Search Results (27)

Objectives: In the context of the global rise in antimicrobial resistance (AMR), this study aimed to investigate temporal trends in AMR among pathogens isolated from endometrial cultures of patients diagnosed with chronic endometritis (CE). Methods: This cross-sectional study included 244 women consecutively diagnosed with CE at the Gynecology Unit of the University of Bari, Italy, between January 2020 and June 2024. Exclusion criteria were (i) previous CE diagnosis or treatment; (ii) antimicrobial use in the month prior to hysteroscopy and biopsy; (iii) use of oral or vaginal prebiotics/probiotics or contraceptives in the three months prior; (iv) known immunosuppression; and (v) hypersensitivity to quinolones or macrolides. CE was diagnosed using hysteroscopy combined with endometrial histology and microbial culture. Specifically, in cases with hysteroscopic signs suggestive of CE, endometrial biopsies were obtained using a Novak curette and processed for histological and immunohistochemical analyses, as well as for microbial identification and antimicrobial susceptibility testing in accordance with EUCAST guidelines. The primary outcomes were the prevalence of CE-associated pathogens and their AMR profiles. Results: The median age at CE diagnosis was 33 years (range 26–44). The most frequently isolated pathogens were Enterococcus faecalis (26.2%), Escherichia coli (19.3%), and Ureaplasma urealyticum (16.4%). High AMR rates were observed, with increasing trends over time. Ampicillin resistance reached 98.5% (63/64), penicillin resistance 30.8% (16/52), and extended-spectrum beta-lactamase (ESBL) positivity 34.7% (25/72), all with statistically significant trends (p < 0.001). Resistance to commonly used first-line antimicrobials, such as tetracyclines, quinolones, and nitroimidazoles, was also substantial. Conclusions: This study highlights a significant increase in AMRs among microorganisms responsible for CE between 2020 and 2024. As a result, empirical first-line antimicrobial therapies commonly used to treat patients with CE may be increasingly ineffective in a growing number of cases. This underscores the need for improved and targeted diagnostic and therapeutic strategies to effectively manage CE and prevent treatment failures. Strengthening surveillance systems, implementing antimicrobial stewardship programs, and enhancing patient education may help counter the growing threat of AMR. Full article

Objective: This retrospective study aims to evaluate the effect of copper intrauterine device (Cu-IUD) use on the adequacy and diagnostic quality of endometrial biopsy specimens in women with abnormal uterine bleeding (AUB). Patients with levonorgestrel-releasing intrauterine systems (LNG-IUS, e.g., Mirena) were excluded from the study. The study compares the histopathological adequacy of endometrial samples between Cu-IUD users and non-users, highlighting potential interpretation challenges in routine pathological assessment. Methods: The study was conducted on 409 women aged 25–55 who presented with abnormal uterine bleeding (AUB) to the Gynecology and Obstetrics Outpatient Clinic at Kayseri City Hospital between 1 April 2021 and 1 April 2023. The patients were divided into two groups: copper IUD (Cu-IUD) users (n = 215) and non-IUD users (n = 194). Patients using levonorgestrel-releasing intrauterine systems (LNG-IUS, e.g., Mirena) were excluded from the study. Endometrial biopsies were obtained using the Pipelle curette technique without anesthesia, preserved in 10% formalin, and assessed for pathological classification and diagnostic adequacy. Results: The proportion of unclassifiable pathological categories was significantly higher in copper IUD users (63.93%) compared to non-IUD users (36.05%) (p = 0.013). Additionally, a negative correlation was observed between pathological category and endometrial thickness (r = −0.3147, p < 0.001), suggesting that thinner endometrial lining may reflect atrophic or diagnostically ambiguous tissue patterns. However, no significant association was found between IUD use and endometrial thickness (p = 0.073). Conclusions: The findings indicate that copper IUD use may affect the diagnostic adequacy of endometrial biopsy specimens, likely due to inflammatory or structural changes in the endometrium. These results underline the importance of considering IUD-related alterations when interpreting biopsy findings. Further research is needed to refine diagnostic approaches and better understand the clinical implications of these effects. Full article

One of the best restorative treatment options for large carious lesions is the placement of stainless-steel crowns (SSC), but there are few studies evaluating if there is any change in the microbiota in teeth restored with SSCs. In order to asses if any difference exists, 33 children between 4 and 10 years were studied. One primary molar restored with an SSC as well as one healthy primary molar were selected from each child. Subgingival plaque was collected with a curette and cultured on horse blood agar (Columbia) and selective and nonselective media. A quantitative analysis was performed by means of the counting of the colony-forming units per milliliter (cfu/mL) grown in the nonselective media and compared with the bacterial load measured by means of a 16S qPCR with bacterial universal primers. A descriptive statistical analysis was performed to evaluate the results. No significant differences were observed in the total 16S qPCR according to sample type. Streptococci were observed in all the studied children. Porphyromonas gingivalis was observed in 18% of patients and Prevotella intermedia in 42%. Campylobacter was observed in 81% and Neisseria in 88%. C. albicans was observed in only one patient. No significant differences were found between both groups. Part of the child population studied had anaerobic bacteria. There is no clear association between the presence of periodontopathogens and SSC. Full article

The role of blind endometrial sampling, in the era of hysteroscopy-guided biopsy, can be only considered as a screening tool or a first-line approach if a hysteroscopy cannot be performed for whatever reason. Several devices are available, with Perma (a sharp-edged spatula sliding inside a flexible cannula) being one of them. Objectives: The aims of this study were to compare the concordance of blind to visual endometrial sampling, and the influence of operators’ experience on the results. Materials and Methods: Women undergoing hysteroscopy were invited to undergo a Perma biopsy as well. If accepted, a Perma sampling was performed before the hysteroscopy and only if there was no cervical dilatation (as an office setting). The operator was randomly chosen between expert (two staff members) and non-expert (two residents) operators. All cases were collected at the AOU Maggiore della Carità, Novara, Italy. Categorical variables were presented in number and percentage (%) and continuous variables were presented as mean ± SD. The association between categorical variables was evaluated using Fisher’s exact test. Clinical outcomes were analyzed, and the results were first compared within the same patient and subsequent within the doctors’ group (inter- and intra-variation) in terms of Cohen’s Kappa. Results: 82 women performed both hysteroscopy and Perma. A sensitivity of 81.8% and specificity of 100% was found when Perma was compared to hysteroscopy (the gold standard). The comparison between valid vs. invalid samples in terms of sufficient evaluable tissue was not significant (p = 0.583). There are no statistical associations with body mass index, parity, or previous intrauterine surgery related to the outcomes of hysteroscopy and Perma. Cohen’s Kappa between non-experts was 0.43 (moderate), between experts was 0.30 (fair), with the highest concordance being between one non- and one expert (0.68 = substantial). Perma represents a pragmatic diagnostic tool, which could also be used in outpatient. Full article

(1) Background: Musculoskeletal disorders (MSDs), discomfort, fatigue, pain, and other acute and chronic work-related injuries are common among dental clinicians. Hand instruments constitute a primary risk factor for these conditions. The overall goal of this study was to compare in dental hygienists with healthy hands, and in those with MSDs, the effect of three different handle designs on instrumentation-related muscle work, comfort, fatigue, and quality of tactile feedback. (2) Methods: Clinicians tested three periodontal curettes: one with a novel adaptive silicone handle, another with a rigid resin handle, and the third with a rigid silicone handle. Ten hygienists—five with MSDs and five without—each scaled three typodonts using the three different curettes. Statistical analysis was performed using a General Linear Model (GLIM) and Tukey’s post hoc test, and a significance level of p < 0.05 was implemented. (3) Results: On average, mean comfort and fatigue across all instruments were significantly worse in testers with MSDs, who also expended significantly more work to complete the same task. In all testers, a novel adaptive handle design was associated with significantly reduced total muscle work and post-instrumentation fatigue, as well as better comfort than conventional rigid handle designs. (4) Conclusions: An adaptive curette handle design demonstrated significantly better ergonomic outcomes than conventional rigid curette handle designs. Hygienists with MSDs expend significantly more muscle work during dental instrumentation. Full article

Background: The aim of root debridement procedures in non-surgical periodontal treatment is the elimination of etiologic factors that cause periodontal disease, as well as the removal of cement affected by the disease. However, root debridement procedures for the treatment of periodontal diseases produce root surface irregularities that can adversely affect the healing of periodontal tissues. The objective of the present study is to evaluate the surface texture of a root after instrumentation, including an ultrasonic instrument, a Gracey curette, or a double Gracey curette. Methods: A total of 26 single-rooted teeth were used in this study; two specimens were used as controls, and the remaining 24 specimens were equally divided into three groups. Specimens from each group were then subjected to root planing using one of the following instruments: (1) an ultrasonic instrument; (2) a Gracey curette; or (3) a double Gracey curette. The control group was treated with no instrumentation. The extracted teeth were analyzed under a scanning electron microscope and graded in terms of the “roughness and loss of tooth substance index” and the “exposed dentin tubule index.” The SPSS (Statistical Package for Social Sciences) V.21 program was used to conduct a statistical analysis of the data obtained in this study. While evaluating the data, in addition to descriptive statistical methods (mean and standard deviation), a one-way analysis of variance (one-way ANOVA) was carried out to compare the quantitative data and evaluate normally distributed parameters between groups, while a post hoc multiple comparison test was carried out for subgroup comparisons. Results: There was no statistically significant difference between the roughness and material loss on the root surfaces in the samples treated with the ultrasonic instrument or the Gracey curette, and no exposed dentine tubules were observed. Meanwhile, it was observed that the double Gracey curette caused more roughness and material loss on the root surface, and exposed dentine tubules were observed in some samples. The time required for treatment using a double Gracey curette was significantly shorter than that required with the Gracey curette and ultrasonic instruments. Conclusions: The double Gracey curettes produced a relatively rougher root surface than the Gracey curettes or the ultrasonic instrument. Full article

(1) Background: Periodontal instrumentation with dental curettes is associated with discomfort, fatigue, and musculoskeletal diseases. The goal of this study was to compare comfort, fatigue, and muscle work using three different curettes. (2) Methods: Eight hygienists each scaled three typodonts using the three different curettes. Curette A was a prototype with a novel adaptive design, Curette B had a conventional stainless-steel design, and Curette C featured a conventional silicon-covered handle. Time-based work in four muscles, comfort, fatigue, tactile feedback, grip and blade position, and pinch and grasp strength were recorded. Statistical analysis was performed using a General Linear Model (GLIM) and Tukey’s post hoc test. The level of significance was set at p < 0.05. (3) Results: Comfort, correct grasp, fingertip placement, and blade-to-tooth adaptation were significantly better with Curette A (p < 0.05). While pinch and grasp strength were significantly reduced post-instrumentation for Curettes B and C (p < 0.05), they remained unchanged for Curette A. Curette A required significantly less total muscle work and work in individual muscles, resulting in significantly less post-instrumentation fatigue than for Curettes B and C, but similar levels of tactile feedback (p < 0.05). (4) Conclusions: The ergonomic performance of a prototype adaptive periodontal curette was significantly better than that of two conventional instruments with rigid handle designs. Full article

The microbial compositions from concurrent peri-implant and periodontal lesions were compared, since the results reported in the literature on the etiological relationship between these oral pathologies are contradictory. Microbial compositions from nine patients were evaluated using Illumina MiSeq sequencing of 16S rRNA gene amplicons and Principal Components Analysis. Comparisons between the use of curettes or paper points as collection methods and between bacterial composition in both pathologies were performed. Paper points allowed the recovery of a higher number of bacterial genera. A higher bacterial diversity was found in peri-implantitis compared to periodontal samples from the same patient, while a greater number of operational taxonomic units (OTUs) were present in the corresponding periodontal samples. A higher abundance of oral pathogens, such as Porphyromonas or Treponema, was found in peri-implantitis sites. The opposite trend was observed for Aggregatibacter abundance, which was higher in periodontal than in peri-implantitis lesions, suggesting that both oral pathologies could be considered different but related diseases. Although the analysis of a higher number of samples would be needed, the differences regarding the microbial composition provide a basis for further understating the pathogenesis of peri-implant infections. Full article

Background: To compare fatigue, comfort, and muscle work associated with the use of two periodontal curettes during scaling: one with a novel adaptive design, the other with a conventional non-adaptive design. Methods: Twelve hygienists scaled a typodont using two Universal Barnhart 5/6 curettes: (1) a prototype featuring an adaptive silicone-covered handle (Curette A), and (2) a stainless-steel curette (Curette B). Surface Electromyography (sEMG) traced muscle work. Hand positions, fatigue, comfort, pinch, and grasp strength were recorded. Paired t-tests and a repeated measures ANOVA with covariates were tested for differences. The significance level was set at p < 0.05. Results: Curette A performed significantly better in all categories. Pinch and grasp strength and fatigue were significantly reduced post-instrumentation for Curette B. Curette A required significantly less (i) total muscle work and (ii) work in individual muscles. Comfort, correct grasp, and blade adaptation were significantly better using Curette A. Conclusions: A curette featuring a novel adaptive handle design demonstrated significantly improved ergonomic performance. Additional clinical studies are needed to solidify our understanding of the potential short- and long-term benefits of the novel curette handle design. Practical Implications: A novel adaptive curette handle design that enables the clinician to adapt the instrument across the index finger may reduce musculoskeletal burden and fatigue, as well as improve comfort during periodontal instrumentation. Full article

This study evaluated the effects of various mechanical debridement methods on the surface roughness (Ra) of dental implants, comparing femtosecond laser-treated surfaces with conventionally machined and sandblasted with large-grit sand and acid-etched (SLA) implant surfaces. The fabrication of grade 4 titanium (Ti) disks (10 mm in diameter and 1 mm thick) and the SLA process were carried out by a dental implant manufacturer (DENTIS; Daegu, Republic of Korea). Subsequently, disk surfaces were treated with various methods: machined, SLA, and femtosecond laser. Disks of each surface-treated group were post-treated with mechanical debridement methods: Ti curettes, ultrasonic scaler, and Ti brushes. Scanning electron microscopy, Ra, and wettability were evaluated. Statistical analysis was performed using the Kruskal–Wallis H test, with post-hoc analyses conducted using the Bonferroni correction (α = 0.05). In the control group, no significant difference in Ra was observed between the machined and SLA groups. However, femtosecond laser-treated surfaces exhibited higher Ra than SLA surfaces (p < 0.05). The application of Ti curette or brushing further accentuated the roughness of the femtosecond laser-treated surfaces, whereas scaling reduced the Ra in SLA surfaces. Femtosecond laser-treated implant surfaces, with their unique roughness and compositional attributes, are promising alternatives in dental implant surface treatments. Full article

The current study aimed to investigate the effect of the combined Nd-Er: YAG laser on the surgical treatment of peri-implantitis by evaluating clinical markers and biomarkers of bone loss (RANKL/OPG). Twenty (20) patients having at least 1 implant diagnosed with peri-implantitis were randomly assigned to two groups for surgical treatment. In the test group (n = 10), Er: YAG laser was used for granulation tissue removal and implant surface decontamination, while Nd: YAG laser was employed for deep tissue decontamination and biomodulation. In the control group (n = 10), an access flap was applied, and mechanical instrumentation of the implant surface was performed by using titanium curettes. The following clinical parameters were evaluated at baseline and six months after treatment: Full-mouth Plaque Score (FMPS), Probing Pocket Depth (PPD), Probing Attachment Levels (PAL), recession (REC), and Bleeding on probing (BoP). Peri-implant crevicular fluid (PICF) was collected at baseline and six months for the evaluation of soluble RANKL and OPG utilizing enzyme-linked immunosorbent assay (ELISA). Baseline clinical values were similar for both groups, with no statistical differences between them. The study results indicated statistically significant improvements in the clinical parameters during the 6-month observation period in both groups. More specifically, PPD, PAL, and REC were improved in the test and control groups with no differences in the between-groups comparisons. However, a greater reduction in the BoP-positive sites was noted for the laser group (Mean change 22.05 ± 33.92 vs. 55.00 ± 30.48, p = 0.037). The baseline and six-month comparisons of sRANKL and OPG revealed no statistically significant differences between the two groups. The combined Nd: YAG—Er: YAG laser surgical therapy of peri-implantitis seemed to lead to more favorable improvements in regard to bleeding on probing six months after treatment compared to the conventional mechanical decontamination of the implant surface. None of the methods was found superior in the modification of bone loss biomarkers (RANKL, OPG) six months after treatment. Full article

The study aims: 1. To perform diode laser, titanium (Ti) brush, and Ti curette treatment on sandblasted and acid-etched (SLA) Ti surfaces, with/without H₂O₂ and CHX, 2. To investigate the influence of decontamination techniques on implant surface topography and hydrophilicity. Diode laser, Ti brush, and Ti curette treatments were performed on the Grade 4 Ti discs, with/without treatment with 3% H₂O₂ solution or 0.2% CHX. Surface characteristics were investigated via SEM, optical profilometry, and water contact angle meter. SEM findings revealed flat and scratched areas when treated with Ti curette and Ti brush. For diode laser, SEM showed melting in specific areas. Ra and Rt values were lower in all test groups than in the control group (p < 0.05). The adjunctive chemical treatment showed negligible effects in SEM images and surface roughness measurements compared to laser and mechanical treatment-only groups. H₂O₂ treatment resulted in enhanced hydrophilicity in either treatment modalities with a significant difference compared to the negative control group (p < 0.05). In all test groups, the hydrophilicity was enhanced compared to the negative control group (p < 0.05). Diode laser treatment had the least disruptive effect on the Ti surface characteristics. The use of other mechanical methods caused significant alterations in the surface roughness. Full article

In spinal surgery, ultrasonic bone curettes are considered unlikely to cause mechanical injury to the dura; however, there is little evidence to support this claim. We investigated the effect of direct contact with an ultrasonic bone curette on the dura and the protective effect of covering the dura with a cotton pattie using an excised porcine spinal cord. The ultrasonic bone curette was pressed against the porcine spinal cord with constant force and activated for 1 s, with or without covering the dura with a cotton pattie. The dural surface and cross-section were observed using electron and light microscopy. When the ultrasonic bone curette was applied directly against the dura, most specimens showed non-perforating dural injuries. However, none of the specimens showed dural perforation. Histological changes were also observed. The use of a cotton pattie reduced the occurrence of these changes, although it did not prevent them when ultrasonic vibration was applied with a large force. We considered ultrasonic bone curettes to have a low risk of dural perforation and, thus, to be a safe surgical device as long as they did not accidentally make strong contact with the dura. Full article

Objectives: We aimed to demonstrate our modified osteotome sinus floor elevation (OSFE) technique for placing two implants in multiple maxillary posterior edentulous spaces with residual bone height (RBH) < 5 mm, to evaluate the clinical effect and explore the prognosis. Methods: We identified 18 appropriate patients with RBH < 5 mm and 12 patients with RBH ≥ 5 mm. After drill preparation, variously shaped curettes were applied to adequately release the tension of the membrane around the cavity and between two implants by blunt dissection. Then, an osteotome was used to elevate the membrane to the desired height. After filling bone graft into the elevated space, dental implants were inserted. Cone-Beam Computed Tomography (CBCT) was performed after surgery and 6 months later. Results: The implant survival rate was 100%, and after the 6-month resorption, the height of the graft apically between the two implants gradually stabilized at 8.92 mm. Compared with 12 patients with RBH ≥ 5 mm, their graft bone resorption demonstrated no significant difference. Conclusions: It can be suggested that the modified OSFE technique could yield predictable clinical results for placing adjacent implants in patients with RBH less than 5 mm after six months of follow-up. Clinical Significance: Our modified OSFE technique could be applied to place adjacent implants in patients with RBH less than 5 mm, especially for elderly patients or patients with bone crests and vessels on the lateral wall, owing to its advantages including less trauma and fewer complications, minimizing the risk of membrane perforation, shortening the treatment period, avoiding another surgery area or second-stage surgery, improving not only the bone around the implant apex but also between implants, etc. Full article

The use of new prosthetic materials makes it necessary to establish adequate hygienic protocols. It was decided to make prosthetic crowns from four different materials: composite, lithium disilicate, metal ceramic, and zirconium, and to evaluate the effects on the surfaces of four different instruments through SEM and roughness analysis: manual steel curette, manual titanium curette, ultrasonic steel insert, and ultrasonic peek insert. Forty crowns were made, ten of each type of material. For each material, five crowns were manually instrumented with steel inserts (curette 11-12, PDT, Missoula, MT, USA) and titanium (Wingrove 3-4, PDT, Missoula, MT, USA) on the lingual and buccal surfaces, respectively, and the other five crowns were instrumented with an ultrasonic peek insert (ICS-IC1, Mectron, Carasco, Italy) on the buccal surface and steel (PS, EMS, Nyon, Switzerland) on the lingual surface. At this point, surface roughness analysis was carried out. The data were analyzed with a Kolmogorov–Smirnov test. Therefore, it was decided to conduct two analyses with a Kruskal–Wallis test and Bonferroni post hoc test. Then, the instrumented crowns were analyzed by SEM. The analysis of the data shows that the highest average roughness was within the composite group, while the best material appeared to be disilicate. Significant differences existed between the groups, between the materials, and between the different instruments (p-value < 0.05). In the qualitative analysis carried out by SEM, the classic steel insert eliminated the residues of golden finishing. The peek insert created alterations on all tested surfaces. The steel curette did not create particular problems, with the exception of zirconium, where it was possible to observe some scratch lines. Instrumentation with the titanium curette created deeper incisions than the steel curette in the composite and disilicate. The best results came from the ultrasonic steel insert, while the best material appeared to be disilicate. Full article