Search Results (264)

The photon spin Hall effect (PSHE) arises from the spin–orbit interaction of light. Metasurfaces enable precise control over the PSHE through their influence. Using electromagnetic simulations as its foundation, this work engineers a metal–insulator–metal (MIM) metasurface for generating vortex beams in the near-infrared band, targeting enhanced modulation of the PSHE. Electromagnetic simulations embed vanadium dioxide (VO₂)—a thermally responsive phase-change material—within the MIM metasurface architecture. Numerical evidence confirms that harnessing VO₂’s insulator–metal-transition-mediated optical switching dynamically tailors spin-dependent splitting in the illuminated MIM-VO₂ hybrid, thereby achieving a significant amplification of the PSHE displacement. Electromagnetic simulations determine the reflection coefficients for both VO₂ phase states in the MIM-VO₂ structure. Computed spin displacements under vortex beam incidence reveal that VO₂’s phase transition couples to the MIM’s top metal and dielectric layers, modifying reflection coefficients and producing phase-dependent PSHE displacements. The simulation results show that the displacement change of the PSHE before and after the phase transition of VO₂ reaches 954.7 µm, achieving a significant improvement compared with the traditional layered structure. The dynamic modulation mechanism of the PSHE based on the thermal–optical effect has been successfully verified. Full article

Aircraft, as electromagnetically complex targets, have radar cross-sections (RCSs) that are influenced by various factors, with the inlet duct being a critical component that often serves as a primary source of electromagnetic scattering, significantly impacting the scattering characteristics. In light of the conflict between aerodynamic performance and electromagnetic characteristics in the design of aircraft engine inlet grilles, this paper proposes a metasurface radar-absorbing inlet grille (RIG) solution based on a NACA symmetric airfoil. The RIG adopts a sandwich structure consisting of a polyethylene terephthalate (PET) dielectric substrate, a copper zigzag metal strip array, and an indium tin oxide (ITO) resistive film. By leveraging the principles of surface plasmon polaritons, electromagnetic wave absorption can be achieved. To enhance the design efficiency, a multi-objective Bayesian optimization framework driven by the expected hypervolume improvement (EHVI) is constructed. The results show that, compared with a conventional rectangular cross-section grille, an airfoil-shaped grille under the same constraints will reduce both aerodynamic losses and the absorption bandwidth. After 100-step EHVI–Bayesian optimization, the optimized balanced model attains a 57.79% reduction in aerodynamic loss relative to the rectangular-shaped grille, while its absorption bandwidth increases by 111.99%. The RCS exhibits a reduction of over 8.77 dBsm in the high-frequency band. These results confirm that the proposed optimization design process can effectively balance the conflict between aerodynamic performance and stealth performance for RIGs, reducing the signal strength of aircraft engine inlets. Full article

A metasurface capable of flexibly manipulating electromagnetic waves to realize holograms presents significant potential in millimeter-wave imaging systems and data storage domains. In this study, full-space three-dimensional holograms are realized from a reflection–transmission integrated reconfigurable metasurface, which can achieve nearly 360° phase coverage in reflection space and 180° phase coverage in transmission space. By adjusting the voltage applied to the constituting electronically tunable meta-atoms of the metasurface, an octahedron hologram constituted by three hologram images in different focal planes is generated in the reflection space at 6.25 GHz. Moreover, a diamond hologram, also composed of three hologram images in different focal planes, is achieved in the transmission space at 6.75 GHz. Both the numerical simulation and experimental measurement are performed to validate the full-space holograms implemented by the modified weighted Gerchberg–Saxton (WGS) algorithm with specific phase distribution in different imaging planes. The obtained results pave the way for a wide range of new applications, such as next-generation three-dimensional displays for immersive viewing experiences, high-capacity optical communication systems with enhanced data encoding capabilities, and ultra-secure anti-counterfeiting solutions that are extremely difficult to replicate. Full article

This paper presents a compact, high-performance metasurface-based leaky-wave MIMO antenna with dimensions of 40 × 30 mm², achieving a gain of 12.5 dBi and a radiation efficiency of 85%. The antenna enables precise control of electromagnetic waves, featuring a flower-like metasurface (MTS) with coffee bean-shaped arrays on substrates of varying permittivity, separated by a cavity layer to enhance coupling. Its dual-port MIMO design boosts data throughput operating in three bands (3.75–5.25 GHz, 6.4–15.4 GHz, and 22.5–30 GHz), while the leaky-wave mechanism supports frequency- or phase-dependent beamsteering without mechanical parts. Ideal for CubeSat communications, its compact size meets CubeSat constraints, and its high gain and efficiency ensure reliable long-distance communication with low power consumption, which is crucial for low Earth orbit operations. Circular polarization (CP) maintains signal integrity despite orientation changes, and MIMO capability supports high data rates for applications such as Earth observations or inter-satellite links. The beamsteering feature allows for dynamic tracking of ground stations or satellites, enhancing mission flexibility and reducing interference. This lightweight, efficient antenna addresses modern CubeSat challenges, providing a robust solution for advanced space communication systems with significant potential to enhance satellite connectivity and data transmission in complex space environments. Full article

The impact of radomization on the radiation pattern of a millimeter-wave antenna for an ETA system utilizing synthetic aperture radar (SAR) is examined with special emphasis placed on the phase shift across both the beamwidth and the bandwidth, rather than the amplitude. Three different radomization approaches, including one based on metasurfaces, are evaluated for a radar antenna operating within the 24.05–24.25 GHz frequency range. Fabricated prototypes, both of the standalone antenna and the radomized version, are tested and compared in terms of electromagnetic image quality. The metasurface-based radome provides the best results among the radomization options analyzed. Full article

A causal electromagnetic (EM) metasurface is backed by a lossless substrate and partially absorbs obliquely incoming rays. The integral of the absorbed power along the entire frequency axis is analytically evaluated, and the obtained sum rules indicate the global absorption by such a generic configuration. The beneficial influence of the plasma frequency and damping factor on the total absorbance score as well as the opposite effect of the angle of excitation, is noted. An overall lossless behavior at the incidence direction where the propagating waves into the substrate turn into evanescent is identified, once the magnetic field is parallel to the interface. The reported results can be useful in the tailoring of spectrally dependent absorption by a whole class of planar structures and, accordingly, in the forward and inverse design of lossy photonic metasurface setups. Full article

This study presents a comprehensive numerical and experimental investigation of electric field enhancement in inverted-pyramidal gold (Au) array substrates, focusing on variable inter-pyramidal spacing for surface-enhanced Raman scattering (SERS) applications. We conducted a series of finite element method (FEM) simulations to model the spatial distribution of electromagnetic fields within plasmonic metasurfaces under 780 nm laser excitation. The results show that reducing the spacing between inverted pyramidal structures from 10 μm to 3.2 μm significantly increases the electric field intensity at both the tip and edge regions of the inverted-pyramidal Au structure, with maximum fields reaching 6.75 × 10⁷ V/m. Experimental SERS measurements utilizing 4-mercaptobenzoic acid as a Raman reporter support the simulation findings, indicating enhanced signal intensity in closely spaced configurations. These results confirm that geometric field concentration and plasmonic coupling are the dominant mechanisms responsible for SERS enhancement in these systems. This work provides a strategic framework for optimizing the geometry of plasmonic substrates to improve the sensitivity and reliability of SERS-based sensing platforms. Full article

Quasibound states in the continuum (qBICs) have aroused much attention as a feasible stage to investigate optical strong coupling due to their extremely high-quality factors (Q-factors) and extraordinary electromagnetic field enhancement. However, current demonstrations of strong coupling based on qBICs have primarily focused on the visible spectral range, while research in the near-infrared (NIR) regime remains scarce. In this work, we design a nanograting metasurface supporting Friedrich–Wintgen bound states in the continuum (FW BICs). We demonstrate that FW BIC formation stems from destructive interference between Fabry–Pérot cavity modes and metal–dielectric hybrid guided-mode resonances. To investigate the qBIC–exciton coupling system, we simulated the interaction between MoTe₂ excitons and nanograting metasurfaces. A Rabi splitting of 55.4 meV was observed, which satisfies the strong coupling criterion. Furthermore, a chiral medium layer is modeled inside the nanograting metasurface by rewriting the weak expression and boundary conditions. A mode splitting of the qBIC–chiral medium system in the circular dichroism (CD) spectrum demonstrates that the chiral response successfully transferred from the chiral medium layer to the exciton–polaritons systems through strong coupling. In comparison to the existing studies, our work demonstrates a significantly larger CD signal under the same Pascal parameters and with a thinner chiral dielectric layer. Our work provides a new ideal platform for investigating the strong coupling based on quasibound states in the continuum, which exhibits promising applications in near-infrared chiral biomedical detection. Full article

This study proposes and numerically demonstrates a novel nonreciprocal electromagnetic metasurface by integrating a highly nonlinear liquid metamaterial (LMM) with a simple two-dimensional silicon dielectric grating. The transmission characteristics of the proposed structure were investigated using a full-vector finite-element method. We demonstrated that the proposed subwavelength-thickness metasurface achieves a transmission coefficient contrast of up to 0.96 between forward and backward propagation. Highly nonlinear LMMs, when employed as nonreciprocal media, significantly lower the radiation power needed to induce a nonlinear response compared to natural materials. Furthermore, we numerically analyzed the effects of the grating’s structural parameters, LMM thickness, and packing fraction on transmittance. The proposed design holds promise for applications in optical isolators. Full article

Millimeter-wave signals experience substantial path loss when penetrating common building materials, hindering seamless indoor coverage from outdoor networks. To address this limitation, we present the 28-GHz “Meta-Window”, a mass-producible, visible transparent device designed to enhance millimeter-wave signal focusing. Fabricated via metal sputtering and etching on a standard soda-lime glass substrate, the meta-window incorporates subwavelength metallic structures arranged in a rotating pattern based on the Pancharatnam–Berry phase principle, enabling 0–360$°$ phase control within the 25–32 GHz frequency band. A 210 mm × 210 mm prototype operating at 28 GHz was constructed using a 69 × 69 array of metasurface unit cells, leveraging planar electromagnetic lens principles. Experimental results demonstrate that the meta-window achieves greater than 20 dB signal focusing gain between 26 and 30 GHz, consistent with full-wave electromagnetic simulations, while maintaining up to 74.93% visible transmittance. This dual transparency—for both visible light and millimeter-wave frequencies—was further validated by a communication prototype system exhibiting a greater than 20 dB signal-to-noise ratio improvement and successful demodulation of a 64-QAM single-carrier signal (1 GHz bandwidth, 28 GHz) with an error vector magnitude of 4.11%. Moreover, cascading the meta-window with a reconfigurable reflecting metasurface antenna array facilitates large-angle beam steering; stable demodulation (error vector magnitude within 6.32%) was achieved within a ±40$°$ range using the same signal parameters. Compared to conventional transmissive metasurfaces, this approach leverages established glass manufacturing techniques and offers potential for direct building integration, providing a promising solution for improving millimeter-wave indoor penetration and coverage. Full article

Long-wave infrared (LWIR) broadband absorption is of great significance in science and technology. The electromagnetic field energy is absorbed by the metamaterials material, leading to the enhanced light absorption, from which the Metal–Dielectric–Metal (MDM) structure is designed. FDTD simulation calculation indicate that the bandwidth within which the absorber absorption ratio greater than 90% is 11.04 μm, and the average absorption rate (9.10~20.14 μm) is 93.6%, which can be accounted for by the impedance matching theory. Upon the matching of the impedance of the metamaterial absorber with the impedance of the incident light, the light reflection is reduced to a minimum, and increase the absorption ratio. Meanwhile, the good incidence angle unsensitivity due to the metasurface structural symmetry and the characteristics of the electromagnetic field distribution at different incidence angles. Due to the form regularity of the nanoring–nanowire metasurface structure, the light acts similar in different polarization directions, and the surface plasmon resonance plays a key role. Using FDTD electromagnetic field analysis to visualize the electric field and magnetic field strength distribution within the absorber, the electromagnetic field at the interface in the nanoring–nanowire metasurface structure, promote the surface plasmon resonance and interaction with damaged materials, and improve the light absorption efficiency. Moreover, the different microstructures and the electrical and optical properties of different top materials affect the light absorption. Meanwhile, adjusting the absorption layer thickness and periodic geometry parameters will also change the absorption spectrum. The absorber has high practical value in thermal electronic devices, infrared imaging, and thermal detection. Full article

Energy-selective surfaces (ESSs) have gained attention as an advanced electromagnetic protection technology. This review discusses the evolution of ESSs, focusing on four key areas: frequency bandwidth expansion, material innovations, functional enhancements, and application diversification. ESSs have evolved from narrowband designs to providing ultra-wideband protection, covering L-band to K-band frequencies. New designs, including non-reciprocal mechanisms and cascaded filters, enhance the shielding efficiency. Material advancements like the use of vanadium dioxide (VO₂) and micro–nano fabrication techniques have reduced costs and improved performance, enabling higher-frequency applications. Future developments aim to overcome the current limitations, offering a broader bandwidth, higher power tolerance, and faster response times. ESSs play a key role in integrated electromagnetic protection systems. Full article

Metasurfaces, as subwavelength planar structures, offer unprecedented electromagnetic wavefront manipulation capabilities. However, most existing focusing metasurfaces operate in a single polarization mode, support only one focusing function, or rely on complex multi-unit configurations, limiting their versatility in practical applications. This study proposes a dual-polarization multiplexed transmissive focusing metasurface operating at 5.8 GHz. Through theoretical analysis and full-wave simulations, the electromagnetic response of the metasurface unit is systematically investigated. To overcome the limitations of conventional transmissive units, an anisotropic low-profile unit is designed using a hybrid stacking strategy that combines dielectric substrates and an air layer, achieving a compact profile of only 0.16λ. This unit achieves 360° phase modulation with a transmission magnitude exceeding 0.85 while being lightweight and cost-effective. Based on the unit, three metasurface arrays are developed to achieve various focusing functions, including single-point offset focusing, dual-point focusing, and multi-focal energy-controlled focusing, offering over 15% operational bandwidth and maintaining satisfactory performance under a 25° oblique incidence, with respective efficiencies of 35.59%, 25.11%, and 33.42%. This work provides a novel solution for multifunctional focusing applications, expanding the potential of metasurfaces in wireless communication, wireless power transfer, and beyond. Full article

With the rapid development of 5G communication technology, there is an increasing demand for high-performance antennas and beam control technologies, making the development of novel metamaterial structures capable of precise electromagnetic wave manipulation a current research hotspot. This paper presents a coding metasurface specifically designed for 5G communication applications, operating at a frequency of 3.5 GHz. The design employs a unique annular metasurface unit structure capable of achieving both single-beam and dual-beam functionalities. Through convolution operations, precise control over the reflection angle is achieved, with an adjustable range from 51.5° to 17.5° and a resolution of 10°. This design overcomes the inherent limitations of traditional gradient coding methods, providing a comprehensive framework for wide-angle reflection control in metasurface design. The research results demonstrate that the coding metasurface can effectively control the reflection direction of electromagnetic waves at 3.5 GHz, exhibiting dual-polarization modulation capabilities and maintaining stable performance under oblique incidence conditions within 20°. Experimental validation confirms the beam control functionality of the design in real-world environments, highlighting its potential to enhance signal reception sensitivity and transmission efficiency in 5G wireless communications. This work opens new avenues for research in reconfigurable and intelligent metasurfaces, with potential applications extending beyond 5G to future 6G networks and Internet of Things (IoT) systems. Full article

Laser-induced graphene (LIG) has become a promising stealth material due to its excellent electromagnetic loss characteristics in the terahertz and microwave bands (2–18 Ghz) and the advantages of low-cost large-scale manufacturing. With the rapid advancement of electromagnetic detection technologies toward multispectral and high-dynamic-range capabilities, there is an increasing demand for LIG-based stealth materials with superior absorption performance. The synergistic design of functional material doping and structural configurations has been identified as a critical approach to achieve high electromagnetic shielding performance in LIG-based composites. This article briefly reviews the developmental progress of LIG-based electromagnetic stealth materials, with a particular emphasis on doping technologies and shielding mechanisms tailored for stealth applications. Furthermore, we propose potential future development pathways for LIG-based stealth materials to facilitate their transition toward broader practical applications. Full article