Search Results (29)

Polymeric micelles are widely studied as nanocarriers for hydrophobic drugs, yet their structural stability under physiological conditions remains a major limitation. This review provides a comparative evaluation of synthetic and natural polymeric micelles with a focus on their stability under dilution and in protein-rich environments. The discussion integrates thermodynamic and kinetic factors governing micelle integrity and examines how molecular composition, hydrophobic segment length, and core–shell modifications influence disintegration behavior. While synthetic micelles commonly collapse below their critical micelle concentration during intravenous administration, natural polymeric micelles, such as those derived from chitosan, alginate, or heparin, exhibit improved resistance to dilution but remain vulnerable to protein-induced destabilization. Strategies such as core or shell cross-linking, surface functionalization, and natural polymer coatings are reviewed as promising approaches to enhance circulation stability and controlled drug release. The work provides a framework for designing micellar systems with balanced biocompatibility, biodegradability, and robustness suitable for clinical drug-delivery applications. Full article

Aiming at the problem that conventional friction reducers used in fracturing cannot simultaneously possess properties such as temperature resistance, salt resistance, shear resistance, rapid dissolution, and low damage. Under the design concept of “medium-low molecular weight, salt-resistant functional monomer, supramolecular physical crosslinking aggregation, and enhanced chain mechanical strength”, acrylamide, sulfonic acid salt-resistant monomer 2-acrylamide-2-methylpropanesulfonic acid, hydrophobic association monomer, and rigid skeleton functional monomer acryloyl morpholine were introduced into the friction reducer molecular chain by free radical polymerization, and combined with the compound suspension technology to develop a new type of multi-functional viscous friction reducer suspension (SAMD), the comprehensive performance of SAMD was investigated. The results indicated that the critical micelle concentration of SAMD was 0.33 wt%, SAMD could be dissolved in 80,000 mg/L brine within 3.0 min, and the viscosity loss of 0.5 wt% SAMD solution was 24.1% after 10 min of dissolution in 80,000 mg/L brine compared with that in deionized water, the drag reduction rate of 0.1 wt% SAMD solution could exceed 70% at 120 °C and still maintained good drag reduction performance in brine with a salinity of 100,000 mg/L. After three cycles of 170 s⁻¹ and 1022 s⁻¹ variable shear, the SAMD solution restored viscosity quickly and exhibited good shear resistance. The Tan δ (a parameter characterizing the viscoelasticity of the system) of 1.0 wt% SAMD solution was 0.52, which showed a good sand-carrying capacity, and the proppant settling velocity in it could be as low as 0.147 mm/s at 120 °C, achieving the function of high drag reduction at low concentrations and strong sand transportation at high concentrations. The viscosity of 1.4 wt% SAMD was 95.5 mPa s after shearing for 120 min at 140 °C and at 170 s⁻¹. After breaking a gel, the SAMD solution system had a core permeability harm rate of less than 15%, while the SAMD solution also possessed the performance of enhancing oil recovery. Compared with common friction reducers, SAMD simultaneously possessed the properties of temperature resistance, salt resistance, shear resistance, rapid dissolution, low damage, and enhanced oil recovery. Therefore, the use of this multi-effect friction reducer is suitable for the development of unconventional oil reservoirs with a temperature lower than 140 °C and a salinity of less than 100,000 mg/L. Full article

To synthesize an effective and versatile nano-platform serving as a promising carrier for controlled drug delivery, visible-light-induced diselenide-crosslinked polyurethane micelles were designed and prepared for ROS-triggered on-demand doxorubicin (DOX) release. A rationally designed amphiphilic block copolymer, poly(ethylene glycol)-b-poly(diselenolane diol-co-isophorone diisocyanate)-b-poly(ethylene glycol) (PEG-b-PUSe-b-PEG), which incorporates dangling diselenolane groups within the hydrophobic PU segments, was initially synthesized through the polycondensation reaction. In aqueous media, this type of amphiphilic block copolymer can self-assemble into micellar aggregates and encapsulate DOX within the micellar core, forming DOX-loaded micelles that are subsequently in situ core-crosslinked by diselenides via a visible-light-triggered metathesis reaction of Se-Se bonds. Compared with the non-crosslinked micelles (NCLMs), the as-prepared diselenide-crosslinked micelles (CLMs) exhibited a smaller particle size and improved colloidal stability. In vitro release studies have demonstrated suppressed drug release behavior for CLMs in physiological conditions, as compared to the NCLMs, whereas a burst release of DOX occurred upon exposure to an oxidation environment. Moreover, MTT assay results have revealed that the crosslinked polyurethane micelles displayed no significant cytotoxicity towards HeLa cells. Cellular uptake analyses have suggested the effective internalization of DOX-loaded crosslinked micelles and DOX release within cancer cells. These findings suggest that this kind of ROS-triggered reversibly crosslinked polyurethane micelles hold significant potential as a ROS-responsive drug delivery system. Full article

Förster resonance energy transfer (FRET) probes are a promising tool for studying numerous biochemical processes. In this paper, we show the application of the FRET phenomenon to observe the micelle formation from surfactants, micelles self-assembling from chitosan grafted with fatty acid (oleic—OA, or lipoic—LA), cross-linking of SH groups in the micelle’s core, and inclusion and release of the model drug cargo from the micelles. Using the carbodiimide approach, amphiphilic chitosan-based polymers with (1) SH groups, (2) crosslinked with S-S between polymer chains, and (3) without SH and S-S groups were synthesized, followed by characterization by FTIR and NMR spectroscopy. Two pairs of fluorophores were investigated: 4-methylumbelliferon-trimethylammoniocinnamate—rhodamine (MUTMAC–R6G) and fluorescein isothiocyanate—rhodamine (FITC–R6G). While FITC–R6G has been described before as an FRET-producing pair, for MUTMAC–R6G, this has not been described. R6G, in addition to being an acceptor fluorophore, also serves as a model cytostatic drug in drug-release experiments. As one could expect, in aqueous solution, FRET effect was poor, but when exposed to the micelles, both MUTMAC–R6G and FITC–R6G yielded a pronounced FRET effect. Most likely, the formation of micelles is accompanied by the forced convergence of fluorophores in the hydrophobic micelle core by a donor-to-acceptor distance (r) significantly closer than in the aqueous buffer solution, which was reflected in the increase in the FRET efficiency (E). Therefore, r(E) could be used as analytical signal of the micelle formation, including critical micelle concentration (CMC) and critical pre-micelle concentration (CPMC), yielding values in good agreement with the literature for similar systems. We found that the r-function provides analytically valuable information about the nature and mechanism of micelle formation. S-S crosslinking between polymer chains makes the micelle more compact and stable in the normal physiological conditions, but loosens in the glutathione-rich tumor microenvironment, which is considered as an efficient approach in targeted drug delivery. Indeed, we found that R6G, as a model cytostatic agent, is released from micelles with initial rate of 5%/h in a normal tissue microenvironment, but in a tumor microenvironment model (10 mM glutathione), the release of R6G from S-S stitched polymeric micelles increased up to 24%/h. Drug-loading capacity differed substantially: from 75–80% for nonstitched polymeric micelles to ~90% for S-S stitched micelles. Therefore, appropriate FRET probes can provide comprehensive information about the micellar system, thus helping to fine-tune the drug delivery system. Full article

We have developed a micellar formulation of anticancer drugs based on chitosan and heparin grafted with lipoic and oleic acids that can release the cytotoxic cargo (doxorubicin) in response to external stimuli, such as increased glutathione concentration—a hallmark of cancer. Natural polysaccharides (heparin and chitosan) provide the pH sensitivity of the nanocarrier: the release of doxorubicin (Dox) is enhanced in a slightly acidic environment (tumor microenvironment). Fatty acid residues are necessary for the formation of nanoparticles (micelles) and solubilization of cytostatics in a hydrophobic core. Lipoic acid residues provide the formation of a labile S-S cross-linking between polymer chains (the first variant) or covalently attached doxorubicin molecules through glutathione-sensitive S-S bridges (the second variant)—both determine Redox sensitivity of the anticancer drugs carriers stable in blood circulation and disintegrate after intracellular uptake in the tumor cells. The release of doxorubicin from micelles occurs slowly (20%/6 h) in an environment with a pH of 7.4 and the absence of glutathione, while in a slightly acidic environment and in the presence of 10 mM glutathione, the rate increases up to 6 times, with an increase in the effective concentration up to 5 times after 7 h. The permeability of doxorubicin in micellar formulations (covalent S-S cross-linked and not) into Raji, K562, and A875 cancer cells was studied using FTIR, fluorescence spectroscopy and confocal laser scanning microscopy (CLSM). We have shown dramatically improved accumulation, decreased efflux, and increased cytotoxicity compared to doxorubicin control with three tumor cell lines: Raji, K562, and A875. At the same time, cytotoxicity and permeability for non-tumor cells (HEK293T) are significantly lower, increasing the selectivity index against tumor cells by several times. Full article

Micellar-nanocarrier-based drug delivery systems possessing characteristics such as an excellent circulation stability, inhibited premature release and on-demand site-specific release are urgently needed for enhanced therapeutic efficacy. Therefore, a novel kind of shell-sheddable core-crosslinked polymeric micelles with pH and oxidation dual-triggered on-demand drug release behavior was facilely constructed. The multifunctional micelles were self-assembled from a carefully designed amphiphilic triblock PEGylated polyurethane (PEG-acetal-PUBr-acetal-PEG) employing an acid-labile acetal linker at the hydrophilic–hydrophobic interface and pendant reactive bromo-containing polyurethane (PU) as the hydrophobic block, followed by a post-crosslinking via oxidation-cleavable diselenide linkages. These well-defined micelles exhibited an enhanced structural stability against dilution, achieved through the incorporation of diselenide crosslinkers. As expected, they were found to possess dual pH- and oxidation-responsive dissociation behaviors when exposure to acid pH (~5.0) and 50 mM H₂O₂ conditions, as evidenced using dynamic light-scattering (DLS) and atomic force microscopy (AFM) analyses. An in vitro drug release investigation showed that the drug indomethacin (IND) could be efficiently encapsulated in the micelles, which demonstrated an inhibited premature release compared to the non-crosslinked ones. It is noteworthy that the resulting micelles could efficiently release entrapped drugs at a fast rate in response to either pH or oxidation stimuli. Moreover, the release could be significantly accelerated in the presence of both acid pH and oxidation conditions, relative to a single stimulus, owing to the synergetic degradation of micelles through pH-induced dePEGylation and oxidation-triggered decrosslinking processes. The proposed shell-sheddable core-crosslinked micelles with a pH and oxidation dual-response could be potential candidates as drug carriers for on-demand drug delivery. Full article

In this study, diselenide (Se–Se) and disulfide (S–S) redox-responsive core-cross-linked (CCL) micelles were synthesized using poly(ethylene oxide)_2k-b-poly(furfuryl methacrylate)_1.5k (PEO_2k-b-PFMA_1.5k), and their redox sensitivity was compared. A single electron transfer-living radical polymerization technique was used to prepare PEO_2k-b-PFMA_1.5k from FMA monomers and PEO_2k-Br initiators. An anti-cancer drug, doxorubicin (DOX), was incorporated into PFMA hydrophobic parts of the polymeric micelles, which were then cross-linked with maleimide cross-linkers, 1,6-bis(maleimide) hexane, dithiobis(maleimido) ethane and diselenobis(maleimido) ethane via Diels–Alder reaction. Under physiological conditions, the structural stability of both S–S and Se–Se CCL micelles was maintained; however, treatments with 10 mM GSH induced redox-responsive de-cross-linking of S–S and Se–Se bonds. In contrast, the S–S bond was intact in the presence of 100 mM H₂O_2, while the Se–Se bond underwent de-crosslinking upon the treatment. DLS studies revealed that the size and PDI of (PEO_2k-b-PFMA_1.5k-Se)₂ micelles varied more significantly in response to changes in the redox environment than (PEO_2k-b-PFMA_1.5k-S)₂ micelles. In vitro release studies showed that the developed micelles had a lower drug release rate at pH 7.4, whereas a higher release was observed at pH 5.0 (tumor environment). The micelles were non-toxic against HEK-293 normal cells, which revealed that they could be safe for use. Nevertheless, DOX-loaded S–S/Se–Se CCL micelles exhibited potent cytotoxicity against BT-20 cancer cells. Based on these results, the (PEO_2k-b-PFMA_1.5k-Se)₂ micelles can be more sensitive drug carriers than (PEO_2k-b-PFMA_1.5k-S)₂ micelles. Full article

This study aims to prepare a novel breast cancer-targeted micelle-based nanocarrier, which is stable in circulation, allowing intracellular drug release, and to investigate its cytotoxicity, apoptosis, and cytostatic effects, in vitro. The shell part of the micelle is composed of zwitterionic sulfobetaine ((N-3-sulfopropyl-N,N-dimethylamonium)ethyl methacrylate), while the core part is formed by another block, consisting of AEMA (2-aminoethyl methacrylamide), DEGMA (di(ethylene glycol) methyl ether methacrylate), and a vinyl-functionalized, acid-sensitive cross-linker. Following this, a targeting agent (peptide (LTVSPWY) and antibody (Herceptin^®)), in varying amounts, were coupled to the micelles, and they were characterized by ¹H NMR, FTIR (Fourier-transform infrared spectroscopy), Zetasizer, BCA protein assay, and fluorescence spectrophotometer. The cytotoxic, cytostatic, apoptotic, and genotoxic effects of doxorubicin-loaded micelles were investigated on SKBR-3 (human epidermal growth factor receptor 2 (HER2)-positive) and MCF10-A (HER2-negative). According to the results, peptide-carrying micelles showed a higher targeting efficiency and better cytostatic, apoptotic, and genotoxic activities than antibody-carrying and non-targeted micelles. Also, micelles masked the toxicity of naked DOX on healthy cells. In conclusion, this nanocarrier system has great potential to be used in different drug-targeting strategies, by changing targeting agents and drugs. Full article

Stable latexes containing unimolecular amphiphilic core-shell star-block polymers with a triphenylphosphine(TPP)-functionalized hydrophobic core and an outer hydrophilic shell based on anionic styrenesulfonate monomers have been synthesized in a convergent three-step strategy by reversible addition-fragmentation chain-transfer (RAFT) polymerization, loaded with [RhCl(COD)]₂ and applied to the aqueous biphasic hydrogenation of styrene. When the outer shell contains sodium styrenesulfonate homopolymer blocks, treatment with a toluene solution of [RhCl(COD)]₂ led to undesired polymer coagulation. Investigation of the interactions of [RhCl(COD)]₂ and [RhCl(COD)(PPh₃)] with smaller structural models of the polymer shell functions, namely sodium p-toluenesulfonate, sodium styrenesulfonate, and a poly(sodium styrenesulfonate) homopolymer in a biphasic toluene/water medium points to the presence of equilibrated Rh-sulfonate interactions as the cause of coagulation by inter-particle cross-linking. Modification of the hydrophilic shell to a statistical copolymer of sodium styrenesulfonate and poly(ethylene oxide) methyl ether methacrylate (PEOMA) in a 20:80 ratio allowed particle loading with the generation of core-anchored [RhCl(COD)TPP] complexes. These Rh-loaded latexes efficiently catalyze the aqueous biphasic hydrogenation of neat styrene as a benchmark reaction. The catalytic phase could be recovered and recycled, although the performances in terms of catalyst leaching and activity evolution during recycles are inferior to those of equivalent nanoreactors based on neutral or polycationic outer shells. Full article

Self-assembly of amphiphilic block copolymers display a multiplicity of nanoscale periodic patterns proposed as a dominant tool for the ‘bottom-up’ fabrication of nanomaterials with different levels of ordering. The present review article focuses on the recent updates to the self-association of amphiphilic block copolymers in aqueous media into varied core-shell morphologies. We briefly describe the block copolymers, their types, microdomain formation in bulk and micellization in selective solvents. We also discuss the characteristic features of block copolymers nanoaggregates viz., polymer micelles (PMs) and polymersomes. Amphiphilic block copolymers (with a variety of hydrophobic blocks and hydrophilic blocks; often polyethylene oxide) self-assemble in water to micelles/niosomes similar to conventional nonionic surfactants with high drug loading capacity. Double hydrophilic block copolymers (DHBCs) made of neutral block-neutral block or neutral block-charged block can transform one block to become hydrophobic under the influence of a stimulus (physical/chemical/biological), and thus induced amphiphilicity and display self-assembly are discussed. Different kinds of polymer micelles (viz. shell and core-cross-linked, core-shell-corona, schizophrenic, crew cut, Janus) are presented in detail. Updates on polymerization-induced self-assembly (PISA) and crystallization-driven self-assembly (CDSA) are also provided. Polyion complexes (PICs) and polyion complex micelles (PICMs) are discussed. Applications of these block copolymeric micelles and polymersomes as nanocarriers in drug delivery systems are described. Full article

Casein microparticles are produced by flocculation of casein micelles due to volume exclusion of pectin and subsequent stabilization by film drying. Transglutaminase post-treatment alters their stability, swelling behavior, and internal structure. Untreated particles sediment due to their size and disintegrate completely after the addition of sodium dodecyl sulfate. The fact that transglutaminase-treated microparticles only sediment at comparable rates under these conditions shows that their structural integrity is not lost due to the detergent. Transglutaminase-treated particles reach an equilibrium final size after swelling instead of decomposing completely. By choosing long treatment times, swelling can also be completely suppressed as experiments at pH 11 show. In addition, deswelling effects also occur within the swelling curves, which enhance with increasing transglutaminase treatment time and are ascribed to the elastic network of cross-linked caseins. We propose a structural model for transglutaminase-treated microparticles consisting of a core of uncross-linked and a shell of cross-linked caseins. A dynamic model describes all swelling curves by considering both casein fractions in parallel. The characteristic correlation length of the internal structure of swollen casein microparticles is pH-independent and decreases with increasing transglutaminase treatment time, as observed also for the equilibrium swelling value of uncross-linked caseins. Full article

Messenger RNA (mRNA) is emerging as a promising therapeutic modality for a variety of diseases. Because of the fragility and limited intracellular access of mRNA, the development of delivery technologies is essential for promoting the applicability of mRNA-based treatments. Among effective nanocarriers, polymeric micelles loading mRNA by polyion complex (PIC) formation with block catiomers have the potential to meet the delivery needs. Since PICs are relatively unstable in in vivo settings, herein, we constructed mRNA-loaded micelles having pH-responsive cross-linked cores by complexing mRNA with cis-aconitic anhydride-modified poly(ethylene glycol)-poly(l-lysine) (PEG-pLL(CAA)) block copolymers. The micelles were stable at physiological pH (pH 7.4) but achieved the complete release of the mRNA at endosomal pH (pH 5.5–4.5). The cross-linking also enhanced the stability of the micelles against disassembly from polyanions and protected the loaded mRNA from degradation by nucleases. Thus, the cross-linked micelles increased the delivery of mRNA to cancer cells, promoting protein expression both in vitro and in vivo. Our results highlight the potential of PEG-pLL(CAA)-based micelles for mRNA delivery. Full article

We report the elaboration of redox-responsive functional micellar nanocarriers designed for triggered release of caffeic acid phenethyl ester (CAPE) in cancer therapy. Three-layered micelles, comprising a poly(ε-caprolactone) (PCL) core, a middle poly(acrylic acid)/poly(ethylene oxide) (PAA/PEO) layer and a PEO outer corona, were prepared by co-assembly of PEO₁₁₃-b-PCL₃₅-b-PEO₁₁₃ and PAA₁₃-b-PCL₃₅-b-PAA₁₃ amphiphilic triblock copolymers in aqueous media. The preformed micelles were loaded with CAPE via hydrophobic interactions between the drug molecules and PCL core, and subsequently crosslinked by reaction of carboxyl groups from PAA and a disulfide crosslinking agent. The reaction of crosslinking took place in the middle layer of the nanocarriers without changing the encapsulation efficiency (EE~90%) of the system. The crosslinked polymeric micelles (CPMs) exhibited superior structural stability and did not release CAPE in phosphate buffer (pH 7.4). However, in weak acidic media and in the presence of 10 mM reducing agent (dithiothreitol, DTT), the payload was released at a high rate from CPMs due to the breakup of disulfide linkages. The physicochemical properties of the nanocarriers were investigated by dynamic and electrophoretic light scattering (DLS and ELS) and atomic force microscopy (AFM). The rapid release of CAPE under intracellular-like conditions and the lack of premature drug release in media resembling the blood stream (neutral pH) make the developed CPMs a promising candidate for controllable drug release in the microenvironment of tumors. Full article

Owing to poor aqueous solubility and low delivery efficiency, most of anti-cancer chemodrugs depend on various smart drug delivery platforms to enhance the treatment efficacy. Herein, a stimuli-responsive supramolecular drug delivery system (SDDS) is developed based on polymeric cyclodextrins (PCD) which crosslinked by stimuli-cleavable drug dimers via host-guest interaction. PEGylated PCD was precisely controlled synthesized by ring-opening polymerization and azide-alkyne click chemistry, and two doxorubicins (DOX) were linked with a disulfide bond to form a drug dimer (ss-DOX). They then co-assembled into supramolecular micelles. Drug dimers were utilized as cross-linkers to stabilize the micelles. The drug loading efficiency was very high that could be up to 98%. The size and morphology were measured by DLS and TEM. Owing to the disulfide bonds of drug dimers, these supramolecular micelles were dissociated by treating with dithiothreitol (DTT). In the meanwhile, the free DOXs were recovered and released from cavities of cyclodextrins because of dynamic equilibrium and hydrophilicity changes. The release profile was studied under mimic physiological conditions. Furthermore, in vitro cytotoxicity study showed excellent anti-cancer efficacy of reduced-responsive supramolecular polymeric micelles. Therefore, it can be served as a safe and stimuli-responsive SDDS for cancer therapy. Full article

In this paper, we present novel well-defined unimolecular micelles constructed a on poly(furfuryl glycidyl ether) core and highly hydrophilic poly(glyceryl glycerol ether) shell, PFGE-b-PGGE. The copolymer was synthesized via anionic ring-opening polymerization of furfuryl glycidyl ether and (1,2-isopropylidene glyceryl) glycidyl ether, respectively. MTT assay revealed that the copolymer is non-cytotoxic against human cervical cancer endothelial (HeLa) cells. The copolymer thanks to furan moieties in its core is capable of encapsulation of nifuratel, a hydrophobic nitrofuran derivative, which is a drug applied in the gynaecology therapies that shows a broad antimicroorganism spectrum. The study shows high loading capacity of the copolymer, i.e., 146 mg of nifuratel per 1 g of copolymer. The load unimolecular micelles were characterized using DLS and TEM microscopy and compared with the reference glyceryl glycerol ether homopolymer sample. The presence of numerous 1,2-diol moieties in the shell of PFGE-b-PGG macromolecules enabled the formation of reversible cross-links with 2-acrylamidephenylboronic acid-based polyacrylamide. The obtained hydrogels were both injectable and self-healable, which was confirmed with a rheological study. Full article