Search Results (1,752)

To address the urgent need for high-fidelity motion data for validating navigation algorithms for Unmanned Underwater Vehicles (UUVs), this paper proposes a data generation method based on a parametric motion model. First, based on the principles of rigid body dynamics and fluid mechanics, a decoupled six-degrees-of-freedom (6-DOF) Linear and Angular Acceleration Vector (LAAV) model is constructed, establishing a dynamic mapping relationship between the rudder angle and speed setting commands and motion acceleration. Second, a segmentation–identification framework is proposed for three-dimensional trajectory segmentation, integrating Gaussian Process Regression and Ordering Points To Identify the Clustering Structure (GPR-OPTICS), along with a Dynamic Immune Genetic Algorithm (DIGA). This framework utilizes real vessel data to achieve motion segment clustering and parameter identification, completing the construction of the LAAV model. On this basis, by introducing sensor error models, highly credible Inertial Measurement Unit (IMU) data are generated, and a complete attitude, velocity, and position (AVP) motion sequence is obtained through an inertial navigation solution. Experiments demonstrate that the AVP data generated by our method achieve over 88% reliability compared with the real vessel dataset. Furthermore, the proposed method outperforms the PSINS toolbox in both the reliability and accuracy of all motion parameters. These results validate the effectiveness and superiority of our proposed method, which provides a high-fidelity data benchmark for research on underwater navigation algorithms. Full article

This study presents a standardized method for multimodal monitoring of exercise execution in isolated, confined, and extreme (ICE) environments, addressing the need for reproducible assessment of neuromuscular and cardiovascular responses under space- and equipment-limited conditions. The method integrates wearable surface electromyography (sEMG), inertial measurement units (IMU), and electrocardiography (ECG) to capture muscle activation, movement, and cardiac dynamics during space-efficient exercise. Ten exercises suitable for confined habitats were implemented during analog missions conducted in the DeepLabH03 facility, with feasibility evaluated in a seven-day campaign involving three adult participants. Signals were synchronized using video-verified repetition boundaries, sEMG was normalized to maximum voluntary contraction, and sEMG amplitude- and frequency-domain features were extracted alongside heart rate variability indices. The protocol enabled stable real-time data acquisition, reliable repetition-level segmentation, and consistent detection of muscle-specific activation patterns across exercises. While amplitude-based sEMG indices showed no uniform main effect of exercise, robust exercise-by-muscle interactions were observed, and sEMG mean frequency demonstrated sensitivity to differences in movement strategy. Cardiac measures showed limited condition-specific modulation, consistent with short exercise bouts and small sample size. As a proof-of-concept feasibility study, the proposed protocol provides a practical and reproducible framework for multimodal physiological monitoring of exercise in ICE analogs and other constrained environments, supporting future studies on exercise quality, training load, and adaptive feedback systems. The protocol is designed to support near-real-time monitoring and forms a technical basis for future exercise-quality feedback in confined habitats. Full article

Aiming to address the safety and stability issues caused by typical faults of Unmanned Aerial Vehicle (UAV) navigation sensors, a novel fault-tolerant method is proposed, which can capture the temporal dependencies of fault feature evolution, and complete the classification, prediction, and data reconstruction of fault data. In this fault-tolerant method, the feature extraction module adopts the FNKPCA method—integrating the Frobenius Norm (F-norm) with Kernel Principal Component Analysis (KPCA)—to optimize the kernel function’s ability to capture signal features, and enhance the system reliability. By combining FNKPCA with Support Vector Machine (SVM) and Bidirectional Long Short-Term Memory (BiLSTM), an active fault-tolerant processing method, namely FNKPCA–SVM–BiLSTM, is obtained. This study conducts comparative experiments on public datasets, and verifies the effectiveness of the proposed method under different fault states. The proposed approach has the following advantages: (1) It achieves a detection accuracy of 98.64% for sensor faults, with an average false alarm rate of only 0.15% and an average missed detection rate of 1.16%, demonstrating excellent detection performance. (2) Compared with the Long Short-Term Memory (LSTM)-based method, the proposed fault-tolerant method can reduce the RMSE metrics of Global Positioning System (GPS), Inertial Measurement Unit (IMU), and Ultra-Wide-Band (UWB) sensors by 77.80%, 14.30%, and 75.00%, respectively, exhibiting a significant fault-tolerant effect. Full article

In the realm of wearable technology, achieving robust continuous authentication requires balancing high security with the strict resource constraints of embedded platforms. Conventional machine learning approaches and deep learning-based biometrics often incur high computational costs, making them unsuitable for low-power edge devices. To address this challenge, we propose H-PPG, a lightweight authentication system that integrates photoplethysmography (PPG) and inertial measurement unit (IMU) signals for continuous user verification. Using Hyperdimensional Computing (HDC), a lightweight classification framework inspired by brain-like computing, H-PPG encodes user physiological and motion data into high-dimensional hypervectors that comprehensively represent individual identity, enabling robust, efficient and lightweight authentication. An adaptive learning process is employed to iteratively refine the user’s hypervector, allowing it to progressively capture discriminative information from physiological and behavioral samples. To further enhance identity representation, a dimension regeneration mechanism is introduced to maximize the information capacity of each dimension within the hypervector, ensuring that authentication accuracy is maintained under lightweight conditions. In addition, a user-defined security level scheme and an adaptive update strategy are proposed to ensure sustained authentication performance over prolonged usage. A wrist-worn prototype was developed to evaluate the effectiveness of the proposed approach and extensive experiments involving 15 participants were conducted under real-world conditions. The experimental results demonstrate that H-PPG achieves an average authentication accuracy of 93.5%. Compared to existing methods, H-PPG offers a lightweight and hardware-efficient solution suitable for resource-constrained wearable devices, highlighting its strong potential for integration into future smart wearable ecosystems. Full article

The use of ships and boats as sea-state (SS) measurement platforms has the potential to expand ocean observations while providing actionable information for real-time operational decision-making at sea. Within the framework of the Wave Buoy Analogy (WBA), this work develops an inverse approach in which efficient simulations of wave-induced motions of an advancing vessel are used to train a neural network (NN) to predict SS parameters across a broad range of wave climates. We show that a reduced set of novel motion discriminant variables (MDVs)—computed from short time series of heave, roll, and pitch motions measured by an onboard inertial measurement unit (IMU), together with the vessel’s forward speed—provides sufficient and robust information for accurate, near-real-time SS estimation. The methodology targets small, barge-like tugboats whose operations are SS-limited and whose motions can become large and strongly nonlinear near their upper operating limits. To accurately model such responses and generate training data, an efficient nonlinear time-domain seakeeping model is developed that includes nonlinear hydrostatic and viscous damping terms and explicitly accounts for forward-speed effects. The model is experimentally validated using a scaled physical model in laboratory wave-tank tests, demonstrating the necessity of these nonlinear contributions for this class of vessels. The validated model is then used to generate large, high-fidelity datasets for NN training. When applied to independent numerically simulated motion time series, the trained NN predicts SS parameters with errors typically below 5%, with slightly larger errors for SS directionality under relatively high measurement noise. Application to experimentally measured vessel motions yields similarly small errors, confirming the robustness and practical applicability of the proposed framework. In operational settings, the trained NN can be deployed onboard a tugboat and driven by IMU measurements to provide real-time SS estimates. While results are presented for a specific vessel, the methodology is general and readily transferable to other ship geometries given appropriate hydrodynamic coefficients. Full article

Background: We explored a new approach for increasing participation in daily life for individuals with severe movement impairments. The core of the approach is an application designed to Translate Intentions into Action (TIA) as a motivational tool for both leisure and clinical training sessions. Methods: The TIA application was developed to enable users to activate motivational feedback, like sounds, music, or videos, through movement measured with an IMU (Inertial Measurement Unit). IMUs were calibrated to user-specific thresholds based on individual movement potential. TIA was tested in two different age groups to assess applicability throughout lifespan and across different motor capacities. Results: The results indicated that TIA can be used for improved participation when positive feedback is provided during the intervention sessions. Observations demonstrated that regardless of age and motor capabilities, increased participation was achieved. TIA demonstrated the far-reaching potential to enhance the engagement and motivation of individuals with different levels of severe disabilities. Conclusions: By providing personalized, positive feedback through movement-activated outputs, TIA can be used by a wide range of people, with or without motor disabilities, to control digital outputs, such as video and audio. These findings suggest that TIA can be a valuable tool in both clinical and leisure settings to promote meaningful participation in activities. Full article

Wearable inertial measurement units (IMUs) provide an accessible means of monitoring fatigue-related changes in running biomechanics, yet most existing methods rely on limited feature sets, lack personalization, or fail to generalize across individuals. This study introduces a bioinformatics-inspired stride sequence modeling framework that integrates spectral–entropy features, sample entropy, frequency-domain descriptors, and mixed-effects statistical modeling to detect fatigue using a single lumbar-mounted IMU. Nineteen recreational runners completed non-fatigued and fatigued 400 m runs, from which we extracted stride-level features and evaluated (1) population-level fatigue classification via global leave-one-participant-out (LOPO) models and (2) individualized fatigue detection through supervised participant-specific models and non-fatigued-only anomaly detection. Mixed-effects models revealed robust and multidimensional fatigue effects across key biomechanical features, with large standardized effect sizes (Cohen’s d up to 1.35) and substantial variance uniquely explained by fatigue (partial R² up to 0.31). Global LOPO machine learning models achieved modest accuracy (55%), highlighting strong inter-individual variability. In contrast, personalized supervised Random Forest classifiers achieved near-perfect performance (mean accuracy 97.7%; mean AUC 0.997), and NF-only One-Class SVMs detected fatigue as a deviation from individual baseline patterns (mean AUC 0.967). Entropy and stride-to-stride variability metrics further demonstrated consistent fatigue-linked increases in movement irregularity and reduced neuromuscular control. These findings show that IMU stride sequences contain highly informative, fatigue-sensitive biomechanical signatures, and that combining bioinformatics-inspired sequence analysis with hybrid statistical and personalized AI models enables both robust population-level insights and highly reliable individualized fatigue monitoring. The proposed framework supports future integration into sports analytics platforms, digital coaching systems, and real-time wearable fatigue detection technologies. This highlights the necessity of personalized fatigue-monitoring strategies in wearable systems. Full article

Analyzing the dynamics of muscle activation patterns and joint range of motion is essential to understanding human movement during complex tasks such as tooth brushing Activities of Daily Living (ADLs). In individuals with neuromotor impairments, accurate assessment of upper limb motor patterns plays a critical role in rehabilitation, supporting the identification of compensatory strategies and informing clinical interventions. This study presents the validation of a previously developed novel, low-cost, wearable, and portable multimodal prototype that integrates inertial measurement units (IMU) and surface electromyography (sEMG) sensors into a single device. The system enables bilateral monitoring of arm segment kinematics and muscle activation amplitudes from six major agonist muscles during ADLs. Eleven healthy participants performed a functional task, tooth brushing, while wearing the prototype. The recorded data were compared with two established gold-standard systems, Qualisys^® motion capture system and Biosignalsplux^®, for validation of kinematic and electrophysiological measurements, respectively. This study provides technical insights into the device’s architecture. The developed system demonstrates potential for clinical and research applications, particularly for monitoring upper limb function and evaluating rehabilitation outcomes in populations with neurological disorders. Full article

To address the challenges in unstructured orchard environments, including high geometric similarity between fruit trees (with the measured average Euclidean distance difference between point cloud descriptors of adjacent trees being less than 0.5 m), significant dynamic interference (e.g., interference from pedestrians or moving equipment can occur every 5 min), and uneven terrain, this paper proposes an improved mapping algorithm named OSC-LIO (Orchard Scan Context Lidar Inertial Odometry via Smoothing and Mapping). The algorithm designs a dynamic point filtering strategy based on Euclidean clustering and spatiotemporal consistency within a 5-frame sliding window to reduce the interference of dynamic objects in point cloud registration. By integrating local semantic features such as fruit tree trunk diameter and canopy height difference, a two-tier verification mechanism combining “global and local information” is constructed to enhance the distinctiveness and robustness of loop closure detection. Motion compensation is achieved by fusing data from an Inertial Measurement Unit (IMU) and a wheel odometer to correct point cloud distortion. A three-level hierarchical indexing structure—”path partitioning, time window, KD-Tree (K-Dimension Tree)”—is built to reduce the time required for loop closure retrieval and improve the system’s real-time performance. Experimental results show that the improved OSC-LIO system reduces the Absolute Trajectory Error (ATE) by approximately 23.5% compared to the original LIO-SAM (Tightly coupled Lidar Inertial Odometry via Smoothing and Mapping) in a simulated orchard environment, while enabling stable and reliable path planning and autonomous navigation. This study provides a high-precision, lightweight technical solution for autonomous navigation in orchard scenarios. Full article

Background: Greater trochanteric pain syndrome (GTPS) is associated with structural tendon alterations and functional impairment. Extracorporeal shockwave therapy (ESWT) is a common treatment, but objective monitoring of tendon remodeling and motor recovery remains limited. Objective: This study aimed to integrate shear-wave elastography (SWE) expressed in m/s and wearable inertial measurement unit (IMU) as biosensing tools for the quantitative assessment of tendon elasticity, morphology, and hip motion after ESWT in GTPS. Methods: In a prospective cohort of adults with chronic GTPS, shear wave elastography (SWE) quantified gluteus medius tendon (GMT) elasticity and thickness, while hip abduction range of motion (ROM) was measured using a triaxial inertial measurement unit. Clinical scores on the Visual Analogue Scale (VAS), Harris Hip Score (HHS), Low Extremity Functional Scale (LEFS), and Roles and Maudsley score (RM) were collected at baseline (T0) and at 6 months (T1). Results: Thirty-five patients completed follow-up. Pain and function improved significantly (VAS, HHS, LEFS, RM; all p < 0.05). SWE values of the affected GMT increased, while tendon thickness decreased yet remained greater than on the contralateral side. Hip abduction ROM increased significantly from T0 to T1 (p < 0.05). Correlation analysis showed a negative association between abduction and pain at T1 (r = −0.424; p = 0.011) and, at baseline, between abduction and VAS (r = −0.428; p = 0.010) and RM (r = −0.346; p = 0.042), and a positive association with LEFS (r = 0.366; p = 0.031). SWE correlated negatively with VAS at T1 (r = −0.600; p < 0.05) and positively with HHS at T1 (r = 0.400; p < 0.05). Conclusions: Integrating elastography with inertial sensor-based motion analysis provides complementary, quantitative insights into tendon remodeling and functional recovery after ESWT in GTPS. These findings support combined imaging and wearable motion measures to monitor treatment response over time. Full article

Over the past two decades, Light Detection and Ranging (LiDAR) technology has evolved from early National Aeronautics and Space Administration (NASA)-led airborne laser altimetry into commercially mature systems that now underpin vegetation remote sensing across scales. Continuous advancements in laser engineering, signal processing, and complementary technologies—such as Inertial Measurement Units (IMU) and Global Navigation Satellite Systems (GNSS)—have yielded compact, cost-effective, and highly sophisticated LiDAR sensors. Concurrently, innovations in carrier platforms, including uncrewed aerial systems (UAS), mobile laser scanning (MLS), Simultaneous Localization and Mapping (SLAM) frameworks, have expanded LiDAR’s observational capacity from plot- to global-scale applications in forestry, precision agriculture, ecological monitoring, Above Ground Biomass (AGB) modeling, and wildfire science. This review synthesizes LiDAR’s cross-domain capabilities for the following: (a) quantifying vegetation structure, function, and compositional dynamics; (b) recent sensor developments encompassing ALS discrete-return ${(ALS}_D)$, and ALS full-waveform $\left({ALS}_{FW}\right)$, photon-counting LiDAR (PCL), emerging multispectral LiDAR (MSL), and hyperspectral LiDAR (HSL) systems; and (c) state-of-the-art data processing and fusion workflows integrating optical and radar datasets. The synthesis demonstrates that many LiDAR-derived vegetation metrics are inherently transferable across domains when interpreted within a unified structural framework. The review further highlights the growing role of artificial-intelligence (AI)-driven approaches for segmentation, classification, and multitemporal analysis, enabling scalable assessments of vegetation dynamics at unprecedented spatial and temporal extents. By consolidating historical developments, current methodological advances, and emerging research directions, this review establishes a comprehensive state-of-the-art perspective on LiDAR’s transformative role and future potential in monitoring and modeling Earth’s vegetated ecosystems. Full article

Gait recognition using wearable sensor data is crucial for healthcare, rehabilitation, and monitoring neurological and musculoskeletal disorders. This study proposes a deep learning framework for gait classification using inertial measurements from four body-mounted IMU sensors (head, lower back, and both feet). The data were collected from a publicly available, clinically annotated dataset comprising 1356 gait trials from 260 individuals with diverse pathologies. The framework, G-MASA-TCN (Gait Multi-Anchor, Space-Aware Temporal Convolutional Network), integrates multi-scale temporal fusion, graph-informed spatial modeling, and residual dilated convolutions to extract discriminative gait signatures. To ensure both high performance and interpretability, Integrated Gradients is incorporated as an explainable AI (XAI) method, providing sensor-level and temporal attributes that reveal the features driving model decisions. The framework is evaluated via repeated cross-validation experiments, reporting detailed metrics with cross-run statistical analysis (mean ± standard deviation) to assess robustness. Results show that G-MASA-TCN achieves 98% classification accuracy for neurological, orthopedic, and healthy cohorts, demonstrating superior stability and resilience compared to baseline architectures, including Gated Recurrent Unit (GRU), Transformer neural networks, and standard TCNs, and 98.4% accuracy in identifying individual subjects based on gait. Furthermore, the model offers clinically meaningful insights into which sensors and gait phases contribute most to its predictions. This work presents an accurate, interpretable, and reliable tool for gait pathology recognition, with potential for translation to real-world clinical settings. Full article

Upper-limb motor impairment is a major consequence of stroke and neuromuscular disorders, imposing a sustained clinical and socioeconomic burden worldwide. Quantitative assessment of limb positioning and motion accuracy is fundamental to rehabilitation, guiding therapy evaluation and robotic assistance. The evolution of upper-limb positioning systems has progressed from optical motion capture to wearable inertial measurement units (IMUs) and, more recently, to data-driven estimators integrated with rehabilitation robots. Each generation has aimed to balance spatial accuracy, portability, latency, and metrological reliability under ecological conditions. This review presents a systematic synthesis of the state of measurement uncertainty, calibration, and traceability in upper-limb rehabilitation robotics. Studies are categorised across four layers, i.e., sensing, fusion, cognitive, and metrological, according to their role in data acquisition, estimation, adaptation, and verification. The Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) protocol was followed to ensure transparent identification, screening, and inclusion of relevant works. Comparative evaluation highlights how modern sensor-fusion and learning-based pipelines achieve near-optical angular accuracy while maintaining clinical usability. Persistent challenges include non-standard calibration procedures, magnetometer vulnerability, limited uncertainty propagation, and absence of unified traceability frameworks. The synthesis indicates a gradual transition toward cognitive and uncertainty-aware rehabilitation robotics in which metrology, artificial intelligence, and control co-evolve. Traceable measurement chains, explainable estimators, and energy-efficient embedded deployment emerge as essential prerequisites for regulatory and clinical translation. The review concludes that future upper-limb systems must integrate calibration transparency, quantified uncertainty, and interpretable learning to enable reproducible, patient-centred rehabilitation by 2030. Full article

In this paper, Flare Bright presents flight test results gathered using a ~2m fixed wingspan drone to demonstrate the capability that has been achieved using an Inertial Navigation System (INS) augmented by Machine Learning tuned software. INSs, using Inertial Measurement Units (IMUs), are invaluable for position estimation in GNSS-compromised environments as no external information is required. However, with no absolute measurement of a vehicle’s position or attitude, INSs suffer from significant drift over time. The results from a robust flight test programme, over multiple vehicles, terrains and flight paths, show how Flare Bright combined a low cost and low SWaP (space, weight and power) IMU, with their patent-pending software-only techniques, to boost INS performance to the degree of besting a ‘tactical grade’ IMU in ~20 min. These results credibly demonstrate the value of Flare Bright’s solution as an effective, low-cost and low-weight INS for extended flight operations of small uncrewed aerial systems in GNSS-compromised environments, with performance comparable to heavier, more expensive high-end IMUs. Full article

Background: Ground contact (GC) detection is essential for sprint performance analysis. Inertial measurement units (IMUs) enable field-based assessment, but their reliability during sprint acceleration remains limited when using heuristic and recently used machine learning algorithms. This study introduces a deep learning one-dimensional convolutional neural network (1D-CNN) to improve GC event and GC times detection in sprint acceleration. Methods: Twelve sprint-trained athletes performed 60 m sprints while bilateral shank-mounted IMUs (1125 Hz) and synchronized high-speed video (250 Hz) captured the first 15 m. Video-derived GC events served as reference labels for model training, validation, and testing, using resultant acceleration and angular velocity as model inputs. Results: The optimized model (18 inception blocks, window = 100, stride = 15) achieved mean Hausdorff distances ≤ 6 ms and 100% precision and recall for both validation and test datasets (Rand Index ≥ 0.977). Agreement with video references was excellent (bias < 1 ms, limits of agreement ± 15 ms, r > 0.90, p < 0.001). Conclusions: The 1D-CNN surpassed heuristic and prior machine learning approaches in the sprint acceleration phase, offering robust, near-perfect GC detection. These findings highlight the promise of deep learning-based time-series models for reliable, real-world biomechanical monitoring in sprint acceleration tasks. Full article