Search Results (600)

As the demand for high-speed space-borne data transmission grows, CubeSat-based Free-Space Optical Communication (FSOC) offers a viable solution for achieving a Gbps-speed optical intersatellite link on low-cost platforms. The Very-High-Speed Intersatellite Optical Link System Using an Infrared Optical Terminal and Nanosatellite (VISION) mission aims to establish these high-speed laser crosslinks, which require a precise pointing and relative positioning system at relative distances up to 1000 km. A real-time relative navigation system was developed based on dual-frequency GPS pseudorange and carrier-phase measurements, incorporating an adaptive Kalman filter which uses innovation-based covariance matching to dynamically adjust process noise covariance. Hardware-integrated testing with GPS signal generators and onboard receivers validated its performance under realistic conditions, consistently achieving sub-meter positioning accuracy across baselines up to 1000 km. An integrated orbit–attitude simulation further evaluated the feasibility of the Pointing, Acquisition, and Tracking (PAT) system by combining real-time relative navigation outputs with an attitude control system. Simulation results showed that the PAT system maintained a total pointing error of 274.3 μrad, sufficient to sustain stable high-speed optical links. This study demonstrates that the VISION relative navigation and pointing systems, integrated within the PAT framework, enable precise real-time optical intersatellite communication using CubeSats. Full article

The study presents a robust methodology for simultaneous state and parameter estimation in nonlinear thermal systems, demonstrated on a counter-current heat exchanger model operating with nitrogen under industrial conditions. To address challenges of ill-conditioning and parameter correlation, local sensitivity analysis is combined with regularization through optimal parameter subset selection using orthogonalization and D-optimal experimental design. The Unscented Kalman Filter (UKF) is employed to jointly estimate the augmented state vector in real time, leveraging high-fidelity dynamic simulations generated in Unisim Design with the Peng–Robinson equation of state. The proposed framework achieves high estimation accuracy and numerical stability, even under limited sensor availability and measurement noise. Monte Carlo simulations confirm robustness to ±2.5% uncertainty in initial conditions, while residual autocorrelation analysis validates estimator optimality. The approach provides a practical solution for real-time monitoring and model-based control in industrial heat exchangers and offers a generalizable strategy for building identifiable, noise-resilient models of complex nonlinear systems. Full article

As robotic applications rapidly expand into increasingly complex and dynamic environments, greater emphasis is being placed on the intelligence and safety of human–robot collaboration at the task execution level. In shared human–robot workspaces, even the most precise motion planning cannot fully prevent collisions. To address this critical safety concern, we propose a variational Bayesian Kalman filtering-based external torque estimation algorithm that integrates the robot’s dynamic model while avoiding additional system complexity. We begin by reviewing the robot dynamics framework and the classical external torque estimation method based on generalized momentum. We then derive a Kalman filter-based approach for external torque estimation in robotic manipulators and analyze the adverse effects arising from mismatches in process noise covariance. Finally, we introduce a sliding window-based variational Bayesian Kalman filter, which dynamically estimates the current process noise covariance while simultaneously mitigating the accumulation of recursive errors. Full article

This paper presents a day-ahead forecasting approach for discharge profiles of a 0.5 MW battery energy storage system connected to the power grid, utilizing historical daily discharge profiles collected over one year to capture key operational patterns and variability. Two forecasting techniques are employed: a Kalman filter for dynamic state estimation and Holt’s exponential smoothing method enhanced with adaptive alpha to capture trend changes more responsively. These methods are applied to generate next-day discharge forecasts, aiming to support better battery scheduling, improve grid interaction, and enhance overall energy management. The accuracy and robustness of the forecasts are evaluated against real operational data. The results confirm that combining model-based and statistical techniques offers a reliable and flexible solution for short-term battery discharge prediction in real-world grid applications. Full article

To mitigate the degradation of positioning accuracy in sixth-generation mobile communication systems under dynamic line-of-sight (LOS) and non-line-of-sight (NLOS) conditions, this paper proposes an improved adaptive Kalman filter positioning method based on Orthogonal Time Frequency Space (OTFS)-modulated signals. Firstly, the distance can be measured by using the OTFS-modulated signals transmitted between base stations and nodes. Secondly, the distance information is converted into the distance difference information to establish the time difference of arrival (TDOA) positioning equation, which is preliminarily solved using the Chan algorithm. Thirdly, residuals are calculated based on the preliminary positioning results, dividing the complex environment into distinct regions and adaptively determining corresponding genetic factors for each region. Finally, the selected genetic parameters are substituted into the Sage–Husa adaptive Kalman filter equations to estimate positioning results. The simulation analysis demonstrates that in complex environments featuring both line-of-sight and non-line-of-sight conditions, the vehicle motion trajectories estimated using this method more closely approximate actual trajectories. Additionally, both the accuracy and stability of positioning results show significant improvement compared to traditional methods. Full article

A wide range of research has been conducted on path planning and collision avoidance to enhance the operational efficiency of unmanned aerial vehicles (UAVs). The existing works have mainly assumed an environment with static obstacles and global positioning system (GPS) signals. However, practical environments have often been involved with dynamic obstacles, dense areas with numerous obstacles in confined spaces, and blocked GPS signals. In order to consider these issues for practical implementation, a deep reinforcement learning (DRL)-based method is proposed for path planning and collision avoidance in GPS-denied and dense environments. In the proposed method, robust path planning and collision avoidance can be conducted by using the received signal strength (RSS) value with the extended Kalman filter (EKF). Additionally, the attitude of the UAV is adopted as part of the action space to enable the generation of smooth trajectories. Performance was evaluated under single- and multi-target scenarios with numerous dynamic obstacles. Simulation results demonstrated that the proposed method can generate smoother trajectories and shorter path lengths while consistently maintaining a lower collision rate compared to conventional methods. Full article

The classification of very-low-frequency and low-frequency (VLF/LF) lightning-radiation electric-field waveforms is of paramount importance for lightning-disaster prevention and mitigation. However, traditional waveform classification methods suffer from the complex characteristics of lightning waveforms, such as non-stationarity, strong noise interference, and feature coupling, limiting classification accuracy and generalization. To address this problem, a novel framework is proposed for VLF/LF lightning-radiated electric-field waveform classification. Firstly, an improved Kalman filter (IKF) is meticulously designed to eliminate possible high-frequency interferences (such as atmospheric noise, electromagnetic radiation from power systems, and electronic noise from measurement equipment) embedded within the waveforms based on the maximum entropy criterion. Subsequently, an attention-based multi-fusion convolutional neural network (AMCNN) is developed for waveform classification. In the AMCNN architecture, waveform information is comprehensively extracted and enhanced through an optimized feature fusion structure, which allows for a more thorough consideration of feature diversity, thereby significantly improving the classification accuracy. An actual dataset from Anhui province in China is used to validate the proposed classification framework. Experimental results demonstrate that our framework achieves a classification accuracy of 98.9% within a processing time of no more than 5.3 ms, proving its superior classification performance for lightning-radiation electric-field waveforms. Full article

Multi-view data, captured from various perspectives, is crucial for training view-invariant human action recognition models, yet its acquisition is hindered by spatio-temporal constraints and high costs. This study aims to develop the Pose Scene EveryWhere (PSEW) framework, which automatically generates temporally consistent, multi-view 3D human action data from a single monocular video. The proposed framework first predicts 3D human parameters from each video frame using a deep learning-based Human Mesh Recovery (HMR) model. Subsequently, it applies tracking, linear interpolation, and Kalman filtering to refine temporal consistency and produce naturalistic motion. The refined human meshes are then reconstructed into a virtual 3D scene by estimating a stable floor plane for alignment, and finally, novel-view videos are rendered using user-defined virtual cameras. As a result, the framework successfully generated multi-view data with realistic, jitter-free motion from a single video input. To assess fidelity to the original motion, we used Root Mean Square Error (RMSE) and Mean Per Joint Position Error (MPJPE) as metrics, achieving low average errors in both 2D (RMSE: 0.172; MPJPE: 0.202) and 3D (RMSE: 0.145; MPJPE: 0.206) space. PSEW provides an efficient, scalable, and low-cost solution that overcomes the limitations of traditional data collection methods, offering a remedy for the scarcity of training data for action recognition models. Full article

Electrochemical energy storage technology, primarily lithium-ion batteries, has been widely applied in large-scale energy storage systems. However, differences in assembly structures, manufacturing processes, and operating environments introduce parameter inconsistencies among cells within a pack, producing complex, high-volume datasets with redundant and fragmented charge–discharge records that hinder efficient and accurate system monitoring. To address this challenge, we propose a hybrid ASW-UKF-TRF framework for the classification and compression of battery data collected from energy storage power stations. First, an adaptive sliding-window Unscented Kalman Filter (ASW-UKF) performs online data cleaning, imputation, and smoothing to ensure temporal consistency and recover missing/corrupted samples. Second, a temporally aware TRF segments the time series and applies an importance-weighted, multi-level compression that formally prioritizes diagnostically relevant features while compressing low-information segments. The novelty of this work lies in combining deployment-oriented engineering robustness with methodological innovation: the ASW-UKF provides context-aware, online consistency restoration, while the TRF compression formalizes diagnostic value in its retention objective. This hybrid design preserves transient fault signatures that are frequently removed by conventional smoothing or generic compressors, while also bounding computational overhead to enable online deployment. Experiments on real operational station data demonstrate classification accuracy above 95% and an overall data volume reduction in more than 60%, indicating that the proposed pipeline achieves substantial gains in monitoring reliability and storage efficiency compared to standard denoising-plus-generic-compression baselines. The result is a practical, scalable workflow that bridges algorithmic advances and engineering requirements for large-scale battery energy storage monitoring. Full article

Electromagneticsoft actuator arrays (ESAAs) combine compliance with fast, controllable actuation and scalability, providing a promising foundation for the development of interconnected soft actuator arrays inspired by the structure and function of biological muscles. In this work, we present a control framework and an actuator selection strategy for an artificial soft muscle composed of ESAAs to enable accurate reference tracking. Since directly measuring the states of each ESA is often impractical in real-world applications, we first design a Kalman filter-based observer to estimate all system states from available observations. Using these estimates, we develop a Linear Quadratic Gaussian (LQG) controller to achieve reference tracking. Since thermal buildup from constant use can damage the actuators, we consider whether switching between different subsets of active actuators could offer thermal relief. While actuator switching intuitively suggests reduced heating by providing resting periods, our investigation reveals that this strategy can lead to higher thermal accumulation compared to the continuous mode. This is because we need substantially larger control effort when we have fewer active actuators in the switching mode, which, in the absence of effective active cooling, fail to provide sufficient heat dissipation during operation. Simulation results are presented to demonstrate the effectiveness of the proposed method in achieving the trajectory objective and to explore how switching affects the system’s thermal profile, revealing a trade-off between tracking performance and heat generation. Full article

The increasing integration of renewable energy resources, driven by carbon neutrality goals, has intensified load variability, thereby making very short-term load forecasting (VSTLF) more challenging. Accurate VSTLF is essential for the reliable and economical real-time operation of power systems. This study proposes a Long Short-Term Memory (LSTM)-based VSTLF model designed to predict nationwide power system load, including renewable generation over a six-hour horizon with 15 min intervals. The model employs a reconstituted load approach that incorporates photovoltaic (PV) generation effects and computes representative weather variables across the country. Furthermore, the most informative input features are selected through a combination of correlation analyses. To further enhance input sequences, pseudo-trend components are generated using a Kalman filter-based predictor and integrated into the model input. The Kalman filter-based pseudo-trend produced an MAPE of 1.724%, and its inclusion in the proposed model reduced the forecasting error (MAPE) by 0.834 percentage points. Consequently, the final model achieved an MAPE of 0.890%, which is under 1% of the 94,929 MW nationwide peak load. Full article

The recently developed localized particle filter (LPF) is extended to a fully coupled general circulation model (CGCM), specifically the Community Earth System Model (CESM), to assess its efficacy in assimilating multisource ocean observations, including satellite sea surface temperature (SST) and in situ temperature and salinity (TS) profiles. The LPF introduces localization in the weighting and resampling steps to avoid the filter degeneracy problem, thereby enhancing its performance in assimilating nonlinear systems. Data assimilation experiments using real ocean observations reveal that the LPF has notable advantages in improving the quality of subsurface and deep ocean temperature and salinity, particularly below 200 m. The results are evaluated against objective analysis data, confirming the potential applicability of the LPF in operational settings. Furthermore, a comparative analysis with the ensemble adjustment Kalman filter (EAKF) elucidates the merits and limitations of the LPF, and further underscores the pronounced advantage of LPF in the deep ocean. However, when TS profiles are already assimilated, supplementing the LPF with additional SST data produces adverse effects, a behavior markedly different from that of the EAKF. This discrepancy signals the need for refined data pre-processing strategies within the LPF in real operational applications. Full article

As foundational infrastructure for spatiotemporal information, the Global Navigation Satellite System (GNSS) delivers high-precision positioning, navigation, and timing (PNT) services worldwide. However, satellite atomic clock drift causes satellite clock bias, degrading PNT service quality. Compared to post-processed clock bias products and real-time estimation, satellite clock bias prediction offers a key advantage: it provides high-precision real-time clock bias even in scenarios with limited real-time data or poor communication. Through analysis and summarization of error sources in prediction models, this paper proposed generalized modeling frameworks for both classical and AI-based approaches. We reviewed current research on classical mathematical models—including polynomial, grey, Kalman filter, and time series models—and AI-based models such as machine learning (ML), multilayer perceptron (MLP), recurrent neural networks (RNN), and Transformer architectures. Technical characteristics, applicability, and limitations of each model were discussed. While AI-based models demonstrate superior flexibility and adaptability in complex scenarios compared to classical approaches, they require extensive datasets and computational resources. In conclusion, we summarized the advantages, disadvantages, and future research directions, offering insights for developing next-generation real-time high-precision GNSS PNT services. Full article

Aiming at the issue of time-varying measurement noise with heavy-tailed characteristics and outliers generated by the polarization compass (PC) in the micro-electro-mechanical system–inertial navigation system (MEMS-INS) and PC-integrated navigation system when it is subject to internal and external disturbances, an improved Variational Bayesian Innovation Saturation Robust Adaptive Kalman filter (VISKF) algorithm is proposed. This algorithm utilizes the variational Bayesian (VB) method based on Student’s t-distribution (STD) to approximately calculate the statistical characteristics of the time-varying measurement noise of the PC, thereby obtaining more accurate measurement noise statistical parameters. Additionally, the algorithm introduces an innovation saturation function and proposes an adaptive update strategy for the saturation boundary. It mitigates the problem of innovation value divergence in PC caused by outliers through a two-layer structure that can track the changes in the innovation value to adaptively adjust the saturation boundary. To verify the effectiveness of the algorithm, static and dynamic experiments were conducted on an unmanned vehicle. The experimental results show that compared with adaptive Kalman filter (AKF), variational Bayesian robust adaptive Kalman filter (VBRAKF), and innovation saturate robust adaptive Kalman filter (ISRAKF), the proposed algorithm improves the dynamic orientation accuracy by 76.89%, 67.23%, and 84.45%, respectively. Moreover, compared with other similar target algorithms, the proposed algorithm also has obvious advantages. Therefore, this method can significantly improve the navigation accuracy and robustness of the INS/PC integrated navigation system in complex environments. Full article

Accurate wellbore pressure management is critical for safety and efficiency in deep drilling, where narrow pressure windows and extreme high-temperature, high-pressure (HTHP) conditions exist. Current methods, including direct measurement and model-based prediction, face limitations such as sensor reliability issues and inaccurate lab-derived parameters. Data-driven AI methods lack interpretability and generalize poorly. This study proposes a model-data fusion approach to address these issues. It integrates mechanistic models with real-time data using the Unscented Kalman Filter (UKF) for real-time parameter correction. Friction correction factors are introduced to continuously update and optimize the estimation of frictional pressure drop. Validated with field data, the model demonstrates high accuracy, with absolute percentage errors below 5% and mean absolute errors (MAPE) below 1%. It also shows strong robustness, maintaining low MAPE (1.10–2.15%) despite significant variations in frictional pressure drop distribution. This method significantly enhances prediction reliability for safer ultra-deep drilling operations. Full article