Search Results (70)

The study aimed to determine the content of biocompounds and the nutrient composition of dried kale (with/without blanching) and bars containing it (fresh/dried). Kale leaves and bars were dried using convection (CD), convection–infrared–ultrasonic (HD), and freeze-drying (FD) methods to obtain potential snacks. The bar recipe consisted of 20% fresh kale (plus 30% water) or 10% dried kale (plus 40% water), 20% dried dates, 10% coconut flour, 10% flaxseed, and 10% hemp protein. Dried blanched kale contained from 524 to 618 mg of GAE/100 g d.m., which was 6.8–12.4% more than in unblanched kale, but about four times less in the bars. Similarly, blanched kale had a higher content of chlorophyll A + B and carotenoids. Both of these groups of compounds in blanched kale dried using the HD method were comparable to or slightly higher than in the raw material (approx. 932 and 174 mg/100 g d.m. of chlorophyll A + B and carotenoids, respectively), while in the bars their content was low, 34–64 and 7.6–13.2 mg/100 g d.m., respectively. The caloric content of the bars ranged from 325 to 348 kcal/100 g (1356 to 1452 kJ/100 g of product). Dried kale has proven to be a valuable snack due to its antioxidant content. In turn, the bars were rich in nutrients such as protein (approx. 14.4%), fat (approx. 9.3%), minerals (approx. 4.0%), carbohydrates (approx. 35.2%), and especially fiber (approx. 27.3%), which allows them to be classified as “high-fiber” products. Full article

The development of functional yogurt products enriched with plant-derived ingredients and biologically active compounds represents a promising strategy to improve the nutritional, probiotic, and antioxidant properties of fermented dairy foods. The aim of this study was to evaluate how plant-derived ingredients (whole-meal flour from sprouted wheat grain and a protein-rich functional ingredient derived from hemp press cake), used individually or in combination with curcumin- or ergosterol-enriched Saccharomyces cerevisiae biomass, influence the physicochemical, structural-mechanical, probiotic, antioxidant, and sensory characteristics of yogurt products. Two forms of yeast biomass were used as enrichment agents: one containing encapsulated curcumin and the other with a high ergosterol content. Milk mixtures were supplemented with yeast biomass containing 34.0 mg/g encapsulated curcumin or 10.55 mg/g ergosterol. Additionally, whole-meal flour from sprouted wheat grain or the hemp-derived protein ingredient was incorporated into the yogurt products at concentrations of 2–3%. These ingredients were tested both individually and in combination to identify optimal formulations that would confer novel properties to the final products. Based on the conducted studies, it was found that the addition of enriched yeast biomass and the protein ingredient resulted in a denser and more uniform structure in the yogurt products compared to those of the control. The titratable acidity of the experimental formulations ranged from 80.2 to 91.8 °T, while pH values ranged from 3.79 to 4.04. Compared with the control sample, these changes indicate enhanced lactic acid fermentation activity. The number of probiotic microorganisms in the experimental samples reached 1.6 × 10⁷–6.4 × 10⁷ MPN/g, exceeding those of the control by an order of magnitude. The type of plant ingredient used significantly determined the technological properties of the finished product. Compared with the control sample, yogurt products supplemented with the hemp press cake-derived protein ingredient exhibited higher protein content (33–34% on a dry matter basis), increased viscosity (2.5–2.6 Pa·s), and reduced syneresis (values of 16.1 mL). The whole-meal flour from sprouted wheat grain exhibited a more pronounced stimulating effect on the growth of probiotic microflora. Enrichment of yogurt products with yeast biomass also increased antioxidant activity: the AOA (DPPH) value increased to 69–84% compared to ~62% in the control. Biotesting using Paramecium caudatum, a sensitive protozoan model widely used for rapid assessment of biological compatibility, toxicity, and the relative biological value of food systems, demonstrated a statistically significant increase (p < 0.05) in protozoan growth to 104–106% compared with the control sample, suggesting the absence of toxic effects and the potential bioavailability of yogurt matrix components. This data confirm the potential of using enriched yeast biomass in combination with plant ingredients for creating probiotic yogurt products with improved structural and functional properties. Full article

This study presents an integrated metabolite-centered framework for the comparative evaluation of plant-based substrates through the simultaneous profiling of fermentation-associated short-chain fatty acids (SCFAs) and neuroactive compounds within a single in vitro experimental platform. Unlike conventional studies focusing on individual metabolite classes, the present approach combines in vitro gastrointestinal digestion with simplified bacterial fermentation to characterize substrate-dependent metabolic responses under controlled experimental conditions. Concurrent evaluation of SCFA production and neuroactive compound formation enabled multidimensional assessment of fermentation-associated metabolite profiles and their potential biochemical interrelationships. Significant differences (p < 0.05) were observed among substrates in both SCFA production and neuroactive compound formation. Hemp seed flour exhibited the highest acetate concentration (4.67 mg/100 g) and γ-aminobutyric acid (GABA) level (114.00 µg/g), whereas lentil and corn flour showed elevated propionate levels. Chickpea and bulgur produced the highest butyrate concentrations. Among neuroactive compounds, bulgur exhibited the highest dopamine and serotonin levels, while lentil demonstrated a more balanced metabolite profile. Correlation analysis suggested exploratory associations between SCFA production and neuroactive compound formation. A strong positive correlation between acetate and GABA (r = 0.89) indicated potential co-variation between carbohydrate fermentation and neuroactive metabolite formation, whereas divergent dopamine and serotonin patterns suggested substrate-dependent metabolic differences. Functional mapping further classified substrates into SCFA-oriented, neuroactive compound–dominant, and mixed metabolic profile groups. Collectively, these findings support a metabolite-centered framework for comparative assessment of plant-based substrates based on fermentation-associated metabolite profiles obtained under controlled in vitro conditions. Although the simplified two-strain fermentation model does not reproduce the complexity of the human colonic microbiota, the observed substrate-dependent metabolic differences may provide preliminary insights into biochemical outputs potentially relevant to gut–brain axis-associated pathways. Further studies employing complex microbial communities and in vivo validation are required to confirm the physiological relevance of these findings. Full article

Hemp seeds and derived products were recently re-evaluated in the food sector, thanks to their high nutritional value and absence of gluten. This increasing diffusion required to investigate the occurrence of mycotoxins, in particular of Alternaria toxins (ALTs), has been uncovered at high levels in previous work. An integrated approach was involved in this study. First, Alternaria spp. incidence and ALTs were determined in hemp seeds harvested in different fields during 2024 and 2025 and the influence of meteorological conditions and of varieties was evaluated. Then, their distribution in hemp oil and defatted flour was studied after a cold pressing process of naturally contaminated hemp seeds, finding a high percentage, over 85%, in hemp cake. Finally, a small survey was conducted on different hemp products intended for direct human consumption, confirming the risk of contamination in seeds, flour and derived bakery products. Full article

Formaldehyde emissions from urea–formaldehyde (UF)-bonded particleboards remain a significant environmental and health concern. This study evaluates the effectiveness of flours as bio-based formaldehyde scavengers in particleboard production. Food-based flours (soy, wheat, green pea) and feed flours (hemp, maize DDGS, feather meal) were incorporated into UF resin at concentrations of 0.3–2.0%. Resin characterization included pH, viscosity, gelation time, solid content, and free formaldehyde, while rheological behavior was monitored at 70 °C and 90 °C. The addition of flour decreased pH from 9.1 to 7.9 and increased viscosity from 414 to up to 1600 cP, depending on flour type and dosage. Free-formaldehyde content was reduced from 0.17% to as low as 0.08%, with the most effective reduction observed for hemp flour. At industrial scale, particleboards produced with 0.5% soy and hemp flours significantly reduced free formaldehyde, with emission values of 3.26 mg/m² and 3.05 mg/m², corresponding to reductions of 66–70% compared to the reference (3.97 mg/m²). Mechanical properties, including density (652–665 kg·m⁻³), bending strength (13.2–14.1 N·mm⁻²), and internal bond (0.42–0.45 N·mm⁻²), were maintained within acceptable limits. While feed flours such as feather meal showed strong scavenging potential, they caused significant viscosity increases (up to 1800 cP), limiting processability. These findings demonstrate that adding low levels of flour, particularly soy or hemp, is an effective, renewable, and low-cost strategy to reduce formaldehyde emissions in UF-bonded particleboards, supporting the production of safer and more sustainable wood-based composites. Full article

This study aimed to assess whether hemp or buckwheat flour, and the replacement of water with cistus infusion, can simultaneously improve the nutritional value and antioxidant potential of wheat–chia bread while maintaining acceptable sensory quality. Control bread (WCh) and variants with hemp flour (WChH) or buckwheat flour (WChB), prepared with either water or cistus infusion (Cis), were baked. The chemical composition, amino acid profile and protein quality (AAS), fatty acid profile, phenolic compounds and antioxidant properties (TPC, FRAP), color (CIELAB), and texture were determined. E-tongue and e-nose analyses, as well as consumer evaluation, were also performed. Hemp flour most significantly increased the protein and dietary fiber content of bread and improved the PUFA content and PUFA/SFA ratio. Buckwheat flour shifted the lipid profile toward MUFA and yielded the highest lysine AAS, although lysine remained the limiting amino acid in all variants. Cistus infusion increased the polyphenol pool and antioxidant activity, with the strongest effect observed in the combined WChH/Cis and WChB/Cis systems. Electronic nose and an electronic tongue analyses confirmed significant differentiation of the flavor and aroma profiles among variants. Consumer evaluation showed a decrease in acceptance following hemp flour addition, which was partially mitigated by cistus infusion, while buckwheat variants maintained good sensory acceptance. Full article

The article presents the results of a study of constructed composites based on degradable poly(3-hydroxybutyrate) (P(3HB)) filled with plant materials of 30, 50, and 70% of different origin—wood flour (WF) from birch (Betula pendula), hemp hurds (HH) or hemp fiber (HF) (Cannabis sativa). Composite bar samples were obtained by hot pressing homogeneous mixtures of polymer and fillers at 170 °C and a specific pressure of 6.13 MPa. The influence of the filler type and the polymer/filler ratio on the temperature characteristics of the samples, density, microstructure, surface properties, water absorption, physical and mechanical properties, and degradability in soil was determined. The Young’s modulus of the samples ranged from 2640 to 3715 MPa, depending on the composition. The maximum degradation of the composites after 120 days of exposure to soil was recorded at 70% WF, HH, or HF filling, amounting to 77.4, 63.5, and 38.6%, respectively. Perspective biodegradable composites based on P(3HB) filled with various plant-based fillers were obtained and characterized, along with new knowledge about their properties, the lack of which currently hinders the active development and commercialization of such in-demand materials. Full article

This research investigates the incorporation of hemp seed cake (HSC), a nutrient-rich by-product of hemp oil extraction, into traditional pretzel formulations as a sustainable approach to functional dry pretzels development. Wheat flour was substituted with 5–40% HSC, and the resulting products were examined for proximate composition, bioactive profile, and sensory perception. Substitution with hemp seed cake significantly enhanced nutritional quality, raising protein from 7.49 to 12.62% and fiber from 0.90 to 11.78%, while lowering carbohydrates; notably, formulations containing ≥30% HSC meet EU Regulation 1924/2006 criteria to be labeled as a “source of protein.” Functional enrichment was further demonstrated by a four-fold increase in polyphenols (115.28–467.45 mg GAE/kg) and a corresponding rise in total flavonoids (63.40–262.28 mg GAE/kg), as well as by enhanced antioxidant capacity evaluated through DPPH (194.42–658.89 mg Trolox/kg) and ABTS assays (486.05–1647.23 mg Trolox/kg). Sensory analysis (CATA, PCoA) indicated that low substitution levels (≤10%) preserved traditional acceptability, whereas higher levels (≥30%) introduced nutty aroma and denser texture, perceived by consumers as novel. These findings highlight hemp seed cake as a multifunctional ingredient that improves nutritional density, enhances bioactive potential, and supports circular economy principles in the bakery sector. Full article

The growing consumer demand for plant-based, protein- and fiber-enriched foods has encouraged the incorporation of novel functional ingredients into bakery products. Hemp flour (HF), obtained from cold-pressed hemp seeds, represents a sustainable ingredient rich in proteins, dietary fibers, lipids, and bioactive compounds, making it suitable for nutritional fortification. This study investigated the impact of HF addition (5–40%) on the quality of muffins prepared with wheat flour (WF) and whole wheat flour (WWF). An initial hedonic sensory evaluation identified 5–20% HF as the most acceptable substitution range, which was then subjected to detailed physicochemical, sensory, textural, colorimetric, and microbiological analyses. Incorporation of HF significantly increased protein (up to +44%), fiber (up to +172%), and ash (up to +76%) contents, while decreasing moisture (−39%). Both WF and WWF muffins darkened with HF incorporation, with a greater lightness reduction in WF. Texture changes (increased firmness and gumminess) were more pronounced in WF muffins. Sensory analysis revealed that WF muffins were best accepted at 10–15% HF, whereas WWF muffins maintained good acceptability up to 20% HF, indicating better integration of HF in the whole grain matrix. All samples complied with microbiological safety requirements. Overall, the optimal substitution level was 10–15% HF in WF muffins and 20% HF in WWF muffins, demonstrating that HF can enhance the nutritional profile of muffins while maintaining acceptable technological and sensory properties in a matrix-dependent manner. Full article

Food industries produce large amounts of by-products, valuable sources of bioactive compounds that can enhance gluten-free foods. This study evaluated the effect of hemp cake meal (HC) addition on the antioxidant, nutritional, technological, and sensorial properties of gluten-free sourdough breads. Rice flour, HC, and breads with increasing HC levels (0–30%) were analysed for ash, protein, lipids, soluble and insoluble fibre, phenols, tocols, and carotenoids. Technological traits, colour, and sensory quality were also assessed. HC showed higher contents of most compounds than rice flour. As a result, enriched breads displayed marked nutritional improvements: protein increased from 8.9 g/100 g (control) to 17.6 g/100 g (30% HC), lipids from 1.5 to 3.9 g/100 g, soluble fibre from 0.54 to 1.27 g/100 g, insoluble fibre from 3.2 to 13.4 g/100 g, and phenolics (mainly ellagic and rosmarinic acids, and caffeic and naringenin derivatives) from 10.8 to 174.8 mg/100 g. Tocols and carotenoids, though scarce, slightly increased. However, HC-enriched breads had lower volumes and a firmer, stickier texture. Nevertheless, up to 10% HC inclusion did not affect appearance, aroma, texture, or taste. Therefore, a moderate HC addition can improve antioxidants and the nutritional quality of gluten-free sourdough breads while maintaining a good sensory acceptability. Full article

Cannabis sativa L. is known for its high-value compounds, like Cannabidiol (CBD) and Cannabidiolic Acid (CBDA). It is widely used in the pharmaceutical and food industries. Different extraction methods, like Soxhlet and maceration, are commonly employed to obtain its extracts. High temperature and long extraction time can influence the yield and the purity of the extracts, affecting the quality of the final product. This study focused on optimizing CBD oil extraction from hemp inflorescences and its incorporation into a gluten-free bakery product for functionalization. Dynamic maceration (DME), assisted by ultrasound and microwave irradiation, was used. Our study explored the impact of varying sonication times (three distinct durations) and microwave powers (three levels, applied for two different irradiation times) on the resulting extracts. HPLC analysis was performed on these extracts. Subsequently, we used hemp flour and hemp oil to bake gluten-free cupcakes, which were fortified with the extracted CBD oil. Rheological characterization was used to investigate the cupcake properties, along with stereoscopic, color and puncture analysis performed on the baked samples. The most effective extraction parameters identified were 30 s of microwave irradiation at 700 W, yielding 45.2 ± 2.0 g of CBD extract, and 15 min of sonication, which resulted in 53.2 ± 2.5 g. Subsequent rheological characterization indicated that the product exhibited mechanical properties and a temperature profile comparable to a benchmark, evidenced by a height of 4.1 ± 0.2 cm and a hardness of 1.9 ± 0.2 N. These promising values demonstrate that hemp oil and hemp flour are viable ingredients for traditional cakes and desserts, notably contributing increased nutritional value through the CBD-enriched hemp oil and the beneficial profile of hemp flour. Full article

In the present study, the primary by-products of the hemp-seed oil process—hemp seed cake flour and hemp seed protein concentrate—underwent enzymatic hydrolysis using proteases and carbohydrases, either individually or in combination. The effectiveness of these enzymatic treatments in releasing bioactive compounds was evaluated by assessing the antioxidant and anti-inflammatory properties of the aqueous extracts of both hydrolysed and untreated hemp by-products. The aim was to explore their potential senotherapeutic properties and promote their application as dietary supplements. Secondary metabolites such as flavonoids, phenolic acids, and catechins were analysed using high-performance liquid chromatography. Total phenolic, flavonoid, and protein contents were determined using spectrophotometric methods. Scavenging activity (2,2-Diphenyl-1-picrylhydrazyl scavenging assay (DPPH assay)), antioxidant power (Ferric reducing antioxidant power assay (FRAP assay)), and lipid peroxidation-reducing activity (thiobarbituric acid-reactive substance analysis) were assessed through in vitro assays. Possible anti-inflammatory effects were evaluated by assessing haemolysis inhibition. The impact of extracts on albumin glycation induced by exposure to fructose was also determined. To assess the toxicity of extracts, a zebrafish larvae model was employed. All extracts contained significant amounts of phenolic compounds, flavonoids, and proteins, and they exhibited notable activities in reducing lipid peroxidation and stabilising erythrocyte cell membranes. However, they did not significantly influence protein glycation (the glycation inhibition was only in the range of 15–40%). Our research demonstrates the substantial health-promoting potential, including senescence delay, of aqueous extracts from by-products of the hemp-seed oil process, which are available in large quantities and can serve as valuable supplements to support the health of animals, including humans, rather than being discarded as waste from oil production. Full article

Hemp (Cannabis sativa L.) is a versatile crop that can be processed to obtain different products with multiple applications. Its seeds are a well-documented ancient source of proteins, fibers and fats, all of which possess high nutritional value. Additionally, metabolites such as flavones and phenols are present in the seeds, contributing to their antioxidant properties. Due to hemp seeds’ distinctive nutritional profile, the interest in exploring the potential use in food and nutraceuticals is growing, and they can be considered an interesting and promising alternative resource for human and animal feeding. Omics studies on hemp seeds and their by-products are also being developed, and they contribute to improving our knowledge about the genome, transcriptome, proteome, metabolome/lipidome, and ionome of these sustainable food resources. This review illustrates the main nutrients and bioactive compounds of hemp seeds and explores the most relevant omics techniques and investigations related to them. It also addresses the various products derived from processing the whole seed, such as oil, dehulled seeds, hulls, flour, cakes, meals, and proteins. Moreover, this work discusses research aimed at elucidating the molecular mechanisms underlying their protein, lipid, fiber, and metabolic profile. The advantages of using omics and multi-omics approaches to highlight the nutritional values of hemp seed by-products are also discussed. In our opinion, this work represents an excellent starting point for researchers interested in studying hemp seeds as source of nutrients and bioactive compounds from a multi-level molecular perspective. Full article

This study explores the potential of some commercially available plant proteins to increase the protein content of gluten free cookies produced from green lentil flour. Isolates from hemp seed, brown rice, yellow pea, and pumpkin seed were investigated. Cookies were additionally enriched with inulin and matcha tea. Products were characterized in terms of physicochemical parameters (e.g., crude protein content, total phenolics and flavonoids, antioxidant activity, and color). Additionally, technological properties including geometry, baking loss, and texture profile were determined, and a sensory profile test was conducted. The replacement of a quarter of lentil flour with plant proteins increased the protein content (control: 12.4% vs. 15.1–20.4%), but suppressed the polyphenol content, resulting in reduced antioxidant capacity (3.13 vs. 2.14–2.69 mmol TE/100 g). The geometry, texture properties, and color of the cookies were affected by all the proteins investigated. The biggest difference was shown in the case of using yellow pea (YP) protein, which showed the highest browning index (YP: 66.36 vs. 42.63–63.45) and spread ratio (8.38 vs. 5.63–6.39) among the samples tested. The sensory attributes of the cookies, such as tea notes, surface homogeneity, crunchiness, and crumbliness, proved to be negatively affected by the plant proteins, which may be a limitation for consumer acceptance. Full article

Legume cultivation is important for a wide array of reasons, including its positive effects on the environment, the economy, and human health. Legumes have different amino acid profiles that complement those of the three globally most important staple foods (rice, corn, and wheat). Therefore, the aim of this work was to assess the functionality of legume flours (as well as hemp as an emerging hemp protein source) as enriching supplements in breadmaking. The research focused on both the nutritional and sensory evaluation of flour with the assistance of novel research techniques such as diffusing wave spectroscopy and static multiple light scattering. The nutritional value of yellow and green peas as well as chickpeas was comparable, with the most noticeable difference being total fiber content, that ranged between 6.8 and 9.7 g/100 g of flour. Hemp flour outclassed all legume flours both in terms of protein content as well as fiber, which was over quadrupled. However, it was associated with the cost of worse technological properties. Addition of all investigated flours increased the dough stability, which was proved by static multiple light scattering and a reduction in the Turbiscan Stability Index. Microrheology of the dough was improved only by the addition of yellow pea flour, which was manifested by an increase in the macroscopic viscosity index and decrease in the fluidity index. This flour had also the most beneficial properties for the bread quality, including texture and sensory perception, including appearance, taste, and overall acceptance. Full article