Search Results (13)

Ghost imaging (GI) facilitates image acquisition under low-light conditions through single pixel measurements, thus holding tremendous potential across various fields such as biomedical imaging, remote sensing, defense and military applications, and 3D imaging. However, in order to reconstruct high-resolution images, GI typically requires a large number of single-pixel measurements, which imposes practical limitations on its application. Parallel ghost imaging addresses this issue by utilizing each pixel of a position-sensitive detector as a bucket detector to simultaneously perform tens of thousands of ghost imaging measurements in parallel. In this work, we explore the non-local characteristics of ghost imaging in depth, and by constructing a large speckle space, we achieve a reconstruction result in parallel ghost imaging where the field of view surpasses the limitations of the reference arm detector. Using a computational ghost imaging framework, after pre-recording the speckle patterns, we are able to complete X-ray ghost imaging at a speed of 6 min per sample, with image dimensions of 14,000 × 10,000 pixels (4.55 mm × 3.25 mm, millimeter-scale field of view) and a pixel resolution of 0.325 µm (sub-micron pixel resolution). We present this framework to enhance efficiency, extend resolution, and dramatically expand the field of view, with the aim of providing a solution for the practical implementation of ghost imaging. Full article

Ghost imaging (GI) is an imaging modality typically based on correlations between a single-pixel (bucket) detector collecting the electromagnetic field which was transmitted through or reflected from an object and a high-resolution detector which measures the field that did not interact with the object. When using partially coherent sources, fluctuations can be introduced into a beam by rotating or translating a diffuser, and then the beam is split into two beams with identical intensity fluctuations. In computational GI, the diffuser with an unknown scatter distribution is replaced by a diffuser with a known scatter distribution so that the reference beam and high-resolution detector can be discarded. In this work, we wish to examine how the relation between the diffuser’s autocorrelation length and its spatial displacement affects the quality of image reconstruction obtained with these methods. We first analyze this general question theoretically and simulatively, and we then present some specific, proof-of-principle results we obtained in an optical setup. Finally, we discuss the relation between theory and experiment, suggesting some general conclusions regarding the preferred working points. Full article

In this study, a tracking and pointing control system with a dual-FSM (fast steering mirror) two-dimensional flexible turntable composite axis is proposed. It is applied to the target-tracking accuracy control in a GI LiDAR (ghost imaging LiDAR) system. Ghost imaging is a multi-measurement imaging method; the dual-FSM GI LiDAR tracking and pointing imaging control system proposed in this study mainly solves the problems of the high-resolution remote sensing imaging of high-speed moving targets and various nonlinear disturbances when this technology is transformed into practical applications. Addressing the detrimental effects of nonlinear disturbances originating from internal flexible mechanisms and assorted external environmental factors on motion control’s velocity, stability, and tracking accuracy, a nonlinear active disturbance rejection control (NLADRC) method based on artificial neural networks is advanced. Additionally, to overcome the limitations imposed by receiving aperture constraints in GI LiDAR systems, a novel optical path design for the dual-FSM GI LiDAR tracking and imaging system is put forth. The implementation of the described methodologies culminated in the development of a dual-FSM GI LiDAR tracking and imaging system, which, upon thorough experimental validation, demonstrated significant improvements. Notably, it achieved an improvement in the coarse tracking accuracy from 193.29 μrad (3σ) to 87.21 μrad (3σ) and enhanced the tracking accuracy from 10.1 μrad (σ) to 1.5 μrad (σ) under specified operational parameters. Furthermore, the method notably diminished the overshoot during the target capture process from 28.85% to 12.8%, concurrently facilitating clear recognition of the target contour. This research contributes significantly to the advancement of GI LiDAR technology for practical application, showcasing the potential of the proposed control and design strategies in enhancing system performance in the face of complex disturbances. Full article

Ghost imaging (GI) is a novel imaging technique which realizes the fluctuation of the target light field through pattern modulation and obtains the target information in a non-local area. Compared with traditional imaging, GI has the advantages of a simple structure, strong anti-interference ability and imaging resolution beyond the diffraction limit. Illumination patterns are very important for GI, and they are divided into uniform resolution patterns and variable-resolution patterns. The variable-resolution patterns have the characteristics of high resolution in the foveal region and low resolution in the edge region, which can quickly improve the imaging efficiency of the foveal region. But there are still mass mutations and the inability to adapt imaging. Therefore, we propose a hybrid non-resolution-pattern design method and a two-step projection strategy. Simulations and experiments show that the proposed two-step projection strategy can accurately establish the corresponding relationship between the foveal region and the region of interest. The hybrid variable-resolution pattern design method can solve the problem of mass mutation between the foveal region and the edge region of fixed foveal patterns. Full article

This study presents a computational ghost imaging (GI) scheme that utilizes sequenced random speckle pattern illumination. The primary objective is to develop a speckle pattern/sequence that improves computational time without compromising image quality. To achieve this, we modulate the sequence of speckle sizes and design experiments based on three sequence rules for ordering the random speckle patterns. Through theoretical analysis and experimental validation, we demonstrate that our proposed scheme achieves a significantly better contrast-to-noise rate (CNR) compared to traditional GI at a similar resolution. Notably, the sequential GI method outperforms conventional approaches by providing over 10 times faster computational speed in certain speckle composition groups. Furthermore, we identify the corresponding speckle sizes that yield superior image quality, which are found to be geometrically proportional to the reference object area. This innovative approach utilizing sequenced random speckle patterns demonstrates potential suitability for imaging objects with complex or unknown shapes. The findings of this study hold great promise for advancing the field of computational GI and pseudo-thermal GI, addressing the need for improved computational efficiency while maintaining high-quality imaging. Full article

An optical coherence tomography (OCT) system based on the ghost imaging (GI) technique is developed for correctly imaging in scattering media. Usually, the scattering in the media leads to a decrease in the signal-to-noise ratio of the reconstructed image. This problem can be solved by using ghost imaging-OCT(GI-OCT), but the number of patterns required for GI reconstruction depends on the concentration of the scattering media. Therefore, studying the relationship between the intensity distribution in reconstructed images and the optical properties of scattering media is essential. In this study, image reconstruction is carried out in scattering media with a concentration of 0.0% to 1.4%, diluted from processed milk. Using the structural similarity index method (SSIM) to analyze the reconstruction condition, it is found that the target image can be reconstructed correctly when the SSIM value is more than 0.7. By analyzing the intensity distribution of the reconstructed image, the results show that the extinction coefficient of the scattering media is negatively correlated with the contrast of the reconstructed image and positively correlated with the scattering intensity. Their correlation coefficients are −0.94 and 0.99, respectively. Full article

Underwater imaging technique is a crucial tool for humans to develop, utilize, and protect the ocean. We comprehensively compare the imaging performance of twenty-four ghost imaging (GI) methods in the underwater environment. The GI methods are divided into two types according to the illumination patterns, the random and orthogonal patterns. Three-group simulations were designed to show the imaging performance of the twenty-four GI methods. Moreover, an experimental system was built, and three-group experiments were implemented. The numerical and experimental results demonstrate that the orthogonal pattern-based compressed sensing GI methods have strong antinoise capability and can restore clear images for underwater objects with a low measurement number. The investigation results are helpful for the practical applications of the underwater GI. Full article

Unlike traditional optical imaging schemes, computational ghost imaging (CGI) provides a way to reconstruct images with the spatial distribution information of illumination patterns and the light intensity collected by a single-pixel detector or bucket detector. Compared with stationary scenes, the relative motion between the target and the imaging system in a dynamic scene causes the degradation of reconstructed images. Therefore, we propose a time-variant retina-like computational ghost imaging method for axially moving targets. The illuminated patterns are specially designed with retina-like structures, and the radii of foveal region can be modified according to the axial movement of target. By using the time-variant retina-like patterns and compressive sensing algorithms, high-quality imaging results are obtained. Experimental verification has shown its effectiveness in improving the reconstruction quality of axially moving targets. The proposed method retains the inherent merits of CGI and provides a useful reference for high-quality GI reconstruction of a moving target. Full article

Different from conventional imaging, ghost imaging (GI) is an indirect modality of imaging that needs multiple measurements of the second-order correlation of data collected from two detectors. In some particular cases, the exposure time of two detectors or the rotation speed of the ground glass may not meet the need of experimental condition, resulting in motion blur that reduces the quality of the reconstructed image. In this paper, we propose a method to solve this problem. By convolving the data from the reference arm with the Hessian matrix, the intensity of the light in the data is replaced by the gradient of intensity and the influence of the motion blur in the reconstructed image can be reduced. Full article

Ghost imaging (GI) is an indirect imaging approach that can retrieve an object’s image even in a harsh environment through measuring the fourth-order correlation function (FOCF) between the signal and idle optical paths. In this paper, we study lensless GI with a partially coherent beam carrying twist phase, i.e., twisted Gaussian Schell-model (TGSM) beam, in the presence of oceanic turbulence. Explicit expression of the FOCF is derived based on the optical coherence theory and Rytov approximation, and the effects of the twist phase and the oceanic turbulence on the quality and visibility of image are investigated in detail through numerical examples. Our results show that the simulated oceanic turbulence strongly affects the GI. The quality of image decreases monotonously with an increase of the strength of turbulence whereas the visibility increases. When the illumination light carries a twist phase, the visibility of the image is improved while the quality of the image is reduced in contrast to those without a twist phase. By properly selecting the strength of the twist phase, the image can still be maintained at an acceptable level of quality with high visibility. Furthermore, it is found that the quality and visibility of the ghost image are less affected by the oceanic turbulence using a TGSM beam with larger twist factor. Our findings will be useful for the application of GI in an oceanic turbulent environment. Full article

This work experimentally demonstrates that the imaging quality of quantum ghost imaging (GI) with entangled photons can be significantly improved by properly handling the errors caused by the imperfection of optical devices. We also consider compressive GI to reduce the number of measurements and thereby the data acquisition time. The image reconstruction is formulated as a sparse total least square problem which is solved with an iterative algorithm. Our experiments show that, compared with existing methods, the new method can achieve a significant performance gain in terms of mean square error and peak signal–noise ratio. Full article

Different from conventional imaging methods, which are based on the first-order field correlation, ghost imaging (GI) obtains the image information through high-order mutual-correlation of light fields from two paths with an object appearing in only one path. As a new optical imaging technology, GI not only provides us new capabilities beyond the conventional imaging methods, but also gives out a new viewpoint of imaging physical mechanism. It may be applied to many potential applications, such as remote sensing, snap-shot spectral imaging, thermal X-ray diffraction imaging and imaging through scattering media. In this paper, we reviewed mainly our research work of ghost imaging via sparsity constraints (GISC) and discussed the application and theory prospect of GISC concisely. Full article

Ghost imaging via sparsity constraint (GISC)—which is developing into a new staring imaging lidar—can obtain both the range information and spatial distribution of a remote target with the use of the measurements below the Nyquist limit. In this work, schematics of both two-dimensional (2D) and three-dimensional (3D) GISC lidar are introduced. Compared with the 2D GISC lidar, we demonstrate by both simulation and experimentally that the signal-to-noise ratio of the 3D GISC lidar can be dramatically enhanced when a time-resolved technique is used to record the target’s reflection signals and the orthogonal characteristic of the target’s 3D surface structure is taken as a priori in the image reconstruction process. Some characteristics of the 2D and 3D GISC lidar systems are also discussed. Full article