Search Results (81)

Self-powered monitoring systems capable of scavenging ambient mechanical energy are a highly desirable solution to eliminate the reliance on batteries and grid power in remote and distributed atmospheric sensing networks. However, the widespread adoption of such systems is severely hindered by the insufficient output power density of current energy harvesters, which struggle to simultaneously drive environmental sensors, data acquisition units, and wireless transmission modules. In this work, we report a highly integrated hybrid power generation system that couples a triboelectric nanogenerator (TENG) and an electromagnetic generator (EMG) to efficiently harvest low-frequency mechanical energy from the surroundings. Through systematic structural optimization and synergistic matching of the two transduction mechanisms, the device achieves an outstanding volumetric power density of 129.9 W·m⁻³, which represents one of the highest values ever reported for hybrid nanogenerators targeting self-powered environmental applications. The output characteristics of both the TENG and EMG units under varying load impedances are thoroughly characterized, revealing the optimal operating points for maximum power extraction. A tailored power management module, consisting of rectification, energy storage, and regulation circuits, is designed to convert the irregular alternating output into a stable direct-current supply. To demonstrate the practical viability of the system, we construct a complete self-powered atmospheric environment monitoring node, which integrates multiple environmental sensors, a data acquisition module, and a wireless transmission module. Driven exclusively by the hybrid TENG–EMG generator under ambient mechanical excitation, the node successfully performs real-time sensing, signal processing, and remote data communication without any external power input. This work not only provides a record-high power density among hybrid generators for environmental monitoring, but also establishes a feasible pathway toward maintenance-free, widely distributed, and truly autonomous atmospheric sensing networks. The presented strategy of maximizing volumetric power density through hybrid design and impedance engineering can be readily extended to other self-powered systems. Full article

Pyroelectric nanogenerators (PyNGs) have attracted extensive attention for converting thermal energy into electricity, yet their low output power remains a critical bottleneck hindering practical use. This review summarizes various pyroelectric materials and device structures, elucidates the working principle, and discusses their output performances and application scenarios. The correlation between device output and key factors, including intrinsic material properties, electrode dimensions, and external thermal excitation, is systematically examined. Hybrid nanogenerators (HNGs) that couple pyroelectric with piezoelectric, triboelectric, and photovoltaic effects are also reviewed. In addition, the evaluation criteria for pyroelectric energy conversion efficiency are examined, highlighting the need for more systematic studies in this aspect. Finally, key challenges and corresponding strategies are discussed to facilitate the practical deployment of PyNGs in areas such as wearable electronics and self-powered sensors. Full article

Rotor imbalance and abnormal vibration are classical operating conditions in rotating machinery and can often be identified by conventional vibration analysis. However, the development of low-power, self-powered, and distributed sensing nodes remains important for long-term condition monitoring, particularly in scenarios where external power supply, wiring, and maintenance are constrained. Existing vibration sensors, including piezoelectric and capacitive types, are constrained by power consumption and degraded performance under low-frequency and weak excitation. To address this issue, a magnetically repulsive cushion triboelectric nanogenerator (MRCT) is proposed to enable self-powered vibration sensing. The magnetic-repulsion cushion allows the upper friction layer to undergo stable contact–separation motion under a non-contact restoring force, while the microstructured strip electrode array (MSEA) enhances the triboelectric output and signal stability. A hybrid convolutional neural network–gated recurrent unit (CNN-GRU) deep-learning model is employed to extract time-domain and frequency-domain features from the collected signals, enabling real-time identification of rotor vibration amplitude, frequency, and imbalance weight. Experimental results show that the MRCT provides stable output, a high signal-to-noise ratio, and an identification accuracy above 98% for predefined rotor imbalance-weight states under laboratory conditions. In addition, a shaft-misalignment-related abnormal vibration condition was examined on the motor platform. The corresponding time-domain and frequency-domain analyses show that the MRCT voltage signal exhibits distinguishable signal variations under normal and misalignment-related conditions, including spectral changes around the 2× rotational frequency. A laboratory-scale AIoT-oriented demonstration further verifies the feasibility of integrating MRCT signal acquisition, CNN-GRU inference, wireless transmission, and GUI-based visualization. It should be noted that the present work mainly focuses on imbalance-state recognition, while the misalignment-related experiment provides an additional sensor-response verification. Broader validation involving mechanical looseness, bearing defects, variable-speed operation, cross-machine testing, and long-term industrial conditions remains necessary. Full article

The demand for flexible and wearable electronics has intensified the need for conformable, high-performance, and self-sustaining power sources. Flexible supercapacitors (FSCs) and flexible batteries (e.g., lithium-ion and lithium–sulfur) are promising owing to their high-power density, long cycle life, and mechanical flexibility. A transformative solution lies in integrating these storage devices with mechanical energy harvesters, particularly triboelectric nanogenerators (TENGs), to create autonomous self-charging power systems (SCPSs). TENGs exhibit high output, versatile operational modes, material flexibility, and efficient energy harvesting from body movements. This review provides an overview of the recent advances in flexible energy storage technologies, encompassing carbon-based materials, MXenes, polymers, metal oxides, metal–organic frameworks (MOFs), and their hybrid architectures. It discusses the synergistic integration of these storage devices with TENGs to realize multifunctional SCPSs. It also highlights the fundamental design principles of flexible devices, the critical interplay of materials and architecture, and the journey towards monolithic system integration. The review also underscores the importance of managing harvesters’ pulsed output for efficient storage. Finally, a critical analysis of the challenges, including the energy density–flexibility compromise, environmental stability, and safety, is presented, alongside a forward-looking perspective on commercialization pathways for these technologies to power the next generation of autonomous wearable and sustainable electronic systems. Full article

The harvesting of energy from movements is one of the purposes of triboelectric nanogenerators (TENGs). Among the various devices designed to perform this function, floors are one of the primary ones, as they do not need to be individually fitted to each subject and can be manufactured and installed on a large scale. This work classifies previously published TENG-based floors based on their materials, electrical performance in terms of the voltage, current, and power they produce, and their application in different fields. The materials used have been correlated with other important aspects for floors, such as weather or flame resistance, sustainability, recyclability or biodegradability of materials, and price. The synthesis of the variety of TENG-based floor models, which incorporate novel materials, hybrid technologies, or various functionalities, among other characteristics, can enrich and inspire the reader to enhance the performance of future floor designs based on the triboelectric effect. In addition, a novel triboelectric floor design made of nitrile butadiene rubber (NBR) and fluorine kautschuk material is presented, along with the electrical power generated when tribolayers are in contact. For the three floor strips measuring 40 cm long × 4 cm wide and 1 mm thick, electrical current and voltage output was measured, achieving nearly 0.1 W (20 V & 4.5 mA) of electrical power generation. Full article

This study investigates a low-frequency piezoelectric–electromagnetic–triboelectric hybrid vibration energy harvester designed to address the narrow operating bandwidth of conventional vibration energy harvesters. The integrated design comprises a piezoelectric-electromagnetic generator module based on a spiral cantilever beam and a triboelectric nanogenerator module, with the objective of capturing and amplifying energy generated through both resonant and stochastic vibrations. Theoretical frameworks and simulations, conducted using COMSOL Multiphysics software, are used to analyze key design parameters and device performance. The physical fabrication involves advanced manufacturing techniques such as 3D printing and CNC machining. Subsequent experimental testing validates the success of the hybrid approach, achieving a maximum averaged output power of 2.86 mW and a maximum energy conversion efficiency of 36.81%. These findings underscore the feasibility and efficacy of this study in expanding the frequency domain and enhancing power generation capacity. Full article

In this study, a material-driven strategy is presented to realize tunable triboelectric–electromagnetic hybrid generators while overcoming the form-factor limitations of conventional magnet-assisted systems. A magneto-dielectric hybrid generator (MDHG) was constructed using a soft magnetized dielectric composite, where NdFeB microparticles were embedded in an Ecoflex matrix and activated by pulse magnetization, allowing a single compliant layer to operate simultaneously as a triboelectric contact medium and a magnetic flux source coupled to a coil. The magnetic filler loading was systematically optimized to elucidate the trade-off between enhanced electromagnetic induction and a non-monotonic triboelectric response governed by dielectric polarization, surface potential, and interfacial energetics. To selectively strengthen the triboelectric branch without sacrificing electromagnetic output, nanoscale BaTiO₃ was introduced as an interstitial dielectric phase to promote polarization-active pathways and suppress screening-driven charge-utilization loss. Under contact–separation operation, the optimized MDHG produced triboelectric outputs up to a V_OC of 400.40 V and I_SC of 56.95 μA, while the electromagnetic branch delivered up to a V_OC of 260.04 mV and I_SC of 0.89 mA, corresponding to 2.87- and 2.62-fold increases in triboelectric V_OC and I_SC over pristine Ecoflex. Finally, the hybrid signatures enabled a wearable smart-skin interface capable of decoupling touch occurrence, intensity, and counter-material identity. Full article

The growing demand for sustainable and distributed energy solutions has driven increasing interest in triboelectric nanogenerators (TENGs) as platforms for energy harvesting and self-powered sensing. Biowaste-based triboelectric nanogenerators (BW-TENGs) represent an attractive strategy by coupling renewable energy generation with waste valorization under the principles of the circular bioeconomy. This review provides a comprehensive overview of BW-TENGs, encompassing fundamental triboelectric mechanisms, material categories, processing and surface-engineering strategies, device architectures, and performance evaluation metrics. A broad spectrum of biowaste resources—including agricultural residues, food and marine waste, medical plastics, pharmaceutical waste, and plant biomass—is critically assessed in terms of physicochemical properties, triboelectric behavior, biodegradability, biocompatibility, and scalability. Recent advances demonstrate that BW-TENGs can achieve electrical outputs comparable to conventional synthetic polymer TENGs while offering additional advantages such as environmental sustainability, mechanical compliance, and multifunctionality. Key application areas, including environmental monitoring, smart agriculture, wearable and implantable bioelectronics, IoT networks, and waste management systems, are highlighted. The review also discusses major challenges limiting large-scale deployment, such as material heterogeneity, environmental stability, durability, and lack of standardization, and outlines emerging solutions involving material engineering, hybrid energy-harvesting architectures, artificial intelligence-assisted optimization, and life cycle assessment frameworks. Full article

Ocean current energy, owing to its predictability and stability, is regarded as an ideal power source for distributed marine observation networks and underwater intelligent equipment. However, conventional ocean current energy devices that rely on rigid turbines and electromagnetic generators generally suffer from high cut-in flow velocity, bulky size, high maintenance costs, and significant environmental disturbance, making them unsuitable for deep-sea, miniaturized, and long-duration power supply scenarios. These limitations highlight the urgent need for flexible and low-speed energy harvesters capable of autonomous, long-term operation. In recent years, nanogenerator technology has provided new opportunities for distributed and low-power ocean current energy harvesting. PENGs and TENGs can directly convert weak mechanical energy into electricity, enabling energy harvesting in small-scale and low-velocity flow fields. PENGs offer high durability and mechanical robustness, whereas TENGs exhibit superior output performance in low-speed and intermittent flows. This paper provides a comprehensive review of structural designs, material innovations, interface engineering, hybrid energy-conversion architectures, and power-management strategies for PENG- and TENG-based ocean current energy harvesters. Overall, future progress will rely on the integration of intelligent materials, multi-field coupling mechanisms, and system-level engineering strategies to achieve durable, scalable, and autonomous ocean current energy harvesting for distributed marine systems. Full article

With the advancement of Internet of Things (IoT) technology, flexible sensors with dual optoelectronic sensing modes have emerged as a research hotspot for next-generation smart devices, further driving the urgent demand for environmentally friendly functional materials. Here, we innovatively integrated wastepaper recycling technology with a polyethyleneimine (PEI)-assisted pulping strategy to develop a novel cellulose-based sustainable photo-triboelectric hybrid nanogenerator (PT-HNG). Based on the working mechanism of a freestanding triboelectric nanogenerator (TENG), the PT-HNG can directly convert pressure stimuli into electrical energy and triboelectrification-induced electroluminescence (TIEL) signals. It achieves luminescence brightness of 0.06 mW cm⁻² (3.84 cd m⁻²) and simultaneously delivers excellent electrical output performance (172.4 V, 6.36 μA, 43.7 nC) under sliding motion. More importantly, compatible with existing industrial papermaking processes, the PT-HNG is scalable for large-scale production. By combining PT-HNG with deep learning algorithms, a handwritten e-book system based on trajectory recognition was constructed, with a recognition accuracy of up to 95.5%. In addition, real-time intelligent control of PowerPoint presentations via PT-HNG was demonstrated. This study provides a new pathway for converting wastepaper into intelligent products and presents a novel idea for the interdisciplinary integration of the circular economy and advanced electronic technology. Full article

Functionalized hydrogels represent an emerging class of smart materials being explored for advancing next-generation wearable technologies, owing to their flexibility, biocompatibility, stimuli-responsiveness, and tunable properties. This review provides an overview of recent developments in hydrogel-based wearables, highlighting their potential to enhance adaptive, multifunctional, and environmentally sustainable devices and textiles. It begins by examining progress in wearable sensors, energy storage and harvesting, biosignal monitoring, and smart textiles, as well as the associated challenges, including limited battery life, inadequate skin adhesion, user discomfort, and constrained functionality. The review further explores the synthesis, fabrication techniques, properties, and types of hydrogels tailored for wearable technologies, followed by a detailed discussion of their applications in smart batteries, supercapacitors, sensors, nanogenerators, fabrics and hybrid systems. It also highlights integrating artificial intelligence (AI) and the Internet of Things (IoT) to improve designs; enhance performance through real-time monitoring, data analytics, and user interaction; and expand functionality. Also, it analyzes key limitations of current hydrogels—particularly in energy density, dehydration resistance, fatigue behaviour, and large-scale reproducibility—and outlines strategies based on hierarchical material design, sustainable and biodegradable formulations, and standardized testing and regulatory alignment. The review concludes by affirming the role of hydrogel-based technologies in shaping the future of wearable innovations across healthcare, lifestyle, and beyond and outlines promising research directions. Full article

Triboelectric nanogenerators (TENGs) have emerged as efficient mechanical-energy harvesters with advantages—simple architectures, broad material compatibility, low cost, and strong environmental tolerance—positioning them as key enablers of self-powered systems. This review synthesizes recent progress in energy-storage interfaces, power management, and system-level integration for TENGs. We analyze how intrinsic source characteristics—high output voltage, low current, large internal impedance, and pulsed waveforms—complicate efficient charge extraction and utilization. Accordingly, this work highlights a variety of power-conditioning approaches, including advanced rectification, multistage buffering, impedance transformation/matching, and voltage regulation. Moreover, recent developments in the integration of TENGs with storage elements, cover hybrid topologies and flexible architectures. Application case studies in wearable electronics, environmental monitoring, smart-home security, and human–machine interfaces illustrate the dual roles of TENGs as power sources and self-driven sensors. Finally, we outline research priorities: miniaturized and integrated power-management circuits, AI-assisted adaptive control, multimodal hybrid storage platforms, load-adaptive power delivery, and flexible, biocompatible encapsulation. Overall, this review provides a consolidated view of state-of-the-art TENG-based self-powered systems and practical guidance toward real-world deployment. Full article

Polymer gel-based triboelectric nanogenerators (TENGs) have emerged as versatile platforms for self-powered sensing due to their inherent softness, stretchability, and tunable conductivity. This review comprehensively explores the roles of polymer gels in TENG architecture, including their function as triboelectric layers, electrodes, and conductive matrices. We analyze four operational modes—vertical contact-separation, lateral-sliding, single-electrode, and freestanding configurations—alongside key performance metrics. Recent studies have reported output voltages of up to 545 V, short-circuit currents of 48.7 μA, and power densities exceeding 120 mW/m², demonstrating the high efficiency of gel-based TENGs. Gel materials are classified by network structure (single-, double-, and multi-network), matrix composition (hydrogels, aerogels, and ionic gels), and dielectric medium. Strategies to enhance conductivity using ionic salts, conductive polymers, and nanomaterials are discussed in relation to triboelectric output and sensing sensitivity. Morphological features such as surface roughness, porosity, and micro/nano-patterning are examined for their impact on charge generation. Application-focused sections detail the integration of gel-based TENGs in health monitoring (e.g., sweat, glucose, respiratory, and tremor sensing), environmental sensing (e.g., humidity, fire, marine, and gas detection), and tactile interfaces (e.g., e-skin and wearable electronics). Finally, we address current challenges, including mechanical durability, dehydration, and system integration, and outline future directions involving self-healing gels, hybrid architectures, and AI-assisted sensing. This review expands the subject area by synthesizing recent advances and offering a strategic roadmap for developing intelligent, sustainable, and multifunctional TENG-based sensing technologies. Full article

A triboelectricity-enhanced piezoelectric nanogenerator (PENG) based on pressure-processed multi-electrospun polymeric layers is herein developed for efficient vibrational energy harvesting. The hybridization of piezoelectric and triboelectric mechanisms through electrospinning has been utilized to enhance electrical output by increasing contact areas and promoting alignment within piezoelectric materials. A multi-layer structure comprising alternating poly (vinylidene fluoride) (PVDF) and poly (hexamethylene adipamide) (PA 6/6) exhibits superior electrical performance. A lateral Janus configuration, providing distinct positive and negative triboelectric polarities, has further optimized device efficiency. This approach introduces a novel operational mechanism, enabling superior performance compared to conventional methods. The fiber-based architecture ensures exceptional flexibility, low weight, and a high surface-to-volume ratio, enabling enhanced energy harvesting. Experimentally, the PENG achieved an open-circuit voltage of 14.59 V, a short-circuit current of 205.7 nA, and a power density of 7.5 mW m⁻² at a resistance of 30 MΩ with a five-layer structure subjected to post-processing under pressure. A theoretical model has mathematically elucidated the output results. Long-term durability (over 345,600 cycles) has confirmed its robustness. Demonstrations of practical applications include monitoring human joint motion and respiratory activity. These results highlight the potential of the proposed triboelectricity-enhanced PENG for vibrational energy harvesting in flexible and wearable electronic systems. Full article

With the rapid growth of the Internet of Things, intelligent agriculture is becoming increasingly important. Traditional agricultural monitoring methods, which rely on fossil fuels and complex wiring, hinder progress. This work introduces a hybrid nanogenerator based on a rotational-swinging mechanism (RSM-HNG) that combines triboelectric nanogenerators (TENGs) and electromagnetic generators (EMGs) for efficient wind energy harvesting and smart agriculture monitoring. The parallelogram mechanism and motion conversion structure enable the stacking and simultaneous contact-separation of multiple TENG layers. Moreover, it allows the TENG and EMG units to operate simultaneously, which improves energy harvesting efficiency and extends the system’s lifespan compared to traditional disc-based friction wind energy harvesting methods. With four stacked layers, the short-circuit current of the TENG increases from 16 μA to 40 μA, while the transferred charge rises from 0.3 μC to 1.5 μC. By optimizing the crank angle, material selection, and substrate structure, the output performance of the RSM-HNG has been significantly enhanced. This technology powers a self-sustaining wireless monitoring system for temperature, humidity, an electronic clock, and road guidance. The RSM-HNG provides continuous energy for smart agriculture, animal husbandry, and environmental monitoring, all driven by wind energy. It holds great potential for regions with abundant wind resources but limited electricity access, offering valuable applications in these areas. Full article