablation- and lift-off-dominated material removal and provide practical guidelines for maximizing process efficiency in laser-assisted delamination, selective coating removal, and surface functionalization. Full article

Laser lift-off (LLO) is a critical process for separating ultra-thin polyimide (PI) films in flexible electronics manufacturing, yet traditional methods often induce thermal and mechanical damage due to high laser energy processing. To address this, we propose a low-threshold LLO method by integrating carbon nanotubes (CNTs) at the interface between a 500 nm PI film and a glass substrate. The interfacial thermal dynamics and separation quality were evaluated through finite element simulations and experimental validations using a 355 nm ultraviolet nanosecond laser. Results demonstrate that CNTs significantly enhance interfacial ultraviolet absorption and promote lateral heat diffusion due to their high axial thermal conductivity. This mechanism broadens the thermal decomposition zone and suppresses vertical heat transfer, thereby reducing the required LLO threshold from 180 mJ/cm² to 120 mJ/cm². Furthermore, the integration of CNTs reduces interfacial adhesion and alters the separation dynamics, resulting in the formation of smoother blisters with increased diameters and reduced heights compared to conventional LLO. These effects effectively minimize thermal and mechanical damage to the ultra-thin PI film and its integrated devices. This CNT-assisted LLO approach provides an efficient, low-damage solution for ultra-thin film separation, showing strong potential for advancing high-performance flexible electronics. Full article

Upper tract urothelial carcinoma (UTUC) accounts for approximately 5–10% of urothelial malignancies and represents a clinically challenging disease due to its frequent presentation at advanced stages and its association with significant morbidity. Radical nephroureterectomy (RNU) with bladder cuff excision remains the standard treatment for high-risk disease; however, this approach inevitably results in loss of renal function and may significantly affect eligibility for cisplatin-based chemotherapy. In patients with imperative indications for renal preservation—including a solitary kidney, bilateral disease, or advanced chronic kidney disease—Kidney-Sparing Surgery (KSS) represents an essential therapeutic strategy. Technological advances in flexible ureteroscopy, improved visualization systems, and laser energy sources have significantly expanded the feasibility of conservative management. Ureteroscopic tumor ablation has become the cornerstone of KSS, allowing local disease control while preserving renal function. Although recurrence rates remain relatively high, repeated endoscopic treatment combined with strict surveillance protocols can achieve acceptable oncological outcomes in carefully selected patients. This narrative review summarizes the current evidence regarding conservative management of UTUC in imperative clinical situations, with particular emphasis on patient selection, endoscopic treatment modalities, laser technologies, economic implications, patient counselling, and follow-up strategies. Full article

The formation and size evolution of gas-phase nanoparticles (NPs) in laser ablation inductively coupled plasma mass spectrometry critically influence aerosol transport, plasma ionization efficiency, and ultimately analytical accuracy. Nevertheless, burst-mode laser ablation, as an efficient and versatile strategy for controlling gas-phase NP size, remains insufficiently explored. Here, we combine experimental investigations and theoretical analysis to elucidate the mechanisms of gas-phase nanoparticle formation and size control by tuning the interpulse interval in burst-mode femtosecond (fs) laser ablation. The mean nanoparticle size exhibits a non-monotonic dependence on interpulse spacing, decreasing with a narrowing size distribution as the interval increases from 0 to 300 ps, and then increasing with distribution broadening at longer delays up to 1000 ps, closely correlating with ablation-crater depth. A characteristic transition at ~300 ps is identified, where both nanoparticle size and crater depth reach a minimum, revealing a critical timescale in pulse–plume–surface interactions. Simulations show that the interpulse interval governs the redistribution of laser energy between the surface and plume, driving a transition from surface-dominated ablation to plume-dominated absorption and partial recovery of surface coupling. This delay-dependent framework provides a unified explanation for nanoparticle formation, where particle size is determined by the competition between plume-mediated fragmentation and surface-driven material supply, and offers a basis for tailoring NP size distributions via temporal pulse shaping. Full article

Arsenopyrite (FeAsS) is an important sulfide that holds gold in orogenic systems. Its arsenic content is often used as a proxy for gold fertility. However, arsenopyrite from the Um Rus gold deposit in Egypt’s Central Eastern Desert shows a complicated gold distribution that makes simple Au-As correlations hard to make. Integrated electron microprobe analysis (EMPA), laser ablation ICP-MS, and principal component analysis (PCA) reveal three unique textural and geochemical domains. Fine-grained arsenopyrite inclusions within pyrite aggregates (28–31 at% As) are devoid of detectable gold; PCA elucidates 84% of their variance through Fe–S versus Co-As substitution (PC1: 61.8%) and Pb-decoupled variability (PC2: 22.2%), suggesting crystallization from a Co-rich, Au-poor fluid. On the other hand, coarse oscillatory-zoned arsenopyrite can hold up to 6154 ppm of invisible gold. This is because of a moderate Au-As substitution (R = 0.41063, p = 0.08074) that was overprinted by a separate Au-Ag-Sb-Te hydrothermal pulse (Au–Ag: R = 0.97762; Au–Sb: R = 0.97608). PCA finds four parts (72.8% variance): Ag-Cu-As associations (PC1: 25.1%), Te versus Bi-Au signatures (PC2: 17.8%), Fe–S stoichiometry (PC3: 17.1%), and an Au versus Pb-decoupled event (PC4: 12.9%). This shows that minerals formed in more than one stage. Irregular As-rich overgrowths, containing ≤950 ppm gold and lacking significant Au–As correlation (R = −0.14011, p = 0.56726), show PCA (74.3% variance) that highlights S-As contrasts (PC1: 25.2%), Co-Ni enrichment (PC2: 18.8%), Cu-Fe-Ni associations (PC3: 16.2%), and a late Au-decoupled event (PC4: 14.2%), indicating barren recrystallization. These results show that just adding arsenic is not a good way to tell if gold is fertile. The highest amounts of invisible gold, on the other hand, are found in oscillatory-zoned domains with Ag-Sb-Te signatures. This research highlights the importance of combining PCA, geochemistry, and microtextures to differentiate auriferous from barren arsenopyrite, thereby enhancing exploration methodologies for structurally intricate orogenic gold systems. Full article

To remove the oxide layer of TC1 titanium alloys in an environmentally friendly and efficient manner, this study conducted experiments using a nanosecond pulsed laser to systematically investigate the influence of different laser energy densities on the cleaning effect. The results showed that the oxide layer could be completely removed at an energy density of 6.37 J/cm², with the surface oxygen element content reduced to 4.87%. The macroscopic surface presented a silvery metallic luster. Moreover, the roughness decreased significantly with the increase in energy density. At 6.37 J/cm², the surface roughness dropped to 0.37 µm. The mechanism of removing the oxide layer of TC1 titanium alloy mainly includes laser ablation and plasma impact. At energy densities ranging from 2.55 J/cm² to 6.37 J/cm², the cleaning mechanism was mainly laser ablation. When the energy density exceeded 6.37 J/cm², the cleaning mechanism gradually shifted from laser ablation to plasma impact as the dominant factor. Meanwhile, the microhardness of the samples after laser cleaning was basically consistent with that of the samples subjected to mechanical grinding, which provides a basis for a nanosecond pulsed laser to replace traditional methods for oxide layer cleaning. Full article

Wound healing research has advanced through nanotechnology-based delivery systems that enhance the stability and therapeutic potential of bioactive compounds. Resveratrol, a natural polyphenol with antioxidant and anti-inflammatory properties, shows promise for wound healing but is limited by poor bioavailability. This study investigates the efficacy of nano-liposome-encapsulated resveratrol in enhancing skin wound repair in adult zebrafish (Danio rerio). Using a laser-based ablation method, precise full-thickness skin wounds were induced and monitored over 50 days. Resveratrol-loaded liposomes were prepared and orally administered via gavage to facilitate systemic exposure. Compared to the control and blank liposome groups, resveratrol liposome treatment significantly accelerated wound closure, achieving earlier healing milestones (25%, 50%, and 75%). The zebrafish model provided a regenerative platform for real-time evaluation of nanomedicine-based therapies. This study demonstrates the wound healing effects of resveratrol and liposomal encapsulation, offering a targeted, systemically administered strategy for advanced systemic healing and highlighting zebrafish as a valuable model for preclinical regenerative medicine research. Full article

Background: High-grade vaginal intraepithelial neoplasia (VaIN 2+) is a rare condition with limited evidence to guide optimal management. This study aimed to evaluate the efficacy of various treatment strategies and identify clinical risk factors associated with treatment failure. Methods: A systematic literature search in PubMed, Scopus, Web of Science, and Cochrane databases was performed following PRISMA guidelines. The meta-analysis included 15 retrospective studies including patients treated for VaIN 2+. Pooled risk ratios (RRs) with 95% confidence intervals (CIs) were calculated for treatment modalities (laser ablation, surgical excision, topical therapy) and clinical risk factors (prior hysterectomy, multifocality, immunosuppression, HPV16 infection and history of cervical intraepithelial neoplasia (CIN)). Results: Immunosuppression was significantly associated with a higher risk of treatment failure (RR = 2.01; 95% CI 1.12–3.60; p = 0.030). Topical therapies were found to have a significantly higher risk of treatment failure compared to laser ablation (RR = 1.92; 95% CI 1.34–2.92; p = 0.009). No statistically significant difference in recurrence risk was found between laser ablation and surgical excision, and between surgical excision and topical therapy. Factors such as prior hysterectomy, multifocality, and history of CIN did not show a statistically significant association with recurrence in the pooled models. Conclusions: Immunosuppression is a critical risk factor for VaIN 2+ recurrence, highlighting the need for individualized management and closer surveillance in this population. Surgical and ablative methods appear superior to topical agents in controlling high-grade disease. Given the retrospective nature of current data, standardized prospective studies are required to refine treatment algorithms. Full article

Femtosecond laser processing has become a powerful approach for high-precision micro- and nanofabrication in transparent materials, owing to its ultrashort pulse duration and minimized thermal effects. However, the limited predictability of processing depth remains a major obstacle to practical applications. Here, we present a morphology prediction framework for femtosecond Bessel laser processing of ZnS that integrates plasma physics modeling with deep learning. Through combined experimental measurements and plasma physics simulations, the influence of laser pulse energy on electron density evolution and material removal depth is systematically investigated. The results reveal the dominant roles of multiphoton ionization, avalanche ionization, and free-electron dynamics in deep-volume processing, and demonstrate the strong sensitivity of the processing morphology to the plasma distribution. Conventional plasma models can accurately reproduce the ablation diameter, yet exhibit significant limitations in predicting the processing depth. We propose a physics data-based framework for femtosecond Bessel beam processing, which integrates a depth-residual regression network conditioned on the peak electron density distribution to effectively learn and compensate for systematic modeling errors in plasma-based simulations. This strategy leads to excellent agreement between predicted and experimental processing depths and three-dimensional morphologies under various energy conditions. The model achieves a mean absolute error (MAE) of 4.9 nm at the pixel level for 3D crater reconstruction. Under rigorous crater-grouped cross-validation with Leave-One-Group-Out evaluation, the model achieves a mean R² of 0.74 across 8 independent craters, demonstrating reliable generalization to unseen energy conditions. These results demonstrate that incorporating physical priors into data-driven learning provides an effective pathway to overcoming accuracy limitations in modeling complex laser–matter interactions. This approach offers a reliable tool for quantitative prediction and parameter optimization in deep femtosecond laser processing of transparent materials and enabling highly controllable and reproducible micro- and nanofabrication for advanced photonic and three-dimensional optical applications. Full article

Modification of PLA with functional nanoparticles is a promising approach for imparting new properties to the material. In this work, titanium nanoparticles (Ti NPs) and titanium dioxide nanoparticles (TiO₂ NPs) were synthesized by laser ablation and characterized by dynamic light scattering, spectrophotometry, and transmission electron microscopy. The average hydrodynamic diameter of Ti NPs was 12 nm, while that of TiO₂ NPs was 24 nm; both dispersions possessed a positive zeta potential (23–27 mV) and spherical morphology. L-PLA composite films containing 0.1 wt.% Ti NPs or TiO₂ NPs were obtained by solution casting. Atomic force and modulation-interference microscopy confirmed the uniform distribution of nanoparticles within the polymer matrix, although partial aggregation was observed. The introduction of TiO₂ NPs increased the water contact angle. Mechanical testing revealed a significant reinforcing effect: the addition of 0.1 wt.% NPs increased the Young’s modulus by 62–68% and the ultimate tensile strength by 16–18% while maintaining a ductile fracture pattern with elongation at break up to ~8%. Both types of composites generated reactive oxygen species (ROS) in aqueous solutions: Ti NPs increased H₂O₂ production by 5.5 times and TiO₂ NPs by 4.9 times, and they also induced the formation of hydroxyl radicals. The accumulation of 8-oxoguanine in DNA and long-lived oxidized protein species confirmed the materials’ ability to cause oxidative damage to biomacromolecules. For E. coli, growth inhibition reached 40.5% (for composites with Ti NPs) and 71% (for composites with TiO₂ NPs). The effect was even more pronounced for S. aureus, where inhibition levels were approximately 70% and 80%, respectively; flow cytometry confirmed the strong bactericidal effect, showing that materials containing TiO₂ NPs increased the proportion of dead cells to 25% for E. coli and ~68% for S. aureus. Cytotoxicity assessment on human fibroblasts (HSF) demonstrated the high biocompatibility of neat L-PLA and composites with Ti NPs (viability > 95%) and with TiO₂ NPs (viability ~93%). The obtained results indicate that L-PLA-based composites with Ti NPs and TiO₂ NPs exhibit pronounced ROS-mediated antibacterial activity without additional UV irradiation. These findings position these materials as highly promising candidates for active biodegradable food packaging to extend shelf-life and for biomedical devices, such as wound dressings and implants, where reducing the risk of bacterial colonization is critical. Full article

Understanding habitat use and connectivity in estuarine fishes is essential for effective conservation and management. In this study, otolith microchemistry was applied to investigate habitat use and connectivity of the estuarine catfish Genidens genidens across three estuaries in southeastern Brazil. A total of 58 individuals were analyzed using laser ablation inductively coupled plasma mass spectrometry, focusing on strontium-to-calcium (Sr:Ca) and barium-to-calcium (Ba:Ca) ratios. Variations in elemental ratios along otolith transects were used to infer individual ontogenetic patterns along the estuarine–marine gradient. Most individuals exhibited combined use of estuarine and marine environments, while trajectories restricted to freshwater were rare. The apparent complexity of chemical profiles tended to increase with age; however, this pattern disappeared after correction for size-related bias, suggesting that age itself did not significantly influence habitat-use transitions. These patterns are consistent with ecological plasticity and partial migration within populations of G. genidens, although they may also reflect exposure to variable environmental conditions. Sr:Ca ratios were useful indicators of salinity-related transitions, whereas Ba:Ca ratios provided complementary information associated with continental influence. Overall, this study highlights the applicability of otolith microchemistry for investigating habitat-use patterns in estuarine fishes and reinforces the ecological importance of estuaries for feeding, growth, and recruitment in G. genidens, while acknowledging inherent limitations related to environmental variability and proxy interpretation. Full article

The development of biodegradable, biocompatible materials with inherent antibacterial properties, suitable for 3D printing, is a key challenge in modern materials science. Composites based on PLA and copper nanoparticles (NPs) are promising candidates for such a material. A protocol of the low-temperature incorporation of 0.1% Cu NPs or 0.1% CuO NPs into a PLA was developed. The dependence of the materials’ physicochemical properties on nanoparticle composition was evaluated. Cu and CuO NPs were synthesized via liquid-phase laser ablation and had sizes of 25 and 80 nm, with modal zeta potential values of +31 and +42 mV, respectively. The incorporation of Cu NPs enhances the tensile strength and Young’s modulus of PLA, and improves antibacterial properties. The PLA + 0.1% CuO or PLA + 0.1% Cu nanoparticles inhibited the growth of E. coli by ~60% and >80%, respectively. PLA + 0.1% Cu NPs destructed of bacterial cell walls. The antibacterial action mechanisms are an 8-oxoguanine and LRPS generations. The obtained materials did not exhibit cytotoxic effects against normal human fibroblasts, did not alter the pH or redox potential of water, and did not release of Cu²⁺ in concentrations toxic to humans. The material PLA + 0.1% Cu NPs is the most optimal. This material may find applications in food production and biomedical applications. Full article