Search Results (47)

We have developed a new bioanode based on a cascade of reactions catalyzed by two enzymes. A glassy carbon electrode is modified with β-glucosidase and glucose oxidase enzymes entrapped within an osmium redox polymer. Cellobiose, the fuel for the anode, is hydrolyzed by β-glucosidase (TxGH116), yielding two molecules of D-glucose. Glucose is then oxidized by glucose oxidase (GOx) into δ-gluconolactone and produces electrons that are transferred to the electrode mediated by osmium redox polymer. We investigated the kinetic parameters of both enzymes at different temperatures. For GOx, the effect of enzyme loading and enzyme/polymer ratio were also optimized. The proposed bioanode is coupled to a biocathode based on horseradish peroxidase (HRP) in which H₂O₂, the oxidant, is reduced. We investigated the performance of the biofuel cell on cellobiose and sugarcane hydrolysates subjected to different pretreatments. Alkaline pretreatments of biomass were found to be more effective than phosphoric acid pretreatment. Adding TxGH116 β-glucosidase further enhanced current generation, even when commercial cellulase was used. Full article

This study introduces an advanced strategy for improving microbial fuel cell (MFC) performance in hexavalent chromium (Cr(VI)) wastewater treatment. A high-performance nano-iron sulfide (nano-FeS) hybridized biocathode was developed by regulating glucose concentration and applying an external voltage. The combination of a glucose concentration of 1000 mg/L and a 0.2 V applied voltage greatly promoted the in situ biosynthesis of nano-FeS, resulting in smaller particle sizes and increased quantities within the biocathode, leading to enhanced electrochemical performance. The MFC with the hybridized biocathode exhibited the highest power density (43.45 ± 1.69 mW/m²) and Cr(VI) removal rate (3.99 ± 0.09 mg/L·h), outperforming the control by 29% and 71%, respectively. The improvements were attributed to the following processes. (1) Nano-FeS provided additional active sites that enhanced electron transfer and electrocatalytic activity, reducing cathode passivation; (2) it protected microorganisms by reducing Cr(VI) toxicity, promoting redox-active substance enrichment and antioxidant enzyme secretion, which maintained microbial activity; (3) the biocathode selectively enriched electroactive and Cr(VI)-reducing bacteria (such as Brucella), fostering a stable and symbiotic microbial community. This study highlights the promising potential of regulating carbon source and external voltage to boost nano-FeS biosynthesis, offering a sustainable and efficient strategy for MFC-based Cr(VI) wastewater treatment with practical implications. Full article

In an enzyme-based fuel cell system, glucose oxidase and laccase were immobilized on carbon paper as the anode and cathode electrodes. A conductive polymer (polypyrrole) was added to improve conductivity. The mediator and enzymes were mixed in a phosphate-buffer solution for entrapment. A Nafion 212 membrane separated the two half-cells. Power density measurements were taken at a glucose concentration of 10 mM across different operating voltages. Potassium hexacyanoferrate III was used as a redox mediator in the anode and 2,2′-azino-bis (3-ethylbenzothiazoline-6-sulfonic acid) in the cathode to boost power output. The biofuel cells, constructed from acrylic (40 × 50 × 50 mm) with a working volume of 20 × 30 × 40 mm, were assembled using a rubber gasket to secure the Nafion membrane. The use of micropore tape covering the electrodes extended the system’s operational lifespan. Without the micropore tape, the maximum power density was 57.6 μW/cm² at 0.24 V. With the micropore tape, the cell achieved a maximum power density of 324.9 μW/cm² at 0.57 V, sustaining performance for 20 days. Thus, micropore tape effectively enhances enzyme retention and biofuel cell performance. Full article

Blast trauma presents a unique challenge due to its complex mechanism of injury, which impacts the brain and other vital organs through overpressure waves and internal bleeding. Severe blood loss leads to an inadequate oxygen supply and insufficient fuel delivery to cells, impairing ATP production by mitochondria—essential for cell survival. While clinical symptoms of metabolic disruption are evident soon after injury, the molecular, cellular, and systemic damage persists for days to years post-injury. Current challenges in treating traumatic brain injury (TBI) stem from (1) the lack of early blood-based biomarkers for detecting metabolic failure and mitochondrial damage and (2) the limited success of mitochondrial-targeted therapeutic strategies. Objectives: To identify blood-based mitochondrial biomarkers for evaluating the severity of brain injuries and to investigate therapeutic strategies targeting mitochondria. Methods: A preclinical rat model subjected to blast exposure, with or without hemorrhagic shock (HS), followed by resuscitation was utilized. Blood samples were obtained at baseline (T0), post-injury (T60), and at the conclusion of the experiment (T180), and analyzed using a validated dipstick assay to measure mitochondrial enzyme activity. Results: Blast and HS injuries led to a significant decrease in the activity of mitochondrial enzymes, including complex I, complex IV, and the pyruvate dehydrogenase complex (PDH), compared to baseline (p < 0.05). Concurrently, blood lactate concentrations were significantly elevated (p < 0.001). An inverse correlation was observed between mitochondrial enzyme dysfunction and blood lactate levels (p < 0.05). Treatment with sodium pyruvate post-injury restored complex I, complex IV, and PDH activity to near-baseline levels, corrected hyperlactatemia, and reduced reactive oxygen species (ROS) production by mitochondria. Conclusions: Serial monitoring of blood mitochondrial enzyme activity, such as complex I, complex IV, and PDH, may serve as a valuable tool for prognostication and guiding the use of mitochondrial-targeted therapies. Additionally, mitochondrial enzyme assays in blood samples can provide insights into the global redox status, potentially paving the way for novel therapeutic interventions in TBI. Full article

Cancer research has advanced tremendously with the identification of causative genes, proteins, and signaling pathways. Numerous antitumor drugs have been designed and screened for cancer therapeutics; however, designing target-specific drugs for malignant cells with minimal side effects is challenging. Recently, energy-sensing- and homeostasis-associated molecules and signaling pathways playing a role in proliferation, apoptosis, autophagy, and angiogenesis have received increasing attention. Energy-metabolism-based studies have shown the contribution of energetics to cancer development, where tumor cells show increased glycolytic activity and decreased oxidative phosphorylation (the Warburg effect) in order to obtain the required additional energy for rapid division. The role of energy homeostasis in the survival of normal as well as malignant cells is critical; therefore, fuel intake and expenditure must be balanced within acceptable limits. Thus, energy-sensing enzymes detecting the disruption of glycolysis, AMP, ATP, or GTP levels are promising anticancer therapeutic targets. Here, we review the common energy mediators and energy sensors and their metabolic properties, mechanisms, and associated signaling pathways involved in carcinogenesis, and explore the possibility of identifying drugs for inhibiting the energy metabolism of tumor cells. Furthermore, to corroborate our hypothesis, we performed meta-analysis based on transcriptomic profiling to search for energy-associated biomarkers and canonical pathways. Full article

The environmental impacts of the postindustrial era, which rely on fossil fuels, have compelled a reconsideration of the future of energy and chemical industries. Fungi are a valuable resource for improving a circular economy through the enhanced valorization of biomass and plant waste. They harbor a great diversity of oxidative enzymes, especially in their secretome. Enzymatic breakdown of the plant cell wall complex and lignocellulosic biomass yields sugars for fermentation and biofuel production, as well as aromatic compounds from lignin that can serve as raw materials for the chemical industry. To harness the biocatalytic potential, it is essential to identify and explore wild-type fungi and their secretomes. This study successfully combined genome mining and activity screening to uncover the oxidative potential of a collection of underexploited ascomycetes and basidiomycetes. The heme peroxidase and laccase activities of four promising candidates, Bipolaris victoriae, Colletotrichum sublineola, Neofusicoccum parvum and Moesziomyces antarcticus, were investigated to gain a deeper insight into their enzyme secretion. Furthermore, a plant-based medium screening with the phytopathogen C. sublineola revealed that soybean meal is a beneficial component to trigger the production and secretion of enzymes that catalyze H₂O₂-dependent oxidations. These results demonstrate that understanding fungal secretomes and their enzymatic potential opens exciting avenues for sustainable biotechnological applications across various industries. Full article

Glioblastoma (GBM) cells require high levels of nicotinamide adenine dinucleotide (NAD) to fuel metabolic reactions, regulate their cell cycle and support DNA repair in response to chemotherapy and radiation. Inhibition of a key enzyme in NAD biosynthesis, NAMPT, has demonstrated significant anti-neoplastic activity. Here, we sought to characterise NAD biosynthetic pathways in GBM to determine resistance mechanisms to NAD inhibitors. GBM cells were treated with the NAMPT inhibitor FK866 with and without NAD precursors, and were analysed by qPCR, Western blot and proliferation assays (monolayer and spheroid). We also measured changes in the cell cycle, apoptosis, NAD/NADH levels and energy production. We performed orthoptic xenograft experiments in athymic nude mice to test the efficacy of FK866 in combination with temozolomide (TMZ). We show that the expression of key genes involved in NAD biosynthesis is highly variable across GBM tumours. FK866 inhibits proliferation, reduces NAD levels and limits oxidative metabolism, leading to G2/M cell cycle arrest; however, this can be reversed by supplementation with specific NAD precursors. Furthermore, FK866 potentiates the effects of radiation and TMZ in vitro and in vivo. NAMPT inhibitors should be considered for the treatment of GBM, with patients stratified based on their expression of key enzymes in other NAD biosynthetic pathways. Full article

A novel conductive composite based on PEDOT:PSS, BSA, and Nafion for effective immobilization of acetic acid bacteria on graphite electrodes as part of biosensors and microbial fuel cells has been proposed. It is shown that individual components in the composite do not have a significant negative effect on the catalytic activity of microorganisms during prolonged contact. The values of heterogeneous electron transport constants in the presence of two types of water-soluble mediators were calculated. The use of the composite as part of a microbial biosensor resulted in an electrode operating for more than 140 days. Additional modification of carbon electrodes with nanomaterial allowed to increase the sensitivity to glucose from 1.48 to 2.81 μA × mM⁻¹ × cm⁻² without affecting the affinity of bacterial enzyme complexes to the substrate. Cells in the presented composite, as part of a microbial fuel cell based on electrodes from thermally expanded graphite, retained the ability to generate electricity for more than 120 days using glucose solution as well as vegetable extract solutions as carbon sources. The obtained data expand the understanding of the composition of possible matrices for the immobilization of Gluconobacter bacteria and may be useful in the development of biosensors and biofuel cells. Full article

Enzyme biofuel cells (EBFCs) can convert chemical or biochemical energy in fuel into electrical energy, and therefore have received widespread attention. EBFCs have advantages that traditional fuel cells cannot match, such as a wide range of fuel sources, environmental friendliness, and mild reaction conditions. At present, research on EBFCs mainly focuses on two aspects: one is the use of nanomaterials with excellent properties to construct high-performance EBFCs, and the other is self-powered sensors based on EBFCs. This article reviews the applied nanomaterials based on the working principle of EBFCs, analyzes the design ideas of self-powered sensors based on enzyme biofuel cells, and looks forward to their future research directions and application prospects. This article also points out the key properties of nanomaterials in EBFCs, such as electronic conductivity, biocompatibility, and catalytic activity. And the research on EBFCs is classified according to different research goals, such as improving battery efficiency, expanding the fuel range, and achieving self-powered sensors. Full article

Nano/micromotors are artificial robots at the nano/microscale that are capable of transforming energy into mechanical movement. In cancer diagnosis or therapy, such “tiny robots” show great promise for targeted drug delivery, cell removal/killing, and even related biomarker sensing. Yet biocompatibility is still the most critical challenge that restricts such techniques from transitioning from the laboratory to clinical applications. In this review, we emphasize the biocompatibility aspect of nano/micromotors to show the great efforts made by researchers to promote their clinical application, mainly including non-toxic fuel propulsion (inorganic catalysts, enzyme, etc.), bio-hybrid designs, ultrasound propulsion, light-triggered propulsion, magnetic propulsion, dual propulsion, and, in particular, the cooperative swarm-based strategy for increasing therapeutic effects. Future challenges in translating nano/micromotors into real applications and the potential directions for increasing biocompatibility are also described. Full article

The cell wall of Candida yeast grown on presence of hexadecane as a sole carbon source undergoes structural and functional changes including the formation of specific supramolecular complexes—canals. The canals contain specific polysaccharides and enzymes that provide primary oxidization of alkanes. In addition, inorganic polyphosphate (polyP) was identified in Candida maltosa canals. The aim of the work was a comparative study of the features of cell walls and extracellular structures in yeast C. maltosa, C. albicans and C. tropicalis with special attention to inorganic polyphosphates as possible part of these structures when grown on the widely used xenobiotic hexadecane (diesel fuel). Fluorescence microscopy with DAPI has shown an unusual localization of polyP on the cell surface and in the exovesicles in the three yeast species, when growing on hexadecane. Electron-scanning microscopy showed that the exovesicles were associated with the cell wall and also presented in the external environment probably as biofilm components. Treatment of hexadecane-grown cells with purified Ppx1 polyphosphatase led to the release of phosphate into the incubation medium and the disappearance of polyP in vesicles and cell wall observed using microscopic methods. The results indicate the important role of polyP in the formation of extracellular structures in the Candida yeast when consuming hexadecane and are important for the design of xenobiotic destructors based on yeast or mixed cultures. Full article

The increased demand for alternative sustainable energy sources has boosted research in the field of fuel cells (FC). Among these, microbial fuel cells (MFC), based on microbial anodes and different types of cathodes, have been the subject of renewed interest due to their ability to simultaneously perform wastewater treatment and bioelectricity generation. Several different MFCs have been proposed in this work using different conditions and configurations, namely cathode materials, membranes, external resistances, and microbial composition, among other factors. This work reports the design and optimization of MFC performance and evaluates a hydrogel (Ion Jelly^®) modified air-breathing cathode, with and without an immobilized laccase enzyme. This MFC configuration was also compared with other MFC configuration performances, namely abiotic and biocathodes, concerning wastewater treatment and electricity generation. Similar efficiencies in COD reduction, voltage (375 mV), PD (48 mW/m²), CD (130 mA/m²), and OCP (534 mV) were obtained. The results point out the important role of Ion Jelly^® in improving the MFC air-breathing cathode performance as it has the advantage that its electroconductivity properties can be designed before modifying the cathode electrodes. The biofilm on MFC anodic electrodes presented a lower microbial diversity than the wastewater treatment effluent used as inocula, and inclusively Geobacteracea was also identified due to the high microbial selective niches constituted by MFC systems. Full article

Enzymatic biofuel cells (EBFCs) are devices that use natural enzymes as catalysts to convert chemical energy from bio-sourced fuels into electrical energy. In this review, we summarize recent research progress and applications in the field of biofuel cells based on immobilized enzymes. Specifically, we discuss how to optimize and improve the electrochemical performance and operational stability of enzymatic biofuel cells through enzyme immobilization materials, enzyme immobilization methods, electron transfer improvement on enzyme electrodes, and cell construction methods. We also cover current and future practical applications of biofuel cells based on immobilized enzymes, including implantable enzymatic biofuel cells and wearable enzymatic biofuel cells. Additionally, we present some of the issues that still need to be addressed in the field of biofuel cells based on immobilized enzymes to ensure their technical and commercial viability and sustainability. Full article

Pure water, i.e., a sign of life, continuously circulates and is contaminated by different discharges. This emerging environmental problem has been attracting the attention of scientists searching for methods for the treatment of wastewater contaminated by multiple recalcitrant compounds. Various physical and chemical methods are used to degrade contaminants from water bodies. Traditional methods have certain limitations and complexities for bioenergy production, which motivates the search for new ways of sustainable bioenergy production and wastewater treatment. Biological strategies have opened new avenues to the treatment of wastewater using oxidoreductase enzymes for the degradation of pollutants. Fungal-based fuel cells (FFCs), with their catalysts, have gained considerable attention among scientists worldwide. They are a new, ecofriendly, and alternative approach to nonchemical methods due to easy handling. FFCs are efficiently used in wastewater treatment and the production of electricity for power generation. This article also highlights the construction of fungal catalytic cells and the enzymatic performance of different fungal species in energy production and the treatment of wastewater. Full article

As the population grows, there is a need to address the continuous depletion of non-renewable energy sources and their negative effects on the environment. This led to a substantial assessment of possible innovations and raw materials to increase the volumetric productivity of alternative fuels to supply the energy needed worldwide. In addition to its environment-friendly properties, a biofuel derived from plant-based sources is also a sustainable material. For high ethanol production from plant-based biofuel, several techniques have been developed, including cell or enzyme immobilization. The key purposes of utilizing immobilized cells or enzymes are to improve bioreactor yield with upgraded enzyme establishment and to increase enzyme utilization. The fermentation of sweet sorghum extract to produce ethanol was conducted in this study, and it was found that the optimum sodium alginate concentration for immobilizing yeast is 3% w/v. It was also found that the free yeast has a shorter optimum fermentation period which is four days (96 h), in comparison with the immobilized yeast, which is five days (120 h). The immobilized yeast has a higher ethanol concentration produced and percent conversion compared to the free yeast. The immobilized yeast entrapped in calcium alginate beads permitted ten five-day (120 h) reuse cycles which are still in stable final ethanol concentration and percent conversion. Due to a lack of experimental support in the necessary condition (optimum level of the number of fermentation days and the concentration of sodium alginate) for the optimal ethanol yield from the extract of sweet sorghum, this study was conducted. This study also tried to address the global demand for ethanol by specifying the optimum conditions necessary for efficient fermentation, specifically for ethanol production using an extract from sweet sorghum. Furthermore, this experimental work serves as a basis for further investigations concerning ethanol production from Agri-based materials, such as sweet sorghum. Full article