Search Results (13)

A hybrid computational framework integrating the finite volume method (FVM) and finite difference method (FDM) is developed to solve two-dimensional, time-dependent nonlinear coupled Boussinesq-type equations (NCBTEs) based on Nwogu’s depth-integrated formulation. This approach models nonlinear dispersive wave forces acting on a stationary vessel and incorporates a frequency dispersion term to represent ship-wave generation due to a localized moving pressure disturbance. The computational domain is divided into two distinct regions: an inner domain surrounding the ship and an outer domain representing wave propagation. The inner domain is governed by the three-dimensional Laplace equation, accounting for the region beneath the ship and the confined space between the ship’s right side and a vertical quay wall. Conversely, the outer domain follows Nwogu’s 2D depth-integrated NCBTEs to describe water wave dynamics. Interface conditions are applied to ensure continuity by enforcing the conservation of volume flux and surface elevation matching between the two regions. The accuracy of this coupled numerical scheme is verified through convergence analysis, and its validity is established by comparing the simulation results with prior studies. Numerical experiments demonstrate the model’s capability to capture wave responses to simplified pressure disturbances and simulate wave propagation over intricate bathymetry. This computational framework offers an efficient and robust tool for analyzing nonlinear wave interactions with stationary ships or harbor structures. The methodology is specifically applied to examine the response of moored vessels to incident waves within Paradip Port, Odisha, India. Full article

The characterization of the lunar surface and subsurface through the utilization of synthetic aperture radar data has assumed a pivotal role in the domain of lunar exploration science. This investigation concentrated on the polarimetric analysis aimed at identifying water ice within a specific crater, designated Erlanger, located at the lunar north pole, which is fundamentally a region that is perpetually shaded from solar illumination. The area that is perpetually shaded on the moon is defined as that region that is never exposed to sunlight due to the moon’s slightly tilted rotational axis. These permanently shaded regions serve as cold traps for water molecules. To ascertain the presence of water ice within the designated study area, we conducted an analysis of two datasets from the Chandrayaan mission: Mini-SAR data from Chandrayaan-1 and Dual-Frequency Synthetic Aperture Radar (DFSAR) data from Chandrayaan-2. The polarimetric analysis of the Erlanger Crater, located in a permanently shadowed region of the lunar north pole, utilizes data from the Dual-Frequency Synthetic Aperture Radar (DFSAR) and the Mini-SAR. This study focuses exclusively on the L-band DFSAR data due to the unavailability of S-band data for the Erlanger Crater. The crater, identified by the PSR ID NP_869610_0287570, is of particular interest for its potential water ice deposits. The analysis employs three decomposition models—m-delta, m-chi, and m-alpha—derived from the Mini-SAR data, along with the H-A-Alpha model known as an Eigenvector and Eigenvalue model, applied to the DFSAR data. The H-A-Alpha helps in assessing the entropy and anisotropy of the lunar surface. The results reveal a correlation between the hybrid polarimetric models (m-delta, m-chi, and m-alpha) and fully polarimetric parameters (entropy, anisotropy, and alpha), suggesting that volume scattering predominates inside the crater walls, while surface and double bounce scattering are more prevalent in the right side of the crater wall and surrounding areas. Additionally, the analysis of the circular polarization ratio (CPR) from both datasets suggests the presence of water ice within and around the crater, as values greater than 1 were observed. This finding aligns with other studies indicating that the high CPR values are indicative of ice deposits in the lunar polar regions. The polarimetric analysis of the Erlanger Crater contributes to the understanding of lunar polar regions and highlights the potential for future exploration and resource utilization on the Moon. Full article

Water is one of the most precious resources and is essential to agricultural output; the biggest user of water is the agricultural sector. Several societal sectors are impacted by the problem of climate change, including agriculture, water resources, and irrigation water demand. A key element in determining sustainable crop production potential is choosing the right cultivars at the right time of year to plant. The dates on which maize is sown are greatly impacted by high summer temperatures and low spring temperatures. Water stress and the timing of sowing can have a significant impact on maize crop yield and water use efficiency. As a result, figuring out the ideal irrigation volume and sowing dates depending on local conditions is essential. A split plot layout was used to create a randomized complete block design for an experiment with five sowing dates (A, B, C, D, and E) and six hybrids (KWS3376, Xinyu 65, KWS9384, Huamei No. 1, Xinyu 102, and Heyu 187). All sowing dates and hybrids had a significant impact on the yield and yield-contributing features (leaf length, ear diameter, grain number per spike, grain breadth, hundred-grain weight, etc.) of maize crops according to the data analysis. A higher grain yield with yield features, such as ear length, number of grains per ear, and hundred-grain weight, was obtained with early-season sowing. Delayed seeding resulted in a lower crop yield. The seasonally delayed seeding of maize reduces yield and yield characteristics. Xinyu 65 produced the highest yield and yield component values of any hybrid. For improved yield and yield traits in the examined area, the study recommended planting maize hybrid Xinyu 65 early in the growing season. Full article

P4, a specific combination of dairy proteins (whey and casein) and plant-based protein isolates (pea and soy), has been shown to provide a more balanced amino acid (AA) profile than its single constituent proteins; however, less is known about how this translates to muscle protein synthesis (MPS). The aim of this study was to investigate the effect of P4 compared to whey or casein against fasted control on MPS. C57BL/6J mice, aged 25 months, were fasted overnight, followed by oral gavage of either whey, P4, casein, or water as a fasted control. Thirty minutes after ingestion, puromycin (0.04 µmol∙g⁻¹ bodyweight) was subcutaneously injected; 30-min thereafter, mice were sacrificed. MPS was measured by the SUnSET method, and signalling proteins were determined in the left-tibialis anterior (TA) muscle by the WES technique. AA composition was determined in plasma and right-TA muscle. Dried blood spots (DBS) were analysed for postprandial AA dynamics at 10, 20, 45, 60 min. MPS was 1.6-fold increased with whey (p = 0.006) and 1.5-fold with P4 compared to fasted (p = 0.008), while no change was seen with casein. This was confirmed by a significant increase of phosphorylated/total ratio of 4E-BP1 for both whey (p = 0.012) and P4 (p = 0.001). No changes were observed in p70S6K and mTOR phosphorylation/total ratio with whey or P4. Intramuscular leucine levels were lower for P4 (0.71 µmol∙g dry weight⁻¹) compared to whey (0.97 µmol∙g dry weight⁻¹) (p = 0.0007). Ten minutes postprandial, DBS showed significantly increased blood AA levels of BCAAs, histidine, lysine, threonine, arginine, and tyrosine for P4 versus fasted. In conclusion, a hybrid mix of dairy and plant-based proteins (P4) resulted in a MPS response that was similar to whey protein in aged mice after fasting. This suggests that other anabolic triggers beyond leucine or the well-balanced amino acid profile and bioavailability of the blend benefit stimulation of MPS. Full article

The purpose of this work is to offer a unique theoretical ternary nanofluid (graphene/tungsten oxide/zirconium oxide) framework for better heat transfer. This model describes how to create better heat conduction than a hybrid nanofluid. Three different nanostructures with different chemical and physical bonds are suspended in water to create the ternary nanofluid (graphene/tungsten oxide/zirconium oxide). Toxic substances are broken down, the air is purified, and other devices are cooled thanks to the synergy of these nanoparticles. The properties of ternary nanofluids are discussed in this article, including their thermal conductivity, specific heat capacitance, viscosity, and density. In addition, heat transport phenomena are explained by the Cattaneo–Christov (CC) heat flow theory. In the modeling of the physical phenomena under investigation, the impacts of thermal nonlinear radiation and velocity slip are considered. By using the right transformations, flow-generating PDEs are converted into nonlinear ordinary differential equations. The parameters’ impacts on the velocity and temperature fields are analyzed in detail. The modeled problem is graphically handled in MATLAB using a numerical technique (BVP4c). Graphical representations of the important factors affecting temperature and velocity fields are illustrated through graphs. The findings disclose that the performance of ternary nanofluid phase heat transfer is improved compared to dusty phase performance. Furthermore, the magnetic parameter and the velocity slip parameter both experience a slowing-down effect of their respective velocities. Full article

In this article, energy optimization of the cooling system of IKEA Budaörs is carried out. The cooling system is served by a centrifugal water chiller and includes a large-volume cooling buffer tank. The facility operates the hydraulic system of the buffer storage tank only during the transitional period. The main goal is to reduce energy consumption by changing the operating strategy of the existing system. To test the operating strategies, the operation and the thermal load of the shopping center during the summer season had to be simulated to find the best operation strategy. A hybrid method (real data and calculated values) was used in the simulation. The three operating scenarios examined show that the annual energy consumption and the number of operating hours of the chiller can be reduced by using the buffer tank with the right strategy. In the examined scenarios, a 30% energy improvement was achieved. The possibility of using a buffer tank is significantly limited by the fact that the heat exchangers were sized for low forward water temperatures. By re-sizing the heat exchangers, the utilization of the buffer tank could be considerably improved in conditions close to peak heat load. Full article

High grain water content at harvest stage is the main limiting factor for realizing mechanized maize grain harvest in China. Under the background of yield gain by density increase, it is necessary to clarify the effect of planting density increase on maize grain dehydration characteristics, which would provide theoretical support for realizing mechanized grain harvest under high planting density conditions. Therefore, this study selects five main hybrids, ZD2, DY13, YD13, XY335, and DH618, released in different eras that were widely promoted in Inner Mongolia from the 1970s to 2010s. The experiment was conducted in the Chilechuan Modern Agriculture Expo Park, Tumed Right Banner, Baotou city, Inner Mongolia, in 2018 and 2019. Under the three densities of 45,000 plants ha⁻¹ (low density), 75,000 plants ha⁻¹ (medium density) and 105,000 plants ha⁻¹ (high density), the indexes of grain dehydration, leaf stay-green, bract and cob dehydration of the different maize hybrids were measured and analyzed. The results show that MCpm (moisture content at physiological maturity) of hybrids in the 1970s and 1990s was significantly reduced by 1.57 and 1.14 percentage points, respectively, and MCh (moisture content at harvest time) in the harvest period of hybrids in the 1970s was significantly reduced by 0.99 percentage points, from a low to medium density. The GDRbm (rate of grain dehydration before maturation) and the GDRam (rate of grain dehydration after maturation) showed an increasing trend from a low to medium density. From a medium to high density, the MCpm from the 1980s to 2000s could be significantly reduced by 1.78, 1.53 and 1.88 percentage points; the MCh from the 1980s could be significantly reduced by 1.77 percentage points; and the GDRbm from the 1970s was significantly increased by 0.101%/d, but the improvement of GDRam was not significant. With the planting density increase, the decreased ratios of relative GLAD (green leaf area duration) and leaf SPAD (soil and plant analyzer development) per plant of old maize hybrids were more than that of modern maize hybrids, which promoted the decrease in grain water content and the rate increase in grain dehydration for old maize hybrids. There was a direct positive correlation between the bract and grain dehydration rates, but the cob dehydration rate had no significant effect on the grain dehydration rate. With the increase in planting density, the relative GLAD and leaf SPAD values of plants decreased, and the stay-green of plants worsened, and a significant increase in the dehydration rate of bracts in old and modern eras was an important reason for the decrease in grain moisture content and increase in dehydration rate. Full article

Expanding cities means increasing the need for energy in the residential sector. The supply of this energy must be in environmentally friendly ways; one method of meeting demand in the residential sector is the use of combined cooling, heating, and power (CCHP) systems. The current review paper shows that due to the high cost of gas and electricity, CCHP can be used in various sectors, such as hospitals and airports, to reduce energy consumption with lower environmental impacts by using renewable energy systems as the main driver. While CCHP systems are not feasible in tropical regions with high cooling demand, a solar hybrid system is a superior candidate for regions with sufficient radiation. CCHP can also be used in sectors such as wastewater treatment units, desalination systems, and hydrogen production units to improve performance and increase productivity. The carbon and water footprints of CCHP systems are discussed in detail. The main drivers for reducing carbon and water footprints are improving system components such as the combustion engine and increasing productivity by expanding the system to multi-generation systems. Finally, the carbon tax index can help reduce carbon emissions if properly used in the right context. Based on our best knowledge, there is no extensive review of the environmental aspects of CCHP systems in the literature. Full article

Providing everyone with safe drinking water is a moral imperative. Yet, sub-Saharan Africa seems unable to achieve “safe drinking water for all” by 2030. This sad situation calls for a closer examination of the water supply options for both rural and urban populations. Commonly, two main aspects are considered: (1) behavioural responses to available or potential water supply options, and (2) socio-economic acceptability. These aspects determine the feasibility and the affordability of bringing safe drinking water as a basic good and human right to everyone. There is a broad consensus that achieving the UN Sustainable Development Goal 6.1 is mostly a financial issue, especially in low-income settings. This communication challenges this view as water is available everywhere and affordable treatment options are well-known. It considers the decentralized water supply model as a reference or standard approach in low-income settings rather than as an alternative. Here, the medium-sized city of Bangangté in the western region of Cameroon is used to demonstrate that universal safe drinking water will soon be possible. In fact, during the colonial period, the residences of the elite and the main institutions, including the administrative quarter, churches, and hospital, have been supplied with clean water from various local sources. All that is needed is to consider everyone as important or accept safe drinking water as human right. First, we present a historical background on water supply in the colonial period up to 1980. Second, the drinking water supply systems and water demand driven by population growth are discussed. Finally, a hybrid model for the achieving of universal access to clean drinking water, and preconditions for its successful implementation, are presented. Overall, this communication calls for a shift from safe drinking water supply approaches dominated by centralized systems, and presents a transferable hybrid model to achieve universal clean drinking water. Full article

Water shortage has become a serious problem in the world, and low water efficiency is the key to industrial and agricultural production and sustainable economic development. Based on the data of 30 provinces (municipalities) in China from 2010 to 2017, this study builds a DEA model based on the hybrid network structure of water systems to measure water resource utilization efficiency and uses a difference-in-differences (DID) model to examine the effects of the water rights trading policy on water resource utilization efficiency. We find that the water rights trading policy can significantly promote the total water efficiency of the water resources system and the initial water use efficiency, and after a series of robustness tests, the result is still valid. Further analysis indicates that the policy effect changes with the adjustment of the industrial and agricultural water use structure. Moreover, the dynamic impact of water rights trading policy on water resource utilization efficiency is still significant. This study provides macroscopic evidence for evaluating the effects of China’s water rights trading policy and offers new ideas and experiences for improving China’s water resource utilization efficiency. Full article

Synthetic Aperture Radar (SAR) has been used in characterizing intertidal zones along northern Canadian coastlines. RADARSAT-2, with its full polarimetric information, has been considered for monitoring these vulnerable ecosystems and helping enhance the navigational safety of these waters. The RADARSAT Constellation Mission (RCM) will ensure data continuity with three identical SAR satellites orbiting together, providing superior revisit capabilities. The three satellites are equipped with multiple configurations, including single-polarization (HH, HV, VV), conventional (HH-HV, VV-VH, and HH-VV), hybrid (i.e., compact) dual polarization, and fully polarimetric (FP) modes. This study investigates the potential of the compact polarimetric (CP) mode for mapping an intertidal zone located at Tasiujaq village on the southwest shore of Ungava Bay, Quebec. Simulated RCM data were generated using FP RADARSAT-2 images collected over the study site in 2016. Commonly used tools for CP analysis include Raney m-delta classification and the hybrid dual polarizations RH-RV (where the transmitter is right-circular and the receivers are horizontal and vertical linear polarizations) and RR-RL (where the transmitter is right circular and the receivers are right-circular and left-circular polarizations). The potential of CP is compared with single, conventional dual-pol, and FP. The Freeman–Durden and Touzi discriminators are used for FP analysis. The random forest classifier is used as a classification approach due to its well-documented performance compared to other classifiers. The results suggest that the hybrid compact (RR-RL and RH-RV) dual polarizations provide encouraging separability capacities with overall accuracies of 61% and 60.7%, respectively, although they do not perform as well as conventional dual-pol HH-HV (64.4%). On the other hand, the CP polarimetric m-delta decomposition generated slightly less accurate classification results with an overall accuracy of approximately 62% compared to the FP Freeman–Durden (67.08%) and Touzi discriminators (71.1%). Full article

Water-permit systems are widely used across Africa as a blanket requirement for small and micro irrigation enterprises, as well as large enterprises. The present study aimed to, first, further understand the implications of permit systems for both the most vulnerable and the state, and, second, based on the findings, identify options for pro-poor water legislation that also meet the water governance requirements of the state. The growing recognition of the importance of farmer-led irrigation development for food security across the continent underlines the importance of these questions. Focusing on Kenya, Malawi, South Africa, Uganda, Zimbabwe, and other African countries, we found that permit systems criminalized instead of protected the water rights of small-scale farmers. Moreover, little if any attention is paid to the logistical burdens and costs to the state of implementing such systems relative to the intended revenue generation. As many small-scale farmers in Africa were found to operate under customary land and water tenure systems, the study proposes a hybrid system of water rights that formally recognizes such practices, along with the use of permits, including enforcement of conditions for large users, to serve the interests of both the state and small-scale farmers. Full article

Deep placement of gel in waterflooded hydrocarbon reservoirs may block channels with high water flow and may divert the water into other parts of the reservoir, resulting in higher oil production. In order to get the gel constituents to the right reservoir depths, a delay in the gelling time in the order of weeks at elevated temperatures will be necessary. In this work, a methodology for controlled gelation of partially hydrolyzed polyacrylamide using hybrid nanomaterials with functional groups as cross-linkers was developed. Two delay mechanisms with hybrid materials and polyelectrolyte complexes were designed and tested. Both mechanisms could significantly delay the gelation rate, giving gelling times ranging from several days to several weeks in synthetic sea water at 80 °C. Gelling experiments in sandstone cores showed that gel strength increased with aging time. For long aging times, strong gels were formed which resulted in almost no water permeability. A series of coreflooding experiments with polymer and deactivated nanomaterial were performed. In addition to differential pressures and concentration profiles, the experiments enabled calculation of retention and inaccessible pore volumes. A novel numerical model of 1D two-phase flow has been developed and tested with results from core flooding experiments. The model can track the age distribution and concentrations of the nanomaterial (and therefore water viscosity) throughout the porous medium at every time step. The model generated a good fit of experimental results. Full article