Search Results (16)

Biofilm growth on silicone (Si) medical devices is routinely treated with antibiotics or device removal; however, new approaches are needed. The current work evaluates photothermal therapy (PTT) to augment antibiotic efficacy or directly ablate Staphylococcus aureus biofilms. The semiconducting polymer, Poly [4,4-bis(2-ethylhexyl)-cyclopenta [2,1-b;3,4 b’]dithiophene-2,6-diyl-alt22,1,3-benzoselenadiazole-4,7-diyl] (PCPDTBSe), with a high photothermal conversion efficiency of 53.2%, was formulated into nanoparticles (BSe NPs) and incorporated into Si. Nanocomposites were stimulated with 800 nm light to generate mild hyperthermic conditions of 42 °C, or ablative temperatures above 50 °C. PTT, with or without antibiotics, was deployed against two strains of Staphylococcus aureus biofilms, Xen 29 and Xen 40, followed by an evaluation of bacterial survival, biofilm regrowth, and differential disruption of specific biofilm components. Mild hyperthermia was also used in an in vivo model of silicone implant infection. The results demonstrate a 55–59% reduction in S. aureus when PTT plus antibiotic was used in vitro, and a 51% reduction in vivo. Higher temperatures effectively eradicate both Xen 29 and Xen 40 strains, with a longer exposure time using lower laser power being optimal. Hyperthermia inhibited biofilm regrowth in both strains, resulting in a > 3 log reduction, plus increased dead cells, polysaccharides, and eDNA in treated Xen 40 biofilms. These experiments demonstrate that nanocomposite-based PTT can both reduce viable bacteria and alter individual biofilm components. Full article

Effective ablative thermal protection systems are essential for ensuring the structural integrity of hypersonic vehicles subjected to extreme aerothermal loads. However, the microscopic reaction mechanisms at the gas–solid interface, particularly under non-equilibrium high-enthalpy conditions, remain poorly understood. This study employs reactive molecular dynamics (RMD) simulations with the ReaxFF-C/H/O force field to investigate the atomic-scale ablation behavior of a graphene-based knitted graphene structure impacted by atomic oxygen (AO). By systematically varying the AO incident kinetic energy (from 0.1 to 8.0 eV) and incidence angle (from 15° to 90°), we reveal the competing interplay between catalytic recombination and ablation processes. The results show that the catalytic recombination coefficient of oxygen molecules reaches a maximum at 5.0 eV, where surface-mediated O₂ formation is most favorable. At higher energies, the reaction pathway shifts toward enhanced CO and CO₂ production due to increased carbon atom ejection and surface degradation. Furthermore, as the AO incidence angle increases, the recombination efficiency decreases linearly, while C-C bond breakage intensifies due to stronger vertical energy components. These findings offer new insights into the anisotropic surface response of knitted graphene structures under hyperthermal oxygen exposure and provide valuable guidance for the design and optimization of next-generation thermal protection materials for hypersonic flight. Full article

Background/Objectives: Transcervical fibroid ablation (TFA) is an incisionless method to treat symptomatic uterine fibroids. While safety regarding future pregnancy remains to be established, TFA does not preclude the possibility of pregnancy, and a previous 36-patient case series of post-TFA pregnancies reported normal outcomes. That prior series did not include postmarket cases in the United States, as the Sonata^® System was initially cleared and used in Europe. This is a substantive update of known pregnancies with the Sonata System since June 2011, and includes pregnancies in Europe, Mexico, and the US. Methods: TFA was carried out under both clinical trial and postmarket use to treat symptomatic uterine fibroids. All post-TFA pregnancies reported by physicians with their patient’s consent were included. Results: 89 pregnancies and 55 deliveries have occurred among 72 women treated with the Sonata System. This includes 8 women who conceived more than once after TFA. Completed pregnancies (n = 62 women) include 19 vaginal deliveries, 35 Cesarean sections, 5 therapeutic abortions, 1 ectopic pregnancy, and 1 delivery by an unknown route. Ten pregnancies are ongoing. Mean birthweight was 3276.7 ± 587.3 g. Ten women experienced 18 first-trimester spontaneous abortions (SAbs), with 10 of the 18 SAbs (55.6%) occurring between two patients with a history of recurrent abortion. The SAb rate was 22.8%, inclusive of these two patients, and 10.1% if they were excluded as outliers. There were no instances of uterine rupture, placenta accreta spectrum, or stillbirth. Conclusions: This case series, the largest to date for any hyperthermic ablation modality, suggests that TFA with the Sonata System could be a feasible, safe treatment option regarding eventual pregnancy in women with symptomatic uterine fibroids. Full article

Irreversible electroporation (IRE) is a prominent non-thermal ablation method widely employed in clinical settings for the focal ablation therapy of solid tumors. Utilizing high-voltage, short-duration electric pulses, IRE induces perforation defects in the cell membrane, leading to apoptotic cell death. Despite the promise of irreversible electroporation (IRE) in clinical applications, it faces challenges concerning the coverage of target tissues for ablation, particularly when compared to other thermal ablation therapies such as radiofrequency ablation, microwave ablation, and cryoablation. This study aims to investigate the induced hyperthermal effect of IRE by applying a polydopamine nanoparticle (Dopa NP) coating on the electrode. We hypothesize that the induced hyperthermal effect enhances the therapeutic efficacy of IRE for cancer ablation. First, we observed the hyperthermal effect of IRE using Dopa NP-coated electrodes in hydrogel phantom models and then moved to in vivo models. In particular, in in vivo animal studies, the IRE treatment of rabbit hepatic lobes with Dopa NP-coated electrodes exhibited a two-fold higher increase in temperature (ΔT) compared to non-coated electrodes. Through a comprehensive analysis, we found that IRE treatment with Dopa NP-coated electrodes displayed the typical histological signatures of hyperthermal ablation, including the disruption of the hepatic cord and lobular structure, as well as the infiltration of erythrocytes. These findings unequivocally highlight the combined efficacy of IRE with Dopa NPs for electroporation and the hyperthermal ablation of target cancer tissues. Full article

Purpose: Hyperthermic ablation is a minimally invasive mode of tumour therapy which serves as a viable alternative to surgical intervention. However, one of the major drawbacks, besides the heat sink effect and the risk of damaging adjacent organs, is limited ablation size. The use of a cooling fluid during ablation has been shown to increase the ablation volume and decrease the carbonisation rate. The aim of this study was to investigate whether the composition of the cooling fluid has an effect on ablation size and carbonisation rate during hepatic laser ablation in an ex vivo bovine setting. Method: In this study bovine hepatic tissue was ablated in an ex vivo setting using an internally cooled laser applicator. A total of 45 tissue samples were assigned to three groups: 0.9% saline infusion (n = 15), distilled water infusion (n = 15) and a 50%/50% mixture of 0.9% saline and distilled water (n = 15). Ablation was conducted using a 1064 nm Nd:YAG laser at a wattage of 25 W and time interval of 10 min. The ablation volume and carbonisation rate were then measured and recorded through postprocedural MRI. One-way ANOVA and post-hoc testing were performed to assess the effect of the cooling fluid composition on the ablation volumes. Results: We found that using a mixture of saline and distilled water as a cooling fluid during hyperthermic ablation resulted in a larger ablation volume (mean ± SD: 22.64 ± 0.99 cm³) when compared to saline infusion (21.08 ± 1.11 cm³) or distilled water infusion (20.92 ± 0.92 cm³). This difference was highly significant (p < 0.001). There was no significant difference in ablation size between the saline group and the distilled water group. The highest carbonisation rate occurred in the saline group (12/15), followed by the mixed infusion group (3/15) and the distilled water group (1/15). Conclusions: The results of this study suggest that cooling fluid composition during hepatic laser ablation affects ablation volume in an ex vivo bovine setting. There was no statistically significant difference when comparing ablation volumes during saline infusion and distilled water infusion, but the carbonisation rate was significantly higher when using saline. The combination of saline and distilled water in a 50%/50% mixture as cooling fluid appears to be an auspicious alternative, as ablation volumes created with it are larger when compared to saline and distilled water alone, while carbonisation rate remains low. This might improve patient outcome as well as patient eligibility for hyperthermic ablation. Full article

This research focused on studying regularities in changes in strength characteristics and histological patterns of healthy tubular bone tissue depending on the temperature setting of hyperthermal treatment. Experimentation has established that heating the experimental bone sample in a temperature range of 60 to 70 °C does not cause any decline in strength characteristics compared to the control samples not subject to heat treatment. In compression tests (along the length of the bone), after heating the bone samples ex vivo to 80 °C, the strength characteristics were found to increase as the samples sustained a higher maximum stress. In bending tests, in contrast, the strength characteristics were reliably found to decrease in bone samples at 80 °C and 90 °C for the maximum stress indicator and 90 °C for the modulus of elasticity. Data obtained through histological examination further demonstrated statistically significant differences between the two temperature ranges of 60–70 °C and 80–90 °C, where semi-quantitative assessment revealed statistically significant differences in the markers of bone tissue destruction caused by hyperthermal treatment. Moderate (at 60–70 °C) and pronounced (at 80–90 °C) dystrophic and necrotic changes were observed both in the cells and the intercellular matrix of the tibia. From a practical point of view, the temperature range of 60–70 °C can be considered operational for thermal ablation since, at these temperatures, no statistically significant decline was observed for the strength characteristics in either the cross-section or length-section. Full article

We report non-contact laser-based Brillouin light-scattering (BLS) spectroscopy measurements of the viscoelastic properties of hyperthermally radiofrequency (RF)-heated and ablated bovine liver and chicken flesh tissues with embedded gold nanoparticles (AuNPs). The spatial lateral profile of the local surface temperature in the flesh samples during their hyperthermia was measured through optical backscattering reflectometry (OBR) using Mg–silica-NP-doped sensing fibers distributed with an RF applicator and correlated with viscoelastic variations in heat-affected and ablated tissues. Substantial changes in the tissue stiffness after heating and ablation were directly related to their heat-induced structural modifications. The main proteins responsible for muscle elasticity were denatured and irreversibly aggregated during the RF ablation. At T > 100 °C, the proteins constituting the flesh further shrank and became disorganized, leading to substantial plastic deformation of biotissues. Their uniform destruction with larger thermal lesions and a more viscoelastic network was attained via AuNP-mediated RF hyperthermal ablation. The results demonstrated here pave the way for simultaneous real-time hybrid optical sensing of viscoelasticity and local temperature in biotissues during their denaturation and gelation during hyperthermia for future applications that involve mechanical- and thermal-property-controlled theranostics. Full article

This work presents the first investigation of gold nanorods (GNRs)-based photothermal therapy of the pancreas tumor using the Monte Carlo-based code implemented with Geant4 Application for Emission Tomography (GATE). The model of a human pancreas was obtained by segmenting an abdominal computed tomography (CT) scan, and its physical and chemical properties, were obtained from experimental and theoretical data. In GATE, GNRs-mediated hyperthermal therapy, simple heat diffusion as well as interstitial laser ablation were then modeled in the pancreas tumor by defining the optical parameters of this tissue when it is loaded with GNRs. Two different experimental setups on ex vivo pancreas tissue and GNRs-embedded water were devised to benchmark the developed Monte Carlo-based model for the hyperthermia in the pancreas alone and with GNRs, respectively. The influence of GNRs on heat distribution and temperature increase within the pancreas tumor was compared for two different power values (1.2 W and 2.1 W) when the tumor was exposed to 808 nm laser irradiation and with two different laser applicator diameters. Benchmark tests demonstrated the possibility of the accurate simulating of NPs-assisted thermal therapy and reproducing the experimental data with GATE software. Then, the output of the simulated GNR-mediated hyperthermia emphasized the importance of the precise evaluation of all of the parameters for optimizing the preplanning of cancer thermal therapy. Simulation results on temperature distribution in the pancreas tumor showed that the temperature enhancement caused by raising the power was increased with time in both the tumor with and without GNRs, but it was higher for the GNR-load tumor compared to tumor alone. Full article

Glioblastoma (GBM) is an aggressive primary astrocytoma associated with short overall survival. Treatment for GBM primarily consists of maximal safe surgical resection, radiation therapy, and chemotherapy using temozolomide. Nonetheless, recurrence and tumor progression is the norm, driven by tumor stem cell activity and a high mutational burden. Focused ultrasound (FUS) has shown promising results in preclinical and clinical trials for treatment of GBM and has received regulatory approval for the treatment of other neoplasms. Here, we review the range of applications for FUS in the treatment of GBM, which depend on parameters, including frequency, power, pulse duration, and duty cycle. Low-intensity FUS can be used to transiently open the blood–brain barrier (BBB), which restricts diffusion of most macromolecules and therapeutic agents into the brain. Under guidance from magnetic resonance imaging, the BBB can be targeted in a precise location to permit diffusion of molecules only at the vicinity of the tumor, preventing side effects to healthy tissue. BBB opening can also be used to improve detection of cell-free tumor DNA with liquid biopsies, allowing non-invasive diagnosis and identification of molecular mutations. High-intensity FUS can cause tumor ablation via a hyperthermic effect. Additionally, FUS can stimulate immunological attack of tumor cells, can activate sonosensitizers to exert cytotoxic effects on tumor tissue, and can sensitize tumors to radiation therapy. Finally, another mechanism under investigation, known as histotripsy, produces tumor ablation via acoustic cavitation rather than thermal effects. Full article

Carbon nanotubes are a material with excellent properties, which result in a wide range of possible applications, from electronics to medicine. This paper presents the investigation of the possibility of Fe-MWCNTs’ application as heating agents for targeted thermal ablation of cancer cells, which could lead to the development of an innovative cancer treatment method. The article describes the process of synthesis of multi-walled carbon nanotubes filled with iron (Fe-MWCNTs) and provides an examination of their magnetic properties. Fe-MWCNTs were synthesized by catalytic chemical vapor deposition (CCVD). Relevant properties of the nanoparticles in terms of functionalization for biomedical applications were exploited and their magnetic properties were investigated to determine the heat generation efficiency induced by exposure of the particles to an external electromagnetic field. The reaction of the samples was measured for 40 min of exposure. The results showed an increase in sample temperature that was proportional to the concentration. Full article

Significant research efforts have been devoted in the past decades to accurately modelling the complex heat transfer phenomena within biological tissues. These modeling efforts and analysis have assisted in a better understanding of the intricacies of associated biological phenomena and factors that affect the treatment outcomes of hyperthermic therapeutic procedures. In this contribution, we report a three-dimensional non-Fourier bio-heat transfer model of cardiac ablation that accounts for the three-phase-lags (TPL) in the heat propagation, viz., lags due to heat flux, temperature gradient, and thermal displacement gradient. Finite element-based COMSOL Multiphysics software has been utilized to predict the temperature distributions and ablation volumes. A comparative analysis has been conducted to report the variation in the treatment outcomes of cardiac ablation considering different bio-heat transfer models. The effect of variations in the magnitude of different phase lags has been systematically investigated. The fidelity and integrity of the developed model have been evaluated by comparing the results of the developed model with the analytical results of the recent studies available in the literature. This study demonstrates the importance of considering non-Fourier lags within biological tissue for predicting more accurately the characteristics important for the efficient application of thermal therapies. Full article

Thermoablation is used in the treatment of tumorous bones. However, little is known about the influence such thermal treatment has on the mechanical properties of bone tissue. The purpose of this work was to study the influence of thermal treatment in a range of 60–100 °C (in increments of 10 °C) on the structural properties of pig femurs using an original approach that involved a periosteal arrangement of heating elements providing gradual dry heating of the bone from its periphery to its center. Heating of freshly extracted bone tissue segments was performed ex vivo using surface heaters of a Phoenix-2 local hyperthermia hardware system. Mechanical testing followed the single-axis compression scheme (traverse velocity of 1 mm/min). In the 60–90 °C range of heating, no attributes of reduced structural characteristics were found in the samples subjected to thermoablation in comparison to the control samples taken from symmetric areas of adjacent cylinders of healthy bones and not subjected to heat treatment. The following statistically significant changes were found as a result of compressing the samples to 100 °C after the heat treatment: reduced modulus of elasticity and increased elastic strain (strain-to-failure), mainly due to increases in plastic deformation. This finding may serve as evidence of a critical ex vivo change in the biomechanical behavior of bone tissues at such temperatures. Thus, ex vivo treatment of bone tissue in the thermal range of 60–90 °C may be used in studies of thermoablation efficiency against tumor involvement of bones. Full article

Combined therapy using photothermal and photodynamic treatments together with chemotherapeutic agents is considered one of the most synergistic treatment protocols to ablate hypoxic tumors. Herein, we sought to fabricate an in situ-injectable PEG hydrogel system having such multifunctional effects. This PEG hydrogel was prepared with (i) nab^TM-technique-based paclitaxel (PTX)-bound albumin nanoparticles with chlorin-e6 (Ce6)-conjugated bovine serum albumin (BSA-Ce6) and indocyanine green (ICG), named ICG/PTX/BSA-Ce6-NPs (~175 nm), and (ii) an albumin-stabilized perfluorocarbon (PFC) nano-emulsion (BSA-PFC-NEs; ~320 nm). This multifunctional PEG hydrogel induced moderate and severe hyperthermia (41−42 °C and >48 °C, respectively) at the target site under two different 808 nm laser irradiation protocols, and also induced efficient singlet oxygen (¹O₂) generation under 660 nm laser irradiation supplemented by oxygen produced by ultrasound-triggered PFC. Due to such multifunctionality, our PEG hydrogel formula displayed significantly enhanced killing of three-dimensional 4T1 cell spheroids and also suppressed the growth of xenografted 4T1 cell tumors in mice (tumor volume: 47.7 ± 11.6 and 63.4 ± 13.0 mm³ for photothermal and photodynamic treatment, respectively, vs. PBS group (805.9 ± 138.5 mm³), presumably based on sufficient generation of moderate heat as well as ¹O₂/O₂ even under hypoxic conditions. Our PEG hydrogel formula also showed excellent hyperthermal efficacy (>50 °C), ablating the 4T1 tumors when the irradiation duration was extended and output intensity was increased. We expect that our multifunctional PEG hydrogel formula will become a prototype for ablation of otherwise poorly responsive hypoxic tumors. Full article

The ability to predict heat transfer during hyperthermal and ablative techniques for cancer treatment relies on understanding the thermal properties of biological tissue. In this work, the thermal properties of ex vivo liver, pancreas and brain tissues are reported as a function of temperature. The thermal diffusivity, thermal conductivity and volumetric heat capacity of these tissues were measured in the temperature range from 22 to around 97 °C. Concerning the pancreas, a phase change occurred around 45 °C; therefore, its thermal properties were investigated only until this temperature. Results indicate that the thermal properties of the liver and brain have a non-linear relationship with temperature in the investigated range. In these tissues, the thermal properties were almost constant until 60 to 70 °C and then gradually changed until 92 °C. In particular, the thermal conductivity increased by 100% for the brain and 60% for the liver up to 92 °C, while thermal diffusivity increased by 90% and 40%, respectively. However, the heat capacity did not significantly change in this temperature range. The thermal conductivity and thermal diffusivity were dramatically increased from 92 to 97 °C, which seems to be due to water vaporization and state transition in the tissues. Moreover, the measurement uncertainty, determined at each temperature, increased after 92 °C. In the temperature range of 22 to 45 °C, the thermal properties of pancreatic tissue did not change significantly, in accordance with the results for the brain and liver. For the three tissues, the best fit curves are provided with regression analysis based on measured data to predict the tissue thermal behavior. These curves describe the temperature dependency of tissue thermal properties in a temperature range relevant for hyperthermia and ablation treatments and may help in constructing more accurate models of bioheat transfer for optimization and pre-planning of thermal procedures. Full article

Laser ablation (LA) is gaining acceptance for the treatment of tumors as an alternative to surgical resection. This paper reviews the use of lasers for ablative and surgical applications. Also reviewed are solutions aimed at improving LA outcomes: hyperthermal treatment planning tools and thermometric techniques during LA, used to guide the surgeon in the choice and adjustment of the optimal laser settings, and the potential use of nanoparticles to allow biologic selectivity of ablative treatments. Promising technical solutions and a better knowledge of laser-tissue interaction should allow LA to be used in a safe and effective manner as a cancer treatment. Full article