Search Results (363)

Catalytic and bioelectrocatalytic properties of four white rot fungal laccases (Trametes hirsuta, ThL; Coriolopsis caperata, CcL; Steccherinum murashkinskyi, SmL; and Antrodiella faginea, AfL) from different orthologous groups were comparatively studied in homogeneous reactions of electron donor substrate oxidation and in a heterogeneous reaction of dioxygen electroreduction. The ThL and CcL laccases belong to high-redox-potential enzymes (E⁰_T1 = 780 mV), while the AfL and SmL laccases are medium-redox-potential enzymes (E⁰_T1 = 620 and 650 mV). We evaluated the efficiency of laccases in mediatorless bioelectrocatalytic dioxygen reduction by the steady-state potential (E_ss), onset potential (E_onset), half-wave potential (E_1/2), and the slope of the linear segment of the polarization curve. A good correlation was observed between the T1 center potential of the laccases and their electrocatalytic characteristics; however, no correlation with the homogeneous reactions of electron donor substrates’ oxidation was detected. The results obtained are discussed in the light of the known data on the three-dimensional structures of the laccases studied. Full article

Nowadays, nanosized mesoporous oxides are of increasing interest to scientists. They can be used as components of heterogeneous catalysts, for photo- and electrocatalysis, as gas sensors, etc. For instance, the desired properties in catalysts include a nano size and homogeneity of the particles that form the catalyst. The particle sizes of oxides are set at the initial stage of their formation, as precursors of precipitation in the context of wet chemistry. The creation of optimal conditions is possible through the use of homogeneous precipitation, where the precipitant is formed within the solution itself as a result of a hydrolysis reaction. The resolution of this issue involved the utilization of urea in our experimental setup, obtaining the hydrolysis products of ammonia and carbon dioxide. Consequently, precipitation reactions can be utilized to obtain hydroxides, carbonates, or hydroxy carbonates of metals. The precursors were calcined, obtaining nanosized mesoporous oxides, which can have a wide range of applications. Nanosized 0.1–50 nm metal oxides were obtained, including those aluminum, iron, indium, zinc, nickel, and cobalt. Full article

Esterification is a key transformation in the production of lubricants, pharmaceuticals, and fine chemicals. Conventional processes employing homogeneous acid catalysts suffer from limitations such as corrosive byproducts, energy-intensive separation, and poor catalyst reusability. This review provides a comprehensive overview of heterogeneous catalytic systems, including ion exchange resins, zeolites, metal oxides, mesoporous materials, and others, for improved ester synthesis. Recent advances in membrane-integrated reactors, such as pervaporation and nanofiltration, which enable continuous water removal, shifting equilibrium and increasing conversion under milder conditions, are reviewed. Dual-functional membranes that combine catalytic activity with selective separation further enhance process efficiency and reduce energy consumption. Enzymatic systems using immobilized lipases present additional opportunities for mild and selective reactions. Future directions emphasize the integration of pervaporation membranes, hybrid catalyst systems combining biocatalysts and metals, and real-time optimization through artificial intelligence. Modular plug-and-play reactor designs are identified as a promising approach to flexible, scalable, and sustainable esterification. Overall, the interaction of catalyst development, membrane technology, and digital process control offers a transformative platform for next-generation ester synthesis aligned with green chemistry and industrial scalability. Full article

This work aims to clarify whether the individual advantages of the two commonly used silicate- and aluminate-based electrolytes for the plasma electrolytic oxidation (PEO) of steel can be combined in a two-step process. The first PEO step was carried out in an aluminate–phosphate electrolyte with pulsed voltage and anodic amplitudes between 150 V and 200 V. The second PEO step was carried out at an increased anodic voltage amplitude of 400 V in a silicate–phosphate electrolyte. As a reference, PEO was conducted in a single step in the same silicate–phosphate electrolyte at an increased anodic voltage amplitude of up to 400 V. The microstructural layer analysis was carried out using SEM and EDX analyses, Raman spectroscopy and XRD analysis. Heterogeneous layers containing iron oxide and iron phosphate form in the silicate–phosphate electrolyte at anodic voltage amplitudes up to 300 V by electrochemical reactions. Further increasing the anodic voltage amplitude up to 400 V results in heterogeneous layers, too. PEO in the aluminate–phosphate electrolyte at 150 V causes the formation of thin, amorphous layers mainly consisting of aluminum and iron oxides. At 200 V amplitude, a PEO layer with pronounced open porosity is formed, which primarily consists of the crystalline phases corundum and hercynite. During subsequent PEO in the silicate–phosphate electrolyte, the previously formed layers were replaced by a macroscopically homogeneous layer that is mostly nanocrystalline and may contain amorphous iron(-aluminum) phosphates and oxides as well as silicon oxide. It can be concluded that the two-step PEO process is suitable for the production of more homogeneous PEO layers. Full article

In this study, the degradation of Nile Blue dye was investigated using homogeneous and heterogeneous photocatalytic methods based on the photo-Fenton reaction. More specifically, for homogeneous photocatalysis, the classical photo-Fenton (UV/Fe²⁺/H₂O₂) and modified photo-Fenton-like (UV/Fe²⁺/S₂O₈²⁻) systems were studied, while for heterogeneous photocatalysis, a commercial MOF catalyst, Basolite F300, and a natural ferrous mineral, geothite, were employed. Various parameters—including the concentrations of the oxidant and catalyst, UV radiation, and pH—were investigated to determine their influence on the reaction rate. In homogeneous systems, an increase in iron concentration led to an enhanced degradation rate of the target compound. Similarly, increasing the oxidant concentration accelerated the reaction rate up to an optimal level, beyond which radical scavenging effects were observed, reducing the overall efficiency. In contrast, heterogeneous systems exhibited negligible degradation in the absence of an oxidant; however, the addition of oxidants significantly improved the process efficiency. Among the tested processes, homogeneous techniques demonstrated a superior efficiency, with the conventional photo-Fenton process achieving complete mineralization within three hours. Kinetic analysis revealed pseudo-first-order behavior, with rate constants ranging from 0.012 to 0.688 min⁻¹ and correlation coefficients (R²) consistently above 0.90, confirming the reliability of the applied model under various experimental conditions. Nevertheless, heterogeneous techniques, despite their lower degradation rates, also achieved high removal efficiencies while offering the advantage of operating at a neutral pH without the need for acidification. Full article

The aim of this work was the preparation of ceramic monolithic catalysts for the catalytic oxidation of gaseous mixture of benzene, toluene, ethylbenzene and o-xylene BTEX. The possibility of using zirconium dioxide (ZrO₂) as a filament for the fabrication of 3D-printed ceramic monolithic carriers was investigated using fused filament fabrication. A mixed manganese and iron oxide, MnFeO_x, was used as the catalytically active layer, which was applied to the monolithic substrate by wet impregnation. The approximate geometric surface area of the obtained carrier was determined to be 53.4 cm², while the mass of the applied catalytically active layer was 50.3 mg. The activity of the prepared monolithic catalysts for the oxidation of BTEX was tested at different temperatures and space times. The results obtained were compared with those obtained with commercial monolithic catalysts made of ceramic cordierite with different channel dimensions, and with monolithic catalysts prepared by stereolithography. In the last part of the work, a kinetic analysis and the modeling of the monolithic reactor were carried out, comparing the experimental results with the theoretical results obtained with the 1D pseudo-homogeneous and 1D heterogeneous models. Although both models could describe the investigated experimental system very well, the 1D heterogeneous model is preferable, as it takes into account the heterogeneity of the reaction system and therefore provides a more realistic description. Full article

Cocktail-type catalysis represents a significant shift in the understanding of catalytic processes, recognizing that multiple interconverting species—such as metal complexes, clusters, and nanoparticles—can coexist and cooperate within a single reaction environment. Originating from mechanistic studies on palladium-catalyzed systems, this concept challenges the classical division between homogeneous and heterogeneous catalysis. Instead, it introduces a dynamic framework where catalysts adapt and evolve under reaction conditions, often enhancing efficiency, selectivity, and durability. Using advanced spectroscopic, microscopic, and computational techniques, researchers have visualized the formation and transformation of catalytic species in real time. The cocktail-type approach has since been extended to platinum, nickel, copper, and other transition metals, revealing a general principle in catalysis. This approach not only resolves long-standing mechanistic inconsistencies, but also opens new directions for catalyst design, green chemistry, and sustainable industrial applications. Embracing the complexity of catalytic systems may redefine future strategies in both fundamental research and applied catalysis. Full article

Hydroformylation is one of the most widely applied homogeneous catalytic processes in the chemical industry, constituting the predominant manufacturing platform for aldehyde synthesis at commercial scales. Nevertheless, hydroformylation shares with traditional homogeneous catalysis the inherent limitation of difficult catalyst recovery and recycling. Developing heterogeneous catalysts for such reactions is thus critically needed. Herein, a stable nitrogen-rich covalent triazine framework (CTF) was synthesized via a mild Friedel–Crafts alkylation method and employed as a support for Rh single-atom catalysts (Rh/CTF-TPA). In the hydroformylation of 1-decene, the Rh/CTF-TPA catalyst exhibits an exceptional reaction efficiency (TOF > 1900 h⁻¹), outperforming the homogeneous Rh(CO)₂(acac). Experimental and characterization results revealed that the CTF support enhances catalytic performance through two key mechanisms: (1) strong enrichment of reactants within its special structure, and (2) efficient dispersion of Rh single-atom sites stabilized by abundant nitrogen coordination. This work demonstrates a rational design strategy for heterogeneous hydroformylation catalysts by leveraging nitrogen-rich porous frameworks to synergistically optimize metal anchoring and reactant enrichment, offering a promising alternative to conventional homogeneous systems. Full article

Copper complexes have attracted significant interest for catalyzing oxidative dehydrogenative carboxylation of alkanes to form esters. Here, we report a heterogeneous catalyst, in which copper complexes are immobilized on coal-bearing kaolin for the synthesis of allylic esters via C(sp³)-H bond activation through cross-dehydrogenation coupling reactions between cyclic alkanes and aromatic carboxylic acids. Systematic optimization of reaction conditions—including catalyst loading, copper content, oxidant, temperature, and reaction time—resulted in a high yield of 71% of allylic ester, comparable to homogeneous transition metal catalysts. The catalyst is easily recoverable via centrifugation and retains its activity over five consecutive reuse cycles. This system demonstrates broad substrate compatibility with various aromatic carboxylic acids and cyclic alkanes. Beyond offering an efficient and reusable catalytic route for allylic ester synthesis, this work highlights the potential of coal-bearing kaolin as a sustainable support material for transition metal catalysis and provides an environmentally benign method for activating inert C(sp³)–H bonds. Full article

Cobalt–zeolite composite catalysts (Co–zeolite) and their heterogeneous catalytic systems have garnered significant research attention owing to their superior catalytic activity and cost-effectiveness. The speciation of cobalt within these catalysts—either through impregnation onto the zeolite framework or structural incorporation within the aluminosilicate matrix—is critically governed by the employed synthesis methodology, which subsequently dictates their distinct catalytic advantages in targeted reaction systems. Compared to homogeneous catalytic systems, heterogeneous Co–zeolite configurations demonstrate enhanced structural integrity that effectively mitigates cobalt leaching, thereby improving catalyst recyclability while minimizing environmental contamination. This review systematically examines recent advancements in Co–zeolite fabrication techniques and their catalytic performance across diverse applications, including Fischer–Tropsch synthesis, nitrogen oxide abatement, hydrogenation processes, and oxidative transformations. Particular emphasis is placed on elucidating the metal-framework interactions, with analysis of synergistic effects arising from multi-valent cobalt speciation and bimetallic cooperativity between cobalt and secondary transition metals. This work critically evaluates current challenges in Co–zeolite catalyst design. Finally, we propose future research directions focusing on a precise identification of active species and mechanistic elucidation, innovative synthesis strategies for cobalt speciation control, machine learning-guided catalyst optimization, and the advancement of eco-friendly catalysts. Full article

As fossil fuel depletion and environmental pollution become increasingly severe, biodiesel has emerged as a promising renewable alternative to conventional diesel due to its biodegradability, low sulfur emissions, and high combustion efficiency. This paper provides a comprehensive review of the evolution of biodiesel feedstocks, major production technologies, and key factors influencing production efficiency and fuel quality. It traces the development of feedstocks from first-generation edible oils, second-generation non-edible oils and waste fats, to third-generation microalgal oils and fourth-generation biofuels based on synthetic biology, with a comparative analysis of their respective advantages and limitations. Various production technologies such as transesterification, direct esterification, supercritical alcohol methods, and enzyme-catalyzed transesterification are examined in terms of reaction mechanisms, process conditions, and applicability. The effects of critical process parameters including the alcohol-to-oil molar ratio, reaction time, and temperature on biodiesel yield and quality are discussed in detail. Particular attention is given to the role of catalysts, including both homogeneous and heterogeneous types, in enhancing conversion efficiency. In addition, life cycle assessment (LCA) is briefly considered to evaluate the environmental impact and sustainability of biodiesel production. This review serves as a valuable reference for improving biodiesel production technologies, advancing sustainable feedstock development, and promoting the commercial application of biodiesel. Full article

This study focuses on understanding the bioconvection in Jeffery–Hamel (JH) flow, which has valuable applications in areas like converging dies, hydrology, and the automotive industry, which make it a topic of practical importance. This research aims to explore Homogeneous–Heterogeneous (HH) chemical reactions in a magnetic Darcy–Forchheimer model with bioconvection in convergent/divergent channels. To analyze the role of porosity, the Darcy–Forchheimer law is applied. The main system of equations is simplified through similarity transformation into ordinary differential equations solved numerically with the help of the NDSolve technique. The results, compared with previous studies for validation, are presented through graphs and tables. The study reveals that in divergent channels, the velocity decreases with higher solid volume fractions, while in convergent channels, it increases. Furthermore, various physical parameters, such as the Eckert number and porosity parameter, increase skin friction in divergent channels but decrease it in convergent channels. These findings suggest that the parameters investigated in this study can effectively enhance homogeneous reactions, providing valuable insights for practical applications. Full article

Understanding the reaction pathway of aldehyde deformylation catalyzed by natural enzymes has shown significance in developing synthetic methodologies and new catalysts in organic, biochemical, and medicinal chemistry. However, unlike other well-rationalized chemical processes catalyzed by cytochrome P450 (Cyt P450) superfamilies, the detailed mechanism of the P450-catalyzed aldehyde deformylation is still controversial. Challenges lie in establishing synthetic models to decipher the reaction pathways, which normally are homogeneous systems for precisely mimicking the structure of the active sites in P450s. Herein, we report a heterogeneous Cyt P450 aromatase mimic based on a porphyrinic metal–organic framework (MOF) PCN-224. Through post-metalation of iron(II) triflate with the porphyrin unit, a five-coordinated Fe^II(Porp) compound could be afforded and isolated inside the resulting PCN-224(Fe) to mimic the heme active site in P450. This MOF-based P450 mimic could efficiently catalyze the oxidative deformylation of aldehydes to the corresponding ketones under room temperature using O₂ as the sole oxidant and triethylamine as the electron source, analogous to the NADPH reductase. The catalyst could be completely recovered after the catalytic reaction without undergoing structural decomposition or compromising its reactivity, representing it as one of the most valid mimics of P450 aromatase from both the structural and functional aspects. A mechanistic study reveals a strong correlation between the catalytic activity and the C^α-H bond dissociation energy of the aldehyde substrates, which, in conjunction with various trapping experiments, confirms an unconventional mechanism initiated by hydrogen atom abstraction. Full article

The utilisation of fossil fuels has resulted in the continuous increase in anthropogenic carbon dioxide (CO₂) emissions and has led to significant environmental impacts. To this end, the catalytic hydrogenation of captured CO₂ into value-added C1 chemicals has attracted great attention. In this case, significant research efforts have been directed towards the development of heterogeneous catalysts. Owing to the unique properties and functionalities of hydridic hydrogen (H⁻), metal hydrides have shown great promise in hydrogen-involved catalytic processes. This is attributed to their enhanced hydrogen (H₂) absorption-desorption reversibility and newly developed active sites. Nevertheless, their application in the activation and hydrogenation of CO₂ has been overlooked. In this review paper, we provide an overview of recent advances in catalytic CO₂ hydrogenation using metal hydride-based materials. Firstly, the reaction mechanisms of CO₂ hydrogenation toward different C1 products (CO, CH₄, CH₃OH and HCOOH) are introduced to better understand their application trend. Thereafter, we highlight the challenges of developing robust hydride catalysts with different components and structures that enable tuning of their catalytic activity and selectivity. A brief introduction of the CO₂ hydrogenation over typical homogeneous metal hydrides complexes is also presented. Lastly, conclusion, future outlook and perspectives are discussed. Full article

Aqueous biphasic catalysis has gained recognition as a sustainable and efficient method that combines the advantages of both homogeneous and heterogeneous catalytic systems. This approach enables the separation and recycling of catalysts, leading to reduced environmental impact and lower operational costs. A key component of this method is the use of transition metal catalysts, which are crucial for facilitating various reactions when paired with different types of ligands, primarily hydrophiles. This combination is essential for achieving high success rates in recyclable catalytic systems. The reaction conditions, including temperature, pressure, and pH, significantly influence catalytic performance. However, challenges such as limited substrate solubility and catalyst leaching persist, underscoring the need for further research into advanced ligand design, catalyst immobilization techniques, and scalable process integration. This review systematically examines recent experiments in the aqueous biphasic catalysis of olefins, following the Preferred Reporting Items for Systematic Reviews and Meta-Analyses framework. From an initial pool of 597 articles, 104 were found to be relevant and focused specifically on aqueous biphasic catalysis. The study investigates key reactions, the factors that influence these biphasic reactions, and the catalytic systems that facilitate them. By highlighting both progress and ongoing challenges, this work underscores the potential of aqueous biphasic catalysis to bridge the gap between green chemistry principles and industrial applications. Full article