Search Results (5)

Heavy goods transportation is responsible for around 27% of CO₂ emissions from road transport in the EU and for 5% of total CO₂ emissions in the EU. The decarbonization of long-distance transport in particular remains a major challenge. The combination of battery electric trucks (BETs) with on-route high-power charging (HPC) offers a promising solution. Planning and setting up the required infrastructure is a critical success factor here. We propose a methodology to evaluate the charging infrastructure needed to support the large-scale introduction of heavy-duty BETs in Germany, considering different levels of electrification, taking the European driving and rest time regulations into account. Our analysis employs MATSim, an activity-based multi-agent transport simulation, to assess potential bottlenecks in the charging infrastructure and to simulate the demand-based distribution of charging stations. The MATSim simulation is combined with an extensive pre-processing of transport-related data and a suitable post-processing. This approach allows for a detailed examination of the required charging infrastructure, considering the impacts of depot charging solutions and the dynamic nature of truck movements and charging needs. The results indicate a significant need to augment HPC with substantial low power overnight charging facilities and highlight the importance of strategic infrastructure development to accommodate the growing demand for chargers for BETs. By simulating various scenarios of electrification, we demonstrate the critical role of demand-oriented infrastructure planning in reducing emissions from the road freight sector until 2030. This study contributes to the ongoing discourse on sustainable transportation, offering insights into the infrastructure requirements and planning challenges associated with the transition to battery electric heavy-duty vehicles. Full article

The aging behavior of lithium-ion batteries is crucial for the development of electric vehicles and many other battery-powered devices. The cells can be generally classified into two types: high-energy (HE) and high-power (HP) cells. The cell type used depends on the field of application. As these cells differ in their electrical behavior, this work investigates whether both cell types also show different aging behavior. More precisely, the occurring capacity loss and internal side reactions are analyzed via the charge throughput. For comparison, aging tests are carried out with a high-precision battery tester, allowing the application of High Precision Coulometry (HPC). This enables early detection of aging effects and also allows us to break down the capacity loss into electrode-individual processes. A total of two sub-studies are performed: (1) a cyclic study focusing on lithium plating; and (2) an accelerated calendar aging study. It is found that HE cells exhibit stronger cyclic aging effects (lithium plating) and HP cells exhibit stronger calendar aging effects. The higher lithium plating can be explained by the higher diffusion resistance of the lithium ions within the electrodes of HE Cell. The higher calendar aging fits to the larger electrode surfaces of the HP cell. These results give deep insights into the proceeding aging in a novel way and are interesting for the selection of the appropriate cell type in the context of battery development. In a next step, the measured capacity losses could also be used for a simple parameterization of battery aging models. Full article

Electrification of mobility is paving the way in decreasing emissions from the transport sector; nevertheless, to achieve a more sustainable and inclusive transport system, effective and long-term planning of electric vehicles charging infrastructure will be crucial. Developing an infrastructure that supports the substitution of the internal combustion engine and societal needs is no easy feat; different modes of transport and networks require specific analyses to match the requirements of the users and the capabilities of the power grid. In order to outline best practices and guidelines for a cost-effective and holistic charging infrastructure planning process, the authors have evaluated all the aspects and factors along the charging infrastructure planning cycle, analysing different methodological approaches from scientific literature over the last few years. The review starts with target identification (including transport networks, modes of transport, charging technologies implemented, and candidate sites), second, the data acquisition process (detailing data types sources and data processing), and finally, modelling, allocation, and sizing methodologies. The investigation results in a decision support tool to plan high-power charging infrastructure for electric vehicles, taking into account the interests of all the stakeholders involved in the infrastructure investment and the mobility value chain (distributed system operators, final users, and service providers). Full article

In the aim to go beyond the performance tradeoffs of classic electric double-layer capacitance and pseudo-capacitance, composites made out of carbon and pseudo-capacitive materials have been a hot-spot strategy. In this paper, a nest-like MnO₂ nanowire/hierarchical porous carbon (HPC) composite (MPC) was successfully fabricated by a controllable in situ chemical co-precipitation method from oily sludge waste. Due to the advantages of high surface area and fast charge transfer for HPC as well as the large pseudo-capacitance for MnO₂ nanowires, the as-prepared MPC has good capacitance performance with a specific capacitance of 437.9 F g⁻¹ at 0.5 A g⁻¹, favorable rate capability of 79.2% retention at 20 A g⁻¹, and long-term cycle stability of 78.5% retention after 5000 cycles at 5 A g⁻¹. Meanwhile, an asymmetric supercapacitor (ASC) was assembled using MPC as the cathode while HPC was the anode, which exhibits a superior energy density of 58.67 W h kg⁻¹ at the corresponding power density of 498.8 W kg⁻¹. These extraordinary electrochemical properties highlight the prospect of our waste-derived composites electrode material to replace conventional electrode materials for a high-performance supercapacitor. Full article

In its “Sustainable and Smart Mobility Strategy”, the European Commission assumes a 90% reduction in traffic emissions by 2050. The decarbonisation of transport logistics as a major contributor to climate change is, therefore, indicated. There are major challenges in converting logistic transport processes to electric mobility. Currently, there is little available information for the conversion of entire fleets from fossil to electric fuel. One of the biggest challenges is the additional time needed for recharging. For the scheduling of entire logistics fleets, exact knowledge of the required loading times and loading quantities is essential. In this work, a parametrized continuous function is, therefore, defined to determine the essential parameters (recharging time, retrieved power, energy amounts) in HPC (high-power charging). These findings are particularly important for the deployment of multiple e-trucks in fleets, as logistics management depends on them. A simple function was constructed that can describe all phases of the charging process in a continuous function. Only the maximum power of the charging station, the size of the battery in the truck and the start SOC (state of charge) are required as parameters while using the function. The method described in this paper can make a significant contribution to the transformation towards electro-mobile urban logistics fleets. The required charging time, for example, is crucial for the planning and scheduling of e-logistics fleets and can be determined using the function described in this paper. Full article