Search Results (77)

Smectite clay minerals are known to readily form thixotropic physical gels in aqueous media, even at low volume fractions. Although the rheological properties of these gels are closely related to the microstructure of the network, the influence of the clay’s physicochemical characteristics remains insufficiently understood. In this study, we systematically investigated the relationships between particle size, cation exchange capacity, and zeta potential, and the rheological behavior of aqueous dispersions of four synthetic smectites. After thorough deionization, dispersions were prepared at controlled NaCl concentrations. We found that the zeta potential strongly correlates with the fineness of the network structure and governs macroscopic rheological responses such as viscosity, yield stress, and gelation behavior. Even under identical conditions, gel transparency and structural coarseness varied significantly among clay types. Furthermore, the storage modulus was influenced not only by network density but also by the intrinsic stiffness of the clay branches. These findings demonstrate that zeta potential serves as a unified indicator of structure and function in smectite dispersions and offer useful insights for gel design in colloidal and soft matter systems. Full article

With the rapid rise in Internet of Things (IoT) and artificial intelligence (AI) technologies, there is an increasing need for portable, wearable, and self-powered flexible sensing devices. In such scenarios, self-powered nanogenerators have emerged as promising energy harvesters capable of converting ambient mechanical stimuli into electrical energy, enabling the development of autonomous flexible sensors and sustainable systems. This review highlights recent advances in nanogenerator technologies—particularly those based on piezoelectric and triboelectric effects—with a focus on soft, flexible, and gel-based polymer materials. Key mechanisms of energy conversion are discussed alongside strategies to enhance performance through material innovation, structural design, and device integration. Special attention is given to the role of gel-type composites, which offer unique advantages such as mechanical tunability, self-healing ability, and biocompatibility, making them highly suitable for next-generation wearable, biomedical, and environmental sensing applications. We also explore the evolving landscape of energy applications, from microscale sensors to large-area systems, and identify critical challenges and opportunities for future research. By synthesizing progress across materials, mechanisms, and application domains, this review aims to guide the rational design of high-performance, sustainable nanogenerators for the next era of energy technologies. Full article

Visible-light photoredox catalysis using biacetyl (BA) as a low-cost photosensitizer enables the efficient formation of triarylethylenes (TAEs) via a Mizoroki–Heck-type coupling. The reaction proceeds efficiently in acetonitrile upon blue LED irradiation under anaerobic conditions. Alternatively, supramolecular viscoelastic gels have also been explored as reaction media, allowing the possibility of working under aerobic atmosphere. Mechanistic investigations by means of transient absorption spectroscopy and quenching experiments support a charge-separated intermediate pathway. Reaction quantum yield measurements further validate the efficiency of BA, demonstrating its potential as an alternative to transition-metal catalysts. Overall, this work presents a sustainable and scalable strategy for TAEs synthesis, integrating photoredox catalysis with soft material engineering. These findings pave the way for broader applications in green chemistry and functional materials. Full article

Super sulfate cement (SSC) serves as a sustainable alternative to ordinary Portland cement, offering lower carbon emissions and superior performance. Magnesium oxide (MgO) and building gypsum (BG) were utilized as activators for granulated blast furnace slag (GBFS), and together they formed SSC, which was employed to stabilize the waste soft clay (SC). The mechanical strength development characteristics of solidified clay and the types of its hydration products were investigated through mechanical experiments, including unconfined compressive strength (UCS) tests as well as microscopic experiments, such as X-ray diffraction tests and scanning electron microscopy tests. The mass ratios of GBFS, MgO, and BG were 8:2:0 (A2) and 6:2:2 (B1), respectively; these ratios were employed to stabilize the clay, resulting in solidified clay samples designated as S-A2 and S-B1. The UCS of S-B1 increased by 36.5% to 49.3% compared to S-A2 at the curing time from 7 to 91 days. The strength residual coefficients were 34.5% and 39.1% for S-A2 and S-B1, respectively, after ten wet–dry cycles. After soaking in sodium sulfate solution, the UCS of S-A2 and S-B1 decreased by 49.1% and 29.8%, respectively, compared to the unsoaked condition. The results of microscopic tests showed that the hydration products of S-B1 mainly included needle-like calcium silicate hydrate (C-S-H) gel, flaky hydrothermal gel, and ettringite (AFt) crystals. BG promoted the formation of AFt, while MgO facilitated the generation of C-S-H gel. In this study, SSC was used to stabilize the waste clay, which provided a way for the application of waste SC and SSC. Full article

The application of alkali-activated slag (AAS) cementing material to the curing of soft soil foundations has a good engineering application prospect and is economical and environmentally friendly. In this study, three different activators (Na₂O·nSiO₂, NaOH, Ca(OH)₂) were used to alkali-activate slag powder to solidify and improve soft soil in inland port areas. In order to explore the mechanical properties and strength formation mechanism of AAS-solidified soil under different activators, mechanical properties, and microscopic tests were carried out. Firstly, with unconfined compressive strength as the evaluation index, an orthogonal test of three factors, such as the type of activator, the amount of activator, and the amount of slag powder, was designed. Then, the unconfined compressive strength, resilience modulus, shear strength, and compression modulus of AAS-solidified soil were tested with the three activators under optimal dosage. Finally, phase composition, SEM-EDS, TG-DTG, and FT-IR analyses were carried out with the three AAS-solidified soils. The results show the following: (1) The factors affecting the unconfined compressive strength of AAS-solidified soil are ordered as follows: the type of activator > the amount of activator > the amount of slag powder. In addition, the optimal factors were as follows: activator type: Na₂O·nSiO₂; amount of activator: 3%; and amount of slag powder: 20%. (2) In considering the macroscopic mechanical properties, the effect of the activator is Na₂O·nSiO₂ > NaOH > Ca(OH)₂, and the Na₂O·nSiO₂ AAS-solidified soil has good early strength. (3) The hydration products of AAS are mainly C-A-S-H gel, N-A-S-H gel, and C-S-H gel, which increase the strength and cohesion of solidified soil. The results show that AAS-solidified soil with 0.7-modulus Na₂O·nSiO₂ as the activator has good engineering characteristics and can be used for curing soft soil foundations. Full article

Aliphatic unsegmented polyurethanes (PUs) have garnered relatively limited attention in the literature, despite their valuable properties such as UV resistance and biocompatibility, making them suitable for biomedical applications. This study focuses on synthesizing poly(ester-urethanes) (PEUs) using 1,6-hexamethylene diisocyanate and the macrodiol α,ω-hydroxy telechelic poly(ε-caprolactone) (HOPCLOH). To optimize the synthesis, a statistical experimental design approach was employed, a methodology not commonly utilized in polymer science. The influence of reaction temperature, time, reagent concentrations, and solvent type on the resulting PEUs was investigated. Characterization techniques included FT-IR, ¹H NMR, differential scanning calorimetry (DSC), gel permeation chromatography (GPC), optical microscopy, and mechanical testing. The results demonstrated that all factors significantly impacted the number-average molecular weight (M_n) as determined by GPC. Furthermore, the statistical design revealed crucial interaction effects between factors, such as a dependence between reaction time and temperature. For example, a fixed reaction time of 1 h, with the temperature varying from 50 °C to 61° C, did not significantly alter M_n. Better reaction conditions yielded high M_n (average: 162,000 g/mol), desirable mechanical properties (elongation at break > 1000%), low levels of unreacted HOPCLOH in the PEU films (OH/ESTER response = 0.0008), and reduced crystallinity (ΔH_m = 11 J/g) in the soft segment, as observed by DSC and optical microscopy. In contrast, suboptimal conditions resulted in low M_n, brittle materials with unmeasurable mechanical properties, high crystallinity, and significant amounts of residual HOPCLOH. The best experimental conditions were 61 °C, 0.176 molal, 8 h, and chloroform as the solvent (ε = 4.8). Full article

Hydraulic structures are frequently subjected to soft-water or acidic environments, necessitating serious consideration of the long-term effects of calcium leaching on the durability of concrete structures. Three types of common Portland cement (ordinary Portland cement, moderate-heat cement, and low-heat cement) paste samples widely applied to hydraulic concrete were immersed in a 6 mol/L NH₄Cl solution to simulate accelerated calcium leaching behavior. The mass loss, porosity, leaching depth, compressive strength, and Ca/Si ratio of the three types of pastes were measured at different immersion stages (0, 14, 28, 56, 91, 140, and 180 days). The Vickers hardness index was employed to compare cement samples subjected to erosion for 30 and 180 days. The microstructure and composition of the mineralogical phases of the leached samples were also determined by X-ray diffraction, thermogravimetric analysis, and scanning electronic microscopy. Accordingly, the time-varying behavior and deterioration mechanism of the different cements subjected to leaching were contrastively revealed. The results showed that the calcium leaching resistance of the low-heat cement was the best, followed by the moderate-heat cement and ordinary Portland cement, proving that the content and structure of Ca(OH)₂ and C-S-H gels were closely related to the leaching performance of the cement. The less Ca(OH)₂ and more aggregated C-H-S gels produced by C₂S led to better calcium leaching resistance in the cement. Therefore, the leaching performance of Portland cement could be effectively improved by reducing the content of C₃S and increasing the content of C₂S, and the dissolution rate of calcium ions under leaching could be reduced by controlling the low initial calcium content in cementitious materials. This paper offers theoretical guidance for mitigating the long-term effects of calcium leaching on hydraulic concrete structures by conducting a comprehensive comparative analysis of the damage behavior and deterioration mechanisms of various types of Portland cement under identical erosion conditions. Full article

Spinal cord trauma leads to the destruction of the highly organized cytoarchitecture that carries information along the axis of the spinal column. Currently, there are no clinically accepted strategies that can help regenerate severed axons after spinal cord injury (SCI). Hydrogels are soft biomaterials with high water content that are widely used as scaffolds to interface with the central nervous system (CNS). Here, we examine a simple and reproducible method that results in consistently aligned fibrils within 3D matrices using thermally gelling biomimetic polymers. A collagen type I (Col)-based thermally gelling hydrogel system was used in combination with two other native extracellular matrix proteins: laminin I (LN) and hyaluronic acid (HA). Gelling kinetics for all gel types (Col, Col LN, Col HA) showed that at 37 °C, all three hydrogels formed gels consistently. A method of aspiration and ejection was used to produce Col-based hydrogels containing aligned fibrils. In vitro, embryonic spinal cord neurons survived and produced processes aligned to collagen fibrils. Next, we implanted either non-aligned or aligned hydrogels after a bilateral dorsal hemisection of the thoracic spinal cord at T7/T8. Pan neuronal antibody-positive fibrils were found within all implants; aligned hydrogels supported neurite growth along the parallel direction of the implanted hydrogels. Combined, our in vitro and in vivo data indicate that thermally gelling biomimetic hydrogels can produce aligned matrices through a method of aspiration and ejection, and this presents a novel platform for regenerative therapies for the CNS. Full article

In response to the growing demand for high-quality food ingredients, starches from underutilised sources like quinoa and faba bean are gaining attention due to their unique properties and high tolerance to adverse environmental conditions. Acid hydrolysis is a well-established chemical method for producing modified starch with improved solubility, lower gelatinisation temperature, and reduced pasting viscosity. However, various outcomes can be achieved depending on the type of starch and modification conditions. This study comparatively investigated the effects of acid hydrolysis on the functional and physicochemical properties of emerging starches from quinoa and faba bean, with cassava starch serving as a reference from a leading source. The results demonstrated increased dietary fibre content across all three starches, with faba bean starch showing the most significant rise. Acid treatment also enhanced the crystallinity of the starches, with faba bean starch exhibiting the highest increase in relative crystallinity, which led to a shift towards higher temperatures in their thermal properties. Additionally, water solubility and oil adsorption capacity increased, while swelling power decreased following acid treatment. The acid treatment reduced the pasting properties of all samples, indicating that the modified starches were more resistant to heating and shearing in the rapid visco analyser. While quinoa starch gel remained soft after acid hydrolysis, the gel strength of cassava and faba bean starches improved significantly, making them suitable as plant-based gelling agents. Full article

Soft matter electrolytes could solve the safety problem of widely used liquid electrolytes in Li-ion batteries which are burnable upon heating. Simultaneously, they could solve the problem of poor contact between electrodes and solid electrolytes. However, the ionic conductivity of soft matter electrolytes is relatively low when mechanical properties are relatively good. In the present review, mechanisms of ionic conduction in soft matter electrolytes are discussed in order to achieve higher ionic conductivity with sufficient mechanical properties where soft matter electrolytes are defined as polymer electrolytes and polymeric or inorganic gel electrolytes. They could also be defined by Young’s modulus from about ${10}^5$ Pa to ${10}^9$ Pa. Many soft matter electrolytes exhibit VFT (Vogel–Fulcher–Tammann) type temperature dependence of ionic conductivity. VFT behavior is explained by the free volume model or the configurational entropy model, which is discussed in detail. Mostly, the amorphous phase of polymer is a better ionic conductor compared to the crystalline phase. There are, however, some experimental and theoretical reports that the crystalline phase is a better ionic conductor. Some methods to increase the ionic conductivity of polymer electrolytes are discussed, such as cavitation under tensile deformation and the microporous structure of polymer electrolytes, which could be explained by the conduction mechanism of soft matter electrolytes. Full article

Constructing tissue/organ analogs with natural structures and cell types in vitro offers a valuable strategy for the in situ repair of damaged tissues/organs. Three-dimensional (3D) bioprinting is a flexible method for fabricating these analogs. However, extrusion-based 3D bioprinting faces the challenge of balancing the use of soft bioinks with the need for high-fidelity geometric shapes. To address these challenges, recent advancements have introduced various suspension mediums based on gelatin, agarose, and gellan gum microgels. The emergence of these gel-based suspension mediums has significantly advanced the fabrication of tissue/organ constructs using 3D bioprinting. They effectively stabilize and support soft bioinks, enabling the formation of complex spatial geometries. Moreover, they provide a stable, cell-friendly environment that maximizes cell viability during the printing process. This minireview will summarize the properties, preparation methods, and potential applications of gel-based suspension mediums in constructing tissue/organ analogs, while also addressing current challenges and providing an outlook on the future of 3D bioprinting. Full article

Non-invasive transcranial electrical stimulation is a category of neuromodulation techniques used for various disorders. Although medically approved devices exist, the variety of consumer electrical stimulation devices is increasing. Because clinical trials and animal tests are costly and risky, using a brain phantom can provide preliminary experimental validation. However, existing brain phantoms are often costly or require excessive preparation time, precluding their use for rapid, real-time optimization of stimulation settings. A limitation of direct electric fields in a phantom is the lack of 3D spatial resolution. Using well-researched modalities such as transcranial direct current stimulation (tDCS) and newer modalities such as amplitude-modulated transcranial pulsed-current stimulation (am-tPCS), a range of materials was tested for use as electrical phantoms. Based on cost, preparation time, and efficiency, ground beef and agar gel with a 10% salt mix were selected. The measured values for the total dosages were 0.55 W-s for am-tPCS and 0.91 W-s for tDCS. Due to a low gain on the recording electrodes, the signal efficiency measured against the power delivered was 4.2% for tDCS and 3.1% for am-tPCS. Issues included electrodes shifting in the soft material and the low sensitivity of the recording electrodes. Despite these issues, the effective combination of the phantom and recording methodologies can enable low costs and the rapid testing, experimentation, and verification of consumer neuromodulation devices in three dimensions. Additionally, the efficiency factors (EFs) between the observed dosage and the delivered dosage could streamline the comparison of experimental configurations. As demonstrated by comparing two types of electrical neuromodulation devices across the 3D space of a phantom, EFs can be used in conjunction with a cost-effective, time-expedient phantom to rapidly iterate and optimize stimulation parameters. Full article

There is a need to reduce the proportion of animal-derived food products in the human diet for sustainability and environmental reasons. However, it is also important that a transition away from animal-derived foods does not lead to any adverse nutritional effects. In this study, the potential of blending whey protein isolate (WPI) with either shiitake mushroom (SM) or oyster mushroom (OM) to create hybrid foods with enhanced nutritional and physicochemical properties was investigated. The impact of OM or SM addition on the formation, microstructure, and physicochemical attributes of heat-set whey protein gels was therefore examined. The mushroom powders were used because they have relatively high levels of vitamins, minerals, phytochemicals, and dietary fibers, which may provide nutritional benefits, whereas the WPI was used to provide protein and good thermal gelation properties. A variety of analytical methods were used to characterize the structural and physicochemical properties of the WPI-mushroom hybrids, including confocal microscopy, particle electrophoresis, light scattering, proximate analysis, differential scanning calorimetry, thermogravimetric analysis, dynamic shear rheology, textural profile analysis, and colorimetry. The charge on whey proteins and mushroom particles went from positive to negative when the pH was raised from 3 to 9, but whey protein had a higher isoelectric point and charge magnitude. OM slightly increased the thermal stability of WPI, but SM had little effect. Both mushroom types decreased the lightness and increased the brownness of the whey protein gels. The addition of the mushroom powders also decreased the hardness and Young’s modulus of the whey protein gels, which may be because the mushroom particles acted as soft fillers. This study provides valuable insights into the formation of hybrid whey protein-mushroom products that have desirable physiochemical and nutritional attributes. Full article

In order to overcome the problems of the high economic and environmental costs of a traditional ordinary portland cement-based binder, this study used self-combusted coal gangue (SCCG), granulated blast furnace slag (GBFS) and phosphorous slag (PS) to prepare a novel SCCG-GBFS-PS (SGP) ternary alkali-activated binder for solidifying silty soft clay (SC). Firstly, the parameters of the SGP ternary binder were optimized using orthogonal experiments. Then the effects of the SGP ternary binder content (mass ratio of the SGP ternary binder and the SGP-solidified soil), initial water content of SC (mass ratio of SC’ water and SC) and types of additives on the unconfined compressive strength (UCS) of the SGP-solidified soil were analyzed. Finally, the hydration products and microstructure of the SGP-solidified soil were analyzed to investigate the solidification mechanism of the SGP ternary binder. The results showed that the optimal mass ratio of GBFS and PS is 2:1, and the optimal alkali activator content (mass ratio of Na₂O and the SGP ternary binder) and modulus of alkali activator (molar ratio of SiO₂ and Na₂O of alkali activator) were 13% and 1.3, respectively. When the SGP ternary binder content was 16% and the initial water content of SC was 35%, the SGP-solidified soil met the requirement of UCS for tertiary cured soil. The incorporation of triethanolamine and polyvinyl alcohol improved the UCS, while the incorporation of Na₂SO₄ significantly deteriorated the UCS of the SGP-solidified soil. The C-S-H gels and C(N)-A-S-H gels generated by hydration of the SGP-solidified soil were interspersed, interwoven and adhered to each other to form a network-like space structure that played the roles of skeleton, bonding soil particles and filling pores, which improved the macroscopic properties of the SGP-solidified soil. The results of this study provide a reference for the design and development of a solid waste-based binder for solidifying SC. Full article

In silicon carbide processing, the surface and subsurface damage caused by fixed abrasive grinding significantly affects the allowance of the next polishing process. A novel grinding wheel with a soft and hard composite structure was fabricated for the ultra-precision processing of SiC substrates, and the grinding performance of the grinding wheel was assessed in this study. Different types of gels, heating temperatures, and composition ratios were used to fabricate the grinding wheel. The grinding performance of the grinding wheel was investigated based on the surface integrity and subsurface damage of SiC substrates. The results showed that the grinding wheel with a soft and hard composite structure was successfully fabricated using freeze-dried gel with a heating temperature of 110 °C, and the component ratio of resin to gel was 4:6. A smooth SiC substrate surface with almost no cracks was obtained after processing with the grinding wheel. The abrasive exposure height was controlled by manipulating the type and ratio of the gel. Furthermore, the cutting depth in nanoscale could be achieved by controlling the abrasive exposure height. Therefore, the fabrication and application of the grinding wheels with soft and hard composite structures is important for the ultra-precision processing of large-size SiC substrates. Full article