Search Results (10)

Femtosecond (fs) laser technology is currently being considered in innovative fields such as osteotomy and treatment of hard tissue thanks to the achievable high resolution and ability to prevent tissue damage. In a previous study, suitable process parameters were obtained to achieve competitive ablation rates on pork femur processing. Nevertheless, a better control of thermal accumulation in the tissue during laser ablation could further improve the postoperative regeneration of the treated bone compared with conventional procedures and push forward the exploitation of such technology. This study presents methods for real time analyses of bone tissue temperature and composition during fs laser ablation and highlights the importance of implementing an efficient cooling method of bone tissue in order to achieve optimized results. Results show that it is possible to achieve a larger process window for bone tissue ablation where bone tissue temperature remains within the protein denaturation temperature in water-based processing environment. This is a key outcome towards a clinical exploitation of the presented technology, where higher process throughputs are necessary. The effects of process parameters and environments on bone tissue were confirmed by LIBS technique, which proved to be an efficient method by which to record real-time variation of bone tissue composition during laser irradiation. Full article

Laser ablation of a bulk graphite target in water using femtosecond laser pulses (pulse width ≤ 190 fs) was performed to investigate the synthesis of polyynes and carbon-based nanomaterials and compare them with the well-studied cases of longer pulse (picosecond or nanosecond) ablations. The laser ablation products were characterized using UV-vis absorption spectroscopy, Raman spectroscopy, X-ray diffraction, and transmission electron microscopy, whereas the induced plasma plumes were characterized using laser-induced breakdown spectroscopy. Carbon-based nanomaterials and short-chain polyynes (C₆H₂ and C₈H₂) are formed in the solutions as proven by their characteristic absorption band at ~262 nm and peaks in the region of 190–240 nm as well as at around 2100 cm⁻¹ in the Raman spectra, respectively. Polyynes (C₈H₂) are present in the solutions that are produced under an ablation that is carried out in two intervals with a short pause between them, which is contrary to a continuous ablation that is performed for the same total time duration. The ablation products have a hexagonal graphite crystal structure. The carbon-based nanomaterials consist of large non-spherical and small spherical nanoparticles as well as sheet-like structures. The results of the study were compared with previous studies and discussed based on those studies. Full article

Femtosecond laser-induced fluorescence (FLIF) and femtosecond laser-induced optical breakdown spectroscopy (FIBS) are important tools for remote diagnostics of atmospheric aerosols using LiDAR (Light Identification Detection and Ranging) technology. They are based on light emission excitation in disperse media via multiphoton nonlinear processes in aerosol particles induced by high-power optical pulses. To date, the main challenge restraining the large-scale application of FLIF and FIBS in atmospheric studies is the lack of a valued theory of the stimulated light emission in liquid microparticles with a sufficiently broad range of sizes. In this paper, we fill this gap and present a theoretical model of dye water droplet emission under high intensity laser exposure that adequately simulates the processes of multiphoton excited fluorescence and optical breakdown plasma emission in microparticles and gives quantitative estimates of the angular and power characteristics of nonlinear emission. The model is based on the numerical solution to the inhomogeneous Helmholtz equations for stimulating (primary) and nonlinear (secondary) waves provided by the random nature of molecule emission in particles. We show that droplet fluorescence stimulated by multiphoton absorption generally becomes more intense with increasing particle size. Moreover, far-field plasma emission from liquid particles demonstrates a larger angular diversity when changing the droplet radius in comparison with multiphoton excited fluorescence, which is mainly due to the excitation of the internal optical field resonances in spherical particles. Full article

Femtosecond (fs) and nanosecond (ns) laser pulses have their own advantages and disadvantages in laser-induced breakdown spectroscopy (LIBS). This paper investigated fs + ns (FN) dual-pulse (DP) LIBS, utilizing the respective advantages of two laser pulses in LIBS. Compared to traditional single ns LIBS, applying a smaller energy fs pulse could effectively improve the LIBS emission. Firstly, this study discussed the spectra of FN DP LIBS with overlapping pulse time—that is, the FN DP inter-pulse delay (DID) was 0 μs. The results showed that the spectra were increased to three times that of a single ns LIBS. Subsequently, the DID between the two pulses was optimized. The results showed that as the DID between the two pulses increased, the spectral emission first increased and then decreased, ultimately remaining unchanged. The optimized DID was approximately 2 μs. Finally, using this optimized DID, the variation of spectral intensity with ns laser energy was discussed in DP LIBS. The spectral enhancement ratio increased from 3 with 0 μs DID to 6 with 2 μs DID. The investigation provides a reference in the application of FN DP LIBS element analysis. Full article

Introduction: The purpose of this study is to investigate and compare the effects of the antimicrobial agents Moringa oleifera and bioactive glass nanoparticles activated by femtosecond laser light on the biomimetic dentin remineralization using teeth having carious dentin ICDAS code 3. Methods and Materials: A total of 27 dentin surface samples were divided into three groups: the first group was treated with a Moringa oleifera extract, while the second group was treated with bioactive glass nanoparticles, and as for the control group, the third group received no additional agent. All groups were subjected to femtosecond laser light at three different wavelengths: 390 nm, 445 nm, and 780 nm. The photoactivation of each sample was achieved using the femtosecond laser light for 5 min with an average power rating of 300 mW, a pulse duration of 100 fs, and a pulse repetition rate of 80 Hz. The mineral content of the samples was obtained and analyzed using the laser-induced breakdown spectroscopy (LIBS). The LIBS analysis was conducted with the following laser light parameters: average power of ~215 mW, wavelength of 532 nm, pulse duration of 10 ns, and a pulse repetition rate of 10 Hz. Results: Most studied samples exhibited a relative increase in the mineral content that may enhance biomimetic remineralization. Moringa oleifera photoactivated by femtosecond laser light at 445 nm achieved a significant increase in mineral content. Conclusion: Using the femtosecond laser light to activate the relatively cheap and commercially available antimicrobial agent Moringa oleifera supports the strategy of minimal invasive approaches for the treatment and biomimetic remineralization of carious dentin ICDAS code 3. Full article

We study the capability of nanosecond laser-induced breakdown spectroscopy (ns-LIBS) for depth-resolved concentration measurements of Li-Ion battery cathodes. With our system, which is optimized for quality control applications in the production line, we pursue the goal to unveil manufacturing faults and irregularities during the production process of cathodes as early as possible. Femtosecond laser-induced breakdown spectroscopy (fs-LIBS) is widely considered to be better suited for depth-resolved element analysis. Nevertheless, the small size and intensity of the plasma plume, non-thermal energy distribution in the plasma and high investment costs of fs-LIBS make ns-LIBS more attractive for inline application in the industrial surrounding. The system, presented here for the first time, is able to record quasi-depth-resolved relative concentration profiles for carbon, nickel, manganese, cobalt, lithium and aluminum which are the typical elements used in the binder/conductive additive, the active cathode material and the current collector. LIBS often causes high variations in signal intensity from pulse to pulse, so concentration determination is, in general, conducted on the average of many pulses. We show that the spot-to-spot variations we measure are governed by the microstructure of the cathode foil and are not an expression of the limited precision of the LIBS setup. Full article

Femtosecond filament-induced breakdown spectroscopy (FIBS) is an efficient approach in remote and in situ detection of a variety of trace elements, but it was recently discovered that the FIBS of water is strongly dependent on the large-bandgap semiconductor property of water, making the FIBS signals sensitive to laser ionization mechanisms. Here, we show that the sensitivity of the FIBS technique in monitoring metal elements in water can be efficiently improved by using chirped femtosecond laser pulses, but an asymmetric enhancement of the FIBS intensity is observed for the negatively and positively chirped pulses. We attribute the asymmetric enhancement to their different ionization rates of water, in which the energy of the photons participating in the ionization process in the front part of the negatively chirped pulse is higher than that in the positively chirped pulse. By optimizing the pulse chirp, we show that the limit of detection of the FIBS technique for metal elements in water, e.g., aluminum, can reach to the sub-ppm level, which is about one order of magnitude better than that by the transform-limited pulse. We further examine the FIBS spectra of several representative water samples including commercial mineral water, tap water, and lake water taken from two different environmental zones, i.e., a national park and a downtown business district (Changchun, China), from which remarkably different concentrations of Ca, Na, and K elements of these samples are obtained. Our results provide a possibility of using FIBS for direct and fast metal elemental analysis of water in different field environments. Full article

Femtosecond laser ablation spark-induced breakdown spectroscopy (fs LA-SIBS) was developed to quantitatively analyze vanadium, molybdenum, chromium, manganese, aluminum, nickel, and copper in a steel alloy. In the experiment, a femtosecond laser operating at a repetition rate of 1 kHz was used as the laser ablation source, and spark discharge was utilized to re-excite the plasma and enhance the atomic intensity. A compact fiber spectrometer was used to record and analyze the plasma emission spectra in a nongated signal-recording mode. The calibration curves of V, Mo, Cr, Mn, Al, Ni, and Cu elements in steel alloy samples were established, and the detection limits of these elements were determined to be 10.9, 12.6, 4.0, 5.7, 8.7, 7.9, and 3.1 ppm with fs LA-SIBS, respectively, which were 4–12-fold better than those achieved with femtosecond laser-induced breakdown spectroscopy (fs LIBS). Compared with conventional LIBS, the fs LA-SIBS technique provided a rapid and high spatial resolution approach to quantitative elemental analysis, with better analytical sensitivity. Full article

The applications of femtosecond lasers to the diagnostics of combustion and flow field have recently attracted increasing interest. Many novel spectroscopic methods have been developed in obtaining non-intrusive measurements of temperature, velocity, and species concentrations with unprecedented possibilities. In this paper, several applications of femtosecond-laser-based incoherent techniques in the field of combustion diagnostics were reviewed, including two-photon femtosecond laser-induced fluorescence (fs-TPLIF), femtosecond laser-induced breakdown spectroscopy (fs-LIBS), filament-induced nonlinear spectroscopy (FINS), femtosecond laser-induced plasma spectroscopy (FLIPS), femtosecond laser electronic excitation tagging velocimetry (FLEET), femtosecond laser-induced cyano chemiluminescence (FLICC), and filamentary anemometry using femtosecond laser-extended electric discharge (FALED). Furthermore, prospects of the femtosecond-laser-based combustion diagnostic techniques in the future were analyzed and discussed to provide a reference for the relevant researchers. Full article

The development of underwater robotics sensitivity, which is based on the sensors of laser spectroscopy methods, have been discussed. The ways to improve Laser Induced Fluorescence (LIF) and Laser Induced Breakdown Spectroscopy (LIBS) methods were investigated in order to develop and create laser sensitivity for underwater robotics. A brief overview is done in the article, where LIF and LIBS spectroscopy in underwater robotics are used as spectroscopy sensors in order to investigate underwater environments by means of underwater vehicles. Limit of Detection (LoD) of oil and oil product solutions in the seawater have been detected by means of nanosecond and femtosecond spectroscopy LIF. All results, which had been received by laser pulses of different duration, were compared. The same experiments have been provided in order to measure concentrations of elements in the seawater and solutions by the LIBS method. It was discovered that the LoD of a group of elements was reduced when the femtosecond LIBS was used. Anthropomorphic complexes were under discussion in order to adopt laser spectroscopy sensors for underwater environments. The submersible module, which was constructed to investigate and examine laser spectroscopy sensors, has been described. Full article