Search Results (4,699)

Acidic polysaccharides, valued for their outstanding bioactivity and physicochemical properties, represent a promising strategy for metabolic disease intervention. In this study, three acidic polysaccharide fractions (BRP-1, BRP-2, and BRP-3) were isolated from Brassica rapa L. using membrane filtration and ion-exchange chromatography. BRP-3, notable for its high galacturonic acid content (76.64%), was further purified to yield the homogeneous fraction BRP-3-1 (Mw = 22.3 kDa). Combining GC-MS, FTIR, and NMR analyses, we report for the first time the detailed structure of BRP-3-1—a heteropolysaccharide composed of rhamnose (1.687%), galacturonic acid (75.584%), galactose (14.452%), and arabinose (8.277%)—with a backbone composed with T-α-L-Araf-(1 → 5)-α-L- Araf -(1 → 4)-α-D-GalpA-(1 → 4)-α-D-2-O- GalpA Me-(1 → 4)-α-D-GalpA-(1 → 4)-α-D-GalpA-(1 → 3)-Galp-(1 → 4)-α-D-GalpA, and T-Rhap, T-Galp as well as T-GalpA for branched chain and terminals. In HepG2 insulin-resistant cells, BRP-3-1 demonstrated potent dual regulation of glucose and lipid metabolism—enhancing glucose consumption, lowering total cholesterol, and significantly reducing triglyceride levels in the high-dose group (800 μg/mL), outperforming BRP-2. This work systematically defines the structure of a highly bioactive acidic polysaccharide from B. rapa L. and confirms its metabolic regulatory effects, offering a strong scientific foundation for its application in functional foods and as an adjuvant therapeutic for metabolic disorders. Full article

Salinity stress impairs maize growth by inducing osmotic stress, pigment degradation, and ionic imbalance, particularly during early seedling development. This study investigated the morpho-physiological and ionic responses of different maize genotypes exposed to increasing salinity levels (control, 3, 6, and 9 dS/m) at the seedling stage. Salinity caused a reduction in biomass accumulation (shoot fresh weight and shoot dry weight), plant height, and K⁺/Na⁺ ratio, with pronounced effects under severe stress. Significant genotypic variability was detected for photosynthetic pigments (chlorophyll a, chlorophyll b, total chlorophyll and carotenoids) growth traits, and ionic regulation, indicating diverse physiological adaptation strategies. Stress tolerance indices and multivariate analysis revealed that chlorophyll stability, carotenoid accumulation, and maintenance of ionic homeostasis (K⁺/Na⁺ ratio) were the dominant physiological determinants of salinity tolerance. Additionally, principal component analysis showed a shift from biomass-driven variation under non-stress conditions to pigment- and ion-driven variation under higher salinity. Based on the results, genotypes BML 6 and HKI 163 maintained higher pigment content and improved K⁺/Na⁺ balance, enabling better growth under saline conditions. These findings highlight key physiological traits underlying salinity tolerance and provide insight into early-stage adaptive mechanisms in maize. Full article

Soil salinization has become a major global constraint threatening ecosystem stability and agricultural production. As a prominent salt-tolerant turfgrass, Paspalum vaginatum (seashore paspalum) serves as an excellent material for exploring salt tolerance mechanisms. In this study, PvHAK12, a high-affinity K⁺ transporter (HAK) family gene isolated from seashore paspalum, was functionally characterized. PvHAK12 encodes a 788 amino acid protein with 13 transmembrane domains, belonging to the plasma membrane-localized ion transporters. It exhibits high sequence conservation with other HAK transporters and is predominantly expressed in roots and stems, with distinct tissue- and time-specific induction under salt stress. Yeast complementation assays revealed that PvHAK12 has no obvious K⁺ transport capacity but may mediate Na⁺ transport. Overexpression of PvHAK12 in Arabidopsis thaliana significantly reduced salt tolerance at germination, seedling and rosette stages, as reflected by lower germination rate, fresh weight, survival rate, the maximum quantum yield of photosystem II (Fv/Fm) value and chlorophyll content, accompanied by higher ion leakage. Under salt stress, transgenic plants accumulated more Na⁺ and less K⁺, leading to an elevated Na⁺/K⁺ ratio. Moreover, transgenic lines displayed weaker antioxidant enzyme activities and higher reactive oxygen species (ROS) accumulation. Transcript analysis further demonstrated that PvHAK12 overexpression suppressed the induction of multiple ion-transport and stress-responsive genes under salt conditions. These results indicate that PvHAK12 negatively regulates plant salt tolerance by disrupting ion homeostasis, antioxidant capacity and stress-related gene expression. Full article

Anthelmintic treatment is widely used in equine health management to control parasitic infections; however, its potential effects on the gut microbiota and metabolic characteristics remain poorly understood. In this study, twelve Yili horses were randomly assigned to two groups: a control group (C), which received no anthelmintic treatment, and a Miechongshu-treated group (T), which was orally administered Miechongshu at a dose of 0.36 g/kg body weight on day 0. Fecal samples were collected from the rectums of Yili horses on day 14 after administration, and differences in gut microbial composition and metabolic characteristics between the two groups were further examined using 16S rRNA gene sequencing in combination with LC–MS/MS-based metabolomic analysis. The results showed that there was no significant difference in α diversity (p > 0.05). At the phylum level, compared with Group C, the relative abundance of Halobacterota significantly increased (p < 0.05). At the family level, the relative abundance of Prevotellaceae in Group T was significantly higher than that in Group C, while the relative abundance of Christensenellaceae decreased (p < 0.05). At the genus level, the relative abundance of Christensenellaceae_R-7_group was significantly decreased (p < 0.05). A total of 98 differentially expressed metabolites were identified in the total ion mode. Among them, 64 were upregulated compared with Group C, and 34 were downregulated. KEGG analysis revealed that four enriched metabolic pathways showed significant differences. Metabolic pathways, tryptophan metabolism, purine metabolism, fatty acid biosynthesis and carotenoid biosynthesis differed between the two groups. Compared with Group C, the contents of the metabolites tetradecanoic acid and adenosine were significantly decreased, while tryptophol was significantly increased. These results indicate that anthelmintic treatment is associated with alterations in the intestinal microecological balance and metabolic homeostasis of the host, providing new insights for evaluating the use of anthelmintics and the management of intestinal health in horses. Full article

Phytoecdysteroids have garnered increasing interest due to their broad biological and pharmacological properties. The present study reports on the development and validation of a reliable liquid chromatography–mass spectrometry method for the detection and quantification of 20-hydroxyecdysone, turkesterone, and ponasterone. The optimized procedure improved ionization efficiency and chromatographic resolution through gradient elution using 0.1% formic acid in water and acetonitrile. Data acquisition in selective ion monitoring modes ensured high analytical precision, reproducibility, and sensitivity. The method demonstrated excellent linearity, accuracy, repeatability, and low detection limits, making it suitable for routine phytochemical and quality control applications. Application of the method to extracts from nutrient-rich superfoods, including kaniwa, spinach, quinoa, and asparagus, confirmed these plants as natural sources of phytoecdysteroids. Additionally, thirteen commercially available dietary supplements labeled as containing extracts of Rhaponticum carthamoides, Cyanotis arachnoidea, Ajuga turkestanica, or ecdysteroids were analyzed. Several products standardized to 80–95% ecdysterone contained substantially lower amounts than declared, with measured 20-hydroxyecdysone levels ranging from below the limit of detection to approximately 50 mg per capsule, whereas some non-standardized products exhibited moderate to high levels, reaching up to approximately 105 mg per capsule. Variability in turkesterone content was also observed among products marketed as standardized extracts. The method provides a simple, reliable, and accessible approach for the quantitative analysis of major phytoecdysteroids in complex plant matrices and dietary supplements. Its implementation may support phytochemical research, routine quality control, and anti-doping monitoring of ecdysteroid-containing products. Full article

Layered nickel-rich cathodes are regarded as promising cathode materials for lithium-ion batteries (LIBs) due to their higher electrochemical capacities and lower cost. However, the development and commercial application of nickel-rich cathodes are severely hindered by significant capacity fading under a high charge cut-off voltage (4.5 V), which arises from interfacial instability and bulk structural degradation during charge–discharge processes. In this study, a two-step double-coating strategy was innovatively adopted to successfully synthesize Al₂O₃/LiBO₂ co-coated LiNi_0.71Co_0.09Mn_0.2O₂ cathode material (denoted as NCM-Al/B). X-ray photoelectron spectroscopy (XPS) verified that Al existed stably in the form of Al³⁺, and B formed B-O-M covalent bonds with transition metals (Ni/Co/Mn), constructing a dual-element synergistic interface. This interface significantly reduced the surface Ni³⁺ content and enhanced the structural stability by suppressing the H₂→H₃ phase transition. The NCM-Al/B material exhibits excellent electrochemical performance: it maintains a remarkable cycling stability with a capacity retention of 91.6% after 100 cycles at 1 C and 25 °C and delivers a discharge capacity of 156.6 mAh·g⁻¹ with a capacity retention of 75.4% after 100 cycles at a high rate of 1 C. This work establishes a chemically driven double-coating strategy and provides a new paradigm for optimizing the performance of high-nickel cathode materials. Full article

The mineralogical composition, textural characteristics, and uranium occurrence of sandstone-hosted uranium ores significantly influence the leaching performance during in situ recovery. This study investigates ore samples from the Zhenyuan uranium deposit, China, utilizing SEM, EPMA, XRD, and XRF to characterize their texture and mineralogy. Combined with thin-section leaching tests, batch stirring experiments, and pressurized column leaching experiments, the leaching behavior of pitchblende, associated gangue minerals, and the whole rocks were evaluated. The results indicate that: Uranium mainly occurs as nano-spherical and film-like pitchblende distributed along the edges of detrital grains and Ti-oxides. Minor uranium is incorporated into Ti-oxides and dolomite lattices via isomorphic substitution or adsorbed by chlorite. Under CO₂ + O₂ leaching conditions, pitchblende was almost completely dissolved, while U-bearing Ti-oxides experienced slight corrosion. Dolomite underwent partial dissolution, providing bicarbonate ions and improving rock permeability. Pyrite dissolution was limited during the early stage of leaching. The high dolomite content, low clay abundance, favorable pore structure, and easily leachable pitchblende suggest that the Zhenyuan deposit is well suited for CO₂ + O₂ in situ recovery. Increasing CO₂ pressure is recommended to enhance dolomite dissolution and improve uranium recovery efficiency. Full article

Raisins come from dried Vitis vinifera L. grapes. They are consumed worldwide, and their shape, color, texture, and taste largely determine consumer preference and market success. Consumers often select raisins based on visual appeal—namely color—without insight into how this relates to nutritional quality. Therefore, this study evaluated raisins of different colors based on non-targeted metabolomics to reveal the nutritional differences among differently colored raisins and to measure the differences in antioxidant capacity. Compared with green raisins (‘Sultanina’), 377–381 differential metabolites were identified in other colored varieties. Kyoto Encyclopedia of Genes and Genomes (KEGG) enrichment analysis revealed that these metabolites were enriched in pathways such as ‘biosynthesis of other secondary metabolites’ and ‘amino acid metabolism’. The comparison of the antioxidant capacity of raisins of different colors shows that the darker the color of the raisins, the stronger their antioxidant capacity. Correlation analysis between total antioxidant capacity and 14 differential metabolites showed a significant positive correlation. Notably, syringetin levels in black raisins (‘Blackcurrant’ and ‘Sweet Sapphire’) were substantially higher—148.31 and 515.94 times greater, respectively—than in green raisins (‘Sultanina’). This elevated syringetin content may significantly contribute to the enhanced antioxidant capacity of black raisins. Furthermore, based on the positive ion mode, the relative contents of 24 and 12 differential metabolites were relatively high in green and red raisins, respectively. The negative ion model identified that 19 and 4 differential metabolites had relatively high contents in green and red raisins. These metabolites may be linked to the unique health benefits of red and green raisins. This study provides valuable insights for consumers selecting raisins based on health needs and for companies developing raisin-based health products. Full article

To address the engineering problems of high cement content, high brittleness, and weak frost resistance of cement-improved loess in the seasonal frozen soil area of Northwest China, F1 ion curing agent (F1) and cement composite improved loess (FCIL) were used in this paper. Through unconfined compressive (UC) strength tests, consolidated undrained (CU) triaxial shear tests, and microscopic pore characteristics analysis, the mechanical properties, freeze–thaw cycle deterioration law, and microscopic pore structure of FCIL were studied. The effects of cement content (C_c), F1 dosage (C_F), number of freeze–thaw cycles (N_F-T), and confining pressure (σ₃) on the strength, deformation behavior, and pore characteristics of FCIL were analyzed. The synergistic improvement mechanism of FCIL, as well as the freeze–thaw damage mechanism, was elucidated. The results show that C_c is the primary factor controlling the strength of improved loess. The incorporation of F1 can further increase UCS and markedly enhance the failure strain (ε_f), thereby achieving simultaneous improvements in strength and ductility. An appropriate mix proportion was identified as C_F = 0.2 L/m³ and C_c = 6%. After 7 d curing, FCIL exhibited a UCS of 1.35 MPa, a cohesion (c) of 205 kPa, an internal friction angle (φ) of 36.2°, and ε_f 1.8 times that of loess improved with C_c = 6% cement alone. CU triaxial shear tests indicate that, under all tested conditions, the stress–strain responses of FCIL exhibit σ3-sensitive strain-softening behavior. As C_c and σ₃ increase, triaxial peak strength (q_max) and secant modulus (E₅₀) increase significantly. Compared with natural loess (NL), FCIL shows a markedly lower porosity (n), a substantial increase in the proportion of micropores, and reductions in medium and small pores. After multiple freeze–thaw cycles, the evolution of the pore structure is effectively restrained. This indicates that the combined use of F1 and cement promotes the formation of a dense layered stacking structure, significantly improves the microscopic pore-size distribution, and enhances the mechanical performance of loess under freeze–thaw environments. Full article

To investigate the sulfate corrosion resistance of cast-in-place repair concrete incorporating recycled coarse aggregate (RCA) under partially exposed conditions, cast-in-place repair concrete specimens with different RCA contents (0%, 30%, and 50%) were immersed in Na₂SO₄ solution. The study systematically investigated the changes in apparent morphology, dimensions, mass, and mechanical properties of the specimens under sulfate corrosion. SEM, XRD, TG/DTG, and MIP were used to characterize the microstructure and mineral composition of the specimens at different corrosion ages. Results indicate that RCA cast-in-place repair concrete partially exposed to a sulfate corrosion environment undergoes coupled physical and chemical corrosion, and the interfacial zone between the recycled aggregate concrete to the base concrete represents the most vulnerable region in the composite system. Incorporating 30% RCA can effectively reduce the degradation rate of specimens under sulfate corrosion, enhance the compactness of the bonding interface, and optimize the interfacial bond strength, compressive strength, and pore structure of the specimens. Excessive RCA content disrupts the internal pore structure, accelerates sulfate ion ingress, and weakens the interfacial bond strength. The presence of RCA significantly reduces the interfacial shear strength of the specimens. After 360 days of sulfate corrosion, specimens featuring 30% and 50% RCA contents exhibit a reduction in shear strength of 15.91% and 40.0%, respectively, compared with the 0% RCA content specimen. Research findings provide a theoretical basis for the application of RCA in concrete repair engineering. Full article

In order to determine the condition of drinking water sources in Donetsk Region and assess potential threats related to water pollution from mining and industrial wastewater, it is extremely important to monitor surface waters, which should include an assessment of the condition of gydrobionts. Additionally, declining surface water quality in the region contributes to pollution in the coastal waters of the Sea of Azov. This study presents the monitoring results for the southern part of the Kalmius River basin. Analysis of water samples revealed contamination by phenol, sulfates, chlorides, anionic surfactants, iron, elevated water hardness, and significant exceedances of suspended solids and total dissolved solids. The iron concentration at the Kalmius River estuary reached 0.81 mg∙L⁻¹, exceeding the permissible limit by 2.5-fold. Sulfate and total dissolved solids concentrations attained 1673 and 160 mg∙L⁻¹, respectively. Changes in the species composition of phytoplankton were observed in response to variations in iron, manganese, and phenol concentrations in the water. Specifically, elevated iron levels led to increased abundance of the metal-sensitive species Cyclotella meneghiniana Kützing. Principal component analysis of the data revealed a relationship between increased phenol concentrations in the aquatic environment and a mean 20% reduction in phytoplankton cell photosynthetic activity, as well as the influence of manganese ions on cell abundance and photopigment content. Thus, phytoplankton cell fluorescence, alongside shifts in species composition and photosynthetic pigment content, can serve as an additional indicator of surface water pollution by iron and phenol. Full article

For the first time, hybrid nanocomposites based on poly(2,5-dichloro-3,6-bis(phenylamino)-p-benzoquinone) (PCPAB) and multi-walled carbon nanotubes (MWCNTs) were obtained and the influence of the preparation method on their structure and functional properties was demonstrated. The nanocomposites were obtained both by ultrasonic mixing of PCPAB and MWCNTs, and via in situ oxidative polymerization of CPAB in the presence of MWCNTs or MWCNTs with the addition of ZnO. The formation of hybrid nanocomposites occurs due to non-covalent interaction (π-stacking) between the graphene structures of the MWCNT surface and the phenyl rings of PCPAB. It was found that during the in situ oxidative polymerization of CPAB in the presence of MWCNTs, the growth of polymer chains occurred in close proximity to the filler surface, which led to the formation of a polymer coating. ZnO particles, localized on MWCNTs, on the one hand, prevent their aggregation, and on the other hand, create additional polymerization reaction centers due to the coordination of the Zn-O bond at the H and O atoms of the monomer. An increase in the concentration of reaction centers as a result led to a 2–2.5-fold reduction in the induction polymerization period. According to SEM data, in this case, a more ordered and denser polymer layer is formed due to intermolecular complexation between the main and side chains of the growing polymer with the participation of Zn²⁺ ions formed as a result of the transformation of ZnO to ZnCl₂ in the acidic reaction medium of polymerization. The results of the study of the frequency dependences of conductivity indicate a hopping mechanism of conductivity of nanocomposites. The electrical conductivity of nanocomposites depends on their production method and the MWCNT content and varies between 0.5 and 1.1 S∙cm⁻¹, which is 6–12 times higher than the conductivity of the original polymer. Thermogravimetric analysis revealed that the nanocomposites exhibit enhanced thermal stability compared to PCPAB. The best results were shown by nanocomposites with a higher content of MWCNTs, for which the residual mass at 450 °C was 51–53%. Full article

With increasing demand for wellness tourism, identifying the key factors influencing emotional perceptions is essential for optimizing destination planning and management. Although Anhui Province has experienced rapid growth in wellness tourism destinations in recent years, scientific understanding of tourists’ emotional perceptions and their driving mechanisms has lagged behind this rapid expansion, a gap that can be addressed by integrating big data with spatial analysis to provide a scientific perspective for optimizing destination planning and informing regional wellness tourism policy. To address this gap, this study conducts a sentiment analysis of wellness bases in Anhui Province using user-generated content (UGC) data. Sentiment scores were quantified via SnowNLP, while kernel density, time-series, and multivariate statistical analyses were applied to examine spatial distributions, temporal dynamics of sentiments and review volumes, and emotional driving factors. The results indicate a spatial pattern of higher density in the south, lower density in the north, and dual-core agglomeration, closely linked to natural resource endowments. Temporally, sentiment scores rise in spring and summer and decline in winter, while review volumes peak in spring and autumn. Overall regression analyses reveal a significant positive effect of green coverage and a negative effect of accommodation prices. In the typological analysis, sentiment scores of Forest Wellness Bases (FWBs) relate to green coverage and negative ions, while Hydrological Wellness Bases (HWBs), Traditional Chinese Medicine Wellness Bases (TCMWBs), and Wellness Towns (WTs) are driven by the combined effects of facility services, locational price, and ecological environment. These findings provide a scientific basis for the sustainable development and differentiated management of wellness tourism destinations. Full article

Plant-derived materials previously regarded as low-value by-products are increasingly investigated as sources of bioactive compounds, yet hemp (Cannabis sativa L.) leaves remain underutilized despite their rich phytochemical profile. This study aimed to evaluate and compare the in vitro antioxidant capacity and total phenolic content of methanolic extracts obtained from the leaves and inflorescences of four hemp cultivars (Finola, Futura 75, Dioica, and Kompolti). Antioxidant capacity (AC) was assessed using ABTS, DPPH, and FRAP assays, while total phenolic content was determined spectrophotometrically. Inflorescences exhibited significantly higher total phenolic content than leaves, with the highest values observed in the Finola cultivar. In contrast, leaf extracts showed greater radical-scavenging capacity in the ABTS and DPPH assays, whereas inflorescences demonstrated higher ferric ion–reducing power in the FRAP assay. Both cultivar and plant part had a significant effect on all evaluated parameters. Overall, hemp leaves and inflorescences displayed distinct and complementary antioxidant profiles in vitro, with Kompolti and Finola leaves characterized by strong radical-scavenging activity and Finola inflorescences showing the highest reducing capacity. These findings provide a comparative characterization of hemp morphological parts with respect to phenolic content and antioxidant behavior, highlighting the potential value of leaves as a source of bioactive compounds. Full article

To explore the characteristic volatile compounds of ‘Hujing Milu’ peaches from different growing regions, headspace solid-phase microextraction coupled with gas chromatography–mass spectrometry (HS-SPME-GC-MS) and headspace gas chromatography–ion mobility spectrometry (HS-GC-IMS) were employed to analyze volatile components in samples from six production areas. A total of 73 and 56 volatile compounds were identified by HS-SPME-GC-MS and HS-GC-IMS, respectively. Quantitative analysis revealed that esters, aldehydes, and alcohols were the main contributors to the aroma profile, accounting for over 70% of the total relative content. Combined with chemometric analysis (VIP > 1 and OAV/ROAV > 1), 17 potential biomarkers were identified that can distinguish ‘Hujing Milu’ peaches from different regions, including ethyl acetate, hexanol, (E)-2-nonenal, and dihydro-β-ionone. Moreover, soil properties of these regions and their correlation with volatile compounds were analyzed to elucidate the formation mechanisms of characteristic aromas. The results showed that ethyl acetate exhibited a significant positive correlation with soil pH (r = 0.530, p < 0.05), whereas dihydro-β-ionone showed a significant positive correlation with soil organic matter (r = 0.587, p < 0.05) and available potassium (r = 0.830, p < 0.05). This study identified characteristic volatile compounds of ‘Hujing Milu’ peaches from different regions, providing a reliable technical basis for origin traceability and the enhancement of aroma quality in ‘Hujing Milu’ peaches. Full article