Search Results (39)

The advent of electric propulsion for new aircraft designs necessitates the optimization of propeller aerodynamic performance and the reduction of acoustic signatures. Variable-pitch propellers present a promising solution, offering the flexibility to adjust blade angles in response to different flight conditions. The study investigates the performance of blade pitch configurations tailored to specific flight conditions. Rather than a dynamic pitch change, the research evaluates discrete pitch settings coupled with corresponding advance ratios to identify optimal operating points. Findings show that increasing collective pitch in response to a higher advance ratio (forward flight) successfully maintains aerodynamic efficiency and thrust, with an expected increase in torque. While this adjustment leads to an anticipated rise in noise due to higher aerodynamic loading, results reveal that a collective pitch increment of $+5°$ actively suppresses broadband noise at frequencies above 2 kHz. Analysis of the flow field and surface pressure fluctuations indicates this suppression is directly attributed to the mitigation of outboard propeller stall. Ultimately, this work demonstrates the feasibility of using collective pitch adjustments not only to enhance flight performance but also to actively control and suppress components of the propeller noise signature, such as the broadband noise. Full article

Modern aircraft usually employ control allocation to distribute virtual control commands among redundant effectors. Infeasible virtual command can occur frequently due to aggressive maneuvers and limited control authority. This paper proposes a lightweight command scaling law for incremental flight control allocation. The method scales the raw incremental virtual command by a direction-preserving gain $K\in$ [0,1]. It is updated via gradient descent on a Lyapunov function that balances allocation error against deviation from unity gain. The proposed adaptive update law ensures the convergence of K to a value that corresponds to the attainable portion of infeasible commands, independent of the specific allocator used. At the same time, feasible virtual commands will be preserved. Its performance was evaluated through open-loop ray sweeps of the attainable moment set and closed-loop INDI simulations for a yaw-limited eVTOL. The results demonstrate that the adaptive scaling gain closely approximates the linear programming ground truth while offering significantly higher computational efficiency. Furthermore, it effectively mitigates cross-axis coupling, reduces peak excursions, and alleviates rotor saturation. These findings highlight the method’s effectiveness, modularity, and suitability for real-time implementation in aerospace applications. Full article

For vertical takeoff and landing (VTOL) control of distributed-propulsion, fixed-wing UAVs exhibiting strong nonlinearity and aerodynamic/propulsive coupling, traditional linearization methods incur significant modeling errors in pitch–roll coupling and vortex interference scenarios due to neglected high-order nonlinearities, leading to inherent control law limitations. This study focuses on a non-tilting, distributed-propulsion VTOL UAV featuring integrated airframe-propulsion design. Each of its four propulsion units contains six ducted rotors, arranged in tandem wing configuration on both fuselage sides. A revised propulsion–aerodynamic coupling model was established and validated through bench tests and CFD data, enabling the design of an Incremental Nonlinear Dynamic Inversion (INDI) control architecture. The UAV dynamics model was constructed in Matlab/Simulink incorporating this revised model. An INDI-based attitude control law was developed with cascade controllers (angular rate inner-loop/attitude outer-loop) for VTOL mode, integrated with propulsion-system and control-surface allocation strategies. Digital simulations validated the controller’s effectiveness and robustness. Finally, tethered flight tests with physical prototypes confirmed the method’s applicability for high-precision control of strongly nonlinear distributed-propulsion UAVs. Full article

Composite engine fan blades are critical aircraft engine components, and their failure can compromise the safe and reliable operation of the entire aircraft. To enhance aircraft availability and safety within a condition-based maintenance framework, effective methods are needed to identify damage and monitor the blades’ condition throughout manufacturing and operation. This paper presents a unique experimental framework for real-time monitoring of composite engine blades utilizing state-of-the-art structural health monitoring (SHM) technologies, discussing the associated benefits and challenges. A case study is conducted on a representative Foreign Object Damage (FOD) panel, a substructure of a LEAP (Leading Edge Aviation Propulsion) engine fan blade, which is a curved, 3D-woven Carbon Fiber Reinforced Polymer (CFRP) panel with a secondary bonded steel leading edge. The loading scheme involves incrementally increasing, cyclic 4-point bending (loading–unloading) to induce controlled damage growth, simulating in-operation conditions and allowing evaluation of flexural properties before and after degradation. External damage, simulating foreign object impact common during flight, is introduced using a drop tower apparatus either before or during testing. The panel’s condition is monitored in-situ and in real time by two types of SHM sensors: screen-printed piezoelectric sensors for guided ultrasonic wave propagation studies and surface-bonded Fiber Bragg Grating (FBG) strain sensors. Experiments are conducted until panel collapse, and degradation is quantified by the reduction in initial stiffness, derived from the experimental load-displacement curves. This paper aims to demonstrate this unique experimental setup and the resulting SHM data, highlighting both the potential and challenges of this SHM framework for monitoring complex composite structures, while an attempt is made at correlating SHM data with structural degradation. Full article

The optimal utilization of UAV-integrated photovoltaic (PV) systems demands accurate modeling that accounts for dynamic flight conditions. This paper introduces a novel computational intelligence-based framework that models the behavior of a moving PV system mounted on a UAV. A unique mathematical approach is developed to translate UAV flight dynamics, specifically roll, pitch, and yaw, into the tilt and azimuth angles of the PV module. To adaptively estimate the diode ideality factor under varying conditions, the Grey Wolf Optimization (GWO) algorithm is employed, outperforming traditional methods like Particle Swarm Optimization (PSO). Using a one-year environmental dataset, multiple machine learning (ML) models are trained to predict maximum power point (MPP) parameters for a commercial PV panel. The best-performing model, Rational Quadratic Gaussian Process Regression (RQGPR), demonstrates high accuracy and low computational cost. Furthermore, the proposed ML-based model is experimentally integrated into an incremental conductance (IC) MPPT technique, forming a hybrid MPPT controller. Hardware and experimental validations confirm the model’s effectiveness in real-time MPP prediction and tracking, highlighting its potential for enhancing UAV endurance and energy efficiency. Full article

Tailless unmanned aerial vehicles (UAVs) achieve high-agility maneuvers with flight control systems. The attainable moment set (AMS) provides critical theoretical foundations and constraints for their optimization. A computational method is proposed herein to address controllability limitations caused by nonlinear aerodynamic effectiveness. This method incorporates dual constraints on control surface angles and angular rates for the nonlinear AMS, aiming to meet the demands of attitude tracking dynamics in flight control systems. First, a quantitative model is established to correlate dual deflection constraints with aerodynamic moment amplitude and bandwidth limitations. Next, we construct a computational framework for the incremental attainable moment set (IAMS) based on differential inclusion theory. For monotonic nonlinear aerodynamic effectiveness, the vertices of the IAMS are updated using local interpolation, yielding the incremental nonlinear attainable moment set (INAMS). When non-monotonic nonlinearity occurs, stationary points are calculated to adjust the control effectiveness matrix and admissible control set, thereby reducing computational errors induced by non-monotonic characteristics. Furthermore, the effective actions set, derived from a time-varying incremental nonlinear attainable moment set, quantifies the residual moment envelope of tailless UAVs during maneuvers. Comparative simulations indicate that the proposed method achieves correct computation under nonlinear aerodynamic conditions while reliably determining safe flight boundaries during control failure. Full article

For the diverse payloads of Reusable Launch Vehicles and the inevitable problem of change in the center of mass, this paper proposes an incremental nonlinear dynamic inversion considering centroid variation control. Regarding the trans-atmosphere flight environment, the six-degree-of-freedom dynamics model considering centroid shift, Earth rotation, and the Clairaut Ellipsoid Model is established to improve model accuracy. An incremental nonlinear dynamic inversion considering a centroid variation controller with excellent dynamic performance and adjustment under the centroid variation is designed for the model, which fully meets the safety requirements of RLV reentry. An extended state observer considering centroid variation is proposed to solve the problem with difficult direct measurement of angular acceleration, which incorporates the influence of centroid variation into the known part to improve estimation accuracy and speed. Finally, the simulation results are provided to verify the robustness of the change of centroid position and good control quality with the proposed controller. Full article

This study presents the development of a real-time simulation model for electromechanical actuators tailored to a hybrid iron bird for next-generation regional turboprop aircraft. This iron bird is aimed at integrating real and virtual components, enabling advanced validation of flight control systems while balancing risk and cost. The mathematical models of actuators needed for the development and operation of the iron bird must comply with stringent requirements, especially in terms of computational cost. A novel two-step iterative methodology is proposed, combining bottom-up and top-down approaches. This process begins with simplified low-fidelity models. Then, the models are incrementally refined to capture complex dynamics while maintaining computational efficiency. Using the proposed approach, the computational time of the real-time model remained almost unvaried and consistent with the sampling frequency, while the number of state variables and the range of described phenomena grew significantly. The real-time model is validated against simulated data from a reference high-fidelity model and experimental data, achieving excellent agreement while reducing the computational time by 93%. The enhanced model incorporates selected failure modes equivalent models regarding the electric motor, power drive unit, and mechanical transmission, supporting possible future prognostics and health management (PHM) applications. These results showcase a scalable solution for integrating electromechanical actuation in modern aerospace systems, paving the way for full virtual iron birds and greener aviation technologies. Full article

This paper investigates the application of Incremental Nonlinear Dynamic Inversion (INDI) for launch vehicle flight control, addressing the limited exploration of nonlinear control architectures and their potential benefits in the context of the current “New Space” era. In this context, this study aims to bridge the gap between the launcher’s traditional linear control practice and nonlinear methods, focusing on INDI, which offers the potential to enhance limits of performance while reducing mission preparation (“missionisation”) efforts. INDI control commands incremental inputs by exploiting feedback acceleration estimates in a feedback-linearised plant in order to reduce model dependency, making it easier to design and resulting in a robust closed loop as compared to nonlinear dynamic inversion. The objective of this paper is therefore to demonstrate INDI’s implementation in a representative industrial launch ascent scenario, evaluate its strengths and limitations relative to industry standards, and promote its adoption within the launcher Guidance, Navigation, and Control (GNC) community. Comparative simulations with traditional scheduled PD controllers, with and without angular acceleration feedback, are highlighted together with several trade-offs. Furthermore, this paper presents a new and practical INDI stability analysis method as applied in the context of aerospace attitude control, as well as an augmentation of the design with an outer control loop for active load relief. Results indicate that while INDI exhibits increased sensitivity to sensor noise and actuator delays as compared to the linear controllers, its advantages in robustness and performance are significant. Notably, INDI’s ability to handle nonlinearities without extensive tuning and gain-scheduling surpasses the capabilities of the traditional linear control counterparts. These results highlight the potential of INDI as a more robust and efficient alternative to state-of-practice launcher control design methodologies. Full article

A flight controller formulation based on incremental nonlinear dynamics inversion (INDI) control with nonlinear disturbance observer (NDO) is proposed. INDI control is a nonlinear controller based on incremental dynamics. Aimed to attain robustness for nonlinear dynamics inversion (NDI)-based controller, incremental dynamics are derived using the first-order Talyor series expansion to nonlinear systems. The incremental dynamics-based controller requires information on state derivative terms to strengthen the robustness property of the nonlinear controller. The proposed controller utilizes the first-order low-pass filter to obtain the state derivative estimate to implement incremental dynamics into the system. Because the incremental form creates uncertainty term which is an aftermath of the Taylor series expansion, the proposed controller adopts the NDO to eliminate this effect. The controller is applied to the generic transport model which was developed by NASA for simulation purposes. The proposed NDO-based INDI control underwent simulations, together with an INDI controller without disturbance observer, and showed that the developed method results in better performances, providing important advantages where it compensates the uncertainties, removes the steady-state error, and shows less oscillating longitudinal body rate response than the baseline controller, desirable for aerodynamics applications with faster system response. Full article

The integration of propulsion and wing in distributed propulsion–wing UAVs (DPW UAVs) introduces significant propulsion-aerodynamic coupling, complicating dynamic modeling and flight control. This complexity is heightened by using induced wing surfaces for vertical takeoff and landing, requiring controllers to adapt to configuration changes and disturbances during transition flight. This paper develops a propulsion-aerodynamic coupling model for a medium-sized DPW UAV with induced wings (DPW-IW), enabling real-time aerodynamic performance calculations. Furthermore, a unified flight-control framework is proposed to avoid controller scheduling and switching during flight mode transitions. The proposed control framework employs the time-scale separation principle, divided into an outer loop and an inner loop. The outer loop uses a fuzzy controller to adjust allocation parameters, while the inner loop applies incremental nonlinear dynamic inversion (INDI) and control allocation (INCA) methods, providing robustness to nonlinear changes during flight transitions. Finally, simulations under various conditions demonstrate the controller’s effectiveness in ensuring smooth and robust transitions. Full article

This paper proposes an adaptive incremental nonlinear dynamic inversion (INDI) controller for unmanned aerial manipulators (UAMs). A novel adaptive law is employed to enable aerial manipulators to manage the inertia parameter changes that occur when the manipulator moves or picks up unknown objects during any phase of the UAM’s flight maneuver. The adaptive law utilizes a Kalman filter to estimate a set of weighting factors employed to adjust the control gain matrix of a previously developed INDI control law formulated for the corresponding UAV (no manipulator included). The proposed adaptive control scheme uses acceleration and actuator input measurements of the UAV without necessitating any knowledge about the manipulator, its movements, or the objects being grasped, thus enabling the use of previously developed INDI UAV controllers for UAMs. The algorithm is validated through simulations demonstrating that the adaptive control gain matrix used in the UAV’s INDI controller is promptly updated based on the UAM maneuvers, resulting in effective UAV and robot arm control. Full article

Incremental control strategies such as Incremental Nonlinear Dynamics Inversion (INDI) and Incremental Backstepping (IBKS) provide undeniable advantages for controlling Uncrewed Aerial Vehicles (UAVs) due to their reduced model dependency and accurate tracking capacities, which is of particular relevance for tail-sitters as these perform complex, hard to model manoeuvres when transitioning to and from aerodynamic flight. In this research article, a quaternion-based form of IBKS is originally deduced and applied to the stabilization of a tail-sitter in vertical flight, which is then implemented in a flight controller and validated in a Hardware-in-the-Loop simulation, which is also made for the INDI controller. Experimental validation with indoor flight tests of both INDI and IBKS controllers follows, evaluating their performance in stabilizing the tail-sitter prototype in vertical flight. Lastly, the tracking results obtained from the experimental trials are analysed, allowing an objective comparison to be drawn between these controllers, evaluating their respective advantages and limitations. From the successfully conducted flight tests, it was found that both incremental solutions are suited to control a tail-sitter in vertical flight, providing accurate tracking capabilities with smooth actuation, and only requiring the actuation model. Furthermore, it was found that the IBKS is significantly more computationally demanding than the INDI, although having a global proof of stability that is of interest in aircraft control. Full article

Incremental nonlinear dynamic inversion (INDI) is a widely used approach to controlling UAVs with highly nonlinear dynamics. One key element of INDI-based controllers is the control allocation realizing pseudo controls using available actuators. However, the tracking of commanded pseudo controls is not the only objective considered during control allocation. Since the approach only works locally due to linearization and the solution is often ambiguous, additional aspects like control efforts or penalizing the deviation of certain states must be considered. Conducting the control allocation by solving a quadratic program this results in a considerable number of weighting parameters, which must be tuned during control design. Currently, this is conducted manually and is therefore time consuming. An automated approach for tuning these parameters is therefore highly beneficial. Thus, this paper presents and evaluates a model-based approach automatically tuning the control allocation parameters of a tiltrotor VTOL using an optimization algorithm. This optimization algorithm searches for optimal parameters minimizing a cost functional that reflects the design target. This cost functional is calculated based on a test mission for the VTOL which is conducted within a simulation environment. The test mission represents the common operating range of the VTOL. The simulation environment consists of an aircraft model as well as a model of the INDI-based controller which is dependent on the control allocation parameters. On this basis, model-based optimization is conducted and the optimal parameters are identified. Finally, successful real-world tests on a 4-degrees-of-freedom testbench using the identified parameters are presented. Since the control allocation parameters can significantly influence the aircraft’s stability, the 4-DOF testbench for the aircraft is required for rapid validation of the parameters at a minimum amount of risk. Full article

An incremental deep deterministic policy gradient (IDDPG) algorithm is devised for the trajectory tracking control of a four-wing variable sweep (FWVS) aircraft with uncertainty. The IDDPG algorithm employs the line-of-sight (LOS) method for path tracking, formulates a reward function based on position and attitude errors, and integrates long short-term memory (LSTM) units into IDDPG algorithm to enhance its adaptability to environmental changes during flight. Finally, environmental disturbance factors are introduced in simulation to validate the designed controller’s ability to track climbing trajectories of morphing aircraft in the presence of uncertainty. Full article