Search Results (143)

Objectives: Facial soft tissue imaging is crucial in orthodontic treatment planning, and the structured light scanning technology found in the latest iPhone models constitutes a promising method. Currently, studies which evaluate the accuracy of smartphone-based three-dimensional (3D) facial scanners are scarce. This study compares smartphone scans with cone-beam computed tomography (CBCT) images. Materials and Methods: Three-dimensional images of 23 screened patients were captured with the camera of an iPhone 13 Pro Max and processed with the Scandy Pro application; CBCT scans were also taken as a standard of care. After establishing unique image pairs of the same patient, linear and angular measurements were compared between the images to assess the scanner’s two-dimensional trueness. Following the co-registration of the virtual models, a heat map was generated, and root mean square (RMS) deviations were calculated for quantitative assessment of 3D trueness. Precision was determined by comparing consecutive 3D facial scans of five participants, while intraobserver reliability was assessed by repeating measurements on five subjects after a two-week interval. Results: This study found no significant difference in soft tissue measurements between smartphone and CBCT images (p > 0.05). The mean absolute difference was 1.43 mm for the linear and 3.16° for the angular measurements. The mean RMS value was 1.47 mm. Intraobserver reliability and scanner precision were assessed, and the Intraclass Correlation Coefficients were found to be excellent. Conclusions: Smartphone facial scanners offer an accurate and reliable alternative to stereophotogrammetry systems, though clinicians should exercise caution when examining the lateral sections of those images due to inherent inaccuracies. Full article

Background: The Da Silva Cone procedure for Ebstein anomaly has dramatically improved tricuspid valve competence and clinical outcomes. However, preoperative left ventricular (LV) dysfunction and immediate postoperative right ventricular (RV) systolic dysfunction are frequently observed. While excellent valve outcomes are well established, recovery of biventricular function following the Cone remains less defined. This study aimed to evaluate longitudinal changes in RV and LV function postoperatively and over a minimum of six months post-Cone operation. Methods: A single center retrospective review of 134 patients who underwent Cone repair for Ebstein’s anomaly from 2016 to 2024 was performed. Echocardiograms were analyzed at three time points: preoperative (Time 1), hospital discharge (Time 2), and ≥6 months postoperative (Time 3). RV parameters included fractional area change (FAC), tricuspid annular plane systolic excursion (TAPSE), and tricuspid S′. LV parameters included left ventricular ejection fraction (LVEF), end-diastolic volume indexed to body surface area (LVEDVi), left ventricular stroke volume (LVSVi), and mitral E/E′. Subgroup analyses examined outcomes by prior Glenn, Starnes procedure, and degree of RV dilation. Paired two sample t-tests were used to compare serial measures. Results: Median age at surgery was 7.8 years (IQR: 2.3–17.7). All patients had discharge echocardiograms; 70 had follow-up studies at ≥6 months. RV function declined postoperatively with reductions in FAC (35% to 21%), TAPSE (2.0 to 0.8 cm), and S′ (13 to 5 cm/s), all p < 0.001. By Time 3, these measures improved (FAC to 29%, TAPSE to 1.3 cm, S′ to 7 cm/s) but did not fully return to baseline. LVEDVi and LVSVi increased significantly by Time 3 (LVEDVi: 47 to 54 mL/m²; LVSVi: 30 to 34 mL/m²; p < 0.001), while LVEF remained unchanged. Patients with prior Glenn or Starnes had greater Time 1 LV volumes and lower RV function, but by Time 3, most differences resolved. Moderate–severe preoperative RV dilation was associated with worse RV function at Time 2 and normalized by Time 3. Conclusions: The Da Silva Cone procedure leads to early postoperative RV dysfunction with partial recovery over the mid-term follow-up. Concurrently, LV filling and stroke volume improve, reflecting favorable interventricular interaction. These findings support echocardiographic surveillance to guide functional recovery post-Cone and inform patient counseling. Full article

Background/Objectives. With a rapid palatal expander (RPE) is reported to be effective in increasing the volume of nasal cavities, with a restoration of physiological nasal airflow. The purpose of this retrospective clinical study was to evaluate, using Cone Beam Computed Tomography (CBCT), the volumetric changes and airflow velocity changes in the nasal cavities, retro-palatal and retro-glossal airways, resulting from the use of RPE with dental anchorage (group A), also comparing these data with patients non treated with RPE (group B). Methods. Sixteen subjects (aged 9.34 years) with transverse maxillary deficiency and unilateral posterior crossbite were treated with RPE with dental anchorage. Additionally, 8 patients (aged 11.11 years) with juvenile idiopathic arthritis, who did not undergo any orthodontic treatment, were selected as a control group. Expansion was performed until overcorrection was achieved, and the device was left in place for 6 months as fixed retention, followed by another 6 months of night-time removable retention. From the retrospective evaluation, all patients presented two CBCT scans at baseline (T0) and 1-year follow-up (T1). The 3D-Slicer software was used for each CBCT to measure the nasal (VN), retropalatal (VRP), and retroglossal (VRG) volumes, while an iterative Excel spreadsheet allowed for a pilot approximated modeling and calculation of airway flow-related data. Results. Regarding mean age, a statistically significant difference (p = 0.01 *) was found between groups, suggesting that group B is closer to the pubertal growth peak. Analysis between T0 and T1 revealed: (i) a statistically significant increase for volumes VN, VRP and VRG in group A; (ii) a statistically significant increase for VN in group B; (iii) a statistically significant decrease for all variables related to airflow velocity in both groups. Furthermore, comparison between group A and B, regarding variations between T0 and T1, found a statistically significant difference only for VN. Conclusions. Within the limitations of this pilot evaluation, the treatment with RPE revealed promising outcomes for retro-palatal, retro-glossal and nasal volumes, together with clinical changes in airflow velocities. Full article

Incremental sheet forming originated as an excellent alternative to conventional forming techniques for incrementally deforming flat metal sheets into complex three-dimensional profiles. Recently, its use has been extended to polymers and composites. Among these, the use of natural fiber-reinforced composites is increasing considerably compared to synthetic fiber-reinforced composites, due to the availability and unique properties of natural fibers in polymer applications. One of the dominant thermoplastics used as a matrix is polypropylene. This experimental study focuses on the incremental forming of natural fiber-reinforced polypropylene composites. Cones and spherical caps were manufactured from composite laminates of polypropylene reinforced with hemp and flax long-fiber fabrics. The formability limits, observed through failures and defects, as well as the forming forces, power, and energy consumption, were investigated to examine the feasibility of incremental forming applied to these composite materials; based on the results obtained, it is possible to say that the process can manufacture components with not very high wall angles but under low load conditions and allowing to limit the energy impact. Full article

PA66 is a widely used engineering plastic, but its flammability reduces safety during application. The 9,10-dihydro-9-oxa-10-phosphaphenanthrene 10-oxide (DOPO) and its derivatives are a class of flame retardants with excellent flame-retardant efficiency, which can significantly improve the flame retardancy of PA66. This work synthesized a DOPO derivative flame retardant, DT, containing multiple P/N elements and comprehensively characterized its structure using FTIR and NMR. Flame-retardant PA66 materials were prepared by twin-screw extrusion blending with PA66, and their thermal stability, crystallization properties, flame retardancy, and mechanical properties were investigated. When the DT content reached 15%, the vertical burning classification test achieved the UL-94 V-0, and the limiting oxygen index (LOI) rose up 27.2%. In the cone calorimeter test, the peak of heat release rate (PHRR) and total heat release (THR) of the material decreased significantly, and a distinct char layer formed, increasing NH₃ release and decreasing the C-H structure after combustion, improving PA66 flame-retardant properties. Full article

Superhydrophobic surfaces with a low liquid–solid contact time have huge application prospects in anti-icing, corrosion-resistant, self-cleaning, etc. Significant attempts have been devoted to reducing the contact time through altering the hydrodynamics of the process through which the droplet contacts the superhydrophobic surface. However, these works are rarely considered to be related to the influence of environmental conditions (e.g., the pH of the droplet, salinity of the droplet, droplet viscosity, and supercooled droplet impact). Here, we report various superhydrophobic cone arrays (SCAs) with low droplet impact contact times under various conditions (pH of the droplet, salinity of the droplet, droplet viscosity, droplet temperature, etc.). We demonstrate that the low contact time of the droplet impacting cone-arrays can be optimized via the critical Weber number, pillar-to-pillar spacing, and pillar height (e.g., 11.1, 350 μm, and 300 μm, respectively). The lowest droplet contact time of ~6 ms, which is reduced by more than 60% compared to conventional bouncing, can be achieved. In addition, directional pancake bouncing behaviors can achieve the largest horizontal displacement (85% of the droplet size, ~3 mm) on a tilted SCA with optimal tilt angles. These findings offer insights into the interface effect for controlling wetting that would extend the practical applications, e.g., liquid repellency, anti-corrosion, anti-icing, heat transfer, etc. Full article

Cellulose, as a green and renewable polymer material, has attracted the attention of a wide range of scholars for its excellent mechanical strength, easy chemical modification and degradability. However, its flammability limits its application in automotive, aerospace, construction, textile and electronic fields. This review recapitulates the modification methods of flame-retardant cellulose and their applications in polymers in recent years. This paper discusses the fabrication of flame-retardant cellulose from various aspects such as boron, nitrogen, phosphorus, sulphur, inorganic and heterogeneous synergistic modification, respectively, and evaluates the flame retardancy of flame-retardant cellulose by means of thermogravimetry, cone calorimetry, limiting oxygen index, the vertical combustion of UL94, etc. Finally, it discusses the application of flame-retardant cellulose in actual composites, which fully reflects the extraordinary potential of flame-retardant cellulose for applications in polymers. Currently, flame-retardant cellulose has significantly improved its flame-retardant properties through multi-faceted modification strategies and has shown a broad application prospect in composite materials. However, interfacial compatibility, environmental protection and process optimisation are still the key directions for future research, and efficient, low-toxic and industrialised flame-retardant cellulose materials need to be realised through innovative design. Full article

Three-dimensional (3D) visual perception is pivotal for understanding surrounding environments in applications such as autonomous driving and mobile robotics. While LiDAR-based models dominate due to accurate depth sensing, their cost and sparse outputs have driven interest in camera-based systems. However, challenges like cross-domain degradation and depth estimation inaccuracies persist. This paper introduces BEVCAM3D, a unified bird’s-eye view (BEV) architecture that fuses monocular cameras and LiDAR point clouds to overcome single-sensor limitations. BEVCAM3D integrates a deformable cross-modality attention module for feature alignment and a fast ground segmentation algorithm to reduce computational overhead by 40%. Evaluated on the nuScenes dataset, BEVCAM3D achieves state-of-the-art performance, with a 73.9% mAP and a 76.2% NDS, outperforming existing LiDAR-camera fusion methods like SparseFusion (72.0% mAP) and IS-Fusion (73.0% mAP). Notably, it excels in detecting pedestrians (91.0% AP) and traffic cones (89.9% AP), addressing the class imbalance in autonomous driving scenarios. The framework supports real-time inference at 11.2 FPS with an EfficientDet-B3 backbone and demonstrates robustness under low-light conditions (62.3% nighttime mAP). Full article

The steady smoldering of rod-shaped fuels, a traditional Chinese disinfection and pest control technique, presents unique challenges in theoretical modeling. Conventional analytical approaches based on energy and mass conservation equations form an underdetermined system, failing to uniquely resolve three critical parameters: temperature field, char morphology, and propagation velocity. This study establishes a quantitative relationship between smoldering propagation velocity and smoke schlieren thickness through integrated experimental and theoretical methodologies. Systematic experiments were conducted on vertically oriented fuel rods (upward and downward configurations), measuring propagation velocity, char cone geometries, and schlieren photographs. By incorporating surface oxidation kinetics and oxygen transport mechanisms into a theoretical model, we revealed an inverse proportionality between propagation velocity and schlieren thickness, thereby introducing a third constraint to resolve the system. Comparative analysis demonstrated excellent agreement between calculated and measured velocities for downward smoldering, with deviations below 20% for biomass rods and 60% for commercial incense rods. Significant discrepancies in upward smoldering were attributed to smoke plume entrainment effects. This work enhances the mechanistic understanding of smoldering propagation dynamics in anisotropic fuel systems. Full article

To expand the utilization of bio-based materials as flame retardants in epoxy resin (EP), a green Schiff base structural material (CSV) was synthesized via a one-pot approach employing chitosan and vanillin as the raw materials. Then, the CSV combined with 9,10-dihydro-9-oxa-10-phospha-phenanthrene-10-oxide (DOPO) (the mass ratio between CSV and DOPO was 1:2, written as CSV-DOPO) improved the flame retardancy of the EP. When the amount of CSV−DOPO in the EP was only 3 wt%, the thermogravimetric analysis (TGA) results indicated that the residue of the EP composites was 50.6% higher than that of the EP. The combustion class of the EP/3 wt% CSV−DOPO composites achieved a UL-94 V0 rating and the limit oxygen index (LOI) reached 34.0%. The cone calorimeter test (CCT) showed that the peak heat release rate (PHHR), total heat release (THR), total smoke release (TSP), and peak carbon dioxide production (PCO₂P) of the EP/3 wt% CSV−DOPO composites decreased by 32.3%, 22.0%, 4.6%, and 51.0%, respectively, compared to the EP. The flame-retardancy mechanism was studied by scanning electron microscopy (SEM) and Raman spectra. The quenching effect of phosphorus-containing radicals, the dilution effect of noncombustible gases, and the impeding effect of the carbon layer in the condensed phase contributed collectively to the excellent flame retardancy of the EP/CSV−DOPO composites. Considering the facile preparation method and small addition amount of the flame retardant, the present work provides a convenient solution for the preparation of modified EP with good flame retardancy and heat stability, which is expected to be widely used in industries. Full article

The retinal structure is generally conserved across vertebrates; however, variations occur due to the relationship between environmental factors and visual perception. Birds have adapted to diverse ecological contexts, evolving specialized visual characteristics. In this study, we examined the retina of Audouin’s Gull (Larus audouinii) using light and transmission electron microscopy. This species is particularly intriguing as it is considered an outlier within the Laridae family: despite being a diurnal bird, it exhibits nocturnal/crepuscular foraging behaviour. Our analysis revealed a retina well adapted for diurnal activity, with features such as a retinal thickness comparable to that of other diurnal birds, a well-developed retinal pigment epithelium, and a high cone-to-rod density ratio. However, we also observed characteristics aligned with nocturnal or crepuscular activity, including a slightly increased rod density in central regions and the presence of two distinct types of horizontal cells in the inner nuclear layer. Additionally, the inner retina showed evidence of complex visual processing. These findings suggest that Audouin’s Gull is an excellent model for visual ecology studies due to its specialized adaptations. Full article

When rockbursts occur, hydraulic support is prone to impact failure, which leads to severe casualties and economic losses. To improve the performance of hydraulic support structures under impact loading, a grooved conical tube is designed as an energy absorption device to avoid hydraulic columns being destroyed. The performance of the grooved conical tube during deformation is studied using simulation, considering the wall thickness, cone angle and number of grooves. The equivalent axial load of the grooved conical tube component is derived by studying the energy dissipation path. And the grooved conical tube’s structure is optimized. The results show that the Y3-5-10 (cone angle: 3°; number of grooves: 5; wall thickness: 10 mm) grooved conical tube shows excellent performance among the twenty-seven types of structures. In addition, the equivalent axial load prediction formula for the grooved conical tube has a high prediction accuracy. Furthermore, after multi-objective optimization, the mean square error is decreased by 20.6%, and the effective energy absorption is increased by 6.0%, which is able to make the energy absorption process more stable. Compared with widely used corrugated square tubes, the effective deformation distance of the grooved conical tube is increased by 27.2%, and the effective energy absorption is increased by 37.1%. The grooved conical tube has advantages in its effective deformation distance and effective energy absorption. These results are expected to provide sufficient time for the opening of the support column’s relief valve and to enhance the impact resistance of the hydraulic support, which is highly important for the prevention of rockbursts. Full article

The materials traditionally used in the construction of flexible and rigid pavements in modern road infrastructure present challenges in achieving sustainable development goals. Advances in technology have introduced the use of different pavement material mixes, leading to the introduction of earth-based alternatives. These materials are environmentally friendly, cost-effective, recyclable, and offer excellent insulation properties. Stabilization of earth-based materials improves their mechanical properties, reducing road construction costs and increasing durability. The present study investigates the mechanical and durability properties of earth-based materials stabilized with various additives, including cement, lime, polymer, and biopolymer, over 28 and 56 days. Fresh properties are assessed using unit volume weight, flow table, air content, and fall cone tests, while hardened properties are assessed using flexural strength, compressive strength, and water absorption. Microstructural analysis is carried out using scanning electron microscopy (SEM) and X-ray diffraction (XRD). The cement-stabilized samples show improved strength and durability, with the 5% cement group showing a 67% increase in compressive strength over the control group and the 10% cement group showing over 200% higher compressive strength. These results suggest that stabilized earth-based materials could provide a cost-effective and sustainable alternative to conventional pavements for low-traffic roads. Full article

Objectives: This study aimed to investigate the fracture strength of a novel-designed Zirconia crown before and after access opening, and to evaluate the mode of fracture and the time needed for initial penetration through the crown. Methods: This study involved the design and testing of 60 zirconia crowns, divided into three groups (20 crowns each) to compare different structural designs. Group 1 (Control) used a conventional full zirconia crown. Group 2 (Novel Design) featured a zirconia crown with an impermeable ceramic-filled opening. Group 3 (Modified Novel Design) included a zirconia crown with a permeable composite-filled opening. Each crown was designed using CAD/CAM technology with digital and cone beam CT scans to locate the pulp chamber accurately. The crowns were tested in two experiments. Experiment (A): Ten crowns from each group underwent a fracture test. Experiment (B): Ten crowns per group underwent an access cavity penetration followed by a fracture test. Key variables assessed included fracture strength, penetration time, and failure mode for each crown design, both before and after access opening. Data were analyzed using SPSS, with a significance threshold of p < 0.05. Results: The highest value of fracture strength before initial penetration was recorded for zirconia porcelain crowns (760.2 ± 25.2 MPa), while the lowest value was recorded for zirconia composite crowns (652.4 ± 25.9 MPa). The least time for initial penetration was recorded for zirconia composite crowns (2.5 ± 0.8 s). The difference in failure mode among the crowns was significant (p < 0.05) before initial penetration. All zirconia composite crowns showed crown fracture and core cracked, while all full zirconia crowns showed crown fracture only. The difference in failure mode before and after penetration was only significant for zirconia composite crowns. Conclusions: The modified novel-design crown (zirconia composite) could be an excellent choice when placing new prosthesis, since the crown provides easy access and a predictable guide to the root canal system and has good resistance to fracture before and after performing root canal therapy (RCT). Full article

Precise dating of prehistoric volcanic eruptions is essential for reconstructing eruption sequences and assessing volcanic hazards. The timing of the onset and termination of volcanic activity in the Xilinhot volcanic field (XVF) has been a topic of debate for years. Volcanic eruptions in this area began during the Pliocene, with the K-Ar (Ar-Ar) method providing reliable ages for early formed volcanic rocks; however, this method is less effective for dating younger volcanic events that occurred since the Late Pleistocene. For younger volcanoes, sediments baked by volcanic materials, organic sediments, and silty mudstones entrapped in lava serve as excellent geological carriers for dating. In this study, suitable samples collected from the XVF were dated using ¹⁴C and optically stimulated luminescence (OSL) methods. The ¹⁴C ages obtained for the Gezishan volcano are ~6.8 cal. ka BP, while its OSL age is ~7.8 ka. The ages dated by these two methods, combined with volcano–sedimentary stratigraphic relationships and volcanic topography, confirm the Holocene eruptions of the Gezishan volcano, categorizing it as a broadly active volcano. The upper boundary age of the sandy loam layer beneath the Gezishan lava flow is ~15.5 ka, indicating that the south lava of the Gezishan effusion occurred later than the late stage of the Late Pleistocene. Additionally, the OSL ages of baked sediments at the bottom of the base surge deposits from a Maar-type volcano and aeolian sand interlayers within a Strombolian-type scoria cone in the study area are ~50 ka and ~60 ka, respectively, representing eruptions in the middle Late Pleistocene. These findings demonstrate that volcanic activity in the XVF remained vigorous during the Late Pleistocene to Holocene. This study provides significant insights for reconstructing the evolutionary history of Xilinhot volcanic activity and assessing regional volcanic hazards. Full article