Search Results (564)

The problem of choosing an electric generator in order to increase the reliability and continuity of energy supply to households in Ukraine was considered. It was shown that this choice is made under conditions of uncertainty. The methods of choosing alternatives to technical systems under conditions of uncertainty, based on axiomatic, heuristic and verbal decision-making methods described in the sources, were analyzed, and the Analytical Hierarchical Process (AHP) was selected to develop a model for choosing an electric generator. The technical, economic, operational and ergonomic criteria for choosing an electric generator were justified. The novelty of the article lies in the use of the developed structural hierarchical model for choosing an electric generator for a household, and the selection of the appropriate generator option for a household was carried out using the AHP. The selected F3001 generator model is characterized by the highest value of the generalized weighting factor due to the impact of estimates based on economic and operational criteria. The use of the cogeneration unit in an agricultural biogas plant was also indicated—as an alternative to household energy supply. Full article

Household appliances constitute the second largest source of residential energy consumption in China, accounting for over 20% of the total and exhibiting a steady growth trend. Despite their substantial impact on energy demand and carbon emissions, a comprehensive analysis of the current status and future trends of household appliances in China is still lacking. This study employs the Long-Range Energy Alternatives Planning (LEAP) system to model energy consumption and carbon emissions for five major household appliances (air conditioners, refrigerators, washing machines, TVs, and water heaters) from 2022 to 2052. Three scenarios were analyzed: a Reference (REF) scenario (current trends), an Existing Policy Option (EPO) scenario (current energy-saving measures), and a Further Strengthening (FUR) scenario (enhanced efficiency measures). Key results show that by 2052, the EPO scenario achieves cumulative savings of 1074.8 billion kWh and reduces emissions by 580.7 million metric tons of CO₂ equivalent compared to REF. The FUR scenario yields substantially greater benefits, demonstrating the significant potential of strengthened policies. This analysis underscores the critical role of improving appliance energy efficiency and provides vital insights for policymakers and stakeholders aiming to reduce residential sector emissions. Full article

Global building energy consumption is significantly increasing. Utilizing renewable energy sources may be an effective approach to achieving low-carbon and energy-efficient buildings. A combined system incorporating solar photovoltaic–thermal (PV/T) components with an air-source heat pump (ASHP) was studied for simultaneous heating and power generation in a real residential building. The back panel of the PV/T component featured a novel polygonal Freon circulation channel design. A prototype of the combined heating and power supply system was constructed and tested in Fuzhou City, China. The results indicate that the average coefficient of performance (COP) of the system is 4.66 when the ASHP operates independently. When the PV/T component is integrated with the ASHP, the average COP increases to 5.37. On sunny days, the daily average thermal output of 32 PV/T components reaches 24 kW, while the daily average electricity generation is 64 kW·h. On cloudy days, the average daily power generation is 15.6 kW·h; however, the residual power stored in the battery from the previous day could be utilized to ensure the energy demand in the system. Compared to conventional photovoltaic (PV) systems, the overall energy utilization efficiency improves from 5.68% to 17.76%. The hot water temperature stored in the tank can reach 46.8 °C, satisfying typical household hot water requirements. In comparison to standard PV modules, the system achieves an average cooling efficiency of 45.02%. The variation rate of the system’s thermal loss coefficient is relatively low at 5.07%. The optimal water tank capacity for the system is determined to be 450 L. This system demonstrates significant potential for providing efficient combined heat and power supply for buildings, offering considerable economic and environmental benefits, thereby serving as a reference for the future development of low-carbon and energy-saving building technologies. Full article

This study contributes to the broader sustainability discourse by evaluating public knowledge, awareness, and practices regarding air pollution among residents of Hanoi, Vietnam, focusing on its causes, health impacts, and mitigation strategies. A cross-sectional survey was conducted with 521 individuals in suburbs around Hanoi. A multistage sampling technique, combining cluster and simple random sampling, was used for participant recruitment. Three central and three suburban districts of Hanoi were randomly selected as clusters. One individual from each household was invited to participate and answer a structured survey, which assessed perceptions of air pollution, its human-induced causes, recognised health impacts, and individual and community-level mitigation behaviours. Nearly all participants (98.3%) were aware of air pollution, with 65.3% attributing it to human activities and 61.2% recognising specific air pollutants as primary contributors. The majority (93.9%) acknowledged health impacts, citing respiratory infections (55.1%) and sinus issues (51.2%) as prevalent concerns. Vulnerable groups, such as children under 5 (82.3%) and adults over 65 years old (77.4%), were identified as disproportionately affected. Social media (68.9%) and television (58.3%) were the dominant sources of information. Despite a recognition of air pollution’s importance (98.5%), there was limited engagement in systemic sustainability actions, such as supporting renewable energy initiatives. Most participants (84.3%) reported personal mitigation efforts, including energy-saving practices (35.5%) and walking instead of driving a car or bike (35.3%). While awareness of air pollution and its health impacts is high among Hanoi residents, proactive engagement in systemic solutions remains limited. Policymakers should prioritise community-based programs, public–private partnerships, sustainability education, and culturally tailored policy interventions to bridge gaps between awareness and action. Tailored interventions addressing demographic and cultural factors are essential to fostering socio-environmental sustainability in rapidly urbanising contexts. Full article

Rural areas around the world are increasingly dealing with energy and environmental challenges. These challenges are particularly acute in developing countries, where persistent reliance on traditional energy sources—such as wood fuel—intersects with concerns about forest conservation and energy sustainability. While wood fuel use is often portrayed as unsustainable, it is important to acknowledge that much of it remains ecologically viable and socially embedded. This study explores the role of rural entrepreneurs in shaping low-carbon transitions at the intersection of household energy practices and environmental stewardship. Fieldwork was carried out in four rural Zambian communities in 2016 and complemented by 2024 follow-up reports. It examines the connections between household energy choices, greenhouse gas emissions, and forest resource dynamics. Findings reveal that over 60% of rural households rely on charcoal for cooking, with associated emissions estimated between 80 and 150 kg CO₂ per household per month. Although this is significantly lower than the average per capita carbon footprint in industrialized countries, such emissions are primarily biogenic in nature. While rural communities contribute minimally to global climate change, their practices have significant local environmental consequences. This study draws attention to the structural constraints as well as emerging opportunities within Zambia’s rural energy economy. It positions rural entrepreneurs not merely as policy recipients but as active agents of innovation, environmental monitoring, and participatory resource governance. A model is proposed to support sustainable rural energy transitions by aligning forest management with context-sensitive emissions strategies. Full article

The amount of waste generated by society is constantly increasing. Consequently, there is a need to develop new and better methods of treating it. A significant part of municipal waste is biowaste, which can be treated as a source of valuable resources such as nutrients, organic matter, and energy. The present work aims to determine the properties of the tested household biowaste and the possibility of using it as feedstock in slow pyrolysis to obtain biochar. The slow pyrolysis process of the biowaste was carried out in an electrically heated Horizontal Tube Furnace (HTF) at temperatures of 400 °C, 500 °C, and 600 °C in a nitrogen atmosphere. The analysis showed that depending on the type and composition of the biowaste, its properties are different. All the biowaste tested has a high moisture content (between 63.51% and 81.53%), which means that the biowaste needs to be dried before the slow pyrolysis process. The characteristics of kitchen biowaste are similar to those of food waste studied by other researchers in different regions of the world. In addition, the properties of kitchen biowaste are similar to those of the typical biomasses used to produce biochar via slow pyrolysis, such as wood, almond shells, and rice husks. Both kinds of garden biowaste tested may have been contaminated (soil, rocks) during collection, which affected the high ash content of spring (17.75%) and autumn (43.83%) biowaste. This, in turn, affected all the properties of the garden biowaste, which differed significantly from both the literature data of other garden wastes and from the properties of typical biomass feedstocks used to produce biochar in slow pyrolysis. For all biowaste tested, it was shown that as the pyrolysis temperature increases, the yield of biochar decreases. The maximum mass yield of biochar for kitchen, spring garden, and autumn garden biowaste was 36.64%, 66.53%, and 66.99%, respectively. Comparing the characteristics of biowaste before slow pyrolysis, biochar obtained from kitchen biowaste had a high carbon content, fixed carbon, and a higher HHV. In contrast, biochar obtained from garden biowaste had a lower carbon content and a lower HHV. Full article

This paper analyzes annual energy production data in Kosovo and explores the potential benefits of introducing natural gas as an energy source. The study compares current coal-based energy production with natural gas in terms of not only financial impact but also environmental pollution and public health. The focus is on evaluating financial sustainability by assessing production costs and consumption effects, particularly the potential for expense reduction through natural gas adoption. A financial module analysis was applied, comparing energy prices from coal and natural gas sources. Special emphasis was placed on household economic benefits, return on investment, and reduced energy costs. With the integration of natural gas, household energy expenses could decrease from €0.12 to €0.10 per unit, resulting in estimated national savings of approximately €60 million per year. The investment evaluation was conducted using methodologies grounded in relevant case studies and price differentials in the energy market. Full article

The increasing need for efficient energy consumption monitoring, driven by economic and environmental concerns, has made Non-Intrusive Load Monitoring (NILM) a cost-effective alternative to traditional measurement methods. Despite its progress since the 1980s, NILM still lacks standardized benchmarks, limiting objective performance comparisons. This study introduces several key contributions: (1) the development of five new converters with 13-digit timestamp support and harmonic inclusion, improving the data collection accuracy by up to 25%; (2) the implementation of an advanced disaggregation software, achieving a 10–15% increase in the F1-score for certain appliances; (3) a detailed analysis of harmonics’ impact on NILM, reducing the Mean Normalized Error in Assigned Power by up to 40%; and (4) the design of open-source measurement hardware to enhance reproducibility. This study also evaluates open hardware platforms and compares five common household appliances using NILM Toolkit metrics. Results demonstrate that open hardware and software foster reproducibility and accelerate innovation in NILM. The proposed approach contributes to a standardized and scalable NILM framework, facilitating real-world applications in energy management and smart grid optimization. Full article

This paper analyzes the process of energy transition from traditional solid fuel heating to an air-to-air (A2A) heat pump-based heating system. Special emphasis was placed on the implementation of new technologies for improved management of energy systems, aiming to elevate both comfort levels and energy efficiency. This paper explores the use of the open-source software Home Assistant as an integration platform for home automation, designed to manage smart home devices while preserving local control, user privacy, and increasing cybersecurity. The proposed hardware platform includes a Raspberry Pi with appropriate IoT modules, providing a flexible and economically viable solution for household needs. Full article

In the housing sector emission reduction builds on a shift from fossil fuels to renewable energy sources and increasing the efficiency of energy usage, with heating playing a dominant role in comparison to that of electricity. For electricity production in the residential sector, research shows that different settings of (co-)ownership in renewables are linked to a greater tendency to invest in energy-efficient devices or to adopt more energy-conscious behaviours. The empirical analysis demonstrates that fully-fledged prosumers, i.e., consumers who have the option to choose between self-consumption and selling to third parties or the grid, exhibit a higher tendency to invest in energy efficiency and that only this group manifests a greater likelihood of engaging in conscious-energy consumption behaviour. This paper extends the analysis to include heating in the residential sector. The study conducted an ANCOVA based on a sample of 2585 German households. The findings show that, depending on the (co-)ownership setting, the willingness to invest and to adopt energy-efficient practices grows considerably. Consumer-sellers demonstrate the highest willingness to invest and adapt energy conscious behaviour. Furthermore, regarding heating in particular, self-consumers are also inclined to invest and engage in energy-savings behaviour. Full article

Cowpea, Vigna sp., is an important, low-cost protein source in subtropical and semi-arid regions, where seasonal rainfall makes storage necessary. However, the weevils Callosobruchus maculatus and C. chinensis cause significant grain losses during storage. While synthetic fumigants are commonly used to control these pests, their risks to mammals have prompted the search for safer alternatives. In this context, we tested palo santo, Bursera graveolens, essential oil with limonene, α-phellandrene, o-cymene and β-phellandrene, menthofuran, and germacrene-D as a sustainable approach. This plant is readily accessible, produces high fruit yields, and is used in households for various purposes. We evaluated the fumigant toxicity, repellency, and ovicidal effects of B. graveolens essential oil on both Callosobruchus species. Our results showed that B. graveolens oil was toxic to C. maculatus (LC₅₀ = 80.90 [76.91–85.10] µL) and C. chinensis (LC₅₀ = 63.9 [60.95–66.99] µL), with C. chinensis being more susceptible (SR = 1.27). Molecular docking analyses revealed that all the oil’s compounds bind to both the GABA and octopamine receptors, exhibiting high energy affinities; however, germacrene shows the strongest affinity in these receptors. C. chinensis was strongly repelled at all concentrations, while C. maculatus was repelled only at lethal concentrations. No ovicidal effect was observed in either species. In conclusion, our findings suggest that B. graveolens essential oil is a promising and sustainable protectant for stored cowpeas in small-scale storage units. Full article

Energy poverty continues to be a critical challenge, and this requires efficient and scalable identification methods to support targeted interventions. The Low Income Low Energy Efficiency (LILEE) indicator and previously the Low Income High Costs (LIHC) indicator have been used by the UK government to monitor national energy poverty levels. Yet due to their reliance on complex, time-intensive data collection processes and estimations, these indicators are not suitable for identifying energy poverty in specific households. This study investigates an alternative approach to energy poverty identification: using machine learning models trained on administrative data, data that could reasonably be available to governments for all or most households. We develop machine learning models using data from the English Housing Survey that serves as a proxy for administrative data. This data is selected to closely resemble what might be available in national administrative databases, incorporating variables such as household socio-demographics and building physical characteristics. We evaluate multiple classification algorithms, including Random Forest and XGBoosting, applying resampling and class weighting techniques to address the inherent class imbalance in energy poverty classification. We compare model performance with a ‘benchmark’ model developed by the UK government for the same goal. Model performance is assessed using the metrics of accuracy, balanced accuracy, precision, recall, and F1-score, with SHapley Additive exPlanations (SHAP) values providing the interpretability of the predictions. The best-performing model (XGBoosting with class weighting) achieves higher balanced accuracy (0.88), and precision (0.51) compared to the benchmark model (balanced accuracy: 0.77, precision: 0.24), demonstrating an improved ability to classify energy-poor households with fewer data constraints. SHAP analysis reveals household income and dwelling characteristics are key determinants of energy poverty. This research demonstrates that machine learning, trained on existing administrative datasets, offers a feasible, scalable, and interpretable alternative for energy poverty identification, enabling new opportunities for efficient targeted policy interventions. This study also aligns with recent UK government discussions on the potential for integrating administrative data sources to enhance policy implementation. Future research could explore the integration of real-time smart meter data to refine energy poverty assessments further. Full article

This study is one of the first empirical attempts to quantify the social benefit of virtual power plants (VPPs) in South Korea using the contingent valuation method (CVM). As Korea pursues its ambitious carbon neutrality goal by 2050, VPPs have emerged as a critical technology for managing the intermittency of renewable energy sources and ensuring grid stability. Despite their recognized technical potential, the social and economic value of VPPs remains largely unexplored. Through a nationwide survey of 1105 households, we employed a double-bounded dichotomous choice spike model to estimate willingness to pay (WTP) for government-led VPP implementation. The analysis revealed two distinct dimensions influencing VPP valuation: electricity bill perceptions and electricity generation mix preferences. Results indicated that Korean households exhibited significant but heterogeneous WTP for VPP implementation, with unconditional mean annual WTP ranging from KRW 23,474 to KRW 26,545 per household. Notably, support for renewable energy transition showed stronger positive effects on WTP compared to nuclear expansion preferences, suggesting VPPs are primarily valued as renewable energy enablers. The substantial spike probability (32–34%) indicated that approximately one-third of the population has zero WTP, highlighting challenges in introducing novel energy technologies. Key determinants of positive WTP included perceived fairness of electricity pricing, support for market-based mechanisms, and preferences for transitioning from coal and nuclear to renewables. These findings provide critical policy insights for VPP deployment strategies, suggesting the need for phased implementation, targeted communication emphasizing renewable integration benefits, and coordination with broader electricity market reforms. The study contributes to energy transition economics literature by demonstrating how public preferences for emerging grid technologies are shaped by both economic considerations and environmental values. Full article

The voluntary basis on which recycling and energy saving are performed at households brings forward the need to better understand the profile of recyclers and non-recyclers and to make meaningful comparisons between them. Hence, the aim of this study is to compare recyclers’ and non-recyclers’ profiles and practices in order to detect areas that require policy and educational interventions. To achieve this aim, this study collected a representative sample of 384 citizens in a fast-growing urban center and compared recyclers and non-recyclers in terms of their environmental practices. The results showed that both groups identified environmental protection as their leading motive to recycle, while plastic and paper were the most recycled materials. An interesting difference between the two groups was that recyclers were more engaged in energy-saving, suggesting that recycling engagement may be associated with the adoption of energy-saving practices. The Internet was the leading information source across both groups, emphasizing the role it can play in spreading accurate and motivating messages about recycling and energy-saving. This study provides a useful and nuanced picture of recyclers’ and non-recyclers’ profiles and their differences, and as such, it can introduce new angles for the design of strategies for encouraging pro-environmental behavior. Full article

In this research, we present the development and validation of a compact, resource-efficient (low-cost, low-energy), distributed, real-time traffic and air quality monitoring system. Deployed since November 2023 in a small town that relies on burning various fuels and waste for winter heating, the system comprises three IoT units that integrate image processing and environmental sensing for sustainable urban and environmental management. Each unit uses an embedded camera and sensors to process live data locally, which are then transmitted to a central database. The image processing algorithm counts vehicles by type with over 95% daylight accuracy, while air quality sensors measure pollutants including particulate matter (PM), equivalent carbon dioxide (eCO₂), and total volatile organic compounds (TVOCs). Data analysis revealed fluctuations in pollutant concentrations across monitored areas, correlating with traffic variations and enabling the identification of pollution sources and their relative impacts. Recorded PM10 daily average levels even reached eight times above the safe 24 h limits in winter, when traffic values were low, indicating a strong link to household heating. This work provides a scalable, cost-effective approach to traffic and air quality monitoring, offering actionable insights for urban planning and sustainable development. Full article