Search Results (298)

Achieving accurate fit in implant-supported prostheses is critical for avoiding mechanical complications; however, the influence of digital manufacturing techniques and abutment designs on misfit and preload remains unclear. This study evaluated the impact of different manufacturing techniques (CAD-cast and 3D printing) and abutment connection types (engaging [E], non-engaging [NE]) on the misfit and preload of implant-supported cantilevered fixed dental prostheses (ICFDPs). Misfit was measured at six points using scanning electron microscopy, and preload was assessed via eight strain gauges placed buccally and lingually on four implants. Frameworks were torqued to 35 Ncm, retorqued after 10 min, and subjected to 200,000 cycles of loading. Mean preload values ranged from 173.4 ± 79.5 Ncm (PF) to 330 ± 253.2 Ncm (3DP). Preload trends varied depending on the abutment type and manufacturing technique, with the 3DP group showing higher preload in engaging (E) abutments, whereas the CAD-cast group showed the opposite pattern. Although preload values varied numerically, these differences were not statistically significant (p = 0.5). In terms of misfit, significant differences were observed between groups (p < 0.05), except between CAD-cast E (86.4 ± 17.8 μm) and 3DP E (84.1 ± 19.2 μm). Additionally, E and NE abutments showed significant differences in misfit within both CAD-cast and 3DP groups. Overall, 3DP frameworks showed superior fit over CAD-cast. These findings suggest that 3DP may offer improved clinical outcomes in terms of implant–abutment fit. Full article

Objective: To compare the effect of different bone augmentation procedures, namely, autogenous bone blocks (ABBs) versus guided bone regeneration (GBR), on patient-reported outcomes (PROMs). Methods: This systematic review was conducted according to the PRISMA guidelines. A MEDLINE, Embase, and Web of Science search was conducted by two independent reviewers in combination with a free-hand search in relevant journals until June 2025. Outcomes were PROMs to enhance our understanding of the evolution of these procedures. Results: The electronic search yielded 6291 articles. After title screening, 67 articles were further analyzed for abstract review, which resulted in 14 articles eligible for full-text reading. Six articles were finally included based on the exclusion and inclusion criteria with a total of 295 patients. The overall study quality was low, since only two RCTs could be included. One study demonstrated a high risk of bias. Different PROMs were examined and compared such as pain, edema, neurosensory disturbance, Patient-Reported Predominant Symptom, OHIP-14, postoperative analgesic usage, willingness to repeat, and likelihood to recommend. Meta-analysis was not achievable due to a lack of direct comparisons and heterogeneity in terms of PROMs. Evaluation points varied between pretreatment and up to nearly 10-years of follow-up. Conclusions: Despite significant heterogeneity and reporting, this systematic review concluded that ABB and GBR are well-tolerated procedures. Trends such as transient postoperative pain and swelling with a minor occurring of neurosensory disturbances were reported in a few studies. Overall, a good perception of postoperative recovery was reported for both treatment modalities. Good quality of life was noted related to GBR procedures. Patient-reported outcomes were only analyzed for patients who completed the entire follow-up period. This may introduce bias, as patients who dropped out and were more likely to experience complications were not represented, potentially resulting in a more favorable portrayal of the outcomes. Further well-conducted prospective studies with a long follow-up are needed for an evidence-based evaluation and comparison of PROMs for these procedures. Full article

Titanium (Ti) alloys, renowned for their exceptional physicochemical properties and high biocompatibility, are widely utilized in orthopedic and dental implants; however, their lack of intrinsic antimicrobial activity significantly increases the risk of implant-associated infections, often leading to severe complications and implant failure. Developing antimicrobial coatings on Ti implants is therefore a promising strategy. In this study, tannic acid (TA) coatings were deposited by immersing Ti alloy surfaces—beforehand activated by low-temperature oxygen plasma—in TA solutions at 2, 5, and 8 wt%. Coatings were characterized by scanning electron microscopy (SEM), X-ray photoelectron spectroscopy (XPS), water contact angle (WCA) measurements, and Folin–Ciocalteu release assays, and their cytocompatibility and antimicrobial performance were assessed in vitro. Surface characterization confirmed the formation of uniform TA layers, and WCA measurements indicated enhanced hydrophilicity relative to unmodified Ti (82.0° ± 3.6°), with values decreasing as TA concentration increased (from 35.2° ± 3.2° for 2% TA to 26.6° ± 2.8° for 8% TA). TA release profiles exhibited an initial burst followed by sustained diffusion, with 5% and 8% coatings releasing significantly more TA than 2% coatings. Coatings containing ≥ 5% TA demonstrated bactericidal activity—achieving > 2-log₁₀ reductions—against Escherichia coli, Staphylococcus aureus, and Pseudomonas aeruginosa, and also showed inhibitory effects against Candida albicans. Importantly, all coatings remained cytocompatible with NIH/3T3 fibroblasts, and the released tannic acid hydrolysis products (particularly gallic acid) enhanced their proliferation. These findings indicate that plasma-activated titanium surfaces coated with ≥5 wt% tannic acid impart broad-spectrum antimicrobial efficacy and hold potential to reduce implant-associated infections and improve long-term outcomes in orthopedic and dental applications. Full article

Background and Clinical Significance: The retreatment of failed dental implants remains a challenging clinical scenario, particularly when complicated by peri-implantitis and as sociated bone loss. Successful management requires a comprehensive and predictable approach that addresses both hard and soft tissue deficiencies. Case Presentation: This case report illustrates a fully digital, prosthetically driven workflow for the rehabilitation of a posterior mandibular site following implant failure. A 44-year-old female patient underwent removal of a failing implant and adjacent tooth due to advanced peri-implantitis and periodontitis. After healing, a digital workflow—including intraoral scanning, cone-beam computed tomography (CBCT), and virtual planning—was employed to design and fabricate a customized CAD/CAM titanium mesh for vertical guided bone regeneration. The grafting procedure utilized a composite mixture of autogenous bone and anorganic bovine bone (A-Oss). After nine months of healing, two implants with a hydrophilic surface (SOI) were placed using a fully guided surgical protocol (OneGuide system). Subsequent soft tissue grafting and final prosthetic rehabilitation with monolithic zirconia restorations resulted in stable functional and aesthetic outcomes. Conclusions: This case highlights how the integration of modern digital technologies with advanced regenerative procedures and innovative implant surfaces can enhance the predictability and long-term success of implant retreatment in compromised posterior sites. Full article

Peri-implantitis is an inflammatory disease-causing bone loss around dental implants, often requiring reconstructive surgical therapies to reduce probing depth and regenerate bone. However, such surgeries are frequently complicated by postoperative issues. This retrospective case series aimed to identify the main postoperative complications following the reconstructive treatment of peri-implant bone defects in peri-implantitis patients. Data from 14 patients with 21 affected implants were analyzed, including demographics, oral hygiene, surgical techniques, and complications such as wound dehiscence, membrane exposure, and infections. Wound dehiscence was measured using Image J^® software version 1.54. Descriptive and bivariate analyses were performed. The results showed that 11 implants (52.4%; 95% confidence interval (95%CI): 29% to 76%) in nine patients (57.1%; 95%CI = 27% to 87%) developed soft tissue dehiscence after one week, with membrane exposure observed in 4 implants. Dehiscence was significantly associated with mandibular implant location (p = 0.003), poor interproximal hygiene (p = 0.008), and membrane exposure (p = 0.034). No postoperative infections were recorded. In conclusion, more than half of peri-implantitis patients undergoing reconstructive surgery experience wound dehiscence, particularly in cases involving mandible, poor hygiene, and membrane exposure. This complication might compromise bone regeneration and reduce the treatment success rate. These results should be interpreted cautiously due to study design limitations (retrospective design, lack of a control group, and small sample size). Full article

Background: Dynamic computer-aided navigation systems are a real-time motion tracking technology widely applied in oral implantology and endodontics to enhance precision and reduce complications. However, their reliability, accuracy, and usability in dentoalveolar surgery and maxillary bone augmentation remain underinvestigated. Methods: A systematic review following PRISMA guidelines was conducted and registered on PROSPERO (CRD42024610153). PubMed, Scopus, Web of Science, and Cochrane Library databases were searched until October 2024 to retrieve English eligible studies, without restrictions on the publication year, on dynamic computer-assisted navigation systems in dentoalveolar and bone augmentation surgeries. Exclusion criteria were surgery performed without dynamic computer-assisted navigation systems; dental implant placement; endodontic surgery; and maxillo-facial surgery. The outcomes were reliability, accuracy, post-operative course, surgical duration, complications, patient- and clinician-reported usability, acceptability, and satisfaction. Included studies were qualitatively synthetized and judged using dedicated tools for the different study designs. Results: Twenty-nine studies with 214 patients were included, showing high reliability in dentoalveolar and bone augmentation surgeries comparable to or superior to freehand surgeries, higher accuracy in dentoalveolar surgery compared to maxillary bone augmentation, and reduced complication rates across all surgeries. While overall surgical duration slightly increased due to technology installation, operative time was reduced in third molar extractions. Patient-reported outcomes were poorly investigated. Clinician-reported outcomes were mixed, but difficulties in the differentiation of soft tissue from hard tissue were recorded, especially in sinus floor elevation. Conclusions: Dynamic computer-assisted navigation systems enhance accuracy and safety in dentoalveolar and bone augmentation surgery. Further studies are needed to assess the underinvestigated patient-reported outcomes and standardize protocols. Full article

Background/Objectives:Titanium implant surface modifications enhance osseointegration and prevent microbial colonization, improving implant longevity. Antimicrobial coatings, particularly cerium- and bismuth-doped hydroxyapatite (CeHAp and BiHAp), have gained attention for reducing infection-related complications. This study evaluates the antimicrobial activity of CeHAp and BiHAp coatings on CpTi compared to untreated CpTi in artificial saliva at pH levels of 4.5, 6.5, and 8. Methods: Antibacterial efficacy against Staphylococcus aureus (S. aureus), Escherichia coli (E. coli), and Candida albicans (C. albicans) was assessed using the broth dilution method. Titanium rods coated with test compounds were incubated in inoculated nutrient broth, and microbial inhibition was determined via optical density at 600 nm. A statistical analysis was performed using the Kruskal–Wallis ANOVA test, the median and Interquartile Range were determined for the variables, and a Dwass–Steel–Critchlow–Fligner intergroup pairwise comparison was conducted. Results: The results showed that both the CeHAp and BiHAp coatings demonstrated significant antimicrobial activity against S. aureus (OD = 0.01) at pH 6.5, which was more pronounced than the activity observed against E. coli (OD = 0.05), with the difference being statistically significant (p = 0.001). The least antimicrobial activity was observed against C. albicans (0.21) at pH 8 (p = 0.001). Conclusion: These findings highlight the pH-dependent effectiveness of BiHAp and CeHAp coatings in inhibiting microbial growth. Their application on titanium implants may enhance antimicrobial properties, contributing to improved dental implant success and broader biomedical applications. Full article

(1) Background: The present study was carried out to provide a state-of-the-art review of the prosthodontic factors related to customized subperiosteal implants (CSIs), and to offer clinical guidelines in this regard. (2) Methods: An expert consensus meeting was held in July 2024 in Santpedor (Manresa, Spain) to establish the most relevant clinical guidelines. (3) Results and (4) Conclusions: An interdisciplinary approach including surgeons, prosthodontists, bio-medical engineers and dental technicians, integrating both biological and mechanical considerations when designing CSI rehabilitations, is very important. While the reported survival rate of CSIs appears promising, their long-term performance beyond 5 years remains insufficiently documented. Thus, CSIs are a viable treatment option for patients with insufficient bone to place conventional implants, but there is a clear need to identify and analyze delayed-onset complications associated with these devices. The findings and their broader implications should be thoroughly examined, and potential future research directions should be highlighted. Full article

Background/Objectives: The infraorbital canal (IOC) is a critical anatomical structure that passes through the anterior surface of the maxilla and opens at the infraorbital foramen, containing the infraorbital nerve, artery, and vein. Accurate localization of this canal in maxillofacial, dental implant, and orbital surgeries is of great importance to preventing nerve damage, reducing complications, and enabling successful surgical planning. The aim of this study is to perform automatic segmentation of the infraorbital canal in cone-beam computed tomography (CBCT) images using an artificial intelligence (AI)-based model. Methods: A total of 220 CBCT images of the IOC from 110 patients were labeled using the 3D Slicer software (version 4.10.2; MIT, Cambridge, MA, USA). The dataset was split into training, validation, and test sets at a ratio of 8:1:1. The nnU-Net v2 architecture was applied to the training and test datasets to predict and generate appropriate algorithm weight factors. The confusion matrix was used to check the accuracy and performance of the model. As a result of the test, the Dice Coefficient (DC), Intersection over the Union (IoU), F1-score, and 95% Hausdorff distance (95% HD) metrics were calculated. Results: By testing the model, the DC, IoU, F1-score, and 95% HD metric values were found to be 0.7792, 0.6402, 0.787, and 0.7661, respectively. According to the data obtained, the receiver operating characteristic (ROC) curve was drawn, and the AUC value under the curve was determined to be 0.91. Conclusions: Accurate identification and preservation of the IOC during surgical procedures are of critical importance to maintaining a patient’s functional and sensory integrity. The findings of this study demonstrated that the IOC can be detected with high precision and accuracy using an AI-based automatic segmentation method in CBCT images. This approach has significant potential to reduce surgical risks and to enhance the safety of critical anatomical structures. Full article

Background: Eighty-five percent of peri-implant malignancies are oral squamous cell carcinomas (OSCCs), and most of them are misdiagnosed as peri-implantitis because of their clinical and radiological presentation; few studies have focused on addressing and solving the diagnostic issues related to peri-implant OSCCs. Objectives: The study aimed to describe the clinicopathological features of peri-implant OSCCs and to report the staging issues related to the diagnosis of these lesions. Methods: This retrospective cohort study included patients who received a diagnosis of and treatment for peri-implant OSCCs at the Unit of Dentistry of the “Aldo Moro” University of Bari (Italy) from 2018 to 2024. By using descriptive statistics, the authors highlighted the diagnostic issues related to the clinical presentation, radiological features, and histology of peri-implant OSCCs. Results: A total of 13 women and 8 men with a mean age of 70.6 ± 11.7 years met the inclusion criteria; the medical history of the participants showed potentially malignant disorders (OPMDs) in 52.4% of patients, whereas 14.3% had already developed an OSCC. The patients showed 24 peri-implant OSCCs; the clinical presentation was leuko-erythroplakia-like (41.7%) or erythroplakia-like (58.3%), thus simulating peri-implantitis; in addition, 52.0% of dental implants involved had a probing pocket depth ≥ 10 mm, further mimicking peri-implantitis. Panoramic radiograms and cone beam computed tomography were of little use in studying bundle bone–implant interfaces; in particular, the tomography showed circumferential bone resorption only in peri-implantitis-like OSCCs. In total, 91.6% of histological examinations of OSCCs showed peri-implantitis-like inflammation; early-stage lesions (pTNM I-II) accounted for 33.3%, whereas late-stage lesions (pTNM III-IV) accounted for 66.7%; lymph nodal metastases occurred in 25.0% and 62.5%, respectively. The mean follow-up was 3.4 ± 1.0 years; all patients with OPMDs had poorly differentiated tumors and thus showed a worse prognosis than those without OPMDs (mean disease-free survival of 15.5 ± 7.7 months and 44.7 ± 12.1 months, respectively). Conclusions: The results of the study showed that peri-implant OSCCs occurred most frequently in patients with OPMDs or previous OSCC; in addition, peri-implant OSCCs required demolition rather than conservative excision, and the prognosis of patients strictly depended on the grade of the cancer. In the authors’ experience, the clinical–radiological presentation simulating peri-implantitis was the feature that concurred most in complicating the diagnosis of those tumors. Full article

Background: While dental implants have become a reliable solution for tooth loss, their long-term success is increasingly challenged by biological and technical complications such as impact fracture and peri-implantitis. These complications significantly impact implant longevity and patient satisfaction. Aim: This consensus conference aimed to identify and standardize clinical guidelines to prevent implant fractures and peri-implant diseases based on current evidence and expert opinions. Methods: A panel of 10 expert clinicians and researchers in prosthodontics participated in the Osstem Global Consensus Meeting. This paper focuses on the prosthetic division. A structured literature review was conducted, and evidence was synthesized to formulate consensus-based clinical recommendations. Participants answered structured questions and discussed discrepancies to achieve consensus. Results: The panel reached consensus on several key prosthetic risk factors, including (1) the role of biomechanical overload in implant fracture, (2) the impact of emergence profile design on peri-implant tissue stability, (3) the influence of implant positioning and connection geometry on marginal bone loss, and (4) the importance of occlusal scheme and restorative material selection, particularly in high-risk patients such as bruxers. Guidelines to prevent implant fracture and peri-implantitis were developed, addressing these factors with practical preventive strategies. Conclusions: Despite the limitations of narrative methodology and reliance on retrospective data and expert opinion, this consensus provides clinically relevant guidelines to aid in the prevention of mechanical failures and peri-implant diseases. The recommendations emphasize prosthetically driven planning, individualized risk assessment, and early intervention to support long-term implant success. Full article

Background and Clinical Significance: To describe the effectiveness of alveolar ridge preservation under the radiological and histological analysis of a customized resorbable scaffold three-dimensionally printed with polycaprolactone (PCL) reinforced with a coating of a copolymer of polycaprolactone-block-polyethylene glycol (PCL–PEG) by electrospray. Case Presentation: A 62-year-old male with vertical root fractures of teeth #14 and #15. From the cone beam CT (CBCT) image, the scaffold root replicas were designed with the shape of the roots and printed with PCL coated with PCL–PEG by electrospray. The scaffold was inserted into the alveolar bone and maintained with a tension-free flap closure. After six months, a CBCT of the surgical site and histological analysis of a bone sample at the dental implant installation site were performed. After 6 months, the wound in tooth #14 was closed, clinically proving no adverse reaction or complications. The histological analysis of the bone sample showed new bone formation with lamellar structure, Haversian canal structure, and osteocyte spaces. However, the scaffold in tooth #15 was exposed and not osseointegrated, and it was covered with membranous tissue. Histologically, the sample showed tissue compatible with lax connective tissue with mixed inflammatory infiltrate. In tooth #14, the dental implant presented an insertion torque >35 Ncm and was rehabilitated three months after its installation. Conclusions: Three-dimensional printed PCL scaffolds showed the ability to regenerate vital and functional bone with osseointegration capability for maxillary bone regeneration and oral rehabilitation based on dental implants. A case of inadequate scaffold osseointegration accompanied by lax connective tissue formation is shown. Full article

It is widely recognized that excessive stress and/or strain can lead to peri-implant bone atrophy; therefore, the clinical success of dental implants is intrinsically related to their biomechanical behavior. This study evaluates the influence of the diameter, length, and material [Ti6Al4V (α+β Ti) and Ti35Nb7Zr5Ta (β-Ti)] of a novel cylindrical dental implant on stress and strain levels within maxillary bone of type II quality. The implant design aims to ensure an appropriate distribution of stresses and strains within the peri-implant bone structures (cortical and trabecular bones) while also facilitating surgical machining by requiring a simple, linear, and less expensive bone incision. This approach minimizes the risk of thermal necrosis, a common complication in osteotomies for conical implants that can lead to peri-implant bone loss. Using finite element analysis, stress and strain patterns were evaluated in the maxillary second premolar region under static delayed loading. The results reveal that the cortical bone strains remained below the critical threshold (0.003) to prevent resorption. In the trabecular bone, only larger diameter/length configurations satisfied the previous strain criterion. In all simulations, trabecular bone stress remained below 3 MPa, whereas cortical bone stress peaked at 78 MPa. Notably, the implant model with the largest diameter/length minimized stress and strain concentrations in type II bone when compared to smaller designs, thereby demonstrating its biomechanical advantage. Full article

Objectives: This study aims to investigate the underlying causes of dental implant failure, focusing on implant-related complications and associated risk factors. Understanding these factors will help improve treatment planning and enhance implant success rates. Methods: A retrospective case-control study was conducted using clinical, medical, surgical, and radiographic records of patients who underwent dental implant removal due to complications. Key factors analyzed included patient-related variables (age, gender, medical conditions, periodontal disease), implant-related factors (implant site, implant system, restoration status), and procedural aspects (previous surgical interventions and reasons for implant removal). Results: The findings revealed that implant type (p = 0.004) and type of restoration (p = 0.001) significantly influenced implant survival. Gender (p = 0.001), medical conditions, smoking status (p = 0.004), and restoration status (p = 0.005) were significantly associated with specific failure mechanisms. Lack of osseointegration (36.4%) and absence of primary stability (22.4%) were the predominant causes of implant failure. Prior surgical interventions (p = 0.001) and decisions for re-implantation (p = 0.005) significantly affected implant removal frequency. Conclusions: Implant survival is influenced by multiple factors, with implant type, restoration type, and gender playing key roles in failure outcomes. Patient-specific risk assessment, particularly regarding medical conditions and smoking, meticulous surgical technique, and appropriate prosthetic planning, is vital for improving implant longevity and minimizing failure rates. Full article

Background/Objectives: Subperiosteal implants (SPIs) were first used in the 1940s, but due to their complications and the rise of dental implants, they were discontinued. Thanks to new technologies and new materials, nowadays they are being used again and studied as a treatment for severe bone defects. This review analyzes the clinical results—survival rates and complications—of SPIs used to support full arch rehabilitations of severely resorbed maxillae and mandibles, comparing the outcomes resulting from implant placement conducted in one or two surgical interventions. Methods: An automated search was conducted in four databases (Medline/Pubmed, Scopus, Web of Science, and Cochrane Library), as well as a manual search for relevant clinical articles published before 28 February 2025. The review included human studies with at least four patients, in which SPIs were placed to restore full-arch edentulous maxillae and mandibles. Quality of evidence was evaluated using the Newcastle–Ottawa Quality Assessment Scale and the Joanna Briggs Institute Critical Appraisal tool. Results: A total of 14 studies met the inclusion criteria and were included for analysis, including 958 patients and 973 SPIs. The survival rate was 100% when one surgical intervention was performed and 85% when two interventions were performed after 4–38 months and 3–22 years follow-up, respectively. Conclusions: SPIs would appear to offer a good alternative for patients with severe bone atrophies, especially SPIs fabricated using digital techniques in a single step, presenting promising survival rates and a low complication rate, although more randomized clinical trials with long-term follow-up are needed. Full article