Search Results (309)

To investigate the influence of humus on the corrosion behavior of high-tin bronze in soil environments, potentiostatic polarization was applied to simulate early-stage corrosion under controlled conditions. Open-circuit potential and potentiodynamic polarization tests were performed, and corrosion products were characterized by stereo microscopy, SEM-EDS, and confocal Raman spectroscopy. A Cu–Sn–Pb ternary alloy was examined in simulated archaeological soil solutions with selective humus addition at different pH values. A bilayer structure, consisting of a secondary corrosion layer and a semi-corroded transition zone, developed in all media, with more extensive corrosion under weakly acidic conditions. In acidic environments, humus enhanced preferential α-phase corrosion, associated with copper depletion and tin enrichment as SnO₂. Under weakly alkaline conditions, humus mainly affected surface color and micro-morphology without altering the overall corrosion pattern. Electrochemical testing reproduced corrosion layer structures similar to those formed during early burials, but differences in morphology were observed. The results suggest that, as an accelerated corrosion technique, electrochemical methods can reproduce key features of early-stage corrosion in high-tin bronze and serve as an effective tool for monitoring corrosion behavior. Full article

In this work, the coordination compound sulfate of aqua{tris(2-pyridylmethyl) amine}zinc(II) ([Zn(TPA)(H₂O)]SO₄) is investigated as a catalyst for the molecular reduction of CO₂. The complex was synthesized and characterized by FT–IR, UV–Vis, TGA, and NMR spectroscopy. Cyclic voltammetry reveals irreversible electrochemical behavior, with two cathodic peaks at E_pc = −1.72 V and E_pc = −1.99 V vs. Fc/Fc⁺, respectively. Under a CO₂ atmosphere, a catalytic wave appears at E_pc = −1.87 V vs. Fc/Fc⁺, indicating catalytic activity toward CO₂ reduction. This behavior was further confirmed by Foot-of-the-Wave Analysis (FOWA), which yielded a catalytic rate constant of (k = 1.352 × 10³ M⁻¹ s⁻¹). Bulk electrolysis experiments combined with FT–IR analysis suggest that format is the main product of the CO₂ reduction catalyzed by [Zn(TPA)(H₂O)]SO₄. Electrochemical impedance spectroscopy was used to examine the catalytic process at the electrode–electrolyte interface. In addition, density functional theory (DFT) calculations were conducted to analyze the interaction between the [Zn(TPA)(H₂O)]SO₄ complex and CO₂. Full article

In zinc electrowinning, industrial Pb-Ag anodes have inherent limitations, including high oxygen evolution overpotential and rapid corrosion. This study constructs Ti-Ti₂N-PbO₂-CeMnO_x composite anodes to overcome these shortcoming, Electrochemical characterization revealed enhanced performance with a reduced overpotential (725 mV 50 mA cm⁻²) and lower Tafel slope (102.92 mV dec⁻¹) in the standard zinc electrowinning electrolyte, indicating faster oxygen evolution kinetics compared to commercial benchmarks. Analysis of the XPS test revealed an increase in the content of Mn³⁺, which helps enhance the OER catalytic activity of the electrode. The Ti/Ti₂N/α/β-PbO₂-CeMnO_x (abbreviation: CMO) composite anode exhibited superior corrosion resistance with an extended service life of 53 h under accelerated polarization at 2 A cm⁻². This durability enhancement is attributed to the combined effects of the Ti₂N interlayer and CMO incorporation, which effectively mitigate anode degradation through passivation inhibition. The developed fabrication strategy enables the production of dimensionally stable anodes (DSAs) with balanced electrocatalytic activity and operational stability, showing promising potential for industrial zinc electrowinning applications. Full article

This study investigated how increased Cr and Ni contents affect the corrosion behavior and rust layer evolution of HRB500 rebar in chloride-containing environments. Corrosion of the Cr- and Ni-alloyed rebars was characterized by distinct stages: in the initial stage, before a stable rust layer formed, the corrosion rate increased; with continued immersion, corrosion products progressively covered the surface and became more compact, and the overall corrosion rate decreased. Higher Cr and Ni contents were found to mitigate overall corrosion damage, markedly suppress localized corrosion, and shift the corrosion morphology toward a more uniform attack. Electrochemical measurements showed a noble shift in corrosion potential, a reduction in corrosion current density, and significant increases in low-frequency impedance and charge transfer resistance, indicating enhanced barrier properties against charge transfer and ionic migration. With corrosion progression, rust layer phases evolved from an Fe₃O₄-dominated assemblage to enrichment in stable iron oxyhydroxides; the fraction of α-FeOOH increased, raising the α/γ* index and suggesting improved rust layer stability and protectiveness. Mechanistically, Cr and Ni enrichment was found to facilitate the conversion of metastable products to α-FeOOH and to promote the formation of compact spinel oxides FeCr₂O₄ and NiFe₂O₄, thereby hindering chloride ion ingress and interfacial corrosion reactions and markedly improving corrosion resistance. Overall, this work elucidated the Cr–Ni co-alloying mechanism for rust layer stabilization and pitting suppression. At 504 h, the high Cr–Ni rebar reduced the maximum pit depth by approximately 61.8% and lowered i_corr to approximately 43% of that of the low Cr–Ni rebar, thereby providing quantitative guidance for marine-grade rebar design. Full article

Co/Fe layered double hydroxides (LDHs) are among the most promising materials for advanced industrial and energy applications. Controlling the synthesis conditions of LDH materials is thus crucial to precisely tailoring cation composition and distribution, thereby regulating surface charge, ion sorption, and electron transfer required for optimal chemical and electrochemical performance. Therefore, characterizing Co/Fe precipitates (chemical composition, purity, morphology, and crystallinity) is also required to further exploit their controlled properties. Thus, solids with Co/Fe cation ratios between 2/2 and 10/2 were synthesized under an air atmosphere, at pH 8 or 11.5. For the first time, multiscale physicochemical techniques (FTIR, TEM-EELS, SEM, AAS, TGA, CHN elemental analysis, and XRD complemented by Rietveld refinement) were used to provide a fully documented characterization of the structure, texture, purity, chemical composition, and thermal properties of Co/Fe LDH-based materials. The combined interpretation of data from these complementary techniques enabled the precise identification and chemical characterization of the mineralogical phases formed. Both acid–base and redox reactions govern the overall Co^II/Fe^III LDH formation process. Well-crystallized LDHs were synthesized, except for the 2/2 ratio at pH 11.5, which led to the formation of α-Co(OH)₂, γ-Fe₂O₃, and Co₃O₄ byproducts. A pH value of 8.0 provides valuable LDH materials made of quasi-hexagonal particles with diagonal lengths between 200 and 500 nm. Rietveld refining showed the presence of LDH phases in the range of 95–98%. Multiple local chemical analyses using EDX on chosen particles demonstrated pure 4/2 and 6/2 LDHs. For the 2/2 ratio, the cumulative mass fraction of two LDH-type products consistently reached 97%, distributed between Co/Fe 1.5/2 (71%) and Co/Fe 4/2 (29%). For the 10/2 ratio, only partial Co precipitation was observed, forming 95% Co/Fe LDH phases distributed between Co/Fe 10/2 (72%) and 7/2 (28%). Full article

The development of smart coatings with active protection is a promising approach to prolonging the service life in extreme environments. Herein, the corrosion inhibitors 2-mercaptobenzimidazole (MBI) and CeO₂ were in situ loaded onto the surface of graphene oxide (GO) by dopamine (DA) polymerization, and we ultimately obtained the multifunctional composite MBI@CeO₂@PDA@GO (MCPG). The electrochemical impedance spectroscopy (EIS) results revealed that after 30 days of immersion in the corrosive media, the |Z|_0.01 Hz value of MCPG/WEP coating remained at 3.7 × 10⁹ Ω/cm², which displayed four orders of magnitude higher than that of pure WEP coating (1.4 × 10⁵ Ω/cm²). In a 200 h salt spray test, the MCPG/WEP coating also demonstrated minimal corrosion products and bubbles, affirming the exceptional corrosion-inhibiting effect and excellent self-healing performance. Consequently, the synergistic combination of pH-sensitive properties and outstanding barrier effect imparted dual active/passive anti-corrosion capabilities to the coating, resulting in long-lasting metal protection. Full article

Considering the demand for nutritional assessment and product quality control in the tea industry, this work develops an effective electrochemical sensor based on gold nanoparticles electrodeposited onto a zeolitic imidazolate framework (Au/MOF(Zn)) for evaluating the antioxidant activity of tea subjected to microwave-assisted drying (MAD) through hydrogen peroxide (H₂O₂) scavenging. The MOF(Zn) enables uniform deposition of AuNPs, which significantly enhances the electrocatalytic oxidation of H₂O₂. The fabricated sensor exhibits a wide linear detection range from 400 μM to 1.8 mM for H₂O₂ with a correlation coefficient of 0.9983. The experimental results demonstrate acceptable selectivity, with signal interference <5% from common tea compounds like inorganic ions, sugars, and organic acids. Electrochemical methods, including cyclic voltammetry (CV) and differential pulse voltammetry (DPV) analysis, were employed to quantify H₂O₂ by measuring oxidation currents in phosphate-buffered saline (PBS, pH 7.0). The relative standard deviation (RSD) for repeatability and reproducibility was 5.1% and 6.8%, respectively, confirming high reliability. This sensor was successfully applied to assess antioxidant capacity in tea extracts obtained from fresh leaves subjected to microwave-assisted drying under varying power and duration. Results indicate that increasing microwave power enhances antioxidant activity, while prolonged drying at low power initially increases activity (peaking at 120 s) but reduces it upon extended exposure. Optimal antioxidant preservation was achieved at 120 s. This real-time, reliable sensing strategy offers theoretical foundations for optimizing tea processing parameters to preserve bioactive compounds, particularly polyphenols like catechins, thereby improving tea quality and health benefits. Full article

The realization of efficient and durable earth-abundant electrocatalysts for alkaline hydrogen evolution reaction (HER) is critical for scalable hydrogen production, yet remains limited by insufficient intrinsic activity. Herein, we demonstrate a precursor-controlled hydrothermal strategy that enables precise morphology and surface-state regulation of spinel Co₂NiO₄ directly grown on nickel foam, allowing a clear correlation between catalyst architecture and HER performance. By replacing urea with hexamethylenetetramine, an ultrathin, highly interconnected two-dimensional nanosheet network (CNO-HT) is obtained, which promotes efficient electron transport, rapid electrolyte penetration, and maximized exposure of catalytically active sites. Structural and spectroscopic analyses confirm the formation of phase-pure cubic Co₂NiO₄ with enriched mixed-valence Ni and Co species, favoring enhanced redox activity. The CNO-HT catalyst exhibits a low overpotential (86 mV at 10 mA cm⁻²) and a smaller Tafel slope (103 mV dec⁻¹), significantly outperforming the urea-derived counterpart. Importantly, the catalyst maintains stable HER operation for 96 h at both 10 and 100 mA cm⁻², with post-stability electrochemical analyses confirming preserved kinetics and interfacial properties. This work establishes precursor-regulated nanosheet engineering as general and scalable strategy to unlock the intrinsic catalytic potential of spinel metal oxides, offering actionable design principles for next-generation non-noble electrocatalysts for alkaline hydrogen production. Full article

Iodine-based contrast agents (ICMs) are crucial substances in medical imaging because of their potent X-ray characteristics and chemical stability. However, their persistence and poor removal in conventional wastewater treatment have led to increasing environmental concern. Although ICMs exhibit low acute toxicity, their transformation during water disinfection can generate iodine-based disinfection by-products (I-DBPs), like iodo-trihalomethanes, which display notable cytotoxic, genotoxic, and ecotoxic effects and compromise drinking water quality. Advanced oxidation processes (AOPs) have become promising methods for breaking down persistent ICMs and limiting the formation of I-DBPs. Techniques including ozonation, UV/H₂O₂, UV/chlorine, photocatalysis with TiO₂, Fenton reactions, and electrochemical oxidation utilize highly reactive radicals to decompose persistent compounds like iopamidol, iohexol, iopromide, and diatrizoate. Despite high degradation efficiencies under laboratory conditions, limitations such as incomplete mineralization, secondary product formation, and elevated operational costs hinder large-scale implementation. Future research should focus on optimizing AOP conditions under realistic water matrices, evaluating by-product toxicity, and developing cost-effective hybrid systems. Advancing these technologies is critical to reducing the environmental burden of ICMs and safeguarding aquatic ecosystems and public health. Full article

In this study, we present the synthesis of TiO₂ nanomaterials doped with different mol% cobalt, prepared by the sol–gel method for CO₂ reduction using UV light. The nanomaterials were calcined at 400 °C for 4 h. Characterization of the nanomaterials was performed using XRD-Rietveld refinement, XPS, Raman spectroscopy, diffuse reflectance spectroscopy (DRS), SEM-EDS, TEM-HRTEM, BET area, photoluminescence, and electrochemical techniques. The results show that the incorporation of cobalt into TiO₂ modifies the structural properties, binding energies, and oxygen vacancy generation, it undergoes a shift towards the visible region, the recombination of charge carriers decreases, and the BET area is slightly modified. The photoreduction of CO₂ with the highest production of methane and ethane is with 1% mol% of cobalt in TiO₂, exhibiting values 3 and 14 times higher with respect to TiO₂, which is attributed to the efficiency in the separation of photogenerated species (e⁻/h⁺) as a consequence of the generation of energetic states that function as an electron trap and thus improve the photocatalytic activity for the photoreduction of CO₂. Full article

In this study, an electrochemical valorization strategy on liquid byproducts from hazelnut shell gasification was developed to couple waste remediation with energy-efficient hydrogen production. The aqueous phase, rich in organic compounds, is processed in an anion exchange membrane (AEM) cell, where pure hydrogen evolved at the cathode while organic pollutants are oxidized at the anode. First, the feedstock is thoroughly characterized using gas chromatography–mass spectrometry (GC-MS), identifying a complex matrix of water-soluble aromatic compounds such as phenols, catechols, and other aromatics compounds, with concentrations reaching up to 2.9 g/kg for catechols. Then, the electro-reforming process is optimized using Nickel oxide–hydroxide (Ni(O)OH) electrodes with a loading of 0.75 mg/cm². This methodology relies on the favorable thermodynamics of organic oxidation, which requires a lower onset potential (0.4 V) compared to the oxygen evolution reaction (OER) observed in the alkaline control (0.52 V), and the low overpotential of the Nickel oxide–hydroxide electrode towards the oxidized species. Consequently, the organic load undergoes progressive oxidation into hydrophilic and less bioaccumulating species and carbon dioxide, allowing for the simultaneous generation of pure hydrogen at the cathode at a reduced cell voltage. Elevated stability was observed, with a substantial abatement—78% of the initial organic load—of organic compounds achieved over 80 h at a fixed cell voltage of 0.5 V, and a specific energy consumption for hydrogen production of $38.5 \mathrm{M}\mathrm{J}\cdot {\mathrm{k}\mathrm{g}}_{{\mathrm{H}}_2}^{-1}$. This represents a step forward in the development of technologies that reduce the energy intensity of hydrogen generation while valorizing biomass gasification residues. Full article

Halide perovskites have many advantages in environmental remediation. The photocatalytic performance of halide perovskites is often hindered by low specific surface area and rapid photogenerated carrier recombination. The aim of this work is to prepare a green, novel photocatalyst in the form of biochar-anchored Cs₃Bi₂Br₉ perovskite composites. The rose-petal-derived biomass carbon (RC) provides adsorption sites and high electrical conductivity, while the perovskite Cs₃Bi₂Br₉ can efficiently capture visible right and degrade pollutants, and the reciprocal effect can enhance the photocatalytic efficiency of the composite. The results of scanning electron microscopy (SEM) showed the Cs₃Bi₂Br₉ particles were loaded on the surface of RC. Compared with bare Cs₃Bi₂Br₉, Cs₃Bi₂Br₉/RC composite has a more perfect structure, higher specific surface area, enhanced ability to absorb visible light, and reduced bandgap value. As visible-light-driven photocatalysts, the prepared Cs₃Bi₂Br₉/RC composites can enhance the removal efficiency of Rhodamine B. The Cs₃Bi₂Br₉/RC–0.2 composite displays the highest degradation efficiencies for RhB (10 mg/L), reaching 98% within 60 min. And the rate constant (k) is 1.9 times that of bare Cs₃Bi₂Br₉. The results of electrochemical impedance spectroscopy (EIS) show that the interaction between RC and Cs₃Bi₂Br₉ speeds up charge carrier separation and transfer. During photocatalytic process, holes (h⁺) and superoxide radicals (·O₂⁻) played major roles. The composites also showed excellent stability. It is meaningful to deal with a large number of withered rose petals to make them high-value products. This work not only provides a guideline for the construction of perovskite composites materials but also shows the promising prospects of biochar composites in deep treatment for contaminated water. Full article

This work investigates the corrosion behavior of 18%Ni high-strength steel (00Ni18Co-8Mo5TiAl, solution-treated at 820 °C for 3 h and aged at 480 °C for 3 h) in NaCl solutions with 1%, 3.5%, and 6% chloride ions, as well as chloride ions’ effect on passive film properties. The corrosion process was systematically studied via chemical immersion tests (GB/T 17897-1999, 144 h, solution-to-sample contact area ratio 20:1) and electrochemical methods, including EIS (frequency range: 100 kHz–0.01 Hz) and Tafel polarization curves (scan rate: 10 mV/min). Passive film evolution was analyzed via Mott–Schottky curves (fixed frequency: 1000 Hz, scanning potential: −1 V to 1 V vs. SCE). Microstructural observations show the steel exhibits pitting corrosion in chloride environments, with corrosion products transforming from loose outer α-FeOOH/γ-FeOOH to dense inner Fe₃O₄/β-FeOOH. These dense products inhibit anodic reactions. Electrochemical results reveal polarization resistance decreases and corrosion current density rises with increasing chloride concentration. Mott–Schottky curves indicate that flat band potential increases from −0.2177 V to −0.1258 V with rising chloride concentration, increasing point defects in the passive film and weakening its self-healing ability. Full article

Given the potential hazards of enrofloxacin (ENR) residues to human health, establishing an accurate, rapid, and stable detection method is of importance. To enable the direct detection of ENR, an electrochemical sensor was constructed in this study. N- and S-doped carbon quantum dots (CQDs) with peroxidase-like activity were prepared using DL-malic acid, L-alanine, and L-cysteine as precursors and compounded with a tetrakis (4-carboxyphenyl) porphyrin (TCPP) and Fe(NO₃)₃·9H₂O to make novel N/S CQDs@Fe-TCPP composite carbon-based nanozymes to construct an electrochemical sensor, and the electrochemical behavior was investigated. Under optimal experimental conditions, the sensor exhibited a linear current response to ENR concentrations in the range of 1–1300 nM (I (μA) = 0.0106c (nM) + 2.9861, R² = 0.9962), with a calculated detection limit of 0.872 nM (S/N = 3). The recovery rate of this sensor in actual milk samples ranged from 99.02% to 100.9%. The reproducibility experiments demonstrated the high precision of the method, with a relative standard deviation (RSD) of 1.27%. Stability testing revealed a peak current retention rate of 93.51% on day 21, indicating excellent system stability. These findings indicate that the sensor shows great capability for ENR detection in food products. Full article

This study established a marine atmospheric corrosion prediction model by comparing the corrosion behavior of 7075 aluminum alloy in neutral salt spray tests and outdoor exposure tests conducted in the coastal atmosphere of Hainan. The results show that severe rusting occurred after 96 h of neutral salt spray testing, with loose white cluster-like corrosion products mainly composed of Al(OH)₃ and Al₂O₃. The thickening of the corrosion product layer slowed down the corrosion process, following a nonlinear power-law kinetic relationship. In the later stage, potential dropped sharply due to product layer spallation, and recovered as new corrosion products formed, confirming that the stability of the product layer is critical for protection. Under coastal atmospheric exposure, the composition of corrosion products was similar to that observed in the salt spray test, but the actual corrosion rate was affected by environmental dynamic equilibrium. The acceleration factor of the neutral salt spray test corresponding to the same corrosion amount in the Hainan marine atmosphere exhibited a declining trend, reflecting that differences in the protective nature of the corrosion product layer were influenced by environmental factors. Electrochemical analysis indicated that both tests showed similar current–potential synergistic variation mechanisms dominated by product layer stability. In summary, while the neutral salt spray test effectively simulates the chloride-induced corrosion mechanism in marine atmospheres, its kinetic model cannot directly predict real corrosion behavior through a simple acceleration factor, as environmental complexity must be considered. Full article