Search Results (28)

TRIM4Post-Mining is a H2020/RFCS-funded project that brings together a consortium of European experts from industry and academia to develop an integrated information modelling system. This is designed to support decision making and planning during the transition from coal exploitation to a revitalized post-mining landscape, enabling infrastructure development for agricultural and industrial utilization, and contributing to the recovery of energy and materials from coal mining dumps. The smart system will be founded upon a high-resolution spatiotemporal database, utilizing state-of-the-art multi-scale and multi-sensor monitoring technologies that characterize dynamic processes in coal waste dumps related to timely, dependent deformation and geochemical processes. It will integrate efficient methods for operational and post-mining monitoring, comprehensive spatiotemporal data analytics, feature extraction, and predictive modelling; this will allow for the identification of potential contamination areas and the forecasting of geotechnical risks and ground conditions. For the interactive exploration of alternative land-use planning scenarios—in terms of residual risks, technical feasibility, environmental and social impact, and affordability—up-to-date data and models will be embedded in an interactive planning system based on Virtual Reality and Augmented Reality technology, forming a TRIM—a Transition Information Modelling System. This contribution presents the conceptual approach and main constituents, and describes the state-of-the-art and detailed anticipated methodological approach for each of the constituents. This is supported by the presentation of the first results and a discussion of future work. An anticipated second contribution will focus on the main findings, technology readiness and a discussion of future work. Full article

Worldwide, cities with mountainous areas struggle with an increasing landslide risk as a consequence of global warming and population growth, especially in low-income informal settlements. Landslide Early Warning Systems (LEWS) are an effective measure to quickly reduce these risks until long-term risk mitigation measures can be realized. To date however, LEWS have only rarely been implemented in informal settlements due to their high costs and complex operation. Based on modern Internet of Things (IoT) technologies such as micro-electro-mechanical systems (MEMS) sensors and the LoRa (Long Range) communication protocol, the Inform@Risk research project is developing a cost-effective geosensor network specifically designed for use in a LEWS for informal settlements. It is currently being implemented in an informal settlement in the outskirts of Medellin, Colombia for the first time. The system, whose hardware and firmware is open source and can be replicated freely, consists of versatile LoRa sensor nodes which have a set of MEMS sensors (e.g., tilt sensor) on board and can be connected to various different sensors including a newly developed low cost subsurface sensor probe for the detection of ground movements and groundwater level measurements. Complemented with further innovative measurement systems such as the Continuous Shear Monitor (CSM) and a flexible data management and analysis system, the newly developed LEWS offers a good benefit-cost ratio and in the future can hopefully find application in other parts of the world. Full article

The size, volume, variety, and velocity of geospatial data collected by geo-sensors, people, and organizations are increasing rapidly. Spatial Data Infrastructures (SDIs) are ongoing to facilitate the sharing of stored data in a distributed and homogeneous environment. Extracting high-level information and knowledge from such datasets to support decision making undoubtedly requires a relatively sophisticated methodology to achieve the desired results. A variety of spatial data mining techniques have been developed to extract knowledge from spatial data, which work well on centralized systems. However, applying them to distributed data in SDI to extract knowledge has remained a challenge. This paper proposes a creative solution, based on distributed computing and geospatial web service technologies for knowledge extraction in an SDI environment. The proposed approach is called Knowledge Discovery Web Service (KDWS), which can be used as a layer on top of SDIs to provide spatial data users and decision makers with the possibility of extracting knowledge from massive heterogeneous spatial data in SDIs. By proposing and testing a system architecture for KDWS, this study contributes to perform spatial data mining techniques as a service-oriented framework on top of SDIs for knowledge discovery. We implemented and tested spatial clustering, classification, and association rule mining in an interoperable environment. In addition to interface implementation, a prototype web-based system was designed for extracting knowledge from real geodemographic data in the city of Tehran. The proposed solution allows a dynamic, easier, and much faster procedure to extract knowledge from spatial data. Full article

The Terrestrial Photogrammetry Scanner (TEPHOS) offers the possibility to precisely monitor linear erosion features using the Structure from Motion (SfM) technique. This is a static, multi-camera array and dynamically moves the digital videoframe camera designed to obtain 3-D models of rills before and after the runoff experiments. The main goals were to (1) obtain better insight into the rills; (2) reduce the technical gaps generated during the runoff experiments using only one camera; (3) enable the visual location of eroded, transported and accumulated material. In this study, we obtained a mean error for all pictures reaching up to 0.00433 pixels and every single one of them was under 0.15 pixel. So, we obtained an error of about 1/10th of the maximum possible resolution. A conservative value for the overall accuracy was one pixel, which means that, in our case, the accuracy was 0.0625 mm. The point density, in our example, reached 29,484,888 pts/m². It became possible to get a glimpse of the hotspots of sidewall failure and rill-bed incision. We conclude that the combination of both approaches—rill experiment and 3D models—will make easy under laboratory conditions to describe the soil erosion processes accurately in a mathematical–physical way. Full article

Without geospatial data management, today’s challenges in big data applications such as earth observation, geographic information system/building information modeling (GIS/BIM) integration, and 3D/4D city planning cannot be solved. Furthermore, geospatial data management plays a connecting role between data acquisition, data modelling, data visualization, and data analysis. It enables the continuous availability of geospatial data and the replicability of geospatial data analysis. In the first part of this article, five milestones of geospatial data management research are presented that were achieved during the last decade. The first one reflects advancements in BIM/GIS integration at data, process, and application levels. The second milestone presents theoretical progress by introducing topology as a key concept of geospatial data management. In the third milestone, 3D/4D geospatial data management is described as a key concept for city modelling, including subsurface models. Progress in modelling and visualization of massive geospatial features on web platforms is the fourth milestone which includes discrete global grid systems as an alternative geospatial reference framework. The intensive use of geosensor data sources is the fifth milestone which opens the way to parallel data storage platforms supporting data analysis on geosensors. In the second part of this article, five future directions of geospatial data management research are presented that have the potential to become key research fields of geospatial data management in the next decade. Geo-data science will have the task to extract knowledge from unstructured and structured geospatial data and to bridge the gap between modern information technology concepts and the geo-related sciences. Topology is presented as a powerful and general concept to analyze GIS and BIM data structures and spatial relations that will be of great importance in emerging applications such as smart cities and digital twins. Data-streaming libraries and “in-situ” geo-computing on objects executed directly on the sensors will revolutionize geo-information science and bridge geo-computing with geospatial data management. Advanced geospatial data visualization on web platforms will enable the representation of dynamically changing geospatial features or moving objects’ trajectories. Finally, geospatial data management will support big geospatial data analysis, and graph databases are expected to experience a revival on top of parallel and distributed data stores supporting big geospatial data analysis. Full article

Unmanned aerial vehicle (UAV) remote sensing and deep learning provide a practical approach to object detection. However, most of the current approaches for processing UAV remote-sensing data cannot carry out object detection in real time for emergencies, such as firefighting. This study proposes a new approach for integrating UAV remote sensing and deep learning for the real-time detection of ground objects. Excavators, which usually threaten pipeline safety, are selected as the target object. A widely used deep-learning algorithm, namely You Only Look Once V3, is first used to train the excavator detection model on a workstation and then deployed on an embedded board that is carried by a UAV. The recall rate of the trained excavator detection model is 99.4%, demonstrating that the trained model has a very high accuracy. Then, the UAV for an excavator detection system (UAV-ED) is further constructed for operational application. UAV-ED is composed of a UAV Control Module, a UAV Module, and a Warning Module. A UAV experiment with different scenarios was conducted to evaluate the performance of the UAV-ED. The whole process from the UAV observation of an excavator to the Warning Module (350 km away from the testing area) receiving the detection results only lasted about 1.15 s. Thus, the UAV-ED system has good performance and would benefit the management of pipeline safety. Full article

Geo-sensor is the term used for the deployment of a wireless sensor network (WSN) in a real environment, which can be a hideous task due to many influential variables in a given environment. The spatial context of a sensor in a smart environment can be of huge significance and can also play an important role in improving the smart services provision. In this work, we propose a DIY geo-sensor framework and data composition toolbox for the deployment of sensors data in smart IoT environments along with geographical context. A geo-sensor framework is deployed, which enables the registration of multiple geo-sensor networks by providing multiple geo-sensor platforms. The framework’s logic is based on the combination of a geo-sensor service registry, geo-sensor composition toolbox, and geo-sensor platforms. A geo-sensor platform provides the content to the toolbox, enabling relaxed real-time geo-sensor data management. Our proposed work is two-fold. Firstly, we propose the design details for the geo-sensor framework and composition toolbox. The proposed design for the geo-sensor framework aims to provide a DIY platform for multiple geo-sensor networks and services deployment, giving access to multiple users resulting in reuse of resources and reduction in deployment costs by avoiding duplicate deployments. Secondly, we implement the proposed design based on RESTful web services and SOAP web services. Performance comparison analysis is then performed among the two web services to find the best suited implementation for given scenarios. The results of the performance analysis prove that RESTful web services are the better choice for ease of implementation, access, and light-weightiness. Full article

Precise orbit products are essential and a prerequisite for global navigation satellite system (GNSS) applications, which, however, are unavailable or unusable when satellites are undertaking maneuvers. We propose a clock-constrained reverse precise point positioning (RPPP) method to generate the rather precise orbits for GNSS maneuvering satellites. In this method, the precise clock estimates generated by the dynamic precise orbit determination (POD) processing before maneuvering are modeled and predicted to the maneuvering periods and they constrain the RPPP POD during maneuvering. The prediction model is developed according to different clock types, of which the 2-h prediction error is 0.31 ns and 1.07 ns for global positioning system (GPS) Rubidium (Rb) and Cesium (Cs) clocks, and 0.45 ns and 0.60 ns for the Beidou navigation satellite system (BDS) geostationary orbit (GEO) and inclined geosynchronous orbit (IGSO)/Median Earth orbit (MEO) satellite clocks, respectively. The performance of this proposed method is first evaluated using the normal observations without maneuvers. Experiment results show that, without clock-constraint, the average root mean square (RMS) of RPPP orbit solutions in the radial, cross-track and along-track directions is 69.3 cm, 5.4 cm and 5.7 cm for GPS satellites and 153.9 cm, 12.8 cm and 10.0 cm for BDS satellites. When the constraint of predicted satellite clocks is introduced, the average RMS is dramatically reduced in the radial direction by a factor of 7–11, with the value of 9.7 cm and 13.4 cm for GPS and BDS satellites. At last, the proposed method is further tested on the actual GPS and BDS maneuver events. The clock-constrained RPPP POD solution is compared to the forward and backward integration orbits of the dynamic POD solution. The resulting orbit differences are less than 20 cm in all three directions for GPS satellite, and less than 30 cm in the radial and cross-track directions and up to 100 cm in the along-track direction for BDS satellites. From the orbit differences, the maneuver start and end time is detected, which reveals that the maneuver duration of GPS satellites is less than 2 min, and the maneuver events last from 22.5 min to 107 min for different BDS satellites. Full article

Social media platforms such as Twitter are extensively used for expressing and exchanging thoughts, opinions, ideas, and feelings, i.e., reactions concerning a topic or an event. Factual information about an event to which people are reacting can be obtained from different types of (geo-)sensors, official authorities, or the public press. However, these sources hardly reveal the emotional or attitudinal impact of events on people, which is, for example, reflected in their reactions on social media. Two approaches that utilize emojis are proposed to obtain the sentiment and emotions contained in social media reactions. Subsequently, these two approaches, along with visualizations that focus on space, time, and topic, are applied to Twitter reactions in the example case of Brexit. Full article

The timely sharing and interoperation of multi-source cross-sectoral information is an important issue for a Geographic Information System (GIS). To study this issue, a real-time and open GIS model called GeoSensor is proposed in this work. GeoSensor integrates the real-time GIS model, real-time computation framework, and Open Geospatial Consortium services. This paper illustrates the system architecture and the implementation methods of the GeoSensor. One of the methods developed is the conceptual mapping of a real-time GIS data model to open GIS models and services and a real-time computation framework. The other method developed is the integration of open GIS services, a real-time computation framework, and hybrid databases. The GeoSensor was tested in a case study of building a smart river. In the case study, a comprehensive sensor web was constructed and integrated with the real-time information on rainfall, beacon, channel, sediment, and water levels derived from space-based sensors, air-borne sensors, and underground sensors from multiple sectors in the Yangtze River basin. The GeoSensor manages the comprehensive sensor web with 32 types of sensors and more than 10 billion observation records. Three application systems were developed based on the GeoSensor to manage flood control, hydropower production, and navigation of the Yangtze River. The results of the three application systems show that the real-time and open system improves the management efficiency of the Yangtze River. This system is promising for managing smart rivers. Full article

Obtaining and visualizing the internal state and position information of the remote device using sensors are important aspects of industrial manufacturing. For large-scale geo-sensors that have been recently used, map-based management and visualization of the geo-sensor devices have become ubiquitous. Users often build multiple map symbols to represent the multiple states of a device based on traditional map symbols. Visualizing multiple geo-sensor data in real time with one map symbol is difficult. In this paper, a protocol-coupling map symbol and a construction method for real-time data visualization is introduced where different sensor states of the geo-sensor are expressed with one symbol. The sensor data visualization method in supervisory control and data acquisition systems (SCADA) was introduced and applied to the construction and visualization process of map symbols. First, based on the traditional vector map symbols and the communication protocol parsing interface, the mapping relationship between the sensor data item and the graphic element is defined in the map symbol construction process. Second, by referring to the streaming services method in ArcGIS GeoEvent, geo-sensor data acquisition and a transfer broker in a GIS server is built, through which the real-time sensor data can be transferred from the remote side to the map client and used for map symbol rendering. Finally, the new map symbols are used for real-time geo-sensor data visualization in applications. In the application of the real-time monitoring of geo-sensor devices, remote device information was acquired by sensor and transmitted to the broker then cached on the server side. If the cached sensor data has changed compared to the previous, the changed data will be pushed to map client by broker. The communication module in the map client that communicates with the broker receives changed geo-sensor data and triggers a refresh of the map. Then the protocol-coupling map symbol is rendered according to the mapping profile and the status of the geo-sensor device will be displayed on the map in real time. All the methods and processes were verified in client-server and browser-server GIS architecture. Full article

Slums are a global urban challenge, with less developed countries being particularly impacted. To adequately detect and map them, data is needed on their location, spatial extent and evolution. High- and very high-resolution remote sensing imagery has emerged as an important source of data in this regard. The purpose of this paper is to critically review studies that have used such data to detect and map slums. Our analysis shows that while such studies have been increasing over time, they tend to be concentrated to a few geographical areas and often focus on the use of a single approach (e.g., image texture and object-based image analysis), thus limiting generalizability to understand slums, their population, and evolution within the global context. We argue that to develop a more comprehensive framework that can be used to detect and map slums, other emerging sourcing of geospatial data should be considered (e.g., volunteer geographic information) in conjunction with growing trends and advancements in technology (e.g., geosensor networks). Through such data integration and analysis we can then create a benchmark for determining the most suitable methods for mapping slums in a given locality, thus fostering the creation of new approaches to address this challenge. Full article

Static geosensor networks are comprised of stations with sensor devices providing data relevant for monitoring environmental phenomena in their geographic perimeter. Although early warning systems for disaster management rely on data retrieved from these networks, some limitations exist, largely in terms of insufficient coverage and low density. Crowdsourcing user-generated data is emerging as a working methodology for retrieving real-time data in disaster situations, reducing the aforementioned limitations, and augmenting with real-time data generated voluntarily by nearby citizens. This paper explores the use of crowdsourced user-generated sensor weather data from mobile devices for the creation of a unified and densified geosensor network. Different scenario experiments are adapted, in which weather data are collected using smartphone sensors, integrated with the development of a stabilization algorithm, for determining the user-generated weather data reliability and usability. Showcasing this methodology on a large data volume, a spatiotemporal algorithm was developed for filtering on-line user-generated weather data retrieved from WeatherSignal, and used for simulation and assessment of densifying the static geosensor weather network of Israel. Geostatistical results obtained proved that, although user-generated weather data show small discrepancies when compared to authoritative data, with considerations they can be used alongside authoritative data, producing a densified and augmented weather map that is detailed and continuous. Full article

With the growing development of smart cities, public transit forecasting has begun to attract significant attention. In this paper, we propose an approach for forecasting passenger boarding choices and public transit passenger flow. Our prediction model is based on mining common user behaviors for semantic trajectories and enriching features using knowledge from geographic and weather data. All the experimental data comes from the Ridge Nantong Limited bus company and Alibaba platform which is also open to the public. We evaluate our approach using various data sources, including point of interest (POI), weather condition, and public bus information in Guangzhou to demonstrate its effectiveness. Experimental results show that our proposal performs better than baselines in the prediction of passenger boarding choices and public transit passenger flow. Full article

Physical environmental processes, such as the evolution of precipitation or the diffusion of chemical clouds in the atmosphere, can be approximated by numerical models based on the underlying physics, e.g., for the purpose of prediction. As the modeling process is often very complex and resource demanding, such models are sometimes replaced by those that use historic and current data for calibration. For atmospheric (e.g., precipitation) or oceanographic (e.g., sea surface temperature) fields, the data-driven methods often concern the horizontal displacement driven by transport processes (called advection). These methods rely on flow fields estimated from images of the phenomenon by computer vision techniques, such as optical flow (OF). In this work, an algorithm is proposed for estimating the motion of spatio-temporal fields with the nodes of a geosensor network (GSN) deployed in situ when images are not available. The approach adapts a well-known raster-based OF algorithm to the specifics of GSNs, especially to the spatial irregularity of data. In this paper, the previously introduced approach has been further developed by introducing an error model that derives probabilistic error measures based on spatial node configuration. Further, a more generic motion model is provided, as well as comprehensive simulations that illustrate the performance of the algorithm in different conditions (fields, motion behaviors, node densities and deployments) for the two error measures of motion direction and motion speed. Finally, the algorithm is applied to data sampled from weather radar images, and the algorithm performance is compared to that of a state-of-the-art OF algorithm applied to the weather radar images directly, as often done in nowcasting. Full article