Search Results (178)

Melanin-related materials efficiently emulate the adhesion properties of natural mussel filaments and have been used advantageously for surface modification and for fabrication of electrochemical sensors for detection of environmentally relevant targets. The most applicable advantages of melanin-based coatings are their biocompatibility and versatility, and they can be easily prepared and modified according to simple and highly environmentally friendly procedures. For these reasons, melanin-related materials, in particular polydopamine, which can be obtained simply via oxidative polymerization of dopamine in an aqueous solution in the presence of atmospheric oxygen, have been applied in a large variety of scientific and technological fields. Here, we summarize and critically discuss the most recent and important applications of melanin-related materials in the development of electrochemical sensors for monitoring the environment and food. In particular, the examples used in this paper include toxic metal ions, drugs, and pesticides. In the final section of this paper, the actual limitations of the existing approach are discussed and possible future design improvements are suggested. Full article

Diabetic wounds are characterized by a refractory healing cycle resulting from the synergistic effects of hyperglycemic microenvironment, oxidative stress, bacterial infection, and impaired angiogenesis. Conventional hydrogel dressings, with limited functionality, struggle to address the complexities of chronic diabetic ulcers. Smart hydrogels, possessing biocompatibility, porous architectures mimicking extracellular matrix, and environmental responsiveness, have emerged as promising biomaterials for diabetic wound management. This review systematically elucidates the specific response mechanisms of smart hydrogels to wound microenvironmental stimuli, including pH, matrix metalloproteinase-9 (MMP-9), reactive oxygen species (ROS), and glucose levels, enabling on-demand release of antimicrobial agents and growth factors through dynamic bond modulation or structural transformations. Subsequently, the review highlights recent advances in novel hydrogel-based sensors fabricated via optical (photonic crystal, fluorescence) and electrochemical principles for real-time monitoring of glucose levels and wound pH. Finally, critical challenges in material development and scalable manufacturing of multifunctional hydrogel components are discussed, alongside prospects for precision diagnostics and therapeutics in diabetic wound care. Full article

The tumor microenvironment contains distinctive biomarkers, including acidic pH, elevated levels of reactive oxygen species (ROS), and hypoxia, necessitating the development of efficient biosensors for simplified cancer detection. This study presents an O₂-responsive hydrogel biosensor composed of [1,1′-biphenyl]-2,2′,4,4′,5,5′-hexaol (HDP) and polyvinyl alcohol (PVA) that exploits polyphenol-mediated interactions under N₂ and O₂ microenvironments. The oxidative susceptibility of the polyphenolic HDP moiety influences its distinct mechanical, physical, and electrochemical properties, allowing the differentiation between cancerous and normal cells. The in vitro assessments with cancer cell lines (HeLa and B16F10) and normal cell lines (CHO-K1) enabled distinctive electrical and mechanophysical outputs, as evidenced by enhanced mechanical compressive modulus and high conductivity, regulated by normoxic cellular states. In addition, the inherent ROS-scavenging capability of the HDP–PVA hydrogel sensor supports its potential application in hypoxia-related diseases, including cancer. Full article

Microplastics in aqueous media can be detected through transient oxygen reduction from impacts with an electrified carbon-coated microwire. Each impact is recorded as a spike count in the time domain or as prominent peaks in the frequency domain. The spike count increased from approx. 60 s⁻¹ (pure solution) to 90 s⁻¹ (with microplastics) and 230 s⁻¹ (microplastics in deoxygenated solutions), whereas the frequency domain revealed the presence of spikes in the 7, 21, and 24 Hz regions. The spike count showed a co-variance with the concentration of microparticles, with a linear detection range from 0.02% (w/v) to 0.04% (w/v). The electrochemical sensor, characterized by its simple and cost-effective design, may provide a rapid and user-friendly method for the detection of microplastics. Full article

Silver nanoparticles (AgNPs) have attracted tremendous attention in recent years due to their unique physicochemical properties, including pronounced surface plasmon resonance, tunable size, and amenability to functionalization. These attributes underpin the growing interest in AgNPs as SMART nanocarriers for targeted drug delivery and as active components in biosensing platforms. In this work, we discuss various synthesis strategies for AgNPs—ranging from conventional chemical methods to green approaches—and highlight their subsequent functionalization with anticancer drugs, notably doxorubicin (DOX). We also examine the potential of AgNPs in biosensor applications, emphasizing electrochemical and optical detection modalities capable of monitoring drug release, oxidative stress, and relevant biomarkers. Our experimental data support the conclusion that AgNPs can effectively improve therapeutic efficacy by exploiting tumor-specific conditions (e.g., lower pH) while also enhancing biosensor sensitivity via surface plasmon resonance and electrochemical signal amplification. We provide a thorough discussion of the results, including mechanistic aspects of reactive oxygen species (ROS) generation, drug release kinetics, and sensor performance metrics. Overall, AgNP-based nanocarriers emerge as a powerful platform to address current challenges in precision oncology and medical diagnostics. Full article

Titanium oxynitride (TiNO) thin films represent a multifaceted material system applicable in diverse fields, including energy storage, solar cells, sensors, protective coatings, and electrocatalysis. This study reports the synthesis of TiNO thin films grown at different substrate temperatures using pulsed laser deposition. A comprehensive structural investigation was conducted by X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), Non-Rutherford backscattering spectrometry (N-RBS), and X-ray absorption spectroscopy (XAS), which facilitated a detailed analysis that determined the phase, composition, and crystallinity of the films. Structural control was achieved via temperature-dependent oxygen in-diffusion, nitrogen out-diffusion, and the nucleation growth process related to adatom mobility. The XPS analysis indicates that the TiNO films consist of heterogeneous mixtures of TiN, TiNO, and TiO₂ phases with temperature-dependent relative abundances. The correlation between the structure and electrochemical behavior of the thin films was examined. The TiNO films with relatively higher N/O ratio, meaning less oxidized, were more electrochemically active than the films with lower N/O ratio, i.e., more oxidized films. Films with higher oxidation levels demonstrated enhanced crystallinity and greater stability under electrochemical polarization. These findings demonstrate the importance of substrate temperature control in tailoring the properties of TiNO film, which is a fundamental part of designing and optimizing an efficient electrode material. Full article

Electrochemiluminescence (ECL)/electrochemistry (EC) dual-mode sensors have garnered significant interest for their enhanced analytical reliability through the cross-verification of dual-signal outputs. However, conventional approaches necessitate two potential scans to acquire ECL and EC signals independently, resulting in temporal and environmental discrepancies between the two detection modes. In this paper, we present a novel synchronous ECL/EC dual-mode sensing platform for lead ion (Pb²⁺) detection via a one-step potential scan (0.2 to −0.4 V vs. Ag/AgCl) utilizing a G-quadruplex (G4)–hemin DNAzyme complex. This complex synergistically catalyzed the electrochemical reduction of dissolved oxygen, concurrently generating a distinct cathodic ECL emission from Ru(bpy)₃²⁺ and a synchronous reduction current peak at −0.25 V. Pb²⁺ quantification was achieved through its dose-dependent suppression of DNAzyme activity by destabilizing the G4–hemin interaction, thereby proportionally attenuating both ECL intensity and EC signal (reduction current). The integrated sensor demonstrated high sensitivity (detection limits of 1.51 nM for ECL detection and 2.03 nM for EC detection), robust anti-interference capability, and satisfactory reproducibility, with recoveries ranging from 95.5 to 103.1% in environmental water analysis. This work established a paradigm for one-step dual-mode sensor design, offering new prospects for environmental monitoring. Full article

Excessive levels of heavy metal pollutants in the environment pose significant threats to human health and ecosystem stability. Consequently, the accurate and rapid detection of heavy metal ions is critically important. A AgNPs@CeO₂/Nafion composite was prepared by dispersing nano-ceria (CeO₂) in a Nafion solution and incorporating silver nanoparticles (AgNPs). The morphology, microstructure, and electrochemical properties of the modified electrode materials were systematically characterized using scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDX), X-ray diffraction (XRD), and cyclic voltammetry (CV). By leveraging the oxygen vacancies and high electron transfer efficiency of CeO₂, the strong adsorption capacity of Nafion, and the superior conductivity of AgNPs, an AgNPs@CeO₂/Nafion/GCE electrochemical sensor was developed. Under optimized conditions, trace Pb²⁺ in water was detected using square wave anodic stripping voltammetry (SWASV). The sensor demonstrated a linear response for Pb²⁺ within the concentration range of 1–100 μg·L⁻¹, with a detection limit of 0.17 μg·L⁻¹ (S/N = 3). When applied to real water samples, the method achieved recovery rates between 93.7% and 110.3%, validating its reliability and practical applicability. Full article

In this study, silver nanoparticles (Ag NPs) were synthesized on the surface of rutile-phase titanium dioxide (R-TiO₂) using a plasma-assisted technique. Comprehensive analyses were conducted to investigate the structural, morphological, optical, and electrical properties of the synthesized nanocomposites. Transmission electron microscopy (TEM) images revealed the uniform decoration of Ag NPs (average size: 29.8 nm) on the R-TiO₂ surface. X-ray diffraction (XRD) confirmed the polycrystalline nature of the samples, with decreased diffraction peak intensity indicating reduced crystallinity due to Ag decoration. The Williamson–Hall analysis showed increased crystallite size and reduced tensile strain, suggesting grain growth and stress relief. Raman spectroscopy revealed quenching and broadening of R-TiO₂ vibrational modes, likely due to increased oxygen vacancies. X-ray photoelectron spectroscopy (XPS) confirmed successful plasma-assisted deposition and the coexistence of Ag⁰ and Ag⁺ states, enhancing surface reactivity. UV-Vis spectroscopy demonstrated enhanced light absorption across the spectral range, attributed to localized surface plasmon resonance (LSPR), and a reduced optical bandgap. Dielectric properties, including dielectric constants, loss factor, and AC conductivity, were evaluated across frequencies (4–8 MHz) and temperatures (20–240 °C). The AC conductivity results indicated correlated barrier hopping (CBH) and overlapping large polaron tunneling (OLPT) as the primary conduction mechanisms. Composition-dependent dielectric behavior was interpreted through the Coulomb blockade effect. These findings suggest the potential of plasma assisted Ag NP-decorated R-TiO₂ nanostructures for photocatalysis, sensor and specific electro electrochemical systems applications. Full article

A novel material composed of Au@SiO₂-(3-Aminopropyl Triethoxysilane) (Au@SiO₂-APTES) was successfully synthesised using the sol–gel method, and was used to modify glassy carbon electrodes. Its effectiveness as a molecular recognition element is evaluated in the design of an electrochemical sensor for the precise detection of dopamine. The Au@SiO₂-APTES composite was analysed using Fourier transform infrared spectroscopy, scanning electron microscopy, energy-dispersive X-ray spectroscopy, and X-ray diffraction. Elemental analysis verified the presence of oxygen, silicon, and gold, with atomic percentages of around 77.19%, 21.12%, and 1.65%, respectively. The corresponding elemental mapping for Au@SiO₂-APTES composite showed that the spatial distribution of all the elements was fairly homogeneous throughout the composite, indicating that the Au NPs are embedded in the silica structures. Traces of dopamine were detected by differential pulse voltammetry with a low limit of detection (S/N = 3) and quantification (S/N = 10) of 1.4 × 10⁻⁸ molL⁻¹ and 4.7 × 10⁻⁸ molL⁻¹, respectively. The Au@SiO₂-APTES composite had two linear ranges: from 4.7 × 10⁻⁸ to 1 × 10⁻⁷ molL⁻¹ and 1.25 × 10⁻⁷ to 8.75 × 10⁻⁷ molL⁻¹. Moreover, the sensor showed outstanding selectivity even in the presence of various potential interfering species. It also demonstrated good reusability and signal recovery when tested in human urine and plasma samples spiked with different dopamine concentrations. The electrochemical sensor, constructed using this novel composite material, shows great promise in the selective and sensitive detection of dopamine in the biological matrix. These results underscore the sensor’s capability for practical application in analysing real-world samples. Full article

Black-odorous water (BOW) in urban areas poses significant risks to water safety and human health. Chemical oxygen demand (COD) is a critical parameter for the control and monitoring of BOW. However, traditional methods for COD determination are expensive, time-consuming, and involve the use of hazardous chemicals. In this study, reduced graphene oxide (rGO) and transitional metal particles (Cu, Ni) were used as working electrode materials for facile on-site determination of COD in BOW. Three composite materials (rGO/Cu, rGO/Ni, and rGO/Cu/Ni) were synthesized by one-step chemical reduction with different ratios, and their microstructure and chemical composition were characterized. Glucose solution and real water were used to evaluate the electrocatalytic performance of the different sensors. The ternary composite (rGO/Cu/Ni) screen-printed electrode sensor demonstrated excellent performance in COD analysis, with a low limit of detection (18.9 mg L⁻¹), a broad linear detection range from 53 to 1500 mg L⁻¹, and a 1.61% relative error for real water samples. The testing results were highly consistent with those obtained using the standard chromium sulfate method. This study offers promising prospects for the mass production of cost-effective COD electrochemical sensors, facilitating real-time, on-site monitoring of water bodies in major urban areas. Full article

The operating principle of a fuel cell is attracting increasing attention in the development of self-powered electrochemical sensors (SPESs). In this type of sensor, the chemical energy of the analyzed substance is converted into electrical energy in a galvanic cell through spontaneous electrochemical reactions, directly generating an analytical signal. Unlike conventional (amperometric, voltammetric, and impedimetric) sensors, no external energy in the form of an applied potential is required for the redox detection reactions to occur. SPESs therefore have several important advantages over conventional electrochemical sensors. They do not require a power supply and modulation system, which saves energy and costs. The devices also offer greater simplicity and are therefore more compatible for applications in wearable sensor devices as well as in vivo and in situ use. Due to the dual redox properties of hydrogen peroxide, it is possible to develop membraneless fuel cells and fuel-cell-based hydrogen peroxide SPESs, in which hydrogen peroxide in the analyzed sample is used as the only source of energy, as both an oxidant and a reductant (fuel). This also suppresses the dependence of the devices on the availability of oxygen. Electrode catalyst materials for different hydrogen peroxide reaction pathways at the cathode and the anode in a one-compartment cell are a key technology for the implementation and characteristics of hydrogen peroxide SPESs. This article provides an overview of the operating principle and designs of H₂O₂–H₂O₂ fuel cells and H₂O₂ fuel-cell-based SPESs, focusing on biomimetic and nanozyme catalysts, and highlights recent innovations and prospects of hydrogen-peroxide-based SPESs for (bio)electrochemical analysis. Full article

Dissolved oxygen (DO) is a crucial parameter in water quality monitoring because it directly affects the health of aquatic ecosystems. This study explored electrodeposited Cu₂O thin-film semiconductors for DO sensing. Cu₂O was chosen for its low cost, eco-friendliness, and non-toxic nature. Cu₂O films were electrodeposited on titanium (Ti) substrates using an acetate bath (0.1 M sodium acetate and 0.01 M cupric acetate) at −200 mV versus Ag/AgCl for 30 min, with a bath temperature of 55 °C, stirred at 50 rpm. The bath pH was systematically adjusted from 5.8 to 6.8 in 0.2 steps using NaOH and Acetic acid. A range of analyses including synchrotron X-ray diffraction (SXRD), scanning electron microscopy (SEM), surface wettability, capacitance–voltage (C-V), Raman spectroscopy, Fourier-transform infrared (FTIR) spectrum, and Electrochemical Impedance Spectroscopy (EIS) was performed to assess their properties and sensing performance. The results showed that Cu₂O films deposited at pH 6.4 exhibited optimal performance for DO sensing, with a strong linear response, marking this pH, deposition time, and temperature as ideal for creating effective DO sensors. This study introduces a novel, cost-effective approach to dissolved oxygen sensing using electrodeposited n-Cu₂O thin-film semiconductors, marking the first application of this material in such sensors and showcasing its potential for scalable and environmentally sustainable sensing technologies. Full article

Compared to natural enzymes, the development of efficient artificial simulated enzymes, such as those based on bimetallic materials with high catalytic activity and good stability, is an important way until now. Herein, we employed ZnCo₂O₄ microspheres as carriers to synthesize Pt-doped composites with different amounts using a one-pot method. The morphology and structure of the synthesized materials were characterized using XRD, SEM, BET, FT-IR, XPS, and Zeta potential techniques. It was found that Pt⁰ adhered well to the surface of ZnCo₂O₄ microspheres, with a 12.5% Pt doped ratio exhibiting abundant oxygen vacancies, excellent substrate affinity, and high peroxidase-like activity. Using fluorescent probes and electrochemical methods, the peroxidase-like catalytic mechanism has been explored that Pt@ZnCo₂O₄ microspheres can accelerate the electron transfer between H₂O₂ and 3,3′,5,5′-tetramethylbenzidine (TMB). Based on the optimal loading ratio of 12.5% of Pt@ZnCo₂O₄, a colorimetric sensor for visual detection of L-cysteine (L-Cys) was constructed, exhibiting a wide linear range of 0.1~50 µM and a low detection limit of 0.0163 µM. The sensor possesses good selectivity, reusability, and usage stability, which can be well applied to the determination of L-Cys in health product capsules with recovery rates of 96.9%~103.7% and RSD of 1.07%~6.50%. This work broadens the application prospects of spinel materials such as ZnCo₂O₄ in the field of biological analysis and also provides inspiration for the development of new artificial simulated enzymes. Full article

In this work, the influence of surface functionalization due to synthesis conditions of graphene oxide quantum dots GOQDs was evaluated for dopamine (DA) detection. GOQDs were synthesized using HNO₃ (6 M or 8 M) through a liquid-phase oxidation method. The characterization (HRTEM, FTIR, Raman, and XRD) and evaluation by amperometry (AMP) and differential pulse voltammetry (DPV) showed that GOQDs-8 synthesized with higher oxygen content were more sensitive and selective in DA detection than GOQDs-6. The synergistic effects of electrostatic attraction from glassy carbon electrode negatively charged surface, functionalization for inner-sphere mechanism, and edge effect from lower particle size resulted in amplified electrochemical signal achieving detection at nanomolar level using AMP and DPV. When evaluated using AMP, GCE/GOQDs-8 showed a sensitivity of 0.0422 μA μM^–1, a limit of detection (LOD) of 17.6 nM, a linear range from 0.1 to 100 μM, and minimal interference for uric acid, levodopa, and acetaminophen. In contrast, using DPV, the GCE/GOQDs-8 exhibited a sensitivity of 0.0616 μA μM^–1, a LOD of 506 nM, and a linear range from 0.1–30 μM with remarkable selectivity from all interferent species. The assay of GOQDs-8/GCE sensor in normal human serum proved to be feasible for the practical determination of DA. The recovery obtained was in the range of 94.1 to 112.8% with a relative standard deviation (RSD), n = 3 of less than 3.62%. The oxygen-rich material showed a promising performance that can be further improved with additional nanocarbon or conducting polymers supports. Full article