Search Results (75)

Two-component dental materials are commonly used by the dentist for various applications (cementation of indirect restorations, filling of a cavity without layering, etc.). These materials are cured by redox polymerization. The (hydro)peroxide/thiourea/copper salt redox initiator system is well established and can be found in a wide range of commercially available dental materials. The thiourea is a key component of the initiator system. This study explores the influence of the nature of the thiourea reducing agent on the reactivity and efficiency of redox initiator systems. In this work, six different thiourea structures were investigated, in combination with copper(II) acetylacetonate and cumene hydroperoxide (CHP), to understand their impact on polymerization kinetics and mechanical properties of methacrylate-based materials. Various experimental techniques, including mass spectrometry (MS) and spectroscopic analyses, were employed to elucidate the underlying mechanisms governing these redox systems. The results highlight that thiourea plays a dual role, acting both as a reducing agent and as a ligand in copper complexes, affecting radical generation and polymerization efficiency. Structural modifications of thiourea significantly influence the initiation process, demonstrating that reactivity is governed by a combination of factors rather than a single property. Self-cure dental flowable composites exhibiting excellent flexural strength (>100 MPa) and modulus (>6000 MPa) were obtained using hexanoyl thiourea, N-benzoylthiourea, or 1-(pyridin-2-yl)thiourea as a reducing agent. The adjustment of the Cu(acac)₂ enables to properly set the working time in the range of 100 to 200 s. These findings provide valuable insights into the design of the next generation of redox initiating systems for mild and safe polymerization conditions. Full article

The fatigue resistance of cement-stabilized macadam (CSM) plays a vital role in ensuring the long-term durability of pavement structures. However, limited cementitious material (CM) content often leads to high packing voids, which significantly compromise fatigue performance. Existing studies have rarely explored the coupled mechanism between pore structure and fatigue behavior, especially in the context of solid-waste-based CMs. In this study, a cost-effective alkali-activated sludge gasification slag (ASS) was proposed as a sustainable CM substitute for ordinary Portland cement (OPC) in CSM. A dual evaluation approach combining cross-sectional image analysis and fatigue loading tests was employed to reveal the effect pathway of void structure optimization on fatigue resistance. The results showed that ASS exhibited excellent cementitious reactivity, forming highly polymerized C-A-S-H/C-S-H gels that contributed to a denser microstructure and superior mechanical performance. At a 6% binder dosage, the void ratio of ASS–CSM was reduced to 30%, 3% lower than that of OPC–CSM. The 28-day unconfined compressive strength and compressive resilient modulus reached 5.7 MPa and 1183 MPa, representing improvements of 35.7% and 4.1% compared to those of OPC. Under cyclic loading, the ASS system achieved higher energy absorption and more uniform stress distribution, effectively suppressing fatigue crack initiation and propagation. Moreover, the production cost and carbon emissions of ASS were 249.52 CNY/t and 174.51 kg CO₂e/t—reductions of 10.9% and 76.2% relative to those of OPC, respectively. These findings demonstrate that ASS not only improves fatigue performance through pore structure refinement but also offers significant economic and environmental advantages, providing a theoretical foundation for the large-scale application of solid-waste-based binders in pavement engineering. Full article

This study addresses the constitutive relationship of the welded coarse-grained heat-affected zone (CGHAZ) in 80-mm-thick DH36 marine steel plates. By integrating quasi-static tensile testing, digital image correlation (DIC) technology, and metallographic analysis, we systematically investigated the mechanical property differences and underlying mechanisms between the CGHAZ and base metal (BM). High-precision DIC technology enabled strain field characterization at the microscale in the CGHAZ, while the Ramberg-Osgood model was adopted to establish a dual-material constitutive equation. The results demonstrate that grain coarsening induced by welding thermal cycles significantly influenced the mechanical responses: the CGHAZ exhibited enhanced tensile strength but reduced plastic compatibility due to decreased grain boundary density. Notably, gradient differences in elastic modulus (CGHAZ: 184 GPa vs. BM: 213 GPa) and yield strength (CGHAZ: 363 MPa vs. BM: 373 MPa) between the BM and CGHAZ necessitate strict differentiation in engineering design. This work overcomes the limitations of oversimplified CGHAZ properties in conventional design approaches, providing a novel methodology for strength assessment and lightweight design of marine structures. The findings offer critical theoretical insights and practical guidelines for enhancing the reliability of offshore engineering equipment. Full article

Medical titanium alloy Ti-6Al-4V (TC4) is widely used as a surgical implant material in biomedical fields owing to its superior biocompatibility, corrosion resistance, and mechanical performance, particularly for osseous integration applications. However, long-term contact of medical titanium-based implants with human soft tissues may induce infection and inflammation. To address these limitations, a drug-loading gel was designed to be synthesized on a TC4 surface to improve biointegration. Considering the critical regulatory roles of temperature and pH in physiological environments, this study synthesized a dual-responsive hydrogel using the temperature-sensitive monomers 2-(2-methoxyethoxy)ethyl methacrylate (MEO₂MA) and oligoethylene glycol methacrylate (OEGMA) and the pH-sensitive monomer diethylaminoethyl methacrylate (DEAEMA), employing stereocomplexed polylactic acid as a physical crosslinker and N,N′-methylenebisacrylamide (MBA) as a chemical crosslinker. A polydopamine-based initiator was synthesized via dopamine functionalization with 2-bromoisobutyryl bromide (BIBB). The amphiphilic co-network hydrogel was grafted onto a modified TC4 surface through atom transfer radical polymerization (ATRP). Integration of the drug-loading gel and TC4 gives the implant an “active therapeutic” function by localized drug release. The results demonstrated that the energy storage modulus of the double-crosslinked gel matched that of human soft tissues. The gels exhibited efficient drug release. Full article

In this study, polyvinyl alcohol (PVA) films were reinforced with lignocellulosic nanofibers (LCNFs) extracted from bamboo shoot shells using a choline chloride-based deep eutectic solvent (DES). A filler loading of 10 wt% was identified as the optimal condition for enhancing film performance. To improve interfacial compatibility between the PVA matrix and LCNFs, three surface modification treatments were applied to the nanofibers: hydrochloric acid (HCl) hydrolysis, citric acid (CA) crosslinking, and a dual modification combining both methods (HCl&CA). Among all formulations, films incorporating dual-modified LCNF at 10 wt% loading exhibited the most significant improvements. Compared to neat PVA, these composites showed a 79.2% increase in tensile strength, a 15.1% increase in elongation at break, and a 33.1% enhancement in Young’s modulus. Additionally, thermal stability and barrier properties were improved, while water swelling and solubility were reduced. Specifically, the modified films achieved a thermal residue of 9.21% and the lowest degradation rate of 10.81%/min. Water vapor transmission rate and oxygen permeability decreased by 18.8% and 18.6%, respectively, and swelling and solubility dropped to 14.26% and 3.21%. These results highlight the synergistic effect of HCl hydrolysis and CA crosslinking in promoting uniform filler dispersion and strong interfacial adhesion, offering an effective approach to valorizing bamboo shoot shell waste into high-performance, eco-friendly packaging materials. Full article

In natural materials, thermal expansion is typically positive, and negative thermal expansion is rarely observed. The tunable thermal expansion properties of mechanical metamaterials offer a promising solution to challenges caused by rapid temperature fluctuations. Therefore, this study proposes a dual-material double-trapezoidal hexagonal mechanical metamaterial (DTH), and derives the thermoelastic equations that build the relationship between temperature, external force, and displacement. Through theoretical analysis and numerical simulation, the intrinsic mechanism between the CTE and geometric parameters of DTH is revealed. Through the synergistic effect of dual materials and structural design, this metamaterial not only achieves thermal expansion regulation but also enhanced lightweight performance. The results show that by controlling the geometric parameters of DTH, the adjustment of effective CTE and elastic modulus can be realized, and the metamaterial composed of positive CTE materials can achieve a range of thermal expansion behaviors, including near-zero CTE and negative CTE. The tunable thermal expansion range extends from +39.92 ppm/°C to −3640.6191 ppm/°C. The metamaterials proposed in this study are not only superior to traditional materials in terms of thermal expansion performance but also have the characteristics of light weight and simple structure. This multifunctional material achieves higher performance and adaptability in applications. Full article

Dynamic behavior is prevalent in biological and condensed matter systems at the nano- and mesoscopic scales. Typically, we capture images as “snapshots” to demonstrate the evolution of a system, and coherent X-ray diffraction imaging (CDI), as a lensless imaging technique, provides a nanoscale resolution, allowing us to clearly observe these microscopic phenomena. This paper presents a new dynamic CDI method based on zone-plate optics aiming to overcome the limitations of existing techniques in imaging fast dynamic processes by integrating the spatio-temporal dual constraint with a probe constraint. In this method, the modulus-enforced probe constraint and the temporal correlation of the dynamic sample low-frequency information are exploited and combined with an empty static region constraint in the dynamic sample. Using this method, we achieved a temporal resolution of 20 Hz and a spatial resolution of 13.2 nm, which were verified by visualized experimental results. Further comparisons showed that the reconstructed images were consistent with the ptychography reconstruction results, confirming the accuracy and feasibility of the method. This work is expected to provide a new tool for materials science and mesoscopic life sciences, promoting a deeper understanding of complex dynamic processes. Full article

Rational waste management is crucial for the effective implementation of the circular economy (CE) and the achievement of Sustainable Development Goals (SDGs). Ceramic waste, which takes thousands of years to decompose in the natural environment, can be recycled into construction materials. This approach offers dual environmental benefits: reducing ceramic waste disposal and minimizing the exploitation of natural aggregate deposits. This study examines the recycling of sanitary ceramic waste, including items such as washbasins, toilet bowls, urinals, bidets, and bathtubs, into alternative aggregates for concrete mixtures. After grinding and separating the ceramic cullet into specific fractions, it becomes a viable substitute for natural aggregates. Concrete samples were tested with varying water-cement ratios (0.3 and 0.4) and recycled ceramic aggregate contents (15%, 30%, and 45%). These results were compared to those of samples made solely with natural aggregates. The samples underwent compressive strength tests to determine concrete class and were exposed to elevated temperatures (150 °C, 300 °C, 550 °C, and 750 °C). Additional analyses measured the secant modulus of elasticity and selected aggregate properties. The findings demonstrate that high-quality concrete can be produced while promoting circular economy principles by reducing waste and preserving natural resources. Full article

Composite materials have experienced a significant increase in demand over the past five decades. This growing usage has led to a considerable production of waste, particularly from prepreg scraps, which can account for up to 35% of the purchased material. This paper explores the recycling of prepreg scraps by cutting them into smaller patches and reassembling them into new sheets. The study follows a dual approach: mechanical testing on two different types of samples is presented, along with numerical modeling strategies designed to capture not only the mechanical behavior of the new recycled material but also the failure modes of the samples. The experimental results demonstrate the feasibility of the proposed technique, with samples made from prepreg scraps retaining 85%, 57%, and 78% of the original flexural modulus, strength, and interlaminar strength, respectively. The numerical models not only fit closely to the experimental data but also successfully predict the failure modes of the new material under the two different loading conditions. The primary highlights of this work lie in (i) its innovative approach to recycling prepreg scraps, which is capable of successfully recovering material otherwise sent to landfill; (ii) an ordinated and easy-to-automate recovery process; and (iii) in the modeling strategies of the new material. The study eventually proposes the development of an “equivalent lamina” made of scrap material that can be used in standard lamination processes to manufacture components with load-bearing capabilities. Full article

The printing precision of hydrogels directly determines the mechanical and electrical performance of scaffolds. In this study, poly(3,4-ethylenedioxythiophene)-poly (styrenesulfonate) (PEDOT:PSS) was directly compounded with glycidyl methacrylate-modified silk fibroin (Sil-MA) through a one-pot method to increase the solid content of the printing ink, enhancing its mechanical, electrical, and printability properties. A dual-network photo-curable conductive silk fibroin composite hydrogel (CDMA) was successfully prepared. The results show that the introduction of PEDOT:PSS significantly improved the conductivity of the hydrogel. (The bandgap decreased from 2.36 eV to 1.125 eV, and the maximum conductivity reached 0.534 S/m.) It also enhanced the microscopic 3D network density and mechanical properties of the hydrogel (compressive modulus up to 192 kPa). Moreover, the hydrogel demonstrated good stability during cyclic stability testing, providing a new approach to developing materials capable of high-precision printing with stable electrical performance. Full article

This study investigates the synergistic effects of incorporating modified zinc oxide–silica (ZnO-SiO₂) into tire waste (TW) and epoxidized natural rubber (ENR) blends, with a focus on crosslinking dynamics, mechanical reinforcement, and antibacterial activity. The addition of ZnO-SiO₂ significantly enhanced crosslink density, as evidenced by increased torque and accelerated cure rates. An optimal concentration of 10 phr was found to yield the highest performance. This optimal balance between chemical activation and mechanical reinforcement resulted in exceptional tensile properties, including notable improvements in Young’s modulus, tensile strength, and strain-induced crystallization (SIC). These enhancements were attributed to the strong interactions between ENR molecular chains and SiO₂ surfaces. However, excessive ZnO-SiO₂ concentrations caused filler agglomeration, which reduced both mechanical and antibacterial performances. An antibacterial analysis revealed a remarkable 99.9% bacterial reduction at 10 phr ZnO-SiO₂, attributed to the Zn²⁺ ion release and reactive oxygen species (ROS) generation, with sustained activity even after thermal aging. This durability underscores the composites’ potential for long-term applications. The findings establish ZnO-SiO₂ as a dual-functional filler that optimizes crosslinking, enhances mechanical properties, and provides durable antibacterial efficiency. These results highlight the potential of TW/ENR blends while offering critical insights into mitigating filler agglomeration to improve overall material performance. Full article

TC17 titanium alloy is widely used in the aviation industry for dual-performance blades, and linear friction welding (LFW) is a key technology for its manufacturing and repair. However, accurate evaluation of the mechanical properties of TC17−LFW joints and research on their joint fracture behavior are still not clear. Therefore, this paper used the finite element numerical simulation method (FEM) to investigate the mechanical behavior of the TC17−LFW joint with a complex micro−structure during the tensile processing, and predicted its mechanical properties and fracture behavior. The results indicate that the simulated elastic modulus of the joint is 108.5 GPa, the yield strength is 1023.2 MPa, the tensile strength is 1067.5 MPa, and the elongation is 1.98%. The deviations from measured results between simulated results are less than 2%. The stress and strain field studies during the processing show that the material located at the upper and lower edges of the joint in the WZ experiences stress and strain concentration, followed by the extending of the stress and strain concentration zone toward the center of the WZ. And finally, the strain concentration zone covered the entire WZ. The fracture behavior studies show that the material necking occurs in the TMAZ of TC17(α + β) and WZ, while cracks first appear in the WZ. Subsequently, joint cracks propagate along the TC17(α + β) side of the WZ until fracture occurs. There are obvious tearing edges formed by the partial tearing of the WZ structure in the simulated fracture surface, and there are fracture surfaces with different height differences at the center of the joint crack, indicating that the joint has mixed fracture characteristics. Full article

In recent years, the demand for orthopedic implants has surged due to increased life expectancy, necessitating the need for materials that better mimic the biomechanical properties of human bone. Traditional metal implants, despite their mechanical superiority and biocompatibility, often face challenges such as mismatched elastic modulus and ion release, leading to complications and implant failures. Polyetheretherketone (PEEK), a semi-crystalline polymer with an aromatic backbone, presents a promising alternative due to its adjustable elastic modulus and compatibility with bone tissue. This study explores the functionalization of sandblasted 3D-printed PEEK disks with the bioactive peptides Aoa-GBMP1α and Aoa-EAK to enhance human osteoblast response. Aoa-GBMP1α reproduces 48–69 trait of Bone Morphogenetic Protein 2 (BMP-2), whereas Aoa-EAK is a self-assembling peptide mimicking extracellular matrix (ECM) fibrous structure. Superficial characterization included X-ray photoelectron spectroscopy (XPS), white light interferometer analysis, static water contact angle (S-WCA), and force spectroscopy (AFM-FS). Biological assays demonstrated a significant increase in human osteoblast (HOB) proliferation, calcium deposition, and expression of osteogenic genes (RUNX2, SPP1, and VTN) on functionalized PEEK compared to non-functionalized controls. The findings suggest that dual peptide-functionalized PEEK holds significant potential for advancing orthopedic implant technology. Full article

This study aims to refine the ratio of alkali-activated steel slag (SS) to granulated blast furnace slag (GBFS)–cement-based grouting materials, with the dual objectives of cost reduction and performance enhancement. By employing single-factor experiments and response surface methodology (RSM), we have pinpointed the critical factors that influence the slurry’s performance and developed a regression model to assess the impact of these factors and their interplay. Our findings indicate that the compressive strength initially increases with higher SS content but subsequently declines. Additionally, an increase in alkali content and activator modulus is beneficial for strength improvement. However, beyond an alkali content of 8%, the 28-day strength is observed to decrease. Through meticulous model analysis, we have determined the optimal ratio to be 7.07% SS content, 7.82% alkali content, and an activator modulus of 1.8. The material’s performance at this ratio satisfies construction specifications. This research not only offers a cost-effective and high-performance grouting solution for geotechnical applications but also pioneers a novel approach to the resourceful utilization of solid waste materials, such as SS. Full article

This study investigates the impact of polyvinyl alcohol (PVA) fibers on the mechanical properties and durability of high-performance shotcrete (HPS). Results demonstrate that PVA fibers have a dual impact on the performance of HPS. Positively, PVA fibers enhance the tensile strength and toughness of shotcrete due to their intrinsic high tensile strength and fiber-bridging effect, which significantly improves the material’s splitting tensile strength, deformation resistance, and toughness, and the splitting tensile strength and peak strain have been found to be increased by up to 30.77% and 31.51%, respectively. On the other hand, the random distribution and potential agglomeration of PVA fibers within the HPS matrix can lead to increased air-void formations. This phenomenon raises the volume content of large bubbles and increases the average bubble area and diameter, thereby elevating the pore volume fraction within the 500–1200 μm and >1200 μm ranges. Therefore, these microstructural changes reduce the compactness of the HPS matrix, resulting in a decrease in compressive strength and elastic modulus. The compressive strength exhibited a reduction ranging from 10.44% to 15.11%, while the elastic modulus showed a decrease of between 8.09% and 12.67%. Overall, the PVA-HPS mixtures with different mix proportions demonstrated excellent frost resistance, chloride ion penetration resistance, and carbonation resistance. The electrical charge passed ranged from 133 to 370 C, and the carbonation depth varied between 2.04 and 6.12 mm. Although the incorporation of PVA fibers reduced the permeability and carbonation resistance of shotcrete, it significantly mitigated the loss of tensile strength during freeze–thaw cycles. The findings offer insights into optimizing the use of PVA fibers in HPS applications, balancing enhancements in tensile properties with potential impacts on compressive performance. Full article