Search Results (33)

This study explores the potential of using sustainable materials in brick manufacturing by designing a novel brick mix in the laboratory, incorporating sand, lime kiln dust (LKD) waste, tyre rubber, and ground granulated blast furnace slag (GGBFS) waste. These cementless bricks blended LKD–GGBFS wastes as the binder agent and fine crumb rubber from waste tyres as a partial replacement for sand in measured increments of 0%, 5%, and 10% by volume of sand. Ordinary Portland cement (OPC) and fired clay bricks were sourced from the industry, and their properties were compared to those of the laboratory bricks. Tests performed on the industry and laboratory bricks included compressive strength (CS), freeze-thaw (F-T), and water absorption (WA) tests for comparison purposes. Additionally, scanning electron microscopy (SEM) and energy-dispersive X-ray spectroscopy (EDS) analyses were performed on the bricks to assess the morphological and mineralogical changes responsible for the observed strengths and durability. The CS and WA values of the engineered bricks were 12, 6, and 4 MPa, and 7, 12, and 15%, respectively, for 0, 5, and 10% crumb rubber replacements. The industry bricks’ average CS and WA values were 13 MPa and 8%, respectively. From the results obtained, the green laboratory bricks passed the minimum strength requirements for load-bearing and non-load-bearing bricks, which can be used to construct small houses. Lastly, the engineered bricks demonstrated strength and durability properties comparable to those of the industry-standard bricks, indicating their potential as a sustainable alternative to help divert waste from landfills, reduce the pressure on natural fine sand extraction, and support eco-conscious brick production for a sustainable environment. Full article

An upward trend has been observed in recent years in which consumers are actively more conscious about finding healthier food alternatives to purchase. Based on the constantly increasing demands of the diabetes food market, a new product of canned peach halves was designed at the Laboratory of Technology & Food Quality & Food Safety of the University of Thessaly through the substitution of sugar with sweetening agents coming from the Stevia plant and Agave syrup. For the production process of the samples the ingredients were carefully selected. Then, the recipes were designed along with the determination of the all the parameters that should be taken into account according to the thermal processing of previous studies. After the completion of the production process, the samples were stored in a dark and cold environment for a 6-month period. Subsequently, the samples were analyzed before and after simulated digestion (INFOGEST protocol) to determine their nutritional characteristics and their microbiological safety. The samples were then given to consumers to test the organoleptic characteristics of the new products. The results of the microbiological, nutritional, organoleptic, and meal tests were analyzed in order to assess the quality of samples. The canned peaches with Stevia had higher bio-availability and liking scores, and resulted in lower post-prandial glucose levels. Full article

Hypertensive disorders of pregnancy affect approximately 5% to 10% of pregnant women. Eclampsia is a serious hypertensive disorder that is primarily characterized by the onset of grand mal seizure activity in the absence of other causative conditions. While eclampsia is diagnosed clinically, laboratory tests are recommended to assess for complications. Treatment strategies for eclampsia focus on controlling seizures and managing hypertension. Acute care during a seizure is critical because of the need for immediate medical interventions, including the management of the airway, breathing, and circulation, as well as ensuring the safety of the patient during convulsions. Magnesium sulfate is the preferred anticonvulsant drug. Care must be taken during administration to prevent magnesium toxicity. Antihypertensive drugs used in eclampsia include labetalol, hydralazine and nifedipine. The definitive treatment of eclampsia is delivery. Close monitoring of both mother and fetus is important to identify any indications for delivery. The timing and mode of delivery depend on obstetric indications, the severity of eclampsia, the gestational age of the fetus, and the overall clinical status of the patient. Neuraxial anesthesia is the anesthesia of choice for conscious, seizure-free, and with stable vital signs women undergoing cesarean section. Full article

The quantification of human DNA extracts from forensic samples plays a key role in the forensic genetics process, ensuring maximum efficiency and avoiding repeated analyses, over-amplified samples, or unnecessary examinations. In our laboratory, we use the Quantifiler^® Trio system to quantify DNA extracts from a wide range of samples extracted from traces (bloodstains, saliva, semen, tissues, etc.), including swabs from touched objects, which are very numerous in the forensic context. This method has been extensively used continuously for nine years, following an initial validation process, and is part of the ISO/IEC 17025 accredited method. In routine practice, based on the quantitative values determined from the extracts of each trace, we use a standard method or a low-copy-number method that involves repeating the amplification with the generation of a consensus genetic profile. Nowadays, when the quantification results are less than 0.003 ng/μL in the minimum extraction volume (40 μL), we do not proceed with the DNA extract analysis. By verifying the limits of the method, we make a conscious cost-benefit choice, in particular by using the least amount of DNA needed to obtain sufficiently robust genetic profiles appropriate for submission to the Italian DNA Forensic Database. In this work, we present a critical re-evaluation of this phase of the method, which is based on the use of standard curves obtained from the average values of the control DNA analysed in duplicate. Considering the various contributions to uncertainty that are difficult to measure, such as manual pipetting or analytical phases carried out by different operators, we have decided to thoroughly investigate the contribution of variability in the preparation of calibration curves to the final results. Thus, 757 samples from 20 independent experiments were re-evaluated using two different standards for the construction of curves, determining the quantitative differences between the two methods. The experiments also determined the parameters of the slope, Y-intercept, R², and the values of the synthetic control probe to verify how these parameters can provide information on the final outcome of each analysis. The outcome of this revalidation demonstrated that it is preferable to use quantification ranges rather than exact quantitative limits before deciding how to analyse the extracts via PCR or forgoing the determination of profiles. Additionally, we present some preliminary data related to the analysis of samples that would not have been analysed based on the initial validation, from which genetic profiles were obtained after applying a concentration method to the extracts. Our goal is to improve the accredited analytical method, with a careful risk assessment as indicated by accreditation standards, ensuring that no source of evidence is lost in the reconstruction of a criminal event. Full article

This study is dedicated to advancing practical and experimental knowledge within sustainable construction and enhancing community productivity, focusing on cattail schoenoplectus californicus, Cyperaceae fibers in Imbabura, Ecuador. The research aims to meticulously analyze and understand cattail fibers’ physical and mechanical properties, characteristics, and potential applications through extensive laboratory testing. The study strives to contribute significantly to the ongoing discussions surrounding sustainable building materials by offering a rich repository of scientific data and insights from our in-depth investigations. Furthermore, we delve into biotechnology and biomimicry, seeking inspiration from the natural world to innovate our construction methodologies. Our exploration also encompasses the technical dimensions of a building, artisanal craftsmanship, eco-conscious design principles, and the evaluation of seismic strength within architectural, structural, and acoustical design frameworks. Through this comprehensive approach, we aspire to illuminate new pathways for employing cattail in sustainable construction practices. Full article

The increasing demand for sustainable products and services has become a constant requirement for the different stakeholders in an organization. Higher Education Institutions (HEI) have a crucial role in training conscious and competent professionals to lead these changes. Chemical analyses laboratories bring together the proper mix, where the adoption of mature and efficient management systems proves to be crucial not only to better train the institutions’ human resources but also to cooperate in recruiting research projects and other services to benefit society. Maturity models assist in the needed stages for sustainable growth to take place. This paper proposes a maturity model based on standardized norms to guide adjustments related to quality, risks, safety, and environment of chemical analyses laboratories in public higher education institutions. This research was done in four stages: theoretical research about maturity models, sustainability, and integrated management systems; survey with laboratories; case study at a chemical analyses laboratory of an HEI; and structuring and validating a maturity model. As the main results, it was observed that more than 80% of public laboratory managers believe it would be relevant to adopt a maturity model to help organize the laboratory’s internal and external processes. 86% of public laboratory managers understand that using management systems can contribute to hiring new services. We can also observe that 42.9% of public laboratory managers do not know any maturity model. As conclusion, the model includes eight dimensions, 31 subdimensions, and 204 management practices to assess and guide chemical analyses laboratories to sustainable maturity levels. Full article

In the field of three-dimensional object design and fabrication, this paper explores the transformative potential at the intersection of biomaterials, biopolymers, and additive manufacturing. Drawing inspiration from the intricate designs found in the natural world, this study contributes to the evolving landscape of manufacturing and design paradigms. Biomimicry, rooted in emulating nature’s sophisticated solutions, serves as the foundational framework for developing materials endowed with remarkable characteristics, including adaptability, responsiveness, and self-transformation. These advanced engineered biomimetic materials, featuring attributes such as shape memory and self-healing properties, undergo rigorous synthesis and characterization procedures, with the overarching goal of seamless integration into the field of additive manufacturing. The resulting synergy between advanced manufacturing techniques and nature-inspired materials promises to revolutionize the production of objects capable of dynamic responses to environmental stimuli. Extending beyond the confines of laboratory experimentation, these self-transforming objects hold significant potential across diverse industries, showcasing innovative applications with profound implications for object design and fabrication. Through the reduction of waste generation, minimization of energy consumption, and the reduction of environmental footprint, the integration of biomaterials, biopolymers, and additive manufacturing signifies a pivotal step towards fostering ecologically conscious design and manufacturing practices. Within this context, inanimate three-dimensional objects will possess the ability to transcend their static nature and emerge as dynamic entities capable of evolution, self-repair, and adaptive responses in harmony with their surroundings. The confluence of biomimicry and additive manufacturing techniques establishes a seminal precedent for a profound reconfiguration of contemporary approaches to design, manufacturing, and ecological stewardship, thereby decisively shaping a more resilient and innovative global milieu. Full article

The development of vegetation in riverbeds is an important part of river engineering, and an in-depth understanding of its hydraulic influence is greatly needed. Our research focuses primarily on common reed (Phragmites australis) in riverbeds. To date, little is known about the hydraulic impact of the Phragmites australis reed and both field and laboratory data are still very scarce. Consequently, the main goal of our study was to evaluate the effect of vegetation zones on the spatial distribution of turbulence. Based on laboratory measurements of local instantaneous velocities, the values of the turbulence intensity (degree) Tu were determined, and its spatial distribution was illustrated. Analysis of the results showed that the relatively dense clusters of plants (reeds) act as “openwork deflectors” of the current and very clearly shape its spatial distribution. This can also be observed in the case of the distribution of the turbulence parameter Tu. For example, in the case of the development of riparian vegetation in the form of quasi-triangular communities of common reed (Phragmites australis) located alternately, there is a channelization of the flow, but also spatial changes in its character that occur. This work only presents results for preliminary hydraulic tests for Phragmites reed. These experiments should also be continued for other species of flexible riparian vegetation such as wicker. In the laboratory, the hydraulic influence of only triangle-shaped vegetation zones has been studied. Therefore, there is also a need for further hydraulic studies on vegetation zones of shapes other than triangular, e.g., rectangular, as well as vegetation zones with irregular shapes The authors see the need for such research and have already planned its continuation. Research on the interactions between vegetation and the structure of water flow in the riverbed is a very important aspect of contemporary trends in river environment management. Conscious, planned, and model-tested locating (or removing) of vegetation in a stream allows for shaping hydraulic and morphological conditions, thus controlling the processes of erosion, transport, and accumulation of debris. Full article

Taking a compassionate approach to the non-human animals used in biomedical research is in line with emerging ideas around a “culture of care”. It is important to expose biomedical sciences students to the concept of a culture of care at an early stage and give them opportunities to explore related practices and ideas. However, there is no simple tool to explore biomedical sciences students’ attitudes towards laboratory animals. Accordingly, there is little understanding of students’ feelings towards these animals, or a means of quantifying potential changes to these feelings. We developed a 12-item questionnaire designed to explore compassion (the Laboratory Animal Compassion Scale; LACS) and used it with UK-based and China-based samples of undergraduate biomedical sciences students. In the same samples, we also explored a harm–benefit analysis task and students’ beliefs regarding some mental characteristics of laboratory animals, then drew correlations with the quantitative measure of compassion. Compassion levels were stable across years of study and were not related to students’ level of experience of working with laboratory animals. We observed a higher level of compassion in females versus males overall, and a higher level overall in the UK-based versus China-based sample. In a task pitting animal suffering against human wellbeing, students’ compassion levels correlated negatively with their acceptance of animal suffering. Compassion levels correlated positively with a belief in animals being conscious and possessing emotions. These data are in line with studies that show compassion is gender- and nationality/culture-dependent, and points to links between compassion, beliefs, and choices. Full article

Over the last few years, a large number of studies have been conducted on the monitoring of human behavior remaining beyond conscious control. One area of application for such monitoring systems is lie detection. The most popular method currently used for this purpose is polygraph examination, which has proven its usefulness in the field and in laboratories, but it is not without its drawbacks. Technological advances in data acquisition and automated analysis have ensured that contactless tools are in high demand in security fields like airport screening or pre-employment procedures. As a result, there has been a shift in interest away from traditional polygraph examinations toward the analysis of facial expressions, voice, and speech patterns, as well as eye-tracking signals to detect deceptive behavior. In this paper, we focus on the last aspect, offer a comprehensive overview of two distinct lie detection methodologies based on eye tracking, and examine the commonly used oculomotor feature analysis. Furthermore, we explore current research directions and their results within the context of their potential applications in the field of forensics. We also highlight future research prospects, suggesting the utilization of eye tracking and scan path interpretation methodologies as a potential fully functional alternative for the conventional polygraph in the future. These considerations refer to legal and ethical issues related to the use of new technology to detect lies. Full article

Hydrogen vehicles, encompassing fuel cell electric vehicles (FCEVs), are pivotal within the UK’s energy landscape as it pursues the goal of net-zero emissions by 2050. By markedly diminishing dependence on fossil fuels, FCEVs, including hydrogen vehicles, wield substantial influence in shaping the circular economy (CE). Their impact extends to optimizing resource utilization, enabling zero-emission mobility, facilitating the integration of renewable energy sources, supplying adaptable energy storage solutions, and interconnecting diverse sectors. The widespread adoption of hydrogen vehicles accelerates the UK’s transformative journey towards a sustainable CE. However, to fully harness the benefits of this transition, a robust investigation and implementation of safety measures concerning hydrogen vehicle (HV) use are indispensable. Therefore, this study takes a holistic approach, integrating quantitative risk assessment (QRA) and an adaptive decision-making trial and evaluation laboratory (DEMATEL) framework as pragmatic instruments. These methodologies ensure both the secure deployment and operational excellence of HVs. The findings underscore that the root causes of HV failures encompass extreme environments, material defects, fuel cell damage, delivery system impairment, and storage system deterioration. Furthermore, critical driving factors for effective safety intervention revolve around cultivating a safety culture, robust education/training, and sound maintenance scheduling. Addressing these factors is pivotal for creating an environment conducive to mitigating safety and risk concerns. Given the intricacies of conducting comprehensive hydrogen QRAs due to the absence of specific reliability data, this study dedicates attention to rectifying this gap. A sensitivity analysis encompassing a range of values is meticulously conducted to affirm the strength and reliability of our approach. This robust analysis yields precise, dependable outcomes. Consequently, decision-makers are equipped to discern pivotal underlying factors precipitating potential HV failures. With this discernment, they can tailor safety interventions that lay the groundwork for sustainable, resilient, and secure HV operations. Our study navigates the intersection of HVs, safety, and sustainability, amplifying their importance within the CE paradigm. Using the careful amalgamation of QRA and DEMATEL methodologies, we chart a course towards empowering decision-makers with the insights to steer the hydrogen vehicle domain to safer horizons while ushering in an era of transformative, eco-conscious mobility. Full article

What influences Information Communications and Technology (ICT) users’ privacy behavior? Several studies have shown that users state to care about their personal data. Contrary to that though, they perform unsafe privacy actions, such as ignoring to configure privacy settings. In this research, we present the results of an in-depth literature review on the factors affecting privacy behavior. We seek to investigate the underlying factors that influence individuals’ privacy-conscious behavior in the digital domain, as well as effective interventions to promote such behavior. Privacy decisions regarding the disclosure of personal information may have negative consequences on individuals’ lives, such as becoming a victim of identity theft, impersonation, etc. Moreover, third parties may exploit this information for their own benefit, such as targeted advertising practices. By identifying the factors that may affect SNS users’ privacy awareness, we can assist in creating methods for effective privacy protection and/or user-centered design. Examining the results of several research studies, we found evidence that privacy behavior is affected by a variety of factors, including individual ones (e.g., demographics) and contextual ones (e.g., financial exchanges). We synthesize a framework that aggregates the scattered factors that have been found in the literature to affect privacy behavior. Our framework can be beneficial to academics and practitioners in the private and public sectors. For example, academics can utilize our findings to create specialized information privacy courses and theoretical or laboratory modules. Full article

Pulses have gained popularity over the past few decades due to their use as a source of protein in food and their favorable impact on soil fertility. Despite being essential to modern agriculture, these species face a number of challenges, such as agronomic crop management and threats from plant seed pathogens. This review’s goal is to gather information on the distribution, symptomatology, biology, and host range of seedborne pathogens. Important diagnostic techniques are also discussed as a part of a successful process of seed health certification. Additionally, strategies for sustainable control are provided. Altogether, the data collected are suggested as basic criteria to set up a conscious laboratory approach. Full article

Athletes use their own perception to monitor distance and regulate their pace during exercise, avoiding premature fatigue before the endpoint. On the other hand, they may also listen to music while training and exercising. Given the potential role of music as a distractor, we verified if music influenced the athletes’ ability to monitor the distance covered during a 20-km cycling time trial (TT20km). We hypothesized that music would elongate cyclists’ perceived distance due to reduced attentional focus on exercise-derived signals, which would also change their ratings of perceived exertion (RPE). We also expected that the motivational role of music would also be beneficial in pacing and performance. After familiarization sessions, ten recreational cyclists performed an in-laboratory TT20km while either listening to music or not (control). They reported their RPE, associative thoughts to exercise (ATE), and motivation when they each perceived they had completed 2-km. Power output and heart rate (HR) were continuously recorded. Cyclists elongated their distance perception with music, increasing the distance covered for each perceived 2 km (p = 0.003). However, music reduced the error of conscious distance monitoring (p = 0.021), pushing the perceived distance towards the actual distance. Music increased the actual distance–RPE relationship (p = 0.004) and reduced ATE (p < 0.001). However, music affected neither performance assessed as mean power output (p = 0.564) and time (p = 0.524) nor psychophysiological responses such as HR (p = 0.066), RPE (p = 0.069), and motivation (p = 0.515). Cyclists elongated their distance perception during the TT20km and changed the actual distance–RPE relationship, which is likely due to a music-distractive effect. Although there was a reduced error of conscious distance monitoring, music affected neither pacing nor performance. Full article

Students’ behaviors have a close relationship with their learning efficiencies, particularly about professional knowledge. Different types of behaviors should have different influences. Disclosing the special relationship between undergraduate students’ conscious safety behaviors in their laboratory experiments with their learning efficiencies is important for fostering them into professional talents. In this study, a course entitled “Advanced Methods of Materials Characterization” was arranged to contain three sections: theoretical learning in the classroom, eight characterization experiments in the laboratory in sequence, and self-training to apply the knowledge. In the final examination, eighteen percent was allocated to the examination questions about safety issues. The students’ scores for this section were associated with their total roll scores. Two quantitative relationships are disclosed. One is between the students’ final examination score (y) and their subjective consciousness of safety behaviors (x) in their laboratory experiments, as y = 5.56 + 4.83 x (R = 0.9192). The other is between their grade point average (y) and safety behavior evaluation (x) as y = 0.51 + 0.15 x (R = 0.7296). Undergraduate students’ behaviors in scientific laboratories need to be verified to have a close and positive relationship with their professional knowledge learning efficiencies. This offers a hint that improving students’ safety behaviors and enhancing their subjective safety awareness are conducive to improving their learning efficiency for professional knowledge. Full article