Search Results (157)

Electrospun nanofibrous membranes have gained considerable attention in bone tissue engineering due to their ability to mimic the extracellular matrix and provide a suitable environment for cell attachment and proliferation. This study investigates the fabrication, characterization, and biocompatibility of poly(L-lactic acid) (PLA)-based membranes enhanced with periclase (MgO) and gold nanoparticles (AuNPs). The membranes were fabricated using an optimized electrospinning process and subsequently characterized using scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDS), Fourier-transform infrared spectroscopy (FT-IR), and contact angle measurements. Additionally, in vitro biodegradation studies in simulated body fluid (SBF) and cytocompatibility tests with osteoblast-like cells were conducted. The results demonstrated that the incorporation of MgO and AuNPs significantly influenced the structural and chemical properties of the membranes, improving their wettability and bioactivity. SEM imaging confirmed uniform fiber morphology with well-distributed nanoparticles. FT-IR spectroscopy indicated successful integration of bioactive components into the PLA matrix. Cytocompatibility assays showed that modified membranes promoted higher osteoblast adhesion and proliferation compared to pristine PLA membranes. Furthermore, biodegradation studies revealed a controlled degradation rate suitable for guided bone regeneration applications. These findings suggest that electrospun PLA membranes enriched with MgO and AuNPs present a promising biomaterial for GBR applications, offering improved bioactivity, mechanical stability, and biocompatibility. Full article

Developing efficient and durable anion-exchange membranes (AEMs) is essential for advancing electrochemical energy technologies such as water electrolyzers. This study presents a methodological approach for fabricating an AEM by electrospinning a polysulfone (PSU)-based nanofibrous matrix, followed by post-activation using an ionomer solution containing quaternary ammonium (QA) functional groups. Electrospinning is a promising and versatile technique for membrane fabrication, particularly in the context of green hydrogen production via AEM water electrolysis. Its ability to produce nanofibrous matrixes with tunable morphology and properties makes it an attractive alternative to conventional methods for research across various applications. This study demonstrated the feasibility of fabricating electrospun AEMs using polysulfone as a backbone material, suggesting its promise as a potentially scalable solution to manage the high-cost issue of commercial AEMs for future hydrogen production. The resulting composite membrane exhibited ionic conductivity and electrochemical performance comparable to a benchmark membrane fabricated by activating a commercial Celgard 3401 support via phase inversion. Although the mechanical strength of the electrospun membrane was lower than that of the commercial support, its good electrochemical characteristics—combined with the potential for roll-to-roll electrospinning—underscore the promise of this approach as a viable, economically scalable strategy for future hydrogen production WE technologies. Full article

Environmentally friendly biopolymer nanofibrous composite membranes with enhanced mechanical properties and thermal stability were fabricated via electrospinning with different compositions of polylactic acid (PLA) and cellulose acetate (CA). Firstly, PLA and CA composite membranes were prepared and optimized. Then, the optimized membranes were annealed at temperatures ranging from 80 °C to 140 °C, for annealing times between 30 and 90 min. The developed membranes were characterized by FE-SEM, XRD, FR-IT, TGA, DSC, tensile testing, water contact angle, and resistance to hydrostatic pressure. PLA 95-CA 5 was the optimum composite, with a tensile strength 9.3 MPa, an average fiber diameter of 432 nm, a water contact angle of 135.7°, and resistance to a hydrostatic pressure of 16.5 KPa. Annealing resulted in further improvements in different properties. The annealed membranes had thermally stable microporous structures, without shrinkage or deterioration in nanofiber structure, even at an annealing time of 90 min and an annealing temperature of 140 °C. By increasing either the annealing time or temperature, the crystallinity and rigidity of the nanofiber composite membranes were increased. The annealed membrane demonstrated a tensile strength of 12.3 MPa, a water contact angle of 139.2°, and resistance to a hydrostatic pressure of 36 KPa. Electrospinning of PLA-CA composite membranes with enhanced mechanical properties and thermal stability will pave the way for employing PLA-based membranes in various applications. Full article

Gelatin, known for its excellent biocompatibility, strong aggregative properties, and low cost, has been extensively investigated as a promising material for food packaging. Among various fabrication methods, electrospinning stands out due to its simplicity, cost-effectiveness, high process controllability, and ability to produce nanofiber membranes with enhanced properties. This review provides a comprehensive overview of the sources, properties, and applications of gelatin, along with the fundamental principles of electrospinning and its applications in food packaging. Additionally, the common types of electrospinning techniques used in food packaging are also covered. In recent years, increasing research efforts have focused on gelatin-based electrospun nanofiber membranes for food packaging applications. The functionalization of electrospinning gelatin-based nanofiber membrane was realized by incorporating various active substances or combining it with other techniques, fulfilling the new requirements of food packaging. In this review, gelatin-based electrospun nanofiber membranes for food packaging applications are overviewed, with a particular emphasis on various types of modifications for the membranes aimed at meeting diverse application demands. Finally, the future perspectives and challenges in the research of gelatin-based electrospun nanofiber membranes for food packaging are discussed. Full article

This study aims to optimize the application of electrospun nanofibrous substrates in thin-film composite (TFC) nanofiltration (NF) membranes for enhanced liquid separation efficiency by employing a method of effective welding between fibers using latent solvents. Polyacrylonitrile (PAN) nanofiber substrates were fabricated via electrospinning, and a dense polyamide selective layer was formed on their surface through interfacial polymerization (IP). The investigation focused on the effects of different solvent systems, particularly the role of dimethyl sulfoxide (DMSO) as a latent solvent, on the nanostructure and final membrane performance. The results indicate that increasing the DMSO content can enhance the greenness of the fabrication process, the substrate hydrophilicity, and the mechanical strength, while also influencing the thickness and morphology of the polyamide layer. At a DMSO rate of 30%, the composite membrane achieves optimal pure water permeability and high rejection rates; when the DMSO content exceeds 40%, structural inhomogeneity in the substrate membrane leads to an increase in defects, significantly deteriorating membrane performance. These findings provide theoretical insights and technical guidance for the application of electrospinning technology in designing efficient and stable NF membranes. Full article

Lithium batteries have gained significant attention due to their high energy density, specific capacity, operating voltage, slow self-discharge rate, good cycle stability, and rapid charging capabilities. However, the use of liquid electrolytes presents several safety hazards. Solid-state polymer electrolytes (SPEs) offer a promising alternative to mitigate these issues. This study focuses on the preparation of an ionically conductive electrospun membrane and its potential application as an SPE. To support a circular approach and reduce the environmental impact, the target polymeric formulation combines poly(ethylene oxide) (PEO) and lignin, sourced from paper industry waste. The formulation is optimised to ensure the dissolution of lithium salts and enhance the membrane integrity. The addition of lignin is crucial to contrast the dendrites’ growth and prevent the consequent battery breakdown. The electrospinning process is adjusted to obtain stable, homogeneous nanofibrous membranes, which are characterised using electron scanning microscopy (SEM), Fourier-transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), differential scanning calorimetry (DSC), and thermal gravimetric analysis (TGA). The membranes’ potential as an SPE is assessed by measuring their ionic conductivity (>10⁻⁵ S cm⁻¹ above 50 °C) and anodic stability (≈4.6 V vs. Li/Li⁺), and by testing their compatibility with lithium metal by reversible cycling in a symmetric Li|Li cell at 55 °C. Full article

Chronic or improperly healed wounds, either as a result of extended trauma or prolonged inflammatory response, affect a significant percentage of the world population. Hence, there is a growing interest in the development of biomimetic scaffolds that expedite wound closure at the early stages. Curcumin (Cur) is a plant-derived polyphenol with antimicrobial activity, and it accelerates the wound contraction rate. Recently, electrospraying has emerged for the precise deposition of bioactive molecules into scaffolds to improve therapeutic outcomes. In this study, we produced membranes for wound healing and endowed them with antibacterial properties to promote the healing of impaired wounds. Unlike previous studies that incorporated curcumin directly into electrospun fibers, we employed electrospraying to coat curcumin onto PVA/KC membranes. This approach improves the curcumin bioavailability and release kinetics, ensuring sustained therapeutic action. Toward this end, we fabricated four types of membranes, poly(vinyl alcohol) PVA and PVA/kappa carrageenan (KC), using electrospinning, and PVA/KC/Cur5 and PVA/KC/Cur20, in which the PVA/KC membranes were coated with two different concentrations of Cur by electrospraying. All membranes showed low cytotoxicity, good cell adhesion, the capability of enabling cells to produce collagen, and an adequate degradation rate for wound-healing applications. Antibacterial evaluation showed that both Cur-loaded membranes increased the antibacterial efficacy against both Escherichia coli and Staphylococcus aureus compared with PVA and PVA/KC membranes. These findings highlight the potential of electrosprayed curcumin as an effective strategy for bioactive wound dressings. Full article

Wearable, non-invasive sweat sensors capable of continuously monitoring the pH of sweat, which is a key indicator related to metabolism and homeostasis level, are highly desirable for personal health management. However, ensuring the stability and accuracy of these sensors can be challenging when the body is in motion. In this work, we prepared a stretchable nanofibrous membrane-based electrochemical pH-sensing electrode by embedding carbon nanotubes (MWCNT) and silver nanowires (AgNWs) into an elastic electrospun nanofibrous membrane, followed by polyaniline electrodeposition. The as-prepared pH-sensing electrode showed a high sensitivity of 82.53 mV/pH and high accuracy in ionic solutions with pH ranging from 3 to 7. Notably, the electrode maintained stable sensing performance under deformations, including torsion, bending, and tensile strains up to 30%. Even after 1000 cycles of stretching at a 30% tensile strain, the detection sensitivity remained above 70 mV/pH, indicating its potential application as a wearable electrochemical sensor for monitoring sweat pH in personal health management. Full article

The rising resistance of bacteria to antibiotics has driven the search for new antimicrobial agents. This study focused on encapsulating Buforin I, an antimicrobial peptide, in chitosan/polyethylene oxide (CS-PEO) nanofibers. Buforin I was loaded at a minimum bactericidal concentration (MBC), 10× MBC, and 20× MBC, with assessments on morphology, thermal properties, chemical bonds, crystalline structure, mechanical strength, antimicrobial activity, and cell toxicity. Techniques like differential scanning calorimetry and Fourier-transform infrared spectroscopy confirmed the effective loading of Buforin I in the nanofibers. Scanning electron microscopy showed that Buforin incorporation increased nanofiber diameters. The tensile strength peaked at 20× MBC. Microbial tests indicated that the inhibition zone for nanofibers at 20× MBC surpassed that of commercial antibiotics. Beef coated with CS-PEO nanofibers containing Buforin I demonstrated reduced pH and water activity, alongside lower weight loss during storage. Texture and color analyses revealed that the Buforin I nanofibers helped maintain beef hardness and slowed color degradation compared to control samples. Moreover, thiobarbituric acid levels and total microbial counts in the coated beef were significantly lower than controls (below 3 log CFU/g after 9 days at 4 °C). Thus, these nanofibers may serve as effective antimicrobial packaging agents to delay food spoilage. Full article

The delivery of mesothelial cells by nanofibrous membranes (NFMs) can repair a damaged peritoneal mesothelium and enhance peritoneal healing in patients with chronic renal failure. On the other hand, the orientation of the nanofibers in NFMs may affect cell attachment, proliferation, and the phenotype of mesothelial cells in the nanostructured scaffold. We prepare composite gelatin/chitosan NFMs with aligned or random fiber orientations by electrospinning. We cross-link the nanofibers to maintain the fiber orientation during in vitro cell culture. We then study the cellular response of attached mesothelial cells to fiber orientation in the scaffold. From in vitro cell culture with rat mesothelial cells, the prepared NFMs show high biocompatibility to support cellular growth, regardless of fiber orientation. However, the alignment of electrospun nanofibers in a well-defined geometry can promote cell adhesion and proliferation rates with directional cell organization. The anisotropic arrangement of mesothelial cells in the aligned NFM also coincides with the phenotypic maintenance of the attached mesothelial cells, with biophysical cues provided by the aligned nanofibers. The aligned NFMs may find applications in tissue engineering of a damaged mesothelium layer or in other regenerative therapies where cellular alignment is critical for neo-tissue regeneration. Full article

Electrospinning can be used to prepare nanofiber mats from diverse polymers and polymer blends. A large area of research is the application of nanofibrous membranes for tissue engineering. Typically, cell adhesion and proliferation as well as the viability of mammalian cells are tested by seeding the cells on substrates, cultivating them for a defined time and finally dyeing them to enable differentiation between cells and substrates under a white light or fluorescence microscope. While this procedure works well for cells cultivated in well plates or petri dishes, other substrates may undesirably also be colored by the dye. Here we show investigations of the optical contrast between dyed CHO DP-12 (Chinese hamster ovary) cells and different electrospun nanofiber mats, dyed with haematoxylin-eosin (H&E), PromoFluor 488 premium, 4,6-diamidino-2-phenylindole (DAPI) or Hoechst 33342, and give the optimum dyeing parameters for maximum optical contrast between cells and nanofibrous substrates. Full article

Background: Postoperative abdominal adhesion is a prevalent complication following abdominal surgery, with the incidence of adhesion reaching up to 90%, which may precipitate a range of adverse outcomes. Although fibrous membranes loaded with various anti-inflammatory or other drugs have been proposed for anti-adhesion, most of them suffer from drug-induced adverse effects. Methods: In this study, a lecithin-based electrospun polylactic acid (PLA) nanofibrous membrane (L/P-NM) was developed for the prevention of postoperative abdominal adhesion, utilizing the hydration lubrication theory. The loaded zwitterionic lecithin allows the nanofiber surface to strongly bind water molecules to create a hydration lubrication interface. Results: As the TGA results show, the content of bound water in the nanofibers increased significantly with the increase in the lecithin content. Tribological test results show that L/P-NM reached a minimum coefficient of friction (COF) of about 0.112. Additionally, the developed nanofibrous membranes possess favorable tensile property and biocompatibility. Rat postoperative abdominal adhesion model evaluation results demonstrated that L/P-NM possesses significant anti-adhesive performance, with an adhesion score of only 1. Conclusions: Therefore, this study offers a promising strategy for efficiently preventing abdominal adhesion. Full article

Smart colorimetric packaging has been an important method to protect human health from external hazardous agents. However, the currently available colorimetric detectors use synthetic dye probes, which are costly, toxic, difficult to prepare, and non-biodegradable. Herein, an environmentally friendly cellulose nanocrystal (CNC)-supported polyvinyl alcohol (PVA) nanofibrous membrane was developed for the colorimetric monitoring of food spoilage. Anthocyanidin (ACY) is a naturally occurring spectroscopic probe that was isolated from pomegranate (Punica granatum L.). By encapsulating the anthocyanin probe in electrospun polyvinyl alcohol fibers in the presence of a mordant (M), M/ACY nanoparticles were generated. After exposure to rotten shrimp, an investigation on the colorimetric changes from purple to green for the smart nanofibrous fabric was conducted using the coloration parameters and absorbance spectra. In response to increasing the length of exposure to rotten shrimp, the absorption spectra of the anthocyanin-encapsulated nanofibrous membrane showed a wavelength blueshift from 580 nm to 412 nm. CNC displayed a diameter of 12–17 nm. The nanoparticle diameter of M/ACY was monitored in the range of 8–13 nm, and the nanofiber diameter was shown in the range of 70–135 nm. Slight changes in comfort properties were monitored after encapsulating M/ACY in the nanofibrous fabric. Full article

The electrospinning process is an effective technique for creating micro- and nanofibers from synthetic and natural polymers, with significant potential for biomedical applications and drug delivery systems due to their high drug-loading capacity, large surface area, and tunable release times. Poly(L-lactic acid) (PLLA) stands out for its excellent thermo-mechanical properties, biodegradability, and bioabsorbability. Electrospun PLLA nanofibrous structures have been extensively investigated as wound dressings, sutures, drug delivery carriers, and tissue engineering scaffolds. This study aims to create and characterize electrospun PLLA membranes loaded with spironolactone (SP), mimicking active compounds of Ganoderma lucidum (GL), to develop a biodegradable patch for topical wound-healing applications. GL, a medicinal mushroom, enhances dermal wound healing with its bioactive compounds, such as polysaccharides and ganoderic acids. Focusing on GL extracts—obtained through green extraction methods—and innovative drug delivery, we created new fibers for wound-healing potential applications. To integrate complex mixtures of bioactive compounds into the fibers, we developed a prototype using a single pure substance representing the extract mixture. This painstaking work presents the results of the fabricating, wetting, moisture properties, material resilience, and full characterization of the product, providing a robust rationale for the fabrication of fibers imbued with more complex extracts. Full article

This study presents the development of multifunctional protective clothing for disabled individuals using PBAT/PLA biopolymeric-based electrospun nanofibrous membranes. The fabric consists of a superhydrophobic electrospun nanofibrous cloth reinforced with silica nanoparticles. The resulting nanofiber membranes were characterized using FE-SEM, a CA goniometer, breathability and hydrostatic pressure resistance tests, UV–vis spectroscopy, thermal infrared photography, tensile tests, and nanoindentation. The results demonstrated the integration of superhydrophobicity, breathability, and mechanical improvements in the protective clothing. The nanofibrous porous structure of the fabric allowed breathability, while the silica nanoparticles acted as an effective infrared reflector to keep the wearer cool on hot days. The fabric’s multifunctional properties make it suitable for various products, such as outdoor clothing and accessories for individuals with disabilities. This study highlights the importance of selecting appropriate textiles for protective clothing and the challenges faced by disabled individuals in terms of mobility, eating, and dressing. The innovative and purposeful design of this multifunctional protective clothing aimed to enrich the lives of individuals with disabilities. Full article